反应详情

温度

30 °C

To a 500 mL round-bottom flask was added biphenyl-2-ylcarbamic acid 1-[2-(4-[1,3]dioxolan-2-yl-2,5-dimethylphenylcarbamoyl)ethyl]piperidin-4-yl ester (15 g, 27.6 mmol) and acetonitrile (150 mL) to form a slurry. Aqueous 2 M hydrochloric acid (75 mL) was added and the resulting mixture was stirred at 30° C. for 1 hour. The mixture was then cooled to room temperature and ethyl acetate (150 mL) was added. Aqueous 2 M sodium hydroxide (75 mL) was added, the pH was checked and then additional 2 M sodium hydroxide was added until the pH of the solution was in the range of 9 to 10. The layers were separated and the organic layer was washed with diluted brine (75 mL; 1:1 brine/water), dried over anhydrous sodium sulfate and the solvent removed on a rotary evaporator to give biphenyl-2-ylcarbamic acid 1-[2-(4-formyl-2,5-dimethylphenyl-carbamoyl)ethyl]piperidin-4-yl ester (12.5 g, about 98% purity). If desired, the purity of this intermediate can be increased by forming a slurry with ethanol (3 volumes of ethanol), heating the slurry to 80° C., and then cooling slowly to room temperature and isolating by filtration.

1. customto form a slurry
2. temperatureThe mixture was then cooled to room temperature
3. customThe layers were separated
4. washthe organic layer was washed with diluted brine (75 mL; 1:1 brine/water)
5. dry with materialdried over anhydrous sodium sulfate
6. customthe solvent removed on a rotary evaporator