HRID325390

反应详情

EQUATION

反应方程式

HRID 325390 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

2

CONDITIONS

反应条件

温度
-20 °C

PROCEDURE

实验过程

To dimethylformamide (2.25 g.) was dropwise added phosphorus oxychloride (2.36 g.) under stirring and ice-cooling, and the mixture was stirred for 30 minutes at 40° C. To the mixture was added ethyl acetate (50 ml.), and the mixture was cooled to -20° C. To the mixture was gradually added 2-(2-tert-pentyloxycarbonylamino-1,3-thiazol-4-yl)glyoxylic acid, which can be represented as 2-(2-tert-pentyloxycarbonylimino-2,3-dihydro-1,3-thiazol-4-yl)glyoxylic acid, (4.00 g.) over about 5 minutes at -20° to -10° C. with stirring, and the mixture was further stirred for 40 minutes at the same temperature. Thus obtained mixture was dropwise added to the solution, which was prepared by stirring the mixture of 3-(5-methyl-1,3,4-thiadiazol-2-yl)thiomethyl-7-amino-3-cephem-4-carboxylic acid (5.30 g.) and bis(trimethylsilyl)acetamide (15.4 ml.) in ethyl acetate (100 ml.) for 30 minutes at room temperature and then by cooling to -40° C. The mixture was stirred for 40 minutes at the same temperature and further stirred for 30 minutes at -5° to 0° C. The reaction mixture was poured into 5% sodium bicarbonate aqueous solution, and the aqueous layer was separated. The remaining ethyl acetate layer was extracted twice with 5% sodium bicarbonate aqueous solution (40 ml.). Thus obtained aqueous layers were combined together and washed with ethyl acetate (50 ml.). To the aqueous solution was added ethyl acetate (100 ml.), and pH value of the aqueous portion of the mixture was adjusted to 2 with 10% hydrochloric acid under ice-cooling and stirring. After filtration of the mixture, the ethyl acetate layer was separated. The remaining aqueous layer was extracted twice with ethyl acetate (60 ml.). Thus obtained ethyl acetate layers were combined together, washed with a saturated aqueous solution of sodium chloride and water in turn and then dried over magnesium sulfate. After distillation of the solvent, the remaining residue was pulverized in diethyl ether, collected by filtration, washed with diethyl ether and then dried to give 3-(5-methyl-1,3,4-thiadiazol-2-yl)thiomethyl-7-[2-(2-tert-pentyloxycarbonylamino-1,3-thiazol-4-yl)glyoxylamido]-3-cephem-4-carboxylic acid, which can be represented as 3-(5-methyl-1,3,4-thiadiazol-2-yl)thiomethyl-7-[2-(2-tert-pentyloxycarbonylimino-2,3-dihydro-1,3-thiazol-4-yl)glyoxylamido]-3-cephem-4-carboxylic acid, (3.79 g.).

WORKUP

后处理

  1. temperatureice-cooling
  2. stirringthe mixture was stirred for 30 minutes at 40° C
  3. stirringwith stirring
  4. stirringthe mixture was further stirred for 40 minutes at the same temperature
  5. additionThus obtained mixture was dropwise added to the solution, which
  6. customwas prepared
  7. stirringby stirring
  8. temperatureby cooling to -40° C
  9. stirringThe mixture was stirred for 40 minutes at the same temperature
  10. stirringfurther stirred for 30 minutes at -5° to 0° C
  11. customthe aqueous layer was separated
  12. extractionThe remaining ethyl acetate layer was extracted twice with 5% sodium bicarbonate aqueous solution (40 ml.)
  13. washwashed with ethyl acetate (50 ml.)
  14. additionTo the aqueous solution was added ethyl acetate (100 ml.), and pH value of the aqueous portion of the mixture
  15. temperaturecooling
  16. stirringstirring
  17. filtrationAfter filtration of the mixture
  18. customthe ethyl acetate layer was separated
  19. extractionThe remaining aqueous layer was extracted twice with ethyl acetate (60 ml.)
  20. washwashed with a saturated aqueous solution of sodium chloride and water in turn
  21. dry with materialdried over magnesium sulfate
  22. distillationAfter distillation of the solvent
  23. filtrationcollected by filtration
  24. washwashed with diethyl ether
  25. customdried