反应详情
EQUATION
反应方程式
REACTANTS
反应物
PRODUCTS
生成物
AUXILIARIES
试剂、催化剂与溶剂
CONDITIONS
反应条件
- 温度
- 100 °C
PROCEDURE
实验过程
While a solution of 100 parts of 1-amino-4-bromoanthraquinone-2-carboxylic acid, 1.6 parts of pyridine and 500 parts of orthodichlorobenzene was stirred at room temperature, 87 parts of thionyl chloride was added thereto dropwise over about 30 minutes. After the completion of the addition, the solution was heated at 100° C. for 2 hours. Afterward, excess thionyl chloride was distilled off under reduced pressure, and 88 parts of isopropyl alcohol was added dropwise to the solution at about 80° C. Reaction was performed at the same temperature as above for 2 hours, and the solution was then cooled to room temperature. Afterward, the solution was introduced into 1,000 parts of methanol, followed by stirring for 30 minutes. The resulting precipitate was collected by filtration, washed with methanol and dried, thereby obtaining 90 parts of isopropyl 1-amino-4-bromoanthraquinone-2-carboxylate. To the thus obtained product were added 34 parts of potassium acetate, 3 parts of copper sulfate, 6 parts of benzyl alcohol, 59 parts of m-toludine and 206 parts of dipropylene glycol, and the solution was then heated u to 135° C. in a nitrogen atmosphere and reaction was carried out for 2.5 hours. Afterward, the solution was cooled to 50° C. and was then introduced into 2,000 parts of methanol, followed by enough stirring for 30 minutes. The resulting precipitate was then collected by filtration, introduced into 2,000 parts of methanol again, stirred, filtered, and dried, so that 89 parts of isopropyl 1-amino-4-m-toluidinoanthraquinone-2-carboxylate (melting point 133-134° C.) was obtained.
WORKUP
后处理
- additionAfter the completion of the addition
- distillationAfterward, excess thionyl chloride was distilled off under reduced pressure, and 88 parts of isopropyl alcohol
- additionwas added dropwise to the solution at about 80° C
- customReaction
- customwas performed at the same temperature as above for 2 hours
- temperaturethe solution was then cooled to room temperature
- filtrationThe resulting precipitate was collected by filtration
- washwashed with methanol
- customdried