Huagongshe화공사 화학 정보 인쇄 보고서 · 연구 참고용
폴리테트라히드로푸란
테트라히드로푸란 · 부탄,알파,델타-산화물 · 시클로테트라메틸렌산화물 · 옥사시클로펜탄 · 테트라메틸렌산화물 · 테트라하이드로푸란 · 테트라하이드로퓨란 · 테트라하이드로퓨란250ppmBHT
식별자 및 물리적 특성
| CAS No. | 109-99-9 |
|---|---|
| 분자식 | C4H8O |
| 평균 분자량 | 72.11 g/mol |
| 단동위원소 질량 | 72.05751487 g/mol |
| SMILES | C1CCOC1 |
| InChIKey | WYURNTSHIVDZCO-UHFFFAOYSA-N |
| PubChem CID | 8028 |
| ChEMBL | CHEMBL276521 |
| ChEBI | CHEBI:26911 |
| EC No. | 203-726-8 |
| DTXSID | DTXSID1021328 |
| 현지명 | 테트라하이드로푸란 |
화학 및 물리적 성질
| XLogP | 0.5 |
|---|---|
| 극성 표면적 | 9.2 |
| 수소 결합 공여자 수 | 0 |
| 수소 결합 수용자 수 | 1 |
| 회전 가능 결합 수 | 0 |
| 무거운 원자 수 | 5 |
| 형식 전하 | 0 |
| 복잡도 | 22 |
| LogP(분배 계수) | log Kow = 0.460.46 (estimated) |
| 냄새 | Ether-like odorFAINT FRUITY ODOR미묘함, 2~50ppm에서 검출 가능 |
| 맛 | PUNGENT TASTE |
| 밀도 | 0.888 at 68 °F (USCG, 1999) - Less dense than waterwill float0.8833 g/cu cm at 25 °CSaturated liquid density: 55.230 lb/cu ftsaturated vapor pressure: 2.913 lb/sq insaturated vapor density: 0.03660 lb/cu ft (all at 75 °F)Relative density (water = 1): 0.890.8833 @25 °C0.887 g/mL at 20 °C |
| Viscosity | 0.53 cP at 20 °C0.5 mPa*s at 20 °C |
| Color/Form | Colorless, mobile liquidWater-white liquidColorless liquid |
| 용해도 | greater than or equal to 100 mg/mL at 68 °F (NTP, 1992)Miscible with alcohols, ketones, esters, hydrocarbons, and ethers.Very soluble in acetone, benzene, ether, ethanol, and chloroform30% IN WATER AT 25 °CMiscible in water at 25 °C1000.0 mg/mL물에 용해 |
| Corrosivity | Tetrahydrofuran will attack some forms of plastics, rubber, and coatings. |
| 인화점 | 6 °F (NTP, 1992)-14 °C6 °F (closed cup)-4 °F (open cup)-14.5 °C (closed cup)-14.5 °C c.c.>230 °F |
| 끓는 점 | 151 °F at 760 mmHg (NTP, 1992)65 °C65.00 °C. @ 760.00 mm Hg66 °C65 °C @760 [mm Hg] |
| Decomposition | When heated to decomposition it emits acrid smoke & irritating fumes.Upon contact with air, THF may decompose into explosive peroxides & carbon monoxide. |
| 녹는점 | -163.3 °F (NTP, 1992)-108.44 °C-108.3 °C-108.5 °C-108°C |
| 증기 밀도 | 2.5 (vs air) |
| 증기압 | <0.01 mm Hg ( 25 °C) |
| 굴절률 | n20/D 1.465 |
| 저장 조건 | Store at +5°C to +30°C. |
| 물리적 상태 | 액체 |
| 비중 | 0.89 |
| 색상 | <10(APHA) |
| pH | 7-8 (200g/l, H2O, 20℃) |
| 폭발한계 | 1.5-12.4%(V) |
| 용해도 | 혼용 가능 |
| 비열 | Cp(liquid): 1.72 J/(g·K)Cp(gas): 1.06 J/(g·K), at 25℃ |
| Merck | 14,9211 |
| BRN | 102391 |
| 헨리 상수 | 1.54 (static headspace-GC, Welke et al., 1998) |
| 유전율 | 11.6(-70℃) |
| 안정성 | Stable. Incompatible with halogens, strong oxidizing agents, strong reducing agents, strong bases, oxygen. May generate explosive peroxides in storage if in contact with air. Highly flammable. Store at room temperature under nitrogen. Hazardous polymerisation may occur. Light sensitive. May contain 2,6-di-tertbutyl-4-methylphenol (BHT) as a stabilizer. |
| InChI | 1S/C4H8O/c1-2-4-5-3-1/h1-4H2 |
| InChIKey | WYURNTSHIVDZCO-UHFFFAOYSA-N |
| SMILES | C1CCOC1 |
| LogP(분배 계수) | 0.45 at 25℃ |
| 표면장력 | 27.31mN/m at 293.15K |
| NIST | Furan, tetrahydro-(109-99-9) |
| EPA | Tetrahydrofuran (109-99-9) |
| Absorption | ≤0.0044 at 315nm≤0.005 at 350nm≤0.005 at 400nm≤0.02 at 300nm≤0.046 at 275nm≤0.18 at 250nm≤0.26 at 245nm≤1.0 at 212nm |
화학적 성질
Tetrahydrofuran (THF) is an industrial solvent widely recognized for its unique combination of useful properties. DuPont THF is better than 99.9% pure with a small (0.025-0.040 wt % ) amount of butylated hydroxytoluene (BHT, 4-methyl-2,6-di-tertbutyl phenol) added as an antioxidant. Tetrahydrofuran is a cycloaliphatic ether and is not "photochemically reactive" as defined in Section k of Los Angeles County's Rule 66 (equivalent to Rule 442 of the Southern California Air Pollution Control District). THF has an ethereal odor. The Odor Threshold is listed @ 3.8 (3M), 20-50ppm, and 31ppm. It is also a common laboratory reagent and an intermediate in chemical syntheses of consumer and industrial products such as nutritionals, pharmaceuticals, and insecticides (HSDB, 2011).
안전 및 규제
| GHS 분류 | DangerH225: Highly Flammable liquid and vapor [Danger Flammable liquids]H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposureRespiratory tract irritation]H351: Suspected of causing cancer [Warning Carcinogenicity]P203, P210, P233, P240, P241, P242, P243, P261, P264+P265, P271, P280, P303+P361+P353, P304+P340, P305+P351+P338, P318, P319, P337+P317, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)This chemical does not meet GHS hazard criteria for 0.1% (2 of 1661) of reports. |
|---|---|
| 규제 정보 | Chemical: Furan, tetrahydro-Hazard Traits - CarcinogenicityEnvironmental toxNeurotoxicityAuthoritative List - CWA 303(d)IARC Carcinogens - 2BIRIS NeurotoxicantsProp 65Report - regardless of intended function of ingredient in the productFuran, tetrahydro- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Furan, tetrahydro- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)Status: Active Update: 30-03-2023 https://echa.europa.eu/registration-dossier/-/registered-dossier/15474Status: Active Update: 16-03-2018 https://echa.europa.eu/registration-dossier/-/registered-dossier/22931Furan, tetrahydro-: HSNO Approval: HSR001224 Approved with controlsThe New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.) |
| 기타 안전 정보 | IMAP assessments - Furan, tetrahydro-: Human health tier III assessmentIMAP assessments - Furan, tetrahydro-: Human health tier II assessment |
| 운송 라벨(DOT) | Flammable Liquid |
| 화재 위험 | Special Hazards of Combustion Products: Irritating vapor is generated when heated.Behavior in Fire: May explode. Vapor is heavier than air and may travel considerable distance to a source of ignition and flash back. (USCG, 1999)· HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.CAUTION: Ethanol (UN1170) can burn with an invisible flame. Use an alternate method of detection (thermal camera, broom handle, etc.)· Vapors may form explosive mixtures with air.· Vapors may travel to source of ignition and flash back.· Most vapors are heavier than air. They will spread along the ground and collect in low or confined areas (sewers, basements, tanks, etc.).· Vapor explosion hazard indoors, outdoors or in sewers.· Those substances designated with a (P) may polymerize explosively when heated or involved in a fire.· Runoff to sewer may create fire or explosion hazard.· Containers may explode when heated.· Many liquids will float on water.Highly flammable. Vapour/air mixtures are explosive. |
| 화재 가능성 | Flammable liquid. A very dangerous fire hazard when exposed to heat, flames, oxidizers. |
| 건강 유해성 | Vapors cause nausea, dizziness, headache, and anesthesia. Liquid can de-fat the skin and cause irritation. Liquid also irritates eyes. (USCG, 1999)· Inhalation or contact with material may irritate or burn skin and eyes.· Fire may produce irritating, corrosive and/or toxic gases.· Vapors may cause dizziness or asphyxiation, especially when in closed or confined areas.· Runoff from fire control or dilution water may cause environmental contamination. |
| 유해성 요약 | Anesthesia produced in animal inhalation studiesToxic hepatitis has been reported in exposed workers. TLV Basis is irritation, CNS impairment, and kidney damage. [ACGIH] A skin, eye, and respiratory tract irritantInhalation of high concentrations can cause CNS depression[ICSC]Tetrahydrofuran (THF) is a very hazardous substance due primarily to its flammable and explosive properties. Toxicity is also of concern and must be considered in the safe handling and storage of THF. Irritation from dermal contact with THF warrants the wearing of gloves and safety glasses for protection during the routine handling of this substance. Toxic, as well as flammable, concentrations of THF in air can be avoided by compliance with the TLV of 200 ppm. When this TLV is exceeded, respiratory protection is needed. Protection above the TLV of 50 ppm up to 500 ppm can be provided by a respirator mask using an approved organic vapor cartridge. For emergency situations, such as fires or involving exposure above 500 ppm, a self-contained breathing apparatus would be needed. THF is highly volatile with a low flash point (1 °F) and flammability limit of 2%. Its heavier-than-air vapors can travel at low profile for considerable distances and flash back to the point of origin. Further, unstabilized THF forms peroxides upon exposure to air or light, which, if allowed to accumulate above 1% become thermally explosive. THF also reacts explosively with lithium-aluminum alloys. In consideration of the above, THF should be contained in tightly sealed dark glass bottles or steel drums affixed with the DOT-required label, "Flammable Liquid". Should THF leak from containment vessels, its faint, fruity smell, is detectable at 50 ppm and may serve as a warning. Containers should be stored in cool, dark, well-ventilated areas, away from ignition sources and oxidizing materials. Should a THF fire occur, it may be combated with dry chemical or CO2 extinguishers. Water may be ineffective in firefighting. However, if a leak or spill has not ignited, it may be flushed with water for cooling and diluting if conditions of ignition threaten. Knock down vapors with water spray. Spills or leaks should be absorbed with paper or dissolved in petroleum ether or alcohol (of a higher molecular w |
| 운송 번호 및 가이드(DOT) | 2056 127 |
| FDA 요건 | Tetrahydrofuran is an indirect food additive for use only as a component of adhesives. |
| 반응성 그룹 | Ethers |
| UN 분류 | UN Hazard Class: 3UN Pack Group: II |
| Special Reports | Health & Safety ExecutiveCriteria Document Summaries-Synopses of the Data Used in Setting Occupational Exposure Limits. HSE Books, PO Box 1999, Sudbury, Suffolk, UK C010 6FS (1995) This document contains summaries of the data considered by the Health and Safety Commission of the United Kingdom in setting occupational exposure standards. ...European CommissionOccupational Exposure Limits. Recommendations of the Scientific Expert Group 1991-1992. Office for Official Publications of the European Communities, 2985 Luxembourg. 85pp. (1994). This document contains recommendations of the Scientific Advisory Group for a series of 26 substances ... /which include/ ... proposed occupational exposure limits. ...Toxicology & Carcinogenesis Studies of Tetrahydrofuran in F344/N Rats and B6C3F1 Mice p.6 Technical Report Series No. 475 (1998) NIH Publication No. 98-3965 U.S. Department of Health and Human Services, National Toxicology Program, National Institute of Environmental Health Sciences, Research Triangle Park, NC 27709 |
| 소화 | Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]:CAUTION: The majority of these products have a very low flash point. Use of water spray when fighting fire may be inefficient. CAUTION: For fire involving UN1170, UN1987 or UN3475, alcohol-resistant foam should be used. CAUTION: Ethanol (UN1170) can burn with an invisible flame. Use an alternate method of detection (thermal camera, broom handle, etc.).SMALL FIRE: Dry chemical, CO2, water spray or alcohol-resistant foam.LARGE FIRE: Water spray, fog or alcohol-resistant foam. Avoid aiming straight or solid streams directly onto the product. If it can be done safely, move undamaged containers away from the area around the fire.FIRE INVOLVING TANKS, RAIL TANK CARS OR HIGHWAY TANKS: Fight fire from maximum distance or use unmanned master stream devices or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks in direct contact with flames. For massive fire, use unmanned master stream devices or monitor nozzlesif this is impossible, withdraw from area and let fire burn. (ERG, 2024)Use alcohol-resistant foam, water spray, powder, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water. |
| 응급 조치 | Fresh air, rest. Refer immediately for medical attention.First rinse with plenty of water for at least 15 minutes, then remove contaminated clothes and rinse again. Refer for medical attention .Rinse with plenty of water for several minutes (remove contact lenses if easily possible). Refer for medical attention.Rinse mouth. Refer for medical attention . |
| 누출 비상 조치 | · CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.· Keep unauthorized personnel away.· Stay upwind, uphill and/or upstream.· Ventilate closed spaces before entering, but only if properly trained and equipped.· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.· All equipment used when handling the product must be grounded.· Do not touch or walk through spilled material.· Stop leak if you can do it without risk.· Prevent entry into waterways, sewers, basements or confined areas.· A vapor-suppressing foam may be used to reduce vapors.· Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers.· Use clean, non-sparking tools to collect absorbed material.Large Spill· Dike far ahead of liquid spill for later disposal.· Water spray may reduce vapor, but may not prevent ignition in closed spaces. |
| 응급 처치 | EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.INHALATION: IMMEDIATELY leave the contaminated areatake deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be usedif not available, use a level of protection greater than or equal to that advised under Protective Clothing.INGESTION: DO NOT INDUCE VOMITING. Volatile chemicals have a high risk of being aspirated into the victim's lungs during vomiting which increases the medical problems. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)General First Aid:· Call 911 or emergency medical service.· Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.· Move victim to fresh air if it can be done safely.· Administer oxygen if breathing is difficult.· If victim is not breathing:-- DO NOT perform mouth-to-mouth resuscitationthe victim may have ingested or inhaled the substance.-- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).-- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.· Remove and isolate contaminated clothing and shoes.· For minor skin contact, avoid spreading material on unaffected skin.· In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.· For severe burns, immediate medical attention is required.· Effects of exposure (inhalation, ingestion, or skin contact) to substance may be delayed.· Keep victim calm and warm.· Keep victim under observation.· For further assistance, contact your local Poison Control Center.· Note: Basic Life Support (BLS) and Advanced Life Support (ALS) should be done by trained professionals.Specific First Aid:· Wash skin with soap and water.(General first aid procedures)Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.Skin: Water flush promptly - If this chemical contacts the skin, flush the contaminated skin with water promptly. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water promptly. If irritation persists after washing, get medical attention.Breathing: Respiratory supportSwallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. |
| 안전 보관 | Fireproof. Well closed. Separated from : see Chemical Dangers. |
| Firefighting Hazards | Tetrahydrofuran (THF) is extremely flammable (NFPA rating = 3), and its vapor can travel a considerable distance to an ignition source and "flash back." A 5% solution of THF in water is flammable.Vapor is heavier than air and may travel considerable distance to source of ignition and flash back. |
| 노출 관리 및 개인 보호 | · Wear positive pressure self-contained breathing apparatus (SCBA).· Structural firefighters' protective clothing provides thermal protection but only limited chemical protection.Biological Exposure Indices (BEI) [ACGIH] - Tetrahydrofuran in urine = 2 mg/Lsample at end of shift20.34 [ppm] |
| 소화 절차 | Approach fire from upwind to avoid hazardous vapors and toxic decomposition products. Use water spray, dry chemical, "alcohol resistant" foam, or carbon dioxide. Use water spray to keep fire-exposed containers cool.If material on fire or involved in fire: Do not extinguish fire unless flow can be stopped. Use water in flooding quantities as fog. Solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use "alcohol" foam, dry chemical or carbon dioxide.Closed containers may rupture violently when heated.Wear full protective clothing and positive pressure self-contained breathing apparatus. Teflon barrier recommended. |
| 보관 조건 | Store in a cool, dry, well-ventilated location. Store away from heat, oxidizing materials, and sunlight. Outside or detached storage is preferred. Inside storage should be in a standard flammable liquids storage warehouse, room, or cabinet.Purified tetrahydrofuran should not be stored for more than a few months after its container has been opened if it contains no oxidation inhibitor. In this case, it is potentially explosive because of peroxide formation.NO open flames, NO sparks, and NO smoking. Closed system, ventilation, explosion-proof electrical equipment and lighting. Do NOT use compressed air for filling, discharging, or handling.Distillation or alkali treatment of stabilized tetrahyrofuran removes the involatile anti-oxidant, and the solvent must be restabilized or stored under nitrogen to prevent formation during storage, which should not exceed a few days duration in the absence of stabilizer.THF can be stored in the usual steel containers. |
| 정리 방법 | Evacuate and restrict persons not wearing protective equipment from area of spill or leak until cleanup is complete. Remove all ignition sources. Establish forced ventilation to keep levels below explosive limit. Absorb liquids in vermiculite, dry sand, earth, peat, carbon, or a similar material and deposit in sealed containers. Keep this chemical out of a confined space, such as a sewer, because of the possibility of an explosion, unless the sewer is designed to prevent the build-up of explosive concentrations. It may be necessary to contain and dispose of this chemical as a hazardous waste. If material or contaminated runoff enters waterways, notify downstream users of potentially contaminated waters. Contact your Department of Environmental Protection or your regional office of the federal EPA for specific recommendations.Shut off all possible sources of ignition. Instruct others to maintain a safe distance. Wear breathing apparatus, eye protection, laboratory coat, and butyl rubber gloves. Cover with a 1:1:1 mixture by weight of sodium carbonate or calcium carbonate, clay cat litter (bentonite), and sand. Transfer to a large dish and let evaporate in fume hood. Ventilate area well to evaporate remaining liquid and dispel vapor. Treat solid residue as normal refuse.Absorb with paper. Evaporate completely all spilled surface. Dispose by burning the paper after complete ventilation of vapor. |
| 비화재 누출 대응 | Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]:ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area. All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean, non-sparking tools to collect absorbed material.LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2024) |
| 처리 방법 | Generators of waste (equal to or greater than 100 kg/mo) containing this contaminant, EPA hazardous waste number U213, must conform with USEPA regulations in storage, transportation, treatment and disposal of waste.A good candidate for liquid injection incineration at a temperture range of 650 to 1,600 °C and a residence time of 0.1 to 2 seconds. Also, a good candidate for rotary kiln incineration at a temperature range of 820 to 1,600 °C and residence times of seconds for liquids and gases, and hours for solids. Also, a good candidate for fluidized bed incineration at a temperature range of 450 to 980 °C and residence times of seconds for liquids and gases, and longer for solids.Tetrahydrofuran is a waste chemical stream constituent which may be subjected to ultimate disposal by controlled incineration. In controlled waste containing peroxides, perforation of a container of the waste form a safe distance is followed by open burning./In laboratories/ excess tetrahydrofuran and waste material containing this substance should be placed in an appropriate container, clearly labeled, and handled according to your institution's waste disposal guidelines.For more Disposal Methods (Complete) data for Tetrahydrofuran (6 total), please visit the HSDB record page. |
| 체내 부담 | In 4 urban areas, tetrahydrofuran was detected in Mother's milk in 1 of 12 samples(1). |
| 표적 장기 | DevelopmentalHepaticNervousEyes, respiratory system, central nervous system |
| 생태독성 수치 | LC50Species: Daphnia magna (Water flea, age < or = 24 hr)Conditions: freshwater, static, 20-22 °C, pH 7.6-7.7Concentration: >10,000,000 ug/L for 24 hr /formulated product/Species: Daphnia magna Straus (water flea)Concentration: 5930 mg/L for 24 hrConditions: DIN 38412 Section 11Species: Moina macrocopa (water flea)Concentration: 9800 mg/L for 3 hr /Conditions of bioassay not given/Species: Carassius auratus (goldfish)Concentration: 2400 mg/L for 48 hrConditions: staticFor more Ecotoxicity Values (Complete) data for Tetrahydrofuran (9 total), please visit the HSDB record page. |
| 환경 거동 | TERRESTRIAL FATE: Based on a classification scheme(1), Koc values of 18 and 23(2), indicate that tetrahydrofuran is expected to have very high mobility in soil(SRC). Volatilization of tetrahydrofuran from moist soil surfaces is expected to be an important fate process(SRC) given a Henry's Law constant of 7.05X10-5 atm-cu m/mole(3). Tetrahydrofuran is expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 162 mm Hg at 25 °C(4). Tetrahydrofuran, added to the surface of 2 different soil samples which had been sterilized to prevent microbial degradation, had a disappearance half-life of 5.7 days(5). A 100% of theoretical BOD using activated sludge in the Japanese MITI test(6) suggests that biodegradation is an important environmental fate process in soil(SRC)however, the EEC manometric respirometric method, tested in 22 different laboratories, gave a mean of 34% of the theoretical BOD within 28 days(7).AQUATIC FATE: Based on a classification scheme(1), Koc values of 18 and 23(2), indicate that tetrahydrofuran is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon a Henry's Law constant of 7.05X10-5 atm-cu m/mole(4). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 13 hours and 6.6 days, respectively(SRC). According to a classification scheme(5), an estimated BCF of 3(SRC), from its log Kow of 0.46(6) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low(SRC). In the modified MITI screening test, tetrahydrofuran at 100 mg/L was completely biodegraded in 14 days using an activated sludge inoculum(8)however, the EEC manometric respirometric method, tested in 22 different laboratories, gave a mean of 34% of the theoretical BOD within 28 days(9).ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), tetrahydrofuran, which has a vapor pressure of 162 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase tetrahydrofuran is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicalsthe half-life for this reaction in air is 21 to 24 hours(3), calculated from its measured rate constants of 1.62X10-11 to 1.8X10-11 cu cm/molecule-sec(4). Butyrolactone and alpha-hydroxytetrahydrofuran were formed as products during the photooxidation of tetrahydrofuran(5). Tetrahydrofuran will also react with nitrate radicalsthe half-life for this reaction in air is 3 days(SRC), calculated from its measured rate constant of 4.88X10-15 cu cm/molecule-sec(6). Tetrahydrofuran is moderately reactive in photochemical smog conditions where nitrogen oxides are presentreactions occur in time scales of hours(7-9). |
| 식품 조사 수치 | Tetrahydrofuran has been identified in coffee aroma.Constituent of roasted coffeeTetrahydrofuran was detected as a volatile compound, isolated from floured chickpea seed(1). This compound was identified in the volatile component of cooked chicken(2). |
| 유해 작용 | Neurotoxin - Acute solvent syndromeOccupational hepatotoxin - Primary hepatotoxins: the toxic effect to the liver is the principal adverse effect of the chemical.Nephrotoxin - The chemical is potentially toxic to the kidneys in the occupational setting.IARC Carcinogen - Class 3: Chemicals are not classifiable by the International Agency for Research on Cancer.ACGIH Carcinogen - Confirmed Animal. |
| 노출 경로 | The substance can be absorbed into the body by inhalation of its vapour, by ingestion and through the skin.inhalation, skin and/or eye contact, ingestion |
| Milk Concentrations | ENVIRONMENTAL: In 4 urban areas, tetrahydrofuran was detected in Mother's milk in 1 of 12 samples(1). |
| 독성 요약 | HUMAN TOXICITY: Data pertaining to the toxicity of tetrahydrofuran (THF) in humans is quite limited. The probable oral lethal dose in humans is 50-500 mg/kg. Severe occipital headaches were reported in the testing for pharmacological properties of THF & among technicians performing animal experiments. Toxicity (TCLo) is expected following exposure to a 2.5% concn of THF. ANIMAL TOXICITY: Animal studies indicate that THF is only "MODERATELY TOXIC" from acute exposure with the lowest reported LD50's of 1900-2900 mg/kg by oral route. Median lethal concns by inhalation varied with the duration of exposure but were >20,000 ppm with all species for exposures of 1 hr or less. Reports of animal studies document irritation of the skin & mucous membranes, including the eyes, nose, & upper respiratory tract, as the predominant effect from lower exposures (about 100-200 ppm). High acute doses (about 25,000 ppm) produced anesthesia with delayed induction & recovery periods, accompanied by a fall in blood pressure & strong respiratory stimulation. The margin of safety between anesthesia & death is small. Other effects recorded are those of damage to liver, kidneys, & lung after prolonged exposures to levels of THF >1000 ppm. Toxic manifestations varied somewhat with the route of exposure with irritation of upper respiratory tract observed with inhaled THF & inflammation of the GI tract following oral ingestion. The only report on carcinogenicity is that of a test for skin tumors in which THF was applied to the skin of mice twice/wk for 25 exposures with an observation period of 17.5 months. No carcinogenic effect was observed. THF was negative when tested for mutagenicity using the Ames testhowever, it would appear to enhance the mutagenicity of certain tryptophan-pyrolysate substances. No information is presented on metabolism, absorption, & distribution. The only report on excretion is the finding of THF in mother's milk. |
| Signs and Symptoms | Cough. Burning sensation in the throat and chest. Dizziness. Headache. Nausea. Unconsciousness.Dry skin. Redness. Pain.See Inhalation.irritation eyes, upper respiratory systemnausea, dizziness, headache, central nervous system depression |
| Ongoing Test Status | The following link will take the user to the National Toxicology Program (NTP) Test Agent Search Results page, which tabulates all of the "Standard Toxicology & Carcinogenesis Studies", "Developmental Studies", and "Genetic Toxicity Studies" performed with this chemical. Clicking on the "Testing Status" link will take the user to the status (i.e., in review, in progress, in preparation, on test, completed, etc.) and results of all the studies that the NTP has done on this chemical.[Available from: http://ntp-apps.niehs.nih.gov/ntp_tox/index.cfm?fuseaction=ntpsearch.searchresults&searchterm=109-99-9] |
| Effluent Concentrations | Thirty samples taken between 1973-1976 ranged from 0 ug/L (Olin Corp, Brandenbury, KY, Ohio River/Wabash River) to 450,000 ug/L (General Electric, Mt Vernon, IN, Ohio River). Other notably high concentration were 1000 ug/L (M/T Chem, Carrloton, KY, Ohio River), 850 ug/L (Olin Corp, IN, Ohio River/ Wabash River), and 318 ug/L (Ashtabula, OH).Leachate from the Rochester Municipal Landfill contained tetrahydrofuran at 0.43 mg/L(1). Effluent samples taken from a plant that finished polyester fabrics contained tetrahydrofuran at unreported concentrations(2). Tetrahydrofuran was reported in the vehicle exhaust gases from a gasoline engine at unreported concentrations(3). Effluent from a sewage treatment plant in Barceloneta, Puerto Rico, receiving waste from several pharmaceutical industries contained tetrahydrofuran at unreported concentrations(4). Ambient air samples from 2 of 5 hazardous waste sites in New Jersey contained tetrahydrofuran at unreported concentrations(5).Tetrahydrofuran was detected in 20 of 1043 common household products at unreported concentrations(1). Tetrahydrofuran was identified but not quantified as a volatile organic compound released from textile floor coverings(2). Tetrahydrofuran was identified as a major constituent of polyvinyl chloride primer and adhesive and was found to be leached into the water surrounding bonded joints at concentrations ranging from 215-63,000 ug/L (concentrations given for the first wash for 7 different products)(3)6 and 8 months following polyvinyl chloride pipe installation tetrahydrofuran concentrations in the surrounding water were 13 and 7.5 ppm, respectively(4). Volatile organic compounds measured from a sludge landfill simulator contained tetrahydrofuran at unreported concentrations(5). The concentration of tetrahydrofuran in landfill leachate ranges from 18 to 1,400 ug/L(6). Groundwater sampled under two waste disposal sites in Minnesota contained tetrahydrofuran at concentrations from 24-3900 ug/L(7). Leachates from 3 of 5 landfill sites in Connecticut contained tetrahydrofuranCheshire site at 60 ug/L, Norwich site at 20 ug/L, Danbury site at 330 ug/L(8). |
| RCRA 요건 | U213As stipulated in 40 CFR 261.33, when tetrahydrofuran, as a commercial chemical product or manufacturing chemical intermediate or an off-specification commercial chemical product or a manufacturing chemical intermediate, becomes a waste, it must be managed according to Federal and/or State hazardous waste regulations. Also defined as a hazardous waste is any residue, contaminated soil, water, or other debris resulting from the cleanup of a spill, into water or on dry land, of this waste. Generators of small quantities of this waste may qualify for partial exclusion from hazardous waste regulations (40 CFR 261.5). |
| TSCA 요건 | Section 8(a) of TSCA requires manufacturers of this chemical substance to report preliminary assessment information concerned with production, exposure, and use to EPA as cited in the preamble in 51 FR 41329. Effective date 3/11/94Reporting date: 5/10/95.Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. Tetrahydrofuran is included on this list. Effective date 3/11/94Sunset date: 6/30/98.A testing consent order is in effect for tetrahydrofuran for health effects testing. FR citation: 1/23/95. |
| CERCLA 보고 수량 | Persons in charge of vessels or facilities are required to notify the National Response Center (NRC) immediately, when there is a release of this designated hazardous substance, in an amount equal to or greater than its reportable quantity of 1000 lb or 454 kg. The toll free number of the NRC is (800) 424-8802. The rule for determining when notification is required is stated in 40 CFR 302.4 (section IV.D.3.b). |
| 주 식수 지침 | (MA) MASSACHUSETTS 600 ug/L(NH) NEW HAMPSHIRE 150 ug/L(WI) WISCONSIN 50 ug/L(ME) MAINE 70 ug/L(FL) FLORIDA 4.6 ug/L |
| 직업 노출 등급(OEB) | A |
| 직업 노출 한계(OEL) | TWA: 200 ppm (590 mg/m3), STEL: 250 ppm (735 mg/m3) |
| 수질 위해 등급(WGK) | 1 |
| 즉시 생명 위험 농도 | 2,000 ppm [10% LEL] |
| TSCA 등재 상태 | TSCA listed |
| RTECS 번호 | MD0916000 |
| 운송 번호(UN) | UN 2056 |
| 독성 | LD50 oral (rat) 2880 mg/kg LC50 inhal (rat) 21,000 ppm (3 h) PEL (OSHA) 200 ppm (590 mg/m3) TLV-TWA (ACGIH) 200 ppm (590 mg/m3) STEL (ACGIH) 250 ppm (737 mg/m3) |
| 관세 코드 | 29321100 |
| 위험 문구(R) | 36/37/38-36/37-19-11-40 |
| 위험 표시 | Xi,F,Xn |
| 안전 문구(S) | 26-36-33-29-16-46-37-13 |
| 포장분류 | II |
| 위험 등급 | 3Acute Tox. 4 OralCarc. 2Eye Irrit. 2Flam. Liq. 2STOT SE 3 |
| 기존화학 물질 | KE-33454 |
| F 고인화성물질 | 3-10-23 |
| 자연 발화 온도 | 610 °F |
| 저장 분류 | 3 - Flammable liquids |
| 유해 물질 데이터 | 109-99-9(Hazardous Substances Data) |
용도
용도
테트라 하이드로 푸란 (THF)은 고분자, 특히 폴리 비닐 클로라이드 용 산업용 용매입니다. 그리 냐드 및 금속 수 소화물 반응을위한 반응 매질로서. 부티로 락톤, 숙신산, 1,4- 부탄디올 디 아세테이트의 합성. 조직학 기법의 용매. 그것은 자성 테이프 및 합성 피혁과 같은 코팅 매체에 사용되는 미 경화 및 열가소성 폴리 우레탄의 수지 용매로 사용됩니다. 셀로판 코팅 및 플라스틱 용 인쇄 잉크 외에도 PVC 탑 코팅, 반응기 세척 및 필름 주조에도 사용됩니다.
용도
테트라 하이드로 푸란 (THF)은 또한 접착제, 비닐 필름 및 셀로판, 산업용 수지, 엘라스토머, 코팅 및 인쇄 잉크와 같은 분야에서 다양한 용도로 사용되는 다용도 솔벤트입니다. THF의 구체적인 용도는 PVC 시멘트의 배합입니다. THF 용제 시멘트는 경화 시간을 조절하기 위해 추가 용제 및 무기 충전제로 제형화할 수 있습니다. THF는 조인트 형성 전에 PVC 형 클리너로도 기능 할 수 있습니다. 테트라 하이드로 푸란 (THF)은 세정제, 페인트 제거제 및 스트립 핑 유체, 기능성 유체, 래커 및 코팅제, 접착제 및 기능성 유체 및 부식 방지제의 구성 요소로서 소비자 제품에 사용됩니다. 또한 이러한 목적을 위해 전문적으로 사용됩니다.
용도
고분자 용제, 특히 폴리 염화 비닐. 그리 냐드 및 금속 수 소화물 반응을위한 반응 매질로서. 부티로 락톤, 숙신산, 1,4- 부탄디올 디 아세테이트의 합성. 조직학 기법의 용매.
용도
Tetrahydrofuran is used primarily (80%) to make polytetramethylene ether glycol, the base polymer used primarily in the manufacture of elastomeric fibers (e.g., spandex) as well as polyurethane and polyester elastomers (e.g., artificial leather, skateboard wheels). The remainder (20%) is used in solvent applications (e.g., pipe cements, adhesives, printing inks, and magnetic tape) and as a reaction solvent in chemical and pharmaceutical syntheses.