化工社
首页MCP工作台Skills
首页工作台通知我的
llms.txt · MCP 指南隐私政策 · 服务条款 · 支持v1.8.3
  1. 首页
  2. /化合物

2-甲基-2-丁烯

2-Methyl-2-butene

HCID 10553
新建反应
打印
基本信息概述名称与标识性质安全与法规化学与工业相关反应化合物笔记
子结构检索查找相似结构

基本信息

CAS
513-35-9
标准SMILES
CC=C(C)C
InChIKey
BKOOMYPCSUNDGP-UHFFFAOYSA-N
分子式
C5H10
平均分子量
70.13 g/mol
单同位素质量
70.07825032

概述

2-methyl-2-butene appears as a clear colorless liquid with a petroleum-like odor. Less dense than water and insoluble in water. Hence floats on water. Vapors heavier than air.

名称与标识

首选名称
2-Methyl-2-butene
IUPAC
2-methylbut-2-ene
中文名
2-甲基-2-丁烯
英文名
2-Methyl-2-butene
分子式
C5H10
分子量
70.13

名称与别名

2-Methyl-2-butene2-Methylbut-2-ene513-35-9TrimethylethyleneAMYLENE2-Butene, 2-methyl-beta-Isoamylene3-Methyl-2-butene2-Methylbutene-21,1,2-TrimethylethyleneMethyl buteneMethyl-2-butene, 2-
展开更多名称
Β-异戊Β-異戊烯三甲基乙烯Β-异戊烯Α-異戊烯甲基丁烯类3-甲-2-丁烯beta-异戊烯2-甲基-2-烯2-甲基-2-丁烯PENTENEISOAMYLENE2-methyl-2-buten2-Mdethyl-2-buteneN-AMYLENE
HR68LQ4T3X(CH3)2C=CHCH3NSC-74118DTXSID8027165CHEBI:77916trimethyletheneRefChem:1113611208-156-3

数据库标识

CAS
513-35-9
PubChem CID
10553
DTXSID
DTXSID8027165
ChEBI
CHEBI:28798
UNII
HR68LQ4T3X
EC Number
208-156-3
Nikkaji
J6.280D

性质

结构计算性质

XLogP
2.3
极性表面积
0 Ų
氢键供体
0
氢键受体
0
可旋转键
0
重原子
5
形式电荷
0
复杂度
38

实验与物化性质

Chemical Classes · 2 条

Other Classes -> Aliphatics, Unsaturated

Flammable agents - 4th degree

SpringerMaterials PropertiesBoiling point
LogP2.67
OdorDisagreeable odor
Density · 2 条

0.66 @ 15 °C/4 °C

0.6623 @ 20°C

Viscosity3.1641X10-3 Pa/s @ 139.39 K
Color/Form · 2 条

LIQUID AT ROOM TEMPERATURE

Colorless volatile liquid

Solubility · 2 条

Practically insol in water; miscible with alcohol, ether

Insoluble in water; Soluble in ethanol, ethyl ether, benzene

Flash Point · 2 条

less than 20 °F (NFPA, 2010)

-17.8 °C

Boiling Point · 2 条

37.5-38.5 °C

38.56 °C @760 [mm Hg]

Melting Point

安全与法规

安全信息仅供参考,不能替代供应商安全技术说明书(SDS)、适用法规与专业评估。

GHS分类

GHS Classification · 6 条

This chemical does not meet GHS hazard criteria for 4.1% (14 of 341) of reports.

Danger

H224 (21.4%): Extremely flammable liquid and vapor [Danger Flammable liquids]

P203, P210, P233, P240, P241, P242, P243, P261, P264, P270, P271, P273, P280, P301+P316, P301+P317, P302+P352, P303+P361+P353, P304+P340, P318, P319, P321, P330, P331, P332+P317, P362+P364, P370+P378, P391, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 341 reports by companies from 19 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Danger

危害信息

Regulatory Information · 5 条

Chemical: 2-Butene, 2-methyl-

2-Butene, 2-methyl- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 2-Butene, 2-methyl- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: 2-methylbut-2-ene (EC: 208-156-3)

2-Butene, 2-methyl-: HSNO Approval: HSR001257 Approved with controls

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

Other Safety InformationIMAP assessments - 2-Butene, 2-methyl-: Human health tier I assessment
DOT LabelFlammable Liquid
Fire Hazards · 3 条

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]:

· HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

· HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

化学与工业

药理信息

Metabolism/MetabolitesVolatile hydrocarbons are absorbed mainly through the lungs, and may also enter the body after ingestion via aspiration. (A600)

用途与制造

Uses · 6 条

Used as a chemical intermediate for isoprene and tertiary pentyl alcohol (pharmaceutical solvent); as an additive in high octane fuel manufacture; for hydrogenation, halogenation, alkylation, and condensation reactions; [HSDB] Used as an intermediate in the production of hydrocarbon resins, as a stabilizer for chloroform, and as a component of natural gas and crude oil; [eChemPortal: SIDSUNEP] Was used as an anesthetic in humans; [ACGIH]

Petroleum Production and Refining [Category: Industry]

PRINCIPALLY CHEM INT FOR ISOPRENE; ADDITIVE IN HIGH OCTANE FUEL MFR; CHEM INT FOR THE PHARMACEUTICAL SOLVENT, TERTIARY PENTYL ALCOHOL

Organic synthesis; hydrogenation, halogenation, alkylation, condensation reactions

Octane additive

Pentenes are components of gasoline and are often produced as by-products of catalytic of thermal cracking of petroleum. (L1287)

U.S. Production · 4 条

2023: 25,000,000 - <40,000,000 lb

(1972) 1.45X10+11 GRAMS (PENTENES, MIXED)

(1975) 1.27X10+11 GRAMS (AMYLENES & PENTENES)

(1984) 697,131,000 lbs /Pentenes mixed/

Consumer UsesIntermediate
Industry UsesOther
Methods of Manufacturing · 3 条

DISTILLATION OF A CATALYTICALLY CRACKED GASOLINE STREAM, FOLLOWED BY EXTRACTION WITH AQUEOUS SULFURIC ACID AT LOW TEMP

Prepd by dehydration of tert-amyl alcohol in presence of p-toluenesulfonic acid

... A component of refinery gas.

Formulations/PreparationsGrades: 90%, 95% (Technical), 99% (Pure), & Research.

相关反应

970 条
新建反应记录
HRID 9640 反应方程式
HRID 9640作为反应物
HRID 12586 反应方程式
HRID 12586作为反应物
HRID 13863 反应方程式
HRID 13863作为反应物
HRID 16629 反应方程式
HRID 16629作为反应物
HRID 17075 反应方程式
HRID 17075作为反应物
HRID 17464 反应方程式
HRID 17464作为反应物
HRID 17610 反应方程式
HRID 17610作为反应物
HRID 39430 反应方程式
HRID 39430作为溶剂
上一页第 1 / 122 页

化合物笔记

本页导航基本信息概述名称与标识性质安全与法规化学与工业相关反应化合物笔记
-133.61 °C
Vapor Density2.4 (AIR= 1)

物理化学性质

熔点
134 °C · −134 °C (−209 °F; 139 K)
沸点
39 °C · 39 °C (102 °F; 312 K)
密度
0.662 g/cm3 · 0.662 g/cm3
蒸气密度
2.4 · 2.4 (vs air)
蒸气压
25.7 psi · 25.7 psi ( 55 °C)
折射率
1.385 · 1.385
RTECS号
7580000 · EM7580000
闪点
45 °C · < −45 °C (−49 °F; 228 K)
储存条件
2 · 2-8°C
溶解度
Chloroform, Methanol (Slightly)
形态
liquid
颜色
Colorless
爆炸极限值(explosive limit)
8.7 % · 8.7%
水溶解性
Miscible with alcohol, benzene, ligroin, ethylene oxide and ether. Immiscible with water.
比热容
2.18 J/ · Cp(liquid): 2.18 J/(g·K), at 25℃
Merck
14 · 14,607
BRN
1361353 · 1361353
Henry's Law Constant
5.7 · 5.7×10-5 mol/(m3Pa) at 25℃, Brockbank (2013)
介电常数
2.1 · 2.1(20℃)
稳定性
Volatile
InChI
1S/C5H10/c1-4-5(2)3/h4H,1-3H3
InChIKey
BKOOMYPCSUNDGP-UHFFFAOYSA-N
SMILES
C\C=C(\C)C
LogP
2.67 · 2.67
CAS 数据库
513 · 513-35-9(CAS DataBase Reference)
NIST化学物质信息
2 · 2-Butene, 2-methyl-(513-35-9)
EPA化学物质信息
2 · 2-Methyl-2-butene (513-35-9)

化学性质

无色挥发性液体。熔点-133.77℃,沸点38.4℃,相对密度(20/4℃)0.6623,折光率1.3874,闪点-45℃。溶于醇、醚、苯,不溶于水。久置聚合,有不愉快气味。

Fire Potential
HIGHLY FLAMMABLE
Health Hazards · 3 条

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]:

CAUTION: Petroleum crude oil (UN1267) may contain TOXIC hydrogen sulphide gas.

CAUTION: Petroleum crude oil (UN1267) may contain TOXIC hydrogen sulphide gas.

Hazards Summary · 1 条

Highly flammable liquid that is a simple asphyxiant; [Merck Index] May cause irritation or burns to skin and eyes; [CAMEO] Inhalation of high concentrations can cause CNS depression; A mild skin irritant; [eChemPortal: SIDSUNEP] Animal studies have shown chromosomal damage with inhalation exposures of 3000 ppm and greater. Chromosomal damage (clastogenic effects) is indicated by increases in micronucleated polychromatic erythrocytes in bone marrow. [ACGIH]

DOT ID and Guide · 2 条

1108 128

2460 128

Reactive GroupHydrocarbons, Aliphatic Unsaturated
Reactivity AlertsHighly Flammable
Reactivity Profile · 1 条

2-METHYL-2-BUTENE may react vigorously with strong oxidizing agents. May react exothermically with reducing agents to release gaseous hydrogen. In the presence of various catalysts (such as acids) or initiators, may undergo exothermic polymerization reactions.

DOT Emergency Guidelines · 5 条

/GUIDE 128: FLAMMABLE LIQUIDS (NON-POLAR/WATER-IMMISCIBLE)/ Fire or Explosion: HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a "P" may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. Substances may be transported hot.

/GUIDE 128: FLAMMABLE LIQUIDS (NON-POLAR/WATER-IMMISCIBLE)/ Health: Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution.

/GUIDE 128: FLAMMABLE LIQUIDS (NON-POLAR/WATER-IMMISCIBLE)/ Public Safety: CALL Emergency Response Telephone Number ... . As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. Keep unauthorized personnel away. Stay upwind. Keep out of low areas. Ventilate closed spaces before entering.

/GUIDE 128: FLAMMABLE LIQUIDS (NON-POLAR/WATER-IMMISCIBLE)/ Protective Clothing: Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighters' protective clothing will only provide limited protection.

For more DOT Emergency Guidelines (Complete) data for AMYLENE (8 total), please visit the HSDB record page.

安全与防护

Fire FightingExcerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]:
Accidental Release Measures · 4 条

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 3 条

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]:

General First Aid:

General First Aid:

Exposure Control and Personal Protection · 2 条

· Wear positive pressure self-contained breathing apparatus (SCBA).

· Wear positive pressure self-contained breathing apparatus (SCBA).

Nonfire Spill ResponseExcerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]:
Disposal Methods · 2 条

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

Incineration: Spray into a furnace. Incineration will become easier by mixing with a more flammable solvent.

Preventive MeasuresTO PREVENT EXPLOSION HAZARD, MAXIMUM PERMISSIBLE OLEFIN CONCN IN AIR SHOULD NEVER EXCEED ONE-FIFTH OF THE LOWER EXPLOSIVE LIMIT. /OLEFINS/
Isolation and Evacuation · 3 条

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]:

Immediate precautionary measure

Immediate precautionary measure

Threshold Limit Values (TLV)10.0 [ppm]
Protective Action Criteria (PAC) · 3 条

3.0 [mg/m3]

33 [mg/m3]

200 [mg/m3]

Personal Protective Equipment (PPE)Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]:
Emergency Response Planning Guidelines · 2 条

CAUTION: The majority of these products have a very low flash point. Use of water spray when fighting fire may be inefficient.

CAUTION: The majority of these products have a very low flash point. Use of water spray when fighting fire may be inefficient.

毒理信息

TreatmentTreatment is mainly symptomatic and supportive. Gastric lavage, emesis, and the administration of activated charcoal should be avoided, as vomiting increases the risk of aspiration. (A600)
Health EffectsPetroleum distillates are aspiration hazards and may cause pulmonary damage, central nervous system depression, and cardiac effects such as cardiac arrhythmias. They may also affect the blood, immune system, liver, and kidney. (A600, L1297)
Environmental Fate · 3 条

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 68(SRC), determined from a structure estimation method(2), indicates that amylene is expected to have high mobility in soil(SRC). Volatilization of amylene from moist soil surfaces is expected to be an important fate process(SRC) given a Henry's Law constant of 0.110 atm-cu m/mole(3). The potential for volatilization of amylene from dry soil surfaces may exist based upon a vapor pressure of 468 mm Hg(4).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 68(SRC), determined from a structure estimation method(2), indicates that amylene is not expected to adsorb to suspended solids and sediment in water(SRC). Based on exposure of activated sludge to amylene in the Warburg respirometer test at 20 °C, percent theoretical oxygen demand after 24 hrs was 0.9(3). Volatilization from water surfaces is expected(4) based upon a Henry's Law constant of 0.110 atm-cu m/mole(5). Volatilization half-lives for a model river and model lake are 2.5 and 80 hrs, respectively(SRC), using an estimation method(4). According to a classification scheme(6), an estimated BCF of 23(4,SRC), from a log Kow(7,SRC), suggests the potential for bioconcentration in aquatic organisms is low.

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), amylene, which has a vapor pressure of 468 mm Hg at 25 °C(2), is expected to exist solely in the vapor phase in the ambient atmosphere. Vapor-phase amylene is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 4.4 hrs(SRC), calculated from its rate constant of 8.69X10-11 cu cm/molecule-sec at 25 °C(3). The rate constant for the vapor-phase reaction of amylene with ozone is 4.2X10-16 cu cm/molec sec(4); the half-life for this reaction in air is estimated to be 39 minutes at an atmospheric concn of 7X10+11 molec/cu cm for ozone(5). The rate constant for the vapor-phase reaction of amylene with the nitrate radical is 9.0X10-12 cu cm/molec sec(4); the half-life for this reaction in air is estimated to be 321 seconds at an ambient concn of 2.4X10+8 molec/cu cm at night(5).

Adverse EffectsNeurotoxin - Acute solvent syndrome
Exposure RoutesOral (L400) ; inhalation (L400) ; dermal (L400)
Toxicity SummaryPetroleum distillates are central nervous system depressants and cause pulmonary damage. (A600)
Signs and Symptoms · 1 条

Petroleum distillate poisoning may cause nausea, vomiting, cough, pulmonary irritation progressing to pulmonary edema, bloody sputum, and bronchial pneumonia. At high amounts, central nervous system depression may also occur, with symptoms such as weakness, dizziness, slow and shallow respiration, unconsciousness, and convulsions. Petroleum distillates are also irritating to the skin. (A594)

Effluent Concentrations · 1 条

Emissions from 10 four-stroke lawn mower engines contained 0.26-0.30% amylene by mass of total organic gases(1). Amylene was detected ranging from 8.3-11.4 ppm for YJ93-6E-3 jet engines and 0.02-2.1 ppm for J856E-5B jet engines in exhausts when operated at simulated supersonic flight conditions(2). Amylene was detected in exhaust emitted from alkylate-based fuels, concn not specified(3). Amylene has been reported in stack emissions from waste incineration processes from 1964 to 1979, concn not specified(4). Automobile exhaust, representative of a vehicle operating under normal traffic conditions, was determined to contain 0.1-0.03 ppm of amylene when not irradiated(5).

Soil Adsorption/Mobility · 1 条

Using a structure estimation method based on molecular connectivity indices(1), the Koc for amylene can be estimated to be about 68(SRC). According to a classification scheme(2), this estimated Koc value suggests that amylene is expected to have high mobility in soil.

Atmospheric Concentrations · 3 条

URBAN/SUBURBAN: Amylene was detected ranging from 3.7 to 11.5 ppb in ambient air samples taken around the Tulsa, OK area on July 27, 1978(1). Amylene was also detected in air samples taken from Rio Blanco County, CO ranging from 0.9-3.0 ppb on July 24, 1978 and from air samples taken from the Smokey Mountains ranging from 0.1-3.7 ppb from Sept 25-26, 1978(1). Average exhaust hydrocarbon composition emitted from gasoline fueled vehicles in Sydney, Australia contained 0.5% amylene(2). Under congested city driving conditions (large % of vehicles at idle speed), amylene was detected at 0.45% of total emissions; under urban commuter traffic(ave speed 21.1 mi/hr), amylene was detected at 0.42% of total emissions and under rush hour expressway traffic (ave speed 34.7 mi/hr), amylene was detected at 0.27% of non-methane hydrocarbon emissions along U.S. Highway 70 near Raleigh, NC(3). Amylene concn in the major Tingstad Tunnel in Goteborg, Sweden ranged from 0.25-.41% of total non-methane hydrocarbons from June 27, 1991 to March 11, 1992(4). Amylene was detected in urban air samples taken in Cincinnati in the early afternoon (avg concn 3.8 ppb)(5). Amylene was detected in ambient air samples from Los Angeles, CA in 5 out of 23 samples ranging from 1-4 ppb from Sept 29-Nov 13, 1981(6). Amylene was detected in samples taken from March 12, 1990-March 11, 1991 in urban Washington, DC 48.21% of the time (mean concn 0.2 ppbv)(7). Amylene was detected in air samples from the Caldecott tunnel in San Francisco at 0.43% weight of total VOC's in Aug 1994 and 0.48% weight of total VOC's in Oct 1994(8). Amylene was detected in ambient air samples collected in downtown Houston, TX at concns ranging from 0-91.9 ppbC on Sept 1, 1973, 8.1-67.8 ppbC on Jan 30, 1974, and 0-4.1 ppbC on Apr 2, 1974(9). Amylene was detected in ambient air samples in the central Los Angeles business district during late summer and fall months of 1960, between the hours of 7 and 9 am at concns ranging from 0.002-0.018 ppm(10). Amylene was detected in air samples taken from various sites in Sydney Australia during the morning hours from Sept 1979 to June 1980 (avg concn 1.3 ppbV)(11). Amylene was detected at Huntington Park, CA on Oct 22, 1968 ranging from 0-4.2 ppb(12). Amylene was detected in air samples taken from Boone, NC (population 10,000) ranging from 0.1-4.1 ppb(13).

URBAN/SUBURBAN: The concn of amylene in air samples collected from 39 different U.S. cities from June to Sept of 1984-1986 from 0600 to 0900 averaged 0.4 ppb(1). Amylene has been reported to be 0.27% by mass of VOC emissions in 1990 in the United Kingdom(2). Amylene was detected, concn not specified, in 2 of 15 industrial area air samples taken in Riverside, CA(3). Amylene has been detected, concn not specified, in ambient air samples in Riverside, CA on Aug 21, 1969(4). Gas-phase reaction of amylene with the NO3 radical (concn ranging from 3.8-4.2X10+13 molec/cu cm) produced acetaldehyde, acetone, 2,2,3-trimethyloxirane, 3-methyl-3-nitroxy-2-butanone and 3-methyl-2-butanone. It was also found that the percent distribution of products was highly dependent upon pressure(5).

Artificial Pollution Sources · 1 条

Amylene's production and use in organic syntheses(1) or as an octane additive(2) may result in its release to the environment through various waste streams(SRC). Industry gasoline, EPA certification gasoline and M-85 (85% methanol and 15% gasoline) contain 1.032%, 0.617%, and 0.142% of amylene, respectively(2). Whole gas of 87-89 octane contains 1.16% by weight amylene(3).

Environmental BiodegradationAEROBIC: Based on exposure of activated sludge to amylene in the Warburg respirometer test at 20 °C, percent theoretical oxygen demand after 24 hrs was 0.9(1).

安全数据

wgk
3
tsca
TSCA listed
包装类别
II
危险等级
3
存储类别
3 - Flammable liquids
安全说明
45-9-61-33-16-36/37/39-26-62-36/37
海关编码
2901299090
危险品标志
F,Xn,N,F+
危险性类别
Acute Tox. 4 OralAquatic Chronic 2Asp. Tox. 1Flam. Liq. 1Muta. 2STOT SE 3
危险类别码
11-22-65-51/53-12-36/37/38-19-68-67-38-52/53-40-36/37
毒害物质数据
513-35-9(Hazardous Substances Data)
危险品运输编号
UN 2460
General Manufacturing Information · 3 条

Petrochemical Manufacturing

2-Butene, 2-methyl-: ACTIVE

At one time it was used without success as a human anesthetic but produced better results in dentistry.

应用领域

简介2-甲基-2-丁烯是一种高度易燃、挥发性的无色液体,难溶于水,可用于脱氢制异戊二烯,也作为合成橡胶、树脂和有机合成的中间体。

用途2-甲基-2-丁烯可用于脱氢制异戊二烯,也作为合成橡胶、树脂和有机合成的中间体。提高汽油辛烷值的掺合剂。气相色谱对比样品。

制备方法

生产方法在炼油厂催化裂化汽油的碳五馏分中异戊烯(包括三种异构体)约占34%,在石油化工厂裂解制乙烯的副产碳五馏分中,异戊烯约占9%。在用溶剂法从碳五馏分中抽提异戊二烯时,可以分离制得异戊烯。

上下游产品信息

上游原料

3-甲基-1-丁烯碳五馏分异戊二烯對三級戊苯胺1,2,4-三甲基苯2-丁烯2-甲基-1-丁烯顺戊间二烯

下游产品

β-胡萝卜素n,n-二甲基亚甲基碘化胺三唑酮频那酮(3,3-二甲基丁酮-2)2,2-二甲基丁酸3,4,4-三甲基环戊-2-烯酮3-乙基-2-戊烯2-甲基-2戊烯2-甲基-2-丁硫醇

RURAL/REMOTE: From January 1-6, 1978 amylene was detected in Jones State forest, 38 miles north of Houston, TX, in a range of 0.1-7.1 ppbC(1). Amylene has been detected in ambient air samples taken from rural southern Appalachian Mountains of northwestern North Carolina from Sept 1981-Oct 1982 (concns ranging from 0-0.7 ppb)(2).