HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

4-Cumylphenol

HCID 11742
New reaction
Print

Completing data — refresh the page later to see the latest

Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
599-64-4
Standard SMILES
CC(C)(c1ccccc1)c1ccc(O)cc1
InChIKey
QBDSZLJBMIMQRS-UHFFFAOYSA-N
Molecular formula
C15H16O
Average molar mass
212.29 g/mol
Monoisotopic mass
212.12011513

Overview

P-Cumylphenol is a diarylmethane.

Names & identifiers

Preferred name
4-Cumylphenol
IUPAC
4-(2-phenylpropan-2-yl)phenol
English name
4-CUMYLPHENOL
Molecular formula
C15H16O
Molecular weight
212.29

Names & synonyms

4-Cumylphenol599-64-4p-CumylphenolPhenol, 4-(1-methyl-1-phenylethyl)-4-(Dimethylphenylmethyl)phenol4-Hydroxydiphenyldimethylmethane2-Phenyl-2-(4-hydroxyphenyl)propanep-(alpha,alpha-Dimethylbenzyl)phenolPhenol, 4-(1-methyl-1-phenethyl)-4-(1-methyl-1-phenyl-ethyl)phenolDTXSID30225362RLA3OL3QT
Show more names
PCPCumyl phenol4-α-CumylphenolPARA-CUMYLPHENOLAURORA 4778paracumilphenolAKOS BBS-00008036
Phenol, p-(alpha,alpha-dimethylbenzyl)-NSC-6237DTXCID502536p-[alpha,alpha-dimethylbenzyl)phenolRefChem:858043209-968-04-(2-phenylpropan-2-yl)phenol4-alpha-Cumylphenol

Database identifiers

CAS
599-64-4
PubChem CID
11742
DTXSID
DTXSID3022536
ChEMBL
CHEMBL194805
ChEBI
CHEBI:35092
UNII
2RLA3OL3QT
EC Number
209-968-0
Nikkaji
J6.797K

Properties

Computed structural propertiesFilling in

XLogP
3.7
Topological polar surface area
20.2 Ų
Hydrogen bond donors
1
Hydrogen bond acceptors
1
Rotatable bonds
2
Heavy atoms
16
Formal charge
0
Complexity
207

Experimental & physicochemical properties

Chemical ClassesSemi-Volatile Organic Compound (SVOC) and(or) Waste-water effluent contaminant
DrugsPharmaceuticals -> Listed in ZINC15
PolymersPlastics & Rubber -> Epoxy Resins
SpringerMaterials PropertiesFusion temperature
LogP4.31
OdorCharacteristic phenol odor
Density1.115 g/mL at 25 °C
Color/Form · 2 items

White to tan crystals

Prisms from petroleum ether

Endocrine DisruptorsPotential endocrine disrupting compound
Boiling Point335 °C
Decomposition

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

This chemical does not meet GHS hazard criteria for 0.4% (1 of 253) of reports.

Danger

H302 (51.8%): Harmful if swallowed [Warning Acute toxicity, oral]

P260, P261, P264, P264+P265, P270, P271, P273, P280, P301+P317, P302+P352, P304+P340, P305+P351+P338, P305+P354+P338, P317, P319, P321, P330, P332+P317, P337+P317, P362+P364, P391, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 253 reports by companies from 18 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Warning

Hazard information

Regulatory Information · 3 items

Chemical: Phenol, 4-(1-methyl-1-phenylethyl)-

Phenol, 4-(1-methyl-1-phenylethyl)- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Phenol, 4-(1-methyl-1-phenylethyl)- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: 4-(α,α-dimethylbenzyl)phenol (EC: 209-968-0)

Hazards SummaryMay cause serious eye injury; Harmful by ingestion; [ECHA REACH Registrations] A skin and strong eye irritant; [Alfa Aesar MSDS] See Bisphenol A.
Hazard Classes and Categories · 2 items

Acute Tox. 4 (51.8%)

Acute toxicity (Oral) - Category 4

Safety & protection

Disposal Methods · 1 item

Chemistry & industry

Uses & manufacturing

Uses · 4 items

Used to make resins, insecticides, lubricants, polycarbonates, and surfactants; [HSDB] Used as an intermediate; [ECHA REACH Registrations]

Intermediate for resins, insecticides, lubricants

The major use of phenol, 4-(1-methyl-1-phenethyl)- (which is commonly known as 4-cumylphenol) is as a chain terminator for polycarbonates ... Other uses include the production of phenolic resins, some of which have applications in the electronics industry; another application involves its reaction with ethylene oxide to form a specialty surfactant.

... p-Cumylphenol can be condensed with formaldehyde to give acid- and base-resistant resins. p-Cumylphenol of high purity ... serves as a molecular-mass controlling component in the production of polycarbonates.

U.S. Production · 4 items

2023: 40,000,000 - <55,000,000 lb

Phenol, 4-(1-methyl-1-phenylethyl)- is listed as a High Production Volume (HPV) chemical (65FR81686). Chemicals listed as HPV were produced in or imported into the U.S. in >1 million pounds in 1990 and/or 1994. The HPV list is based on the 1990 Inventory Update Rule. (IUR) (40 CFR part 710 subpart B; 51FR21438).

Production volumes for non-confidential chemicals reported under the Inventory Update Rule.[Table#8067]

Production volume for non-confidential chemicals reported under the 2006 Inventory Update Rule. Chemical: Phenol, 4-(1-methyl-1-phenylethyl)-. Aggregated National Production Volume: 10 to < 50 million pounds.

Consumer UsesIntermediate
Industry UsesTerminator/Blocker
Methods of Manufacturingp-Cumylphenol is formed to a certain extent during acid-catalyzed cleavage of cumene hydroperoxide. The high boiling still bottoms of phenol-acetone plants are a potential source for this aralkylphenol, which is, however, not exploited.
General Manufacturing Information · 2 items

Petroleum Refineries

Phenol, 4-(1-methyl-1-phenylethyl)-: ACTIVE

Related reactions

35 records
New reaction record
HRID 198559 reaction equation
HRID 198559As reactant
HRID 229614 reaction equation
HRID 229614As reactant
HRID 237784 reaction equation
HRID 237784As reactant
HRID 399044 reaction equation
HRID 399044As reactant
HRID 459085 reaction equation
HRID 459085As reactant
HRID 459097 reaction equation
HRID 459097As reactant
HRID 459133 reaction equation
HRID 459133As reactant
HRID 459378 reaction equation
HRID 459378As reactant
PreviousPage 1 of 5

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
When heated to decomposition it emits acrid acid and irritating vapors.
Melting Point74.5 °C

Physicochemical properties

Melting point
74 · 74-76 °C (lit.)
Boiling point
335 °C · 335 °C (lit.)
Density
1 · 1,115 g/cm3
vapor pressure
0 Pa · 0Pa at 25℃
refractive index
1.5725 · 1.5725 (estimate)
Flash point
160 °C · 160 °C
storage temp.
Inert atmosphere,Room Temperature
solubility
DMSO (Slightly), Methanol (Slightly)
pka
10.62 · 10.62±0.10(Predicted)
form
Solid
color
White to Off-White
Water Solubility
18 mg/L · 18mg/L at 22℃
BRN
1870517 · 1870517
Henry's Law Constant
1.1 · 1.1×102 mol/(m3Pa) at 25℃, HSDB (2015)
Stability
Stable. Incompatible with oxidizing agents, acid chlorides, acid anhydrides. Combustible.
InChI
1S/C15H16O/c1-15(2,12-6-4-3-5-7-12)13-8-10-14(16)11-9-13/h3-11,16H,1-2H3
InChIKey
QBDSZLJBMIMQRS-UHFFFAOYSA-N
SMILES
CC(C)(c1ccccc1)c2ccc(O)cc2
LogP
3.8 at · 3.8 at 22℃
CAS DataBase Reference
599 · 599-64-4(CAS DataBase Reference)
Indirect Additives used in Food Contact Substances
P-CUMYLPHENOL
FDA 21 CFR
177.158 · 177.1580; 177.1585
EWG's Food Scores
1 · 1
FDA UNII
2 RLA3OL3QT · 2RLA3OL3QT
NIST Chemistry Reference
p-«alpha»-Cumylphenol(599-64-4)
EPA Substance Registry System
p-Cumylphenol (599-64-4)
UNSPSC Code
12352100 · 12352100
NACRES
22 · NA.22
Symbol(GHS)
7 · GHS07
Signal word
Warning
Hazard statements
315 · H315-H319-H335
Precautionary statements
261 · P261-P264-P271-P280-P302+P352-P305+P351+P338
target organs
Respiratory system
PPE
95 · dust mask type N95 (US), Eyeshields, Gloves
Hazard Codes
Xi
Risk Statements
36 · 36/37/38
Safety Statements
24 · 24/25-37/39-26
RIDADR
3077 · 3077
WGK Germany
2 · 2
RTECS
1942450 · SL1942450
TSCA
TSCA listed
HazardClass
9 · 9
PackingGroup
III
HS Code
29071990 · 29071990
Storage Class
11 · 11 - Combustible Solids
Hazard Classifications
2 Skin · Eye Irrit. 2Skin Irrit. 2STOT SE 3
Hazardous Substances Data
599 · 599-64-4(Hazardous Substances Data)
REACH Registrations
Active

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal and plant life; and conformance with environmental and public health regulations.

Toxicology

Environmental Fate · 3 items

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 2.9X10+4(SRC), determined from a structure estimation method(2), indicates that phenol, 4-(1-methyl-1-phenethyl)- is expected to be immobile in soil(SRC). The estimated pKa of phenol, 4-(1-methyl-1-phenethyl)- is 10.0(3), indicating that this compound will exist partially in anion form in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). Volatilization of phenol, 4-(1-methyl-1-phenethyl)- from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 8.8X10-8 atm-cu m/mole(SRC), using a fragment constant estimation method(2). Phenol, 4-(1-methyl-1-phenethyl)- is not expected to volatilize from dry soil surfaces(SRC) based upon an extrapolated vapor pressure of 2.5X10-5 mm Hg at 25 °C(5). A 0% of theoretical BOD using activated sludge in the Japanese MITI test(6) suggests that biodegradation is not an important environmental fate process in soil(SRC).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 2.9X10+5(SRC), determined from a structure estimation method(2), indicates that phenol, 4-(1-methyl-1-phenethyl)- is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 8.8X10-8 atm-cu m/mole(SRC), developed using a fragment constant estimation method(2). According to a classification scheme(4), an estimated BCF of 240(SRC), from an estimated log Kow of 4.12(2) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is high(SRC). However, phenol, 4-(1-methyl-1-phenethyl)- is reported to have low bioconcentration based on test results using catfish(5). A 0% of theoretical BOD using activated sludge in the Japanese MITI test(6)suggests that biodegradation is not an important environmental fate process in water(SRC). Phenol, 4-(1-methyl-1-phenethyl)- is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(3). Phenols can undergo sensitized photo-oxidation in surface waters exposed to sunlight via reaction with hydroxyl and peroxy radicals with half-lives on the order of days to weeks at the water surface(7); therefore, photo-oxidation may have some importance as a fate process for phenol, 4-(1-methyl-1-phenethyl)- in natural water(SRC).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), phenol, 4-(1-methyl-1-phenethyl)-, which has an extrapolated vapor pressure of 2.5X10-5 mm Hg at 25 °C(2), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase phenol, 4-(1-methyl-1-phenethyl)- is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 9 hours(SRC), calculated from its rate constant of 4.5X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Particulate-phase phenol, 4-(1-methyl-1-phenethyl)- may be removed from the air by wet and dry deposition(SRC).

Effluent ConcentrationsA phenol, 4-(1-methyl-1-phenethyl)- concentration of <0.01 to 0.49 ug/L was detected in the manifold exhaust gases from a polycarbonate processing extruder inside a polycarbonate processing facility(1).
Soil Adsorption/Mobility · 1 item

Using a structure estimation method based on molecular connectivity indices(1), the Koc of phenol, 4-(1-methyl-1-phenethyl)- can be estimated to be 2.9X10+4(SRC). According to a classification scheme(2), this estimated Koc value suggests that phenol, 4-(1-methyl-1-phenethyl)- is expected to be immobile in soil. The estimated pKa of phenol, 4-(1-methyl-1-phenethyl)- is 10.0(3), indicating that this compound will exist partially in anion form in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4).

Human Toxicity Excerpts · 1 item

/ENDOCRINE MODULATION/ A receptor-binding assay and X-ray crystal structure analysis demonstrated that the endocrine disruptor bisphenol A (BPA) strongly binds to human estrogen-related receptor gamma (ERRgamma). BPA is well anchored to the ligand-binding pocket, forming hydrogen bonds with its two phenol-hydroxyl groups. In this study, /the researchers/ found that 4-alpha-cumylphenol lacking one of its phenol-hydroxyl groups also binds to ERRgamma very strongly. The 2.0 A crystal structure of the 4-alpha-cumylphenol/ERRgamma complex clearly revealed that ERRgamma's Leu345-beta-isopropyl plays a role in the tight binding of 4-alpha-cumylphenol and BPA, rotating in a back-and-forth induced-fit manner. PMID:18582436

Artificial Pollution Sources · 1 item

Phenol, 4-(1-methyl-1-phenethyl)-'s production and use as an intermediate for resins, insecticides and lubricants(1) and its major use as a chain terminator for polycarbonates(2) may result in its release to the environment through various waste streams(SRC). Another application involves its reaction with ethylene oxide to form a specialty surfactant(2); it has been reported to be a detergent metabolite(3).

Environmental BiodegradationAEROBIC: Phenol, 4-(1-methyl-1-phenethyl)-, present at 100 mg/L, reached 0% of its theoretical BOD in 4 weeks using an activated sludge inoculum at 30 mg/L in the Japanese MITI test(1).
Environmental Bioconcentration · 1 item

An estimated BCF of 240 was calculated in fish for phenol, 4-(1-methyl-1-phenethyl)-(SRC), using an estimated log Kow of 4.12(1) and a regression-derived equation(1). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is high(SRC). However, phenol, 4-(1-methyl-1-phenethyl)- is reported to have low bioconcentration based on test results using catfish(3).

Volatilization from Water/Soil · 1 item

The Henry's Law constant for phenol, 4-(1-methyl-1-phenethyl)- is estimated as 8.8X10-8 atm-cu m/mole(SRC) using a fragment constant estimation method(1). This Henry's Law constant indicates that phenol, 4-(1-methyl-1-phenethyl)- is expected to be essentially non-volatile from water surfaces(2). Phenol, 4-(1-methyl-1-phenethyl)-'s Henry's Law constant indicates that volatilization from moist soil surfaces is not expected to occur(SRC). Phenol, 4-(1-methyl-1-phenethyl)- is not expected to volatilize from dry soil surfaces(SRC) based upon an extrapolated vapor pressure of 2.5X10-5 mm Hg at 25 °C(3).

Non-Human Toxicity Excerpts · 3 items

/LABORATORY ANIMALS: Subchronic or Prechronic Exposure/ Five groups of male and female Sprague-Dawley rats were given oral doses of phenol, 4-(1-methyl-1-phenylethyl)-. The test material was prepared as a 25% w/v formulation in corn oil. Four dose levels were evaluated: 5.0, 2.5, 1.25 and 0.625 g/kg. Animals were observed for 14 days. Clinical signs: Brownish red and saliva like stains on muzzle, fecal stains, piloerection, unkempt fur, moderate and/or slight depression, extensive yellow brown stains on anal and stomach area, red stains around eyes and hunched posture were noted in the two highest dose levels. Red stains on muzzle, piloerection, slight depression, fecal and urine stains, brown yellow stains on urogenital area, rapid breathing and unkempt fur were seen in animals dosed at 1.25 or 0.625 g/kg. Number of deaths at each dose level: At the dose level of 5.0 g/kg four deaths (100%), were noted between days one and two of the observation period. At the dose level of 2.5 g/kg four deaths (100%), were noted between days one and five of the observation period. At the dose level of 1.25 g/kg no deaths (0%), were noted during the observation period. At the dose level of 0.625 g/kg no deaths (0%), were noted during the observation period.

/ENDOCRINE MODULATION/ The estrogenic activities of 13 Bisphenol-A (BPA)-related chemicals for development of new polymers by three in vitro bioassay have been examined in the presence and absence of a post-mitochondrial metabolizing system (S9 mix). BPA, Bisphenol-B (BPB), Bisphenol-F (BPF), Bisphenol-S (BPS), 4,4-ethylidenebisphenol (BP1), 4,4-dihydroxybenzophenone (BP2), 2,2-bis (4-hydroxyphenyl)-hexafluoropropane (BP3), 4,4-(1,4-phenylenediisopropylidene) bisphenol (BP4), 4,4-cyclohexylidenebisphenol (BP5), 4,4-dihydroxydiphenyl ether (BP6), 4-hydroxydiphenylmethane (BP7), 4-cumylphenol (BP8) and 4,4-dihydroxydiphenyl sulfide (BP9) were each diluted with dimethyl sulfoxide to final concentrations ranging from 1x10-7 to 1x10-3 M in both the yeast two-hybrid system and in a fluorescence polarization system. Dilutions of 1x10-9 to 1x10-4 M were assayed in the E-screen, respectively. Except for BPS and BP4, the chemicals tested showed estrogenic activity in the absence of cut S9 mix preparation and the activity was enhanced with S9 mix. BPS, which was initially negative, was active with S9 mix in the yeast two-hybrid system. BP2 was weakly estrogenic with or without S9 mix. Chemicals other than BP2 were positive in the competition binding assay. All chemicals tested showed estrogenic activity in the E-screen, the concentration level of which was1x 10+4 times lower than those of the other two assays.

/GENOTOXICITY/ The mutagenicity potential of p-(alpha, alpha-dimethylbenzyl)phenol was evaluated in vitro in S. typhimurium (TA 100, TA1535, TA98, TA 1538 and TA1537) in the presence and absence of metabolic activation up to 500 ug/plate of test substance. No increases in mutation frequency were reported at any concentration tested with or without metabolic activation. Cytotoxicity was observed at concentrations greater than ug/plate with metabolic activation and greater than 50 ug/plate without metabolic activation.

Environmental Abiotic Degradation · 1 item

The rate constant for the vapor-phase reaction of phenol, 4-(1-methyl-1-phenethyl)- with photochemically-produced hydroxyl radicals has been estimated as 4.5X10-11 cu cm/molecule-sec at 25 °C(SRC) using a structure estimation method(1). This corresponds to an atmospheric half-life of about 9 hours at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(1). Phenol, 4-(1-methyl-1-phenethyl)- is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(2). Phenols can undergo sensitized photo-oxidation in surface waters exposed to sunlight via reaction with hydroxyl and peroxy (RO2) radicals with half-lives on the order of days to weeks at the water surface(3); therefore, photo-oxidation may have some importance as a fate process for phenol, 4-(1-methyl-1-phenethyl)- in natural water(SRC).

Probable Routes of Human Exposure · 2 items

According to the 2006 TSCA Inventory Update Reporting data, the number of persons reasonably likely to be exposed in the industrial manufacturing, processing, and use of phenol, 4-(1-methyl-1-phenethyl)- is 1000 or greater; the data may be greatly underestimated(1).

Occupational exposure to phenol, 4-(1-methyl-1-phenethyl)- may occur through inhalation and dermal contact with this compound at workplaces where phenol, 4-(1-methyl-1-phenethyl)- is produced or used. Since phenol, 4-(1-methyl-1-phenethyl)- has been identified as a detergent metabolite(1), the general population may be exposed via dermal contact with wastewaters or surface waters containing phenol, 4-(1-methyl-1-phenethyl)-(SRC).

Environmental Water Concentrations · 1 item

SURFACE WATER: Phenol, 4-(1-methyl-1-phenethyl)- was not detected (reporting limit of 1 ug/L) in 76 samples water samples collected upstream and downstream from selected towns and cities in Iowa in 2001(1). Phenol, 4-(1-methyl-1-phenethyl)- concentrations of 0.016 to 0.053 were quantified in three water samples collected from the Rhine River delta, The Netherlands in 1989(2).

Safety data

PPE
dust mask type N95 (US), Eyeshields, Gloves
wgk
2
tsca
TSCA listed
rtecs
SL1942450
ridadr
3077
hs_code
29071990
risk_code
36/37/38
Signal word
Warning
Symbol(GHS)
GHS07
hazard_code
Xi
safety_code
24/25-37/39-26
hazard_class
9
Storage Class
11 - Combustible Solids
packing_group
III
target organs
Respiratory system
Hazard statements
H315-H319-H335
REACH Registrations
Active
Hazard Classifications
Eye Irrit. 2Skin Irrit. 2STOT SE 3
Precautionary statements
P261-P264-P271-P280-P302+P352-P305+P351+P338
Hazardous Substances Data
599-64-4(Hazardous Substances Data)
Applications · 3 items

UsesIntermediate for resins, insecticides, lubricants.

UsesSurfactants, Phenolic Resins, Polycarbonate Chain Terminator

Uses4-Cumylphenol is a useful reagent for preparing and characterizing aromatic polyphosphonates as high refractive index polymers (1).

Upstream & downstream products

Upstream raw materials

1-PHENYL-1,3,3-TRIMETHYLINDAN2,4-Bis(alpha,alpha-dimethylbenzyl)phenol2,4-Diphenyl-4-methyl-1-pentenePhenol2-Phenyl-1-propene

Downstream products

2,3-Dimethyl-2,3-diphenylbutane2-[4-(1-METHYL-1-PHENYLETHYL)PHENOXY]ACETOHYDRAZIDE2,6-bis(tert-butyl)-4-(1-methyl-1-phenylethyl)phenol

Additional notes

DefinitionChEBI: P-Cumylphenol is a diarylmethane.