StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Verbindung

Mullite

HCID 12880061
Neue Reaktion
Drucken

Daten werden ergänzt – lade die Seite später neu, um den aktuellen Stand zu sehen

GrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
TeilstruktursucheÄhnliche Strukturen suchen

Grundinformationen

CAS
1302-93-8
Standard-SMILES
O=[Si]=O.O=[Si]=O.[O]=[Al][O][Al]=[O].[O]=[Al][O][Al]=[O].[O]=[Al][O][Al]=[O]
InChIKey
KZHJGOXRZJKJNY-UHFFFAOYSA-N
Summenformel
Al6O13Si2
Durchschnittliche Molmasse
426,05 g/mol
Monoisotopische Masse
425,776974

Überblick

Mullite is a mineral with formula of Al4+2xSi2-2xO10-x (x ≈ 0.4). The IMA symbol is Mul.

Namen und Bezeichner

Bevorzugter Name
Mullite
IUPAC
bis(dioxosilane);oxo(oxoalumanyloxy)alumane
Englischer Name
Refractories, fibers, aluminosilicate
Summenformel
Al6O13Si2
Molmasse
426.052428

Namen und Synonyme

MulliteMullite-alphaMullite (Al6O5(SiO4)2)PorcelainiteDYNAMULLITEINECS 215-113-23M Interam 1550HTMP 40-02EC 215-113-2MullitealphaRefChem:160018DTXSID3049675
Weitere Namen anzeigen
ALUMINOSILICATE (VITREOUS)
DTXCID801474020MP 4002215-113-2913-504-91302-93-837287-16-4Refractories, fibers, aluminosilicatedioxosilane;oxo(oxoalumanyloxy)alumane

Datenbank-Bezeichner

CAS
1302-93-8、142844-00-6
PubChem CID
12880061
EC Number
215-113-2、604-314-4、913-504-9

Eigenschaften

Berechnete StruktureigenschaftenWird ergänzt

Polarare Oberfläche (TPSA)
198 Ų
H-Brücken-Donoren
0
H-Brücken-Akzeptoren
13
Frei drehbare Bindungen
0
Schwere Atome
21
Formalladung
0
Komplexität
52,4

Experimentelle und physikochemische Eigenschaften

Chemical Classes · 2 Einträge

Mineral Dusts -> Other Mineral Dusts

Carcinogens

PesticidesPesticide -> EPA IRIS
Physical Description · 3 Einträge

Other Solid

Large Crystals; CBI; Other Solid

White odorless powder; Insoluble in water; [Alfa Aesar MSDS]

Physikochemische Eigenschaften

Schmelzpunkt
1650 °C · >1650°C
Dichte
2.6 · 2.6-2.7 g/cm3
storage temp.
5 °C · Store at +5°C to +30°C.
Aggregatzustand
fibers (may contain particles)
InChI
1S/6Al.2O2Si.9O/c;;;;;;2*1-3-2;;;;;;;;;
InChIKey
KZHJGOXRZJKJNY-UHFFFAOYSA-N
SMILES
[Si](=O)=O.[Si](=O)=O.[Al]65O[Al](O6)O5.[Al]43O[Al](O4)O3.[Al]21O[Al](O2)O1

Sicherheit und Regulatorisches

Sicherheitsangaben dienen nur zur Orientierung und ersetzen weder das Sicherheitsdatenblatt (SDB) des Lieferanten noch geltende Vorschriften oder eine fachliche Bewertung.

GHS-Klassifizierung

GHS Classification · 6 Einträge

This chemical does not meet GHS hazard criteria for 90.5% (341 of 377) of all reports.

Not Classified

Aggregated GHS information provided per 377 reports by companies from 4 notifications to the ECHA C&L Inventory.

Danger

H350 (46.7%): May cause cancer [Danger Carcinogenicity]

P203, P280, P318, P405, and P501 (click each P-code to see the statement)

Gefahrenhinweise

Regulatory Information · 6 Einträge

Refractories, fibers, aluminosilicate is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Refractories, fibers, aluminosilicate are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

Mullite (Al6O5(SiO4)2) is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Mullite (Al6O5(SiO4)2) are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: Mullite (EC: 215-113-2)

REACH registered substance: Refractories, fibers, aluminosilicate (EC: 604-314-4)

Mullite (Al6O5(SiO4)2): Does not have an individual approval but may be used as a component in a product covered by a group standard. It is not approved for use as a chemical in its own right.

Refractories, fibers, aluminosilicate: Does not have an individual approval but may be used under an appropriate group standard

Hazards Summary · 1 Eintrag

A 13-week inhalation study of rats produced dose-dependent nasal irritation and mild respiratory tract inflammation (considered of low toxicity, with effects similar to those produced by titanium dioxide and amorphous silica); [EPA - TSCATS] Contains 0-5% acrylate copolymer; May cause mechanical skin and eye irritation; Prolonged or repeated inhalation exposure may cause upper respiratory irritation and pneumoconiosis; [3M MSDS]

Chemie und Industrie

Verwendung und Herstellung

UsesUsed in automotive applications; [3M MSDS]
U.S. Production · 2 Einträge

2023: 127,766 lb

2023: 10,000,000,000 - <50,000,000,000 lb

Consumer UsesOther
Industry Uses · 2 Einträge

Absorbent

Other

Household ProductsInformation on 2 consumer products that contain Refractory ceramic fibers in the following categories is provided:
General Manufacturing Information · 3 Einträge

All Other Basic Inorganic Chemical Manufacturing

Miscellaneous Manufacturing

Mullite (Al6O5(SiO4)2): ACTIVE

Anwendungen · 2 Einträge

BeschreibungAluminosilicate fibers (commonly called refractory ceramic fibers (RCFs) in the United States) are amorphous fibers belonging to a class of materials termed synthetic vitreous fibers (SVFs), also termed man-made mineral fibers or manmade vitreous fibers. This class of materials also includes glass wool, rock (stone) wool, slag wool, mineral wool, and specialpurpose glass fibers. Fibers can be classified in various ways, such as natural versus synthetic, organic versus inorganic, and crystalline versus amorphous. Several fiber taxonomies have been proposed.Aluminosilicate wools (ASWs) were first invented in the early 1940s and commercialized in the 1950s in the United States and somewhat later in other countries. Substantial energy price increases beginning in the 1970s increased the economic benefits of energy conservation and the market for these fibers.ASWs are SVFs produced by melting (at ~1925°C) alumina, silica, and other inorganic oxides, and then blowing or spinning these melts into fibers. These fibers can also be produced by melting blends of calcined kaolin, alumina, and silica. The bulk fibers produced by this process can be used directly for some applications, but are more commonly converted into other physical forms, including blanket, modules (folded blanket capable of being installed rapidly in industrial furnaces), paper, felt, board, vacuum formed parts, textiles, and putties or pastes. Conversion to various physical forms takes place at locations where aluminosilicate fibers are produced, facilities operated by converters (producers of intermediate goods) or end users. Primary manufacturing facilities for aluminosilicate fibers are located in North and South America, Europe, and Asia. Conversion facilities and end users are distributed throughout the industrialized world.

Zugehörige Reaktionen

0
Reaktionsaufzeichnung erstellen
Noch keine zugehörigen Reaktionen

Notizen zur Verbindung

Auf dieser SeiteGrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
EPA chemische Informationen
Refractory ceramic fibers (142844-00-6)
Hazard Classes and Categories · 6 Einträge

Not Classified

Carc. 1B (46.7%)

STOT RE 2 (100%)

Skin corrosion/irritation - Category 2

Skin corrosion/irritation - Category 2

Carcinogens

Sicherheit und Schutzausrüstung

Threshold Limit Values (TLV)0.2 f/cc [1999]
Permissible Exposure Limit (PEL)15 mg/m³ or 50 mppcf (total dust), 5 mg/m³ or 15 mppcf (respirable fraction)
Recommended Exposure Limit (REL)0.5 f/cm³

Toxikologische Informationen

EPA IRIS InformationRefractory ceramic fibers

Sicherheitsdaten

wgk
3
hs_code
6806 10 00
risk_code
49
hazard_code
T
safety_code
53-45
Speicherklasse
6.1D - Non-combustible, acute toxic Cat.3toxic hazardous materials or hazardous materials causing chronic effects
Hazard Classifications
Carc. 1B Inhalation

VerwendenASWs have several desirable properties for use as hightemperature insulating materials, including low thermal conductivity, low heat storage (low volumetric heat capacity), thermal shock resistance, lightweight, good corrosion resistance, and ease of installation. Depending upon the fiber composition, the maximum end-use temperature for ASWs can be as high as 1430°C (2600°F). Because of this capability, these fibers are also included in the class of high-temperature insulating wools (HTIWs). Benefits of the use of ASW insulation include reduced energy costs and reduced greenhouse gas emissions. The energy savings can be substantial when compared to conventional high-temperature insulation such as insulating firebrick. Applications and markets for ASWs are principally industrial and vary by product form and country including furnace linings and components in the cement, ceramic, chemical, fertilizer, forging, foundry, glass, heat treating, nonferrous metals, petrochemical, power generation (cogeneration), and steel industries. ASWs are used for passive fire protection applications where thin, lightweight materials are needed to prevent flame penetration. ASWs are also used to a minor degree in emission control applications such as heat shield insulation, catalytic converter support mat, and filtration media for air bag inflators. Though sometimes referred to in the literature as a substitute for asbestos, aluminosilicate fibers are not typically used in asbestos applications. Aluminosilicate fibers are priced substantially higher than various types of asbestos and have maximum end-use temperatures substantially greater than those for asbestos (which vary depending upon the product but are typically°850°C).

Vor- und nachgelagerte Produkte

Vorgelagerte Rohstoffe

Aluminum oxideFumed SilicaKAOLIN