反应详情

温度

55 °C

A suspension of 2-fluoro-N-methyl-4-[7-(quinolin-6-ylmethyl)imidazolo[1,2-b][1,2,4]triazin-2-yl]benzamide (421.2 g, 1.021 mol) (see U.S. Ser. No. 11/942,130 for preparation, the disclosure of which is incorporated herein by reference in its entirety) in methanol (MeOH, 6600 mL) was heated to 55° C. before a premixed solution of aqueous concentrated hydrochloric acid (conc. HCl, 37 wt. %, 12 M, 420 mL, 5.10 mol, 5.0 equiv) in isopropyl alcohol (IPA, 1510 mL) was added dropwise at 55° C. The resulting clear solution was stirred at 55° C. for 30 min before methyl tert-butyl ether (MTBE, 6750 mL) was added via an addition funnel over 30 min. The solids were slowly precipitated out after addition of methyl tert-butyl ether. The resulting mixture was stirred at 55° C. for an additional 1 h before being gradually cooled down to room temperature. The mixture was stirred at room temperature overnight. The solids were collected by filtration, washed with methyl tert-butyl ether (MTBE, 3×500 mL), and dried in vacuum oven at 45-55° C. to constant weight. The desired 2-fluoro-N-methyl-4-[7-(quinolin-6-ylmethyl)imidazolo[1,2-b][1,2,4]triazin-2-yl]benzamide dihydrochloride (470.7 g, 495.5 g theoretical, 95% yield) was obtained as an off-white to light yellow crystalline solid. M.p. (decom.) 222° C.; 1H NMR (400 MHz, DMSO-d6) δ ppm 9.46 (s, 1H), 9.25 (dd, 1H, J=5.4 Hz, 1.4 Hz), 9.12 (d, 1H, J=8.3 Hz), 8.51 (m, 1H), 8.47 (d, 1H, J=0.9 Hz), 8.34 (d, 1H, J=1.3 Hz), 8.23 (s, 1H), 8.21 (dd, 1H, J=9.0 Hz, 1.8 Hz), 8.09-8.02 (m, 3H), 7.79 (dd, 1H, J=7.5 Hz, 8.3 Hz), 4.77 (s, 2H), 2.78 (s, 3H, J=4.5 Hz); 13C NMR (100 MHz, DMSO-d6) δ ppm 163.4, 159.4 (d, J=249.9 Hz), 145.8, 145.4, 144.5, 143.8, 140.4, 138.8, 136.8, 135.9, 135.7 (J=8.6 Hz), 131.2 (J=3.1 Hz), 130.7, 128.7, 128.2, 126.2 (J=14.9 Hz), 126.0, 123.1 (J=3 Hz), 122.5, 121.0, 114.9 (J=5.6 Hz), 28.4, 26.3; 19F NMR (376.3 MHz, DMSO-d6) δ ppm −113.2; C23H17FN6O (free base, MW 412.42), LCMS (EI) m/e 413.1 (M++H) and 435.0 (M++Na).

1. custom11/942,130 for preparation
2. additionwas added dropwise at 55° C
3. additionwas added via an addition funnel over 30 min
4. customThe solids were slowly precipitated out
5. additionafter addition of methyl tert-butyl ether
6. temperaturebefore being gradually cooled down to room temperature
7. stirringThe mixture was stirred at room temperature overnight
8. filtrationThe solids were collected by filtration
9. washwashed with methyl tert-butyl ether (MTBE, 3×500 mL)
10. customdried in vacuum oven at 45-55° C. to constant weight