Ethylene → 1-Hexene

HRID 2367722

반응식

HRID 2367722 반응식
C=C.[CH2:3]=[CH:4][CH2:5][CH2:6][CH2:7][CH3:8]>>[CH2:3]=[CH2:4].[CH2:3]=[CH:4][CH2:5][CH2:6][CH2:7][CH3:8].[CH2:3]=[CH:4][CH2:5][CH2:6][CH2:7][CH3:8]

참가 물질

4

반응물 2

HCID 6325EthyleneHCID 115971-Hexene2회

생성물 2

HCID 115971-HexeneHCID 168324Ethene--hex-1-ene (1/1)

실험 절차

Using a stirring-type autoclave-type continuous reactor with an inner volume of 1.5 L, a mixture of ethylene and 1-hexene, as a raw material gas, was continuously supplied in a rate of 40 kg/hr, so that the composition of 1-hexene was 75% by weight, under maintaining pressure inside the reactor at 130 MPa. In addition, the above catalyst solution was supplied continuously by adjusting supply amount thereof so as to maintain polymerization temperature at 150° C. Production amount of the polymer was about 4.3 kg per hour. After completion of the reaction, the ethylene•1-hexene copolymer (PE-1), with a content of 1-hexene of 24% by weight, an MFR of 35 g/10 min, a density of 0.880 g/cm3, and a Mz/Mn of 3.7, was obtained.

후처리

  1. temperatureunder maintaining pressure inside the reactor at 130 MPa
  2. temperatureso as to maintain
  3. custompolymerization temperature at 150° C
  4. customAfter completion of the reaction

출처 및 근거

ORD 기록
ord-f3611dc3a1c24601b8ca9b5782248957
출처 데이터셋
uspto-grants-2014_04
특허 번호
US08697984B2

연결된 노트

불러오는 중…