3-클로로프로피온산-d4산

1.26 (USCG, 1999) - Denser than water; will sink

DENSITY= 1.198 @ 0 °C/4 °C; BP= 155-157 °C /METHYL ESTER/

LEAFLETS FROM PETROLEUM ETHER

CRYSTALS

FREELY SOL IN WATER, ALC, CHLOROFORM

MISCIBLE WITH ETHER

greater than 230 °F (USCG, 1999)

Flash point > 110 °C

392 °F at 760 mmHg (USCG, 1999)

200 °C

106 °F (USCG, 1999)

41 °C

3-chloropropionic acid appears as a white crystalline solid with a sharp odor. Denser than water. (USCG, 1999)

Solid; Somewhat hygroscopic; [Merck Index] White solid; [CAMEO]

Danger

H302 (24.1%): Harmful if swallowed [Warning Acute toxicity, oral]

P203, P260, P264, P270, P280, P301+P317, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P316, P318, P321, P330, P363, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 58 reports by companies from 7 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Danger

H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]

Chemical: Propanoic acid, 3-chloro-

Status: Active Update: 04-01-2021 https://echa.europa.eu/registration-dossier/-/registered-dossier/12262

3-Chloropropionic acid: Does not have an individual approval but may be used under an appropriate group standard

3-CHLOROPROPIONIC ACID reacts exothermically with bases. Reacts with aqueous solutions containing a base and dissolves if neutralization generates a soluble salt. May react with active metals to form gaseous hydrogen and a metal salt. May corrode or dissolve iron, steel, and aluminum parts and containers. Reacts with cyanide salts to generate gaseous hydrogen cyanide. Reacts with diazo compounds, dithiocarbamates, isocyanates, mercaptans, nitrides, and sulfides to generate flammable and/or toxic gases and heat. Reacts with sulfites, nitrites, thiosulfates (to give H2S and SO3), dithionites (SO2), to generate flammable and/or toxic gases and heat. Reacts with carbonates and bicarbonates to generate a harmless gas (carbon dioxide) but some heat. Can be oxidized by strong oxidizing agents and reduced by strong reducing agents. These reactions generate heat. A wide variety of products is possible. May initiate polymerization reactions or catalyze other chemical reactions. Fires produces highly toxic chloride fumes (USCG, 1999).

Acute Tox. 4 (24.1%)

Skin corrosion/irritation - Category 1

Skin corrosion/irritation - Category 1

No person may /transport,/ offer or accept a hazardous material for transportation in commerce unless that person is registered in conformance ... and the hazardous material is properly classed, described, packaged, marked, labeled, and in condition for shipment as required or authorized by ... /the hazardous materials regulations (49 CFR 171-177)./

The International Maritime Dangerous Goods Code lays down basic principles for transporting hazardous chemicals. Detailed recommendations for individual substances and a number of recommendations for good practice are included in the classes dealing with such substances. A general index of technical names has also been compiled. This index should always be consulted when attempting to locate the appropriate procedures to be used when shipping any substance or article.

Used as an intermediate; [Hawley]

CHEMICAL INTERMEDIATE

(1972) No Data

(1975) No Data

(1972) No Data

(1975) No Data

(1972) No Data

(1975) PROBABLY GREATER THAN 4.54X10+5 GRAMS

OXIDATION OF 3-CHLOROPROPIONALDEHYDE WITH NITRIC ACID

PREPARED BY THE HYDROLYSIS OF ETHYLENE CYANOHYDRIN WITH HYDROCHLORIC ACID; BY THE OXIDATION OF BETA-CHLOROPROPIONALDEHYDE OR OF TRIMETHYLENE CHLOROHYDRIN BY NITRIC ACID. MOUREU, CHAUX, ORG SYN 8, 54 (1928); POWELL, ORG SYN 8, 58 (1928); PAAL, LOBECK, BER 64, 2142 (1931).