HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

CID 6352

HCID 178801101
New reaction
Print

Completing data — refresh the page later to see the latest

Basic informationNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
75-20-7
Standard SMILES
[C-]#[C-].[Ca+2]
InChIKey
UIXRSLJINYRGFQ-UHFFFAOYSA-N
Molecular formula
C2Ca
Average molar mass
64.1 g/mol

Names & identifiers

Preferred name
CID 6352
IUPAC
calcium acetylide
English name
Calcium carbide
Molecular formula
C2Ca
Molecular weight
64.1

Names & synonyms

carbideCALCIUM ACETYLIDEAcetylenogenELECTROLITECalciumcarbidcarburocalcicoethyne,calciuMcarburo calcicAcetylenestonesCALCIUM CARBIDE

Database identifiers

CAS
75-20-7

Properties

Computed structural propertiesFilling in

Topological polar surface area
0 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
2
Rotatable bonds
0
Heavy atoms
3
Formal charge
0
Complexity
8

Physicochemical properties

Melting point
447 °C · 447°C
Boiling point
2300 °C · 2300°C
Density
2.22 g/mL · 2.22 g/mL at 25 °C(lit.)
storage temp.
water-free area
solubility
2 O · reacts with H2O
form
pieces
color
Gray-black
Specific Gravity
2.22 · 2.22
Water Solubility
hydrolyses
Specific Heat Capacity
0.98 J/ · Cp(crystal): 0.98 J/(g·K), at 25℃
Sensitive
Moisture Sensitive
Merck
14 · 14,1656
BRN
3909011 · 3909011
Exposure limits
2 mg/m3OSHA: · ACGIH: TWA 2 mg/m3OSHA: TWA 5 mg/m3NIOSH: IDLH 25 mg/m3; TWA 2 mg/m3
Dielectric constant
5.8 · 5.8 - 7.0(0.0℃)
Stability
Stability Reacts violently with water liberating highly flammable gas (acetylene). Do not use water if this material is involved in a fire. Incompatible with moisture, water, strong oxidizing agents, alcohols, hydrogen chloride, magnesium.

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

Safety data

F
10-21
PPE
Eyeshields, Gloves, type P3 (EN 143) respirator cartridges
wgk
1
tsca
TSCA listed
ridadr
UN 1402 4.3/PG I/II (CALCIUM CARBIDE)
hs_code
28491000
risk_code
15-41-37/38
Signal word
Danger
Symbol(GHS)
GHS02
hazard_code
F
safety_code
8-43-43A-39-26
hazard_class
4.3
Storage Class
4.3 - Hazardous materials which set free flammable gases upon contact with water
packing_group
II
target organs
Respiratory system
Hazard statements
H260
Excepted Quantities
Not Permitted as Excepted Quantity
REACH Registrations
Active
Hazard Classifications
Eye Dam. 1Skin Irrit. 2STOT SE 3Water-react 1
Precautionary statements
P223-P231+P232-P280-P370+P378-P402+P404-P501
Hazardous Substances Data
75-20-7(Hazardous Substances Data)

Chemistry & industry

Applications · 7 items

DescriptionCalcium carbide (molecule formula: CaC2), is a kind of important chemical raw materials produced from the chemical processing of limestone. In 1892, H. Maysan (French) and H. Wilson (United state) simultaneously developed a calcium carbide production approach based on furnace Reduction. The United State had successfully achieved industrial production in 1895. The property of calcium carbide is related to its purity. Its industrial product is mostly the mixture of calcium carbide and calcium oxide, and also contains trace amounts of sulfur, phosphorus, nitrogen and other impurities. With the increasing content of impurities, it color exhibits gray, brown to black. The melting point and electrical conductivity both decrease with the decrease of the purity. The purity of its industrial product is usually 80% with m.p. being 1800~2000 °C. At room temperature, it does not react with air, but it can have oxidation reaction at above 350 ℃, and have reaction with nitrogen at 600~700 ℃ to generate calcium cyanamide. Calcium carbide, when coming across with water or steam, generates acetylene and release a large amount of heating. CaC2 + 2H2O─ → C2H2 + Ca (OH) 2 + 125185.32J, 1kg of pure calcium carbide can produce 366 L of acetylene 366l (15 ℃, 0.1MPa). Thereby, for its storage: calcium carbide should be strictly kept away from water. It is usually packed in a sealed iron container, and sometimes stored in a dry warehouse being filled with nitrogen if necessary.

Uses▼ ▲ Industry Applications Benefit Chemical manufacture Production of acetylene gas Raw materials,CaC2 + 2 H2O → C2H2 + Ca(OH)2 Production of calcium cyanamide Raw materials, CaC2 + N2 → CaCN2 + C Production of various acetylene derivatives Source of acetylene gas Production of calcium hydroxide Raw materials, CaC2 + 2 H2O → C2H2 + Ca(OH)2 Steel production The desulfurisation of iron (pig iron, cast iron and steel) Desulfurization agent As a fuel in steelmaking Extend the scrap ratio to liquid iron Ladle treatment facilities A powerful deoxidizer Mining, automobiles and street lighting Carbide lamps React with water to make acetylene gas, which can burn to glow Fruit Artificial ripening fruit Source of acetylene gas Signal flares Floating, self-igniting naval signal flares Used together with calcium phosphide Cylinder gas Metal fabrication and construction Source of acetylene gas Experiment teaching Teaching reagent Experiment reagent

DescriptionCalcium carbide,is a binary salt. It is a grayish-black hard solid that reacts with water to produce acetylene gas, a solid corrosive that is calcium hydroxide, and release heat. Acetylene gas is manufactured by reacting calcium carbide with water. Because acetylene is so unstable, it is not shipped in bulk quantities. Calcium carbide is shipped to acetylene-generating plants where it is reacted with water in a controlled reaction. After the reaction process, the acetylene gas is placed into specially designed containers with a honeycombed mesh inside for shipment and use. It is dissolved in acetone for stability. Calcium carbide has a specific gravity of 2.22, which is heavier than water. The four-digit UN identification number for calcium carbide is 1402. The NFPA 704 designation is health 3, flammability 3, and reactivity 2. The white section at the bottom of the diamond contains a W with a slash through it, indicating water reactivity. It is shipped in metal cans, drums, and specially designed covered bins on railcars and trucks. When shipped and stored, it should be kept in a cool, dry place. Primary uses are in the generation of acetylene gas for welding, vinyl acetate monomer, and as a reducing agent.

Related reactions

0 records
New reaction record
No related reactions yet

Compound notes

On this pageBasic informationNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
InChI
1S/C2.Ca/c1-2;/q-2;+2
InChIKey
UIXRSLJINYRGFQ-UHFFFAOYSA-N
SMILES
[Ca++].[C-]#[C-]
FDA UNII
846 WNV4A5F · 846WNV4A5F
EPA Substance Registry System
Calcium carbide (75-20-7)
UNSPSC Code
12352300 · 12352300
NACRES
23 · NA.23
Symbol(GHS)
2 · GHS02
Signal word
Danger
Hazard statements
260 · H260
Precautionary statements
223 · P223-P231+P232-P280-P370+P378-P402+P404-P501
target organs
Respiratory system
PPE
3 · Eyeshields, Gloves, type P3 (EN 143) respirator cartridges
Hazard Codes
F
Risk Statements
15 · 15-41-37/38
Safety Statements
8 · 8-43-43A-39-26
RIDADR
1402 · UN 1402 4.3/PG I/II (CALCIUM CARBIDE)
WGK Germany
1 · 1
F
10 · 10-21
TSCA
TSCA listed
HazardClass
4.3 · 4.3
PackingGroup
II
HS Code
28491000 · 28491000
Storage Class
4.3 · 4.3 - Hazardous materials which set free flammable gases upon contact with water
Hazard Classifications
1 Skin · Eye Dam. 1Skin Irrit. 2STOT SE 3Water-react 1
Hazardous Substances Data
75 · 75-20-7(Hazardous Substances Data)
REACH Registrations
Active
Excepted Quantities
Not Permitted as Excepted Quantity

UsesCalcium carbide (CaC2) has a garlic-like odor and reacts with water to form acetylene gas plus calcium hydroxide and heat. In the past, it was used in miners’ lamps to continuously produce a small acetylene flame to provide some illumination in coal mines.

UsesCalcium carbide is used as a desulfurizer, dehydrant of steel, fuel in steel making, powerful deoxidizer and as a source of acetylene gas. It is used as a starting material for the preparation of calcium cyanamide, ethylene, chloroprene rubber, acetic acid, dicyandiamide and cyanide acetate. It is used in carbide lamps, toy cannons such as the big-bang cannon and bamboo cannon. It is associated with calcium phosphide and used in floating, self-igniting naval signal flares. Further, it is involved in the reduction of copper sulfide to metallic copper.

UsesCalcium carbide is the most relevant carbide industrially because of its important role as the basis of acetylene industry. In locations where there is shortage of petroleum, Calcium Carbide is used as the starting material for the production of acetylene (1 kg of carbide yields ~300 liters acetylene), which, in turn, can be used as a building block for a range of organic chemicals (e.g. vinyl acetate, acetaldehyde and acetic acid). In some locations, acetylene is also used to produce vinyl chloride, the raw material for the production of PVC. A less important use of Calcium Carbide is related to the ferilizers industry. It reacts with nitrogen to form calcium cyanamide, which is the starting material for the production of cyanamide (CH2N2). Cyanamide is a common agricultural product used to stimulate early foliation. Calcium Carbide can also be employed as desulfurizing agent for producing low-sulfur carbon steel. Also, it is used as a reducing agent to produce metals from their salts, e.g., for direct reduction of copper sulfide to metallic copper.

General DescriptionGrayish-black irregular lump solid. Used to make acetylene and in steel manufacture.

Preparation methods · 1 item

PreparationCalcium carbide (CaC2) is manufactured by heating a lime and carbon mixture to 2000 to 2100°C (3632 to 3812°F) in an electric arc furnace. At those temperatures, the lime is reduced by carbon to calcium carbide and carbon monoxide (CO), according to the following reaction: CaO + 3C → CaC2 + CO Lime for the reaction is usually made by calcining limestone in a kiln at the plant site. The sources of carbon for the reaction are petroleum coke, metallurgical coke, and anthracite coal. Because impurities in the furnace charge remain in the calcium carbide product, the lime should contain no more than 0.5 percent each of magnesium oxide, aluminum oxide, and iron oxide, and 0.004 percent phosphorus. Also, the coke charge should be low in ash and sulfur. Analyses indicate that 0.2 to 1.0 percent ash and 5 to 6 percent sulfur are typical in petroleum coke. About 991 kilograms (kg) (2,185 pounds [lb]) of lime, 683 kg (1,506 lb) of coke, and 17 to 20 kg (37 to 44 lb) of electrode paste are required to produce 1 megagram (Mg) (2,205 lb) of calcium carbide.

Upstream & downstream products

Upstream raw materials

Carbon monoxideDelayed petroleum cokeCalcium carbonateCalcium carbonateCalcium oxideCarbon BlackElectrode pasteMETALLURGICAL COKECoke (coal)

Downstream products

Calcium cyanamide1,1,2,2-TetrabromoethanePolychloroprenecis-2-Butene-1,4-diolEthyl vinyl etherSodium hypochlorite1,3-ButadieneCarbon BlackVINYL CHLORIDETetrapotassium hexacyanoferrate1,1,2,2-Tetrabromoethane1,1-DifluoroethaneSulfadiazinePropargyl alcoholTrichloroethylene2-Butyne-1,4-diolCement dustAcetylene2-Methyl-2-butanolPolyvinyl chlorideDichloroethane2-Butene-1,4-diol