1,4-Difluorobenzene → 3-(2,5-Difluorobenzoyl)isonicotinic acid

참여 물질

반응 단계

3,4-Pyridine dicarboxylic acid anhydride (95.7 g, 0.67 mol) and AlCl3 (367.3 g, 2.67 mol) were simultaneously, but separately, added in five portions (one every 15') to boiling 1,4-difluorobenzene (650 mL, 90° C.). After about 1 hour from the last addition, the majority of the 1,4-difluorobenzene was removed by distillation at normal pressure until a thick mass was obtained. The temperature was lowered to 80° C. and nitrobenzene (150 mL) was added in order to dissolve the residual mass. While still hot, the resulting solution was cautiously quenched into ice-cooled and stirred water (1000 g of ice and 530 g of demineralized water) (i.e., slowly drop the solution into the ice water). Then concentrated HCl (37%, 160 mL) was added to the poured mixture at 0°-5° C. and stirring was continued for about 3 hours. A greasy beige precipitate (about 150 g wet) was collected by filtration while the aqueous layer was separated from nitrobenzene and extracted with AcOEt (6x500 mL). Nitrobenzene layer was diluted with petroleum ether (400 mL) and the resulting little amount of precipitate was collected by filtration (about 2 g). Combined extracts were concentrated under vacuum, and the residual crude solid (about 45 g), together with the previously collected precipitates, was suspended into a mixture of AcOEt/petroleum ether (1/1) (600 mL). After about 2 hours at room temperature the suspension was filtered and dried in vacuum to give the mixture of 4-(2',5'-difluorobenzoyl)nicotinic acid and 3-(2',5'-difluorobenzoyl) isonicotinic acid (147.3 g, 84% yield) as a pale beige solid.

출처 및 근거