52508-35-7CC1(C)OC[C@@H]2O[C@@]3(C(=O)[O-])OC(C)(C)O[C@H]3[C@@H]2O1.[Na+]DEWVPZYHFVYXMZ-QCILGFJPSA-M52508-35-7DTXSID2034540CHEMBL3561805Colorless crystals
White powder
Water solubility: 1.49X10+4 mg/L at 25 °C; vapor pressure: 1.81X10-5 mm Hg at 25 °C /Dikegulac acid/
In water, 5.90X10+5 mg/L at 25 °C
In methanol 390, ethanol 230, chloroform 63, acetone,dimethylformamide, cyclohexanone, hexane, dioxane <10 (all in g/kg, 25 °C)
Protect from freezing.
Stable in the dry state. In aqueous solution, stable in neutral and alkaline conditions, but unstable in acidic conditions. Decomposed when heated above 50 °C. Stable to light.
Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.
.alpha.-L-xylo-2-Hexulofuranosonic acid, 2,3:4,6-bis-O-(1-methylethylidene)-, sodium salt: Does not have an individual approval but may be used as a component in a product covered by a group standard. It is not approved for use as a chemical in its own right.
Moderate irritation but no corneal effects in study of rabbits; A mild skin irritant in rabbits; Not a skin sensitizer in guinea pigs; No deaths in oral, dermal, or inhalation lethal-dose studies; [Reference #1] May cause irritation; [Aldrich MSDS]
USEPA/Office of Pesticide Programs; Reregistration Eligibility Decision Document - Dikegulac Sodium, EPA 738-R-07-003 (March 2007). The RED summarizes the risk assessment conclusions and outlines any risk reduction measures necessary for the pesticide to continue to be registered in the U.S.[Available from, as of April 27, 2012: http://www.epa.gov/pesticides/reregistration/status.htm]
The Agency has completed its assessment of the occupational, residential, drinking water, and ecological risk associated with the use of pesticide products containing the active ingredient dikegulac sodium. The Agency has determined that dikegulac sodium-containing products are eligible for reregistration provided that label amendments are made as outlined in Chapter V. ... Based on its evaluation of dikegulac sodium, the Agency has determined that dikegulac sodium does not present risks to human health or the environment. However, in order to comply with the Worker Protection Standards, the Agency is requiring additional PPE /personal protective equipment/ for tree injection applications, as well as for early entry, and an increased REI /restricted entry interval/ for agricultural uses. Additionally, to mitigate potential ecological risks to semi-aquatic plants, the Agency is requiring the implementation of spray drift language on all end use labels with foliar applications. Should a registrant fail to implement any of the reregistration requirements identified in this document, or should the Agency identify any risks inconsistent with FIFRA at a later date, the Agency may take regulatory action.
... A growth regulator, dikegulac (2,3:4,6 di-o-isopropylidine-2-keto-L-gulonate) inhibits amino acid incorporation into proteins. Using Solanum nigrum suspension cultures, it was found that dikegulac rapidly inhibits amino acid uptake into cells, before inhibiting incorporation, with time points starting at a few minutes, and kinetics that are extrapolated back to time zero. With more rapid kinetics, this compound induces leakage of a preloaded dye. The rate of leakage was less with stationary cells in suspension, reiterating that they are more resistant to the effects of this compound. At the concentrations used, the first effect of dikegulac (or one very close to the first effect) is probably on the cell membrane.
Used as plant growth regulator for trees, plants, and shrubs; One formulated and one Ready-to-Use (RTU) product registered in the US (both contain 18.5% active ingredient); No technical products registered in the US; [Reference #1]
Farming (Pesticides) [Category: Industry]
For dikegulac sodium (USEPA/OPP Pesticide Code: 109601) ACTIVE products with label matches. /SRP: Registered for use in the U.S. but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./
Used in greenhouses, nurseries, and on landscape trees, ornamentals, and plants. Landscape use includes parks, school campuses, city streets, and similar recreational, institutional, or industrial areas.
Pinching agent on azaleas, many other ornamentals. Growth retardant for shrubs, hedges, and ground covers. Trunk injection for tree growth.
Herbicide
Atrinal Plant Growth Regulation (EPA registration number 2217-776), contains 18.5% active ingredient. There is also a Ready-to-Use (RTU) tree injection product, which also contains 18.5% active ingredient (EPA registration number 69117-7).
Liquid concentrate
Atrinal Plant Growth Regulator (PBI/Gordon Corp), Dikegulac sodium 18.5%.
As the federal pesticide law FIFRA directs, EPA is conducting a comprehensive review of older pesticides to consider their health and environmental effects and make decisions about their continued use. Under this pesticide reregistration program, EPA examines newer health and safety data for pesticide active ingredients initially registered before November 1, 1984, and determines whether the use of the pesticide does not pose unreasonable risk in accordance to newer saftey standards, such as those described in the Food Quality Protection Act of 1996. Pesticides for which EPA had not issued Registration Standards prior to the effective date of FIFRA '88 were divided into three lists based upon their potential for human exposure and other factors, with List B containing pesticides of greater concern than those on List C, and with List C containing pesticides of greater concern than those on List D. Dikegulac sodium is found on List C. Case No: 3061; Pesticide type: herbicide; Case Status: OPP is reviewing data from the pesticide's producers regarding its human health and/or environmental effects, or OPP is determining the pesticide's eligibility for reregistration and developing the RED document.; Active ingredient (AI): bis-O-(1-methylethylidene)-.alpha.-L-xylo-2-hexulofuranosonic acid, sodium salt; Data Call-in (DCI) Date(s): 07/02/93, 10/13/95; AI Status: The producers of the pesticide have made commitments to conduct the studies and pay the fees required for reregistration, and are meeting those commitments in a timely manner.
Fire Extinguishing Media: Water spray, dry chemical, CO2, foam.
Foam, CO2, dry chemical and/or water as appropriate for fire of surrounding materials. /Pinscher PGR/
Wear self-contained breathing apparatus. /Pinscher PGR/
Store in original closed container, in a cool, dry place. /Pinscher PGR/
Store in original container in a locked storage area. Keep from freezing. To prevent cross contamination, do not store near other pesticides, fertilizers, seeds, food, or feed. /Pinscher PGR/
Do not contaminate water when disposing of equipment washwaters or rinsate. /Pinscher PGR/
Do not touch spilled product. Contain and collect spilled material with inert absorbent; place in suitable container(s) for disposal. Cover and label the container(s). Wash area with water, if possible. /Pinscher PGR/
SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal and plant life; and conformance with environmental and public health regulations.
Pesticide disposal: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility. /Pinscher PGR/
Container disposal: Completely empty pack into application equipment, then dispose of empty pack in a sanitary landfill; or if allowed by State and local authorities, by burning; if burned, stay out of smoke. /Pinscher PGR/
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. Discard clothing or other absorbent materials that have been drenched or heavily contaminated with this product's concentrate. Do not reuse them. /Pinscher PGR/
Users should wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. /Pinscher PGR/
Users should immediately remove clothing/ PPE if pesticide gets inside, then thoroughly wash and put on clean clothing. Users should immediately remove PPE after handling this product. Wash the outside of gloves before removing. As soon as possible, thoroughly wash and change into clean clothing. /Pinscher PGR/
Do not apply directly to water, to areas where surface water is present or to intertidal areas below the mean high water mark. /Pinscher PGR/
Waterproof gloves
Mixers, loaders, applicators and other handlers must wear: Longsleeved shirt, long pants, shoes, socks and chemical-resistant gloves made of rubber or neoprene. When making direct injections to trees, applicators must wear protective eyewear. /Pinscher PGR/
LC50; Species: Anas platyrhynchos (Mallard Duck) diet >50000 ppm for 20 days
LC50; Species: Coturnix japonica (Japanese Quail) diet >50000 ppm for 21 days
LD50; Species: Apis mellifera (Honey Bee) worker; topical, general >81.0 ug/bee
EC50; Species: Daphnia magna (Water flea); Conditions: freshwater, static; Concentration: >10000000 ug/L for 48 hr; Effect: intoxication, immobilization
For more Ecotoxicity Values (Complete) data for Dikegulac sodium (8 total), please visit the HSDB record page.
TERRESTRIAL FATE: Dikegulac-sodium will dissociate to dikegulac acid and sodium ion in water(1). Based on a classification scheme(2), an estimated Koc value of 10(SRC), determined from a log Kow of 1.35(3) and a regression-derived equation(4), indicates that dikegulac acid is expected to have very high mobility in soil(SRC). The pKa of dikegulac acid is 2.71(5), indicating that this compound will exist almost in the anion form in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(6). Volatilization from moist soil is not expected because the compound exists as an anion and anions do not volatilize. Dikegulac acid is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 1.8X10-5 mm Hg at 25 °C(SRC), determined from a fragment constant method(7). It is expected that dikegulac-sodium will be fully mineralized to CO2 and water with no persistent degradates as it is a sugar derivative(1). A soil metabolism study indicates that the half-life in soil is 15 days(1) suggesting that biodegradation is an important environmental fate process in soil(SRC).
AQUATIC FATE: Dikegulac-sodium will dissociate to dikegulac acid and sodium ion in water(1). Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a log Kow of 1.35(3) and a regression-derived equation(4), indicates that dikegulac acid is not expected to adsorb to suspended solids and sediment(SRC). A pKa of 2.71(5) indicates dikegulac acid will exist almost entirely in the anion form at pH values of 5 to 9 and therefore volatilization from water surfaces is not expected to be an important fate process(SRC). According to a classification scheme(6),an estimated BCF of 3(SRC), from dikegulac acid's log Kow(3) and a regression-derived equation(4), suggests the potential for bioconcentration in aquatic organisms is low(SRC). It is expected that dikegulac-sodium will be fully mineralized to CO2 and water with no persistent degradates as it is a sugar derivative(1). A soil metabolism study indicates that the half-life in soil is 15 days(1) suggesting that biodegradation may be an important environmental fate process in water(SRC).
ATMOSPHERIC FATE: Dikegulac-sodium will dissociate to dikegulac acid and sodium ion in water(1). According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(2), dikegulac acid, which has an estimated vapor pressure of 1.8X10-5 mm Hg at 25 °C(SRC), determined from a fragment constant method(3), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase dikegulac acid is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 2.4 hrs(SRC), calculated from its rate constant of 5.3X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(4). Dikegulac-sodium is stable to light(5) and, therefore, is not expected to be susceptible to direct photolysis by sunlight(SRC).
Dikegulac-sodium will dissociate to dikegulac acid and sodium ion in water(1). The Koc of dikegulac acid is estimated as 10(SRC), using a log Kow of 1.35(2) and a regression-derived equation(3). According to a classification scheme(4), this estimated Koc value suggests that dikegulac acid is expected to have very high mobility in soil. The pKa of dikegulac acid is 2.71(5), indicating that this compound will exist almost entirely in the anion form in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(6).
AEROBIC: It is expected that dikegulac-sodium will be fully mineralized to CO2 and water with no persistent degradates as it is a sugar derivative; intermediate breakdown products include ascorbic acid. A soil metabolism study indicates that the half-life in soil is 15 days(1).
Dikegulac-sodium will dissociate to dikegulac acid and sodium ion in water(1). An estimated BCF of 3 was calculated in fish for dikegulac acid(SRC), using a log Kow of 1.35(2) and a regression-derived equation(3). According to a classification scheme(4), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).
Dikegulac-sodium will dissociate to dikegulac acid and sodium in water(1). The free acid is semi-volatile however the very low estimated Henry's Law constant of 1.90X10-16 atm-cu m/mol for the acid(SRC) derived using a fragment constant method(2), suggests that volatilization is not an important fate process from water or moist soil surfaces(1). Furthermore, a pKa of 2.71(3) indicates dikegulac acid will exist almost entirely in the anion form at pH values of 5 to 9 and therefore volatilization from water surfaces is not expected to be an important fate process.
/LABORATORY ANIMALS: Acute Exposure/ /In an/ acute dermal irritation study in rabbits, slight dermal irritation/slight erythema was apparent 72 hours after application.
/LABORATORY ANIMALS: Acute Exposure/ /In an/ acute eye irritation study in rabbits, no corneal effects were observed. Iridial changes subsided in all eyes by 7 days and conjunctival changes subsided by 10 days.
/LABORATORY ANIMALS: Acute Exposure/ /In an/ acute eye irritation study in rabbits, conjunctival redness was persistent for 48 and 72 hours/.
/LABORATORY ANIMALS: Subchronic or Prechronic Exposure/ /In a/ 90-day subchronic toxicity study, /dikegulac sodium was administered to/ 22 Fullinsdorf albino rats/sex/dose of 0, 200, 700, and 2,000 mg/kg/day for 13 weeks. Mortality, clinical signs, body weight, hematology, urinalysis, organ weights, gross and microscopic pathology were unaffected by treatment. The NOAEL is > or = 3000 mg/kg/day. The LOAEL was not established.
For more Non-Human Toxicity Excerpts (Complete) data for Dikegulac sodium (12 total), please visit the HSDB record page.
Dikegulac-sodium will dissociate to dikegulac acid and sodium ion in water(1). The rate constant for the vapor-phase reaction of dikegulac acid with photochemically-produced hydroxyl radicals has been estimated as 1.9X10-16 cu cm/molecule-sec at 25 °C(SRC) using a structure estimation method(2). This corresponds to an atmospheric half-life of about 2.4 hours at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(2). Dikegulac-sodium is hydrolyzed to sodium 2,3-O-isopropylidene 2-keto-L-gulonate, the acid being formed in acidic media. In aqueous solution, the salt is stable in neutral and alkaline conditions(3). Dikegulac-sodium is stable to light(3) and, therefore, is not expected to be susceptible to direct photolysis by sunlight(SRC).
Occupational exposure to dikegulac-sodium may occur through inhalation and dermal contact with this compound at workplaces where dikegulac-sodium is produced or used. Use data indicate that the general population may be exposed to dikegulac-sodium via dermal contact with this compound at public access venues where it has been applied to vegetation. (SRC)
Dikegulac-sodium's production may result in its release to the environment through various waste streams; its use as a plant growth regulator will result in its direct release to the environment. Dikegulac-sodium will dissociate to dikegulac acid and sodium ion in water. If released to air, an estimated vapor pressure of 1.8X10-5 mm Hg at 25 °C indicates dikegulac acid will exist in both the vapor and particulate phases in the atmosphere. Vapor-phase dikegulac acid will be degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals; the half-life for this reaction in air is estimated to be 2.4 hours. Particulate-phase dikegulac will be removed from the atmosphere by wet or dry deposition. Dikegulac-sodium is stable in light and, therefore, is not expected to be susceptible to direct photolysis by sunlight. If released to soil, dikegulac acid is expected to have very high mobility based upon an estimated Koc of 10. The pKa of dikegulac acid is 2.71, indicating that this compound will exist almost entirely in the anion form in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts. Volatilization from moist soil is not expected because the compound exists as an anion and anions do not volatilize. Dikegulac acid may not volatilize from dry soil surfaces based upon its estimated vapor pressure. It is expected that dikegulac-sodium will be fully mineralized to CO2 and water with no persistent degradates as it is a sugar derivative. A soil metabolism study indicates that the half-life in soil is 15 days suggesting that biodegradation is an important environmental fate process in soil and water. If released into water, dikegulac acid is not expected to adsorb to suspended solids and sediment based upon the estimated Koc. The pKa indicates dikegulac acid will exist almost entirely in the anion form at pH values of 5 to 9 and therefore volatilization from water surfaces is not expected to be an important fate process. An estimated BCF of 3 suggests the potential for bioconcentration in aquatic organisms is low. Dikegulac-sodium is hydrolyzed to sodium 2,3-O-isopropylidene 2-keto-L-gulonate, the acid being formed in acidic media. Occupational exposure to dikegulac-sodium may occur through inhalation and dermal contact with this compound at workplaces where dikegulac-sodium is produced or used. Use data indicate that the general population may be exposed to dikegulac-sodium via dermal contact with this compound at public access venues where it has been applied to vegetation. (SRC)
The Agency has completed its assessment of the occupational, residential, drinking water, and ecological risk associated with the use of pesticide products containing the active ingredient dikegulac sodium. The Agency has determined that dikegulac sodium-containing products are eligible for reregistration provided that label amendments are made as outlined in Chapter V. ... Based on its evaluation of dikegulac sodium, the Agency has determined that dikegulac sodium does not present risks to human health or the environment. However, in order to comply with the Worker Protection Standards, the Agency is requiring additional PPE /personal protective equipment/ for tree injection applications, as well as for early entry, and an increased REI /restricted entry interval/ for agricultural uses. Additionally, to mitigate potential ecological risks to semi-aquatic plants, the Agency is requiring the implementation of spray drift language on all end use labels with foliar applications. Should a registrant fail to implement any of the reregistration requirements identified in this document, or should the Agency identify any risks inconsistent with FIFRA at a later date, the Agency may take regulatory action.
As the federal pesticide law FIFRA directs, EPA is conducting a comprehensive review of older pesticides to consider their health and environmental effects and make decisions about their continued use. Under this pesticide reregistration program, EPA examines newer health and safety data for pesticide active ingredients initially registered before November 1, 1984, and determines whether the use of the pesticide does not pose unreasonable risk in accordance to newer saftey standards, such as those described in the Food Quality Protection Act of 1996. Pesticides for which EPA had not issued Registration Standards prior to the effective date of FIFRA '88 were divided into three lists based upon their potential for human exposure and other factors, with List B containing pesticides of greater concern than those on List C, and with List C containing pesticides of greater concern than those on List D. Dikegulac sodium is found on List C. Case No: 3061; Pesticide type: herbicide; Case Status: OPP is reviewing data from the pesticide's producers regarding its human health and/or environmental effects, or OPP is determining the pesticide's eligibility for reregistration and developing the RED document.; Active ingredient (AI): bis-O-(1-methylethylidene)-.alpha.-L-xylo-2-hexulofuranosonic acid, sodium salt; Data Call-in (DCI) Date(s): 07/02/93, 10/13/95; AI Status: The producers of the pesticide have made commitments to conduct the studies and pay the fees required for reregistration, and are meeting those commitments in a timely manner.
Atrinal Nursery & Greenhouse (PBI/Gordon Corp), Dikegulac sodium 18.5%.
Pinscher PGR (Arborsystems, Inc.), Dikegulac sodium 18.5%.