Completing data — refresh the page later to see the latest
7990-91-27990-91-2Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.
DescriptionChlorine trifluoride (CIF3) is a toxic, corrosive, very reactive liquefied compressed gas packaged in cylinders as a liquid under its own vapor pressure of 1.55 kg/cm2 at 21°C (22 psia at 70°F). CIF3 is a very useful chemical in operations requiring a highenergy fluorinating agent or incendiary material, especially since it can be handled at room temperatures. Chlorine trifluoride is primarily of interest as a component in rocket fuels, in industrial cleaning and etching operations primarily in the semiconductor industry, nuclear reactor fuel processing and other industrial operations.
HistoryFluorine (F2) has been recognized as the most powerful oxidizing agent of all known elements. Due to difficulties handling F2 in its most reactive state (liquid), substitutes were evaluated in the late 1920s to find similarly reactive compounds with easier handling. Ruff and Krug successfully isolated Chlorine trifluoride in 1930 after experimental tests with chlorine monofluoride suggested the presence of a higher fluoride species.Liquid Chlorine trifluoride is considered more reactive than vapor-phase F2 reactions since more moles of fluorinating agent are present per unit area of reactant surfaces. Also, liquid Chlorine trifluoride may demonstrate even higher reactivity in certain circumstances than liquid F2 because the F2 liquid temperature is cryogenic, thus reducing its activity potential. German interest in Chlorine trifluoride during World War II prompted the first industrial bulk production capability for the material. The Germans produced CIF3 in tonnage quantities for military use in flamethrowers due the liquid’s extreme hypergolic nature with fuels (self-igniting) and as a general incendiary material. Following the war, interest in the use of CIF3 for organic synthesis work increased although the material was eventually considered to be too reactive for practical use and mostly abandoned for these applications.Synthesis reactions proved difficult to control and usually led to a wide variety of reaction by-products that were hazardous. Many fluorinating compounds were evaluated as potent oxidizers for liquid–fueled rockets in the late 1940s through the early 1950s to overcome the storage and handling disadvantages of liquid F2. Chlorine trifluoride was first tested in the U.S. in 1948 on a liquid propellant rocket motor using hydrazine as the fuel. Additional testing yielded favorable results. However, all rocket materials of construction (including metals and seals) that could contact CIF3 had to be scrupulously selected, cleaned, and passivated to prevent the components from burning during reaction.CIF3 was also recognized as an extremely hazardous propellant due to its reactivity, toxicity, and toxic by-products of fluorination.
UsesChlorine trifluoride is used as a fluorinating agent. It may be Used as a fluorinating agent, incendiary, igniter and propellant for rockets, in nuclear reactor fuel processing, pyrolysis inhibitor for fluoro carbon polymers. During Word War II, Chlorine trifluoride was used by Germany as an incendiary gas.
PreparationChlorine trifluoride was first reported by Ruff and Krug who prepared it by fluorination of chlorine, this also produced ClF and the mixture was separated by distillation. 3F2 + Cl2 → 2ClF3