HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Beryllium Fluoride

HCID 24589
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
7787-49-7
Standard SMILES
[Be+2].[F-].[F-]
InChIKey
JZKFIPKXQBZXMW-UHFFFAOYSA-L
Molecular formula
BeF2
Average molar mass
47.009 g/mol
Monoisotopic mass
47.0089894

Overview

Beryllium fluoride is an odorless white solid. Denser than water. (USCG, 1999)

Names & identifiers

Preferred name
Beryllium Fluoride
IUPAC
beryllium difluoride
English name
Beryllium fluoride
Molecular formula
BeF2
Molecular weight
47.01

Names & synonyms

Beryllium fluoride (BeF2)FluoroberyllateberyllofluorideBeryllium fluoride(Be2F4)BeF2Beryllium fluoride(BeF2)difluoroberylliumBe2F4Beryllium Fluoratum499FU9DQ5CCHEBI:49499NSC84264
Show more names
Beryllium fluoride,97%berylliumfluoride[bef2]berylliumfluoride(bef2)Beryllium fluoride 99.5%Beryllium fluoride,98.5+%
NSC-84264RefChem:58732DTXCID401012151232-118-57787-49-7Beryllium difluorideBeryllium FluorideDTXSID50873983

Database identifiers

CAS
7787-49-7
PubChem CID
24589
ChEBI
CHEBI:49499
EC Number
232-118-5

Properties

Computed structural properties

Topological polar surface area
0 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
2
Rotatable bonds
0
Heavy atoms
3
Formal charge
0
Complexity
2.8

Experimental & physicochemical properties

Chemical Classes · 2 items

Metals -> Beryllium Compounds, Inorganic

Carcinogens

OdorOdorless
Density · 4 items

1.99 at 68 °F (USCG, 1999) - Denser than water; will sink

2.1 g/cu cm

2,0 g/cm³

2.1 @ 20°C

Color/Form · 4 items

Tetrahedral crystals or glass

Glassy hygroscopic mass (tetragonal system)

Amorphous, colorless, hexagonal crystals

White salt

Solubility · 3 items

Very soluble in water; slightly soluble in ethanol

Insoluble in anhydrous hydrogen fluoride; soluble in alcohol; more soluble in mixture of alcohol and ether

Solubility in water: very good

Boiling Point · 3 items

1283 °C

1175 °C

1283 °C @760 [mm Hg]

Melting Point · 3 items

True MP: 555 °C; becomes free-flowing at about 800 °C

555 °C

552 °C

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

Danger

H301 (100%): Toxic if swallowed [Danger Acute toxicity, oral]

P203, P260, P262, P264, P270, P271, P273, P280, P284, P301+P316, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P318, P319, P320, P321, P330, P361+P364, P363, P391, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 4 reports by companies from 1 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Danger

H301: Toxic if swallowed [Danger Acute toxicity, oral]

Hazard information

Regulatory Information · 2 items

Beryllium fluoride (BeF2) is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Beryllium fluoride (BeF2) are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT LabelPoison
Fire Hazards · 2 items

Special Hazards of Combustion Products: Toxic and irritating vapor of unburned material may form in fire. (USCG, 1999)

Not combustible. Gives off irritating or toxic fumes (or gases) in a fire.

Health Hazards · 1 item

Any dramatic weight loss should be considered as possible first indication of beryllium disease. Inhalation causes irritation of nose, throat, and lungs, severe pneumonitis, and/or pulmonary edema. Ingestion causes fatigue, weakness, loss of appetite. Contact with eyes causes severe irritation and burns. Contact with skin causes dermatitis and non-healing ulcers. (USCG, 1999)

Chemistry & industry

Pharmacology

Metabolism/Metabolites · 1 item

Beryllium is absorbed mainly through the lungs, where it enters the bloodstream and is transported throughout the body by binding to prealbumins and _-globulins. Beryllium accumulates in lung tissue and the skeleton. It is excreted mainly in the urine. (L25)

Absorption, Distribution and Excretion · 3 items

... Skeletal deposition of beryllium from the fluoride ... inhaled for 40 to 100 days by dogs, showed 17% ... retained in lung; 27% ... in liver; & 199% ... in the pulmonary lymph nodes.

Accumulation, distribution, and excretion of inhaled aerosol beryllium fluoride soln was related to the animal's age; 15 min after the exposure, 26.3-33.5% of the inhaled metal was found in the body of adult rats and 2-4 week old rats, and 12.5% in the body of 1 wk old rats. The organ and tissue content varied in animals of different age. Be clearance from the nasal passages, oral cavity, and trachea was slower and Be retention period in the stomach and small and large intestine was longer in 1 wk old rats than in adult rats.

The effects of type of cmpd administered, isotope carrier, and animal development were studied on beryllium absorption from the gastrointestinal (GI) tract of rats. Isotope (7)Be labeled salts, with and without isotope carrier (9)Be (0.25-6 mg/kg), were administered via the stomach. Beryllium accumulation in the liver was 4-12 fold and in the kidney 16-37 fold less than that in the skeleton. The accumulation of beryllium depended on the type of cmpd In 1, 2, and 4 wk old and adult rats, the major amt of beryllium was observed in the skeleton, liver, and kidney. Beryllium chloride administration (with and without the carrier) showed 8 fold higher organ accumulation than that in 1 mo old and adult rats, and beryllium fluoride accumulation was 1.5 fold higher in 1, 2, and 4 wk old rats than that in the adult animals. The isotope carrier had no effect on the level of accumulation in rats of different age groups. Beryllium oxide absorption was higher than that of the hydroxide and beryllium fluoride was absorbed approx 15-20 fold higher than the chloride, sulfate, and nitrate and 210-260 fold higher than the hydroxide. Easily sol cmpd of beryllium are less absorbed presumably due to their hydrolysis in the alk medium of the GI tract. Beryllium fluoride absorption was higher in young animals than that in the adult rats.

Related reactions

0 records
New reaction record
No related reactions yet

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Refractive Index
Index of refraction: below 1.33
Physical Description · 4 items

Beryllium fluoride is an odorless white solid. Denser than water. (USCG, 1999)

Large Crystals

Hygroscopic solid; Soluble in water; [Merck Index] Grey or colorless chunks; [MSDSonline]

COLOURLESS HYGROSCOPIC SOLID IN VARIOUS FORMS.

Other Experimental Properties · 5 items

Hygroscopic

Sublimes at 1036 °C under 1 mm Hg pressure in presence of beryllium

Specific gravity: 1.986 at 25 °C/4 °C

Heat of solution: -180 btu/lb = -98 cal/g = -4.1X10+5 joules/kg

For more Other Experimental Properties (Complete) data for BERYLLIUM FLUORIDE (6 total), please visit the HSDB record page.

Physicochemical properties

Melting point
545 °C · 545 °C
Boiling point
1169 °C · 1169°C (estimate)
Density
1 · 1,986 g/cm3
solubility
2 O; · very soluble in H2O; slightly soluble in ethanol
form
Powder
color
White
Water Solubility
2 O · very soluble H2O [MER06]; slightly soluble alcohol [HAW93]
Specific Heat Capacity
1.1 J/ · Cp(crystal): 1.1 J/(g·K), at 25℃
crystal system
Six sides
Space group
6222 · P6222
Lattice constant
a/nm
Symbol(GHS)
8 · GHS08,GHS09,GHS05,GHS06
Signal word
Danger
Hazard statements
350 · H350-H330-H311-H411-H301-H314-H372
Precautionary statements
280 · P280-P302+P352-P312-P322-P361-P363-P405-P501-P264-P270-P301+P310-P321-P330-P405-P501-P260-P264-P280-P301+P330+P331-P303+P361+P353-P363-P304+P340-P310-P321-P305+P351+P338-P405-P501-P260-P264-P270-P314-P501-P260-P271-P284-P304+P340-P310-P320-P403+P233-P405-P501
Hazard Codes
N-T+,Xi
Risk Statements
51 · 51/53-49-48/23-43-36/37/38-26-25
Safety Statements
61 · 61-53-45
RIDADR
1566 · UN1566
Hazard Note
Irritant
TSCA
TSCA listed
HazardClass
6.1 · 6.1
PackingGroup
II
Hazardous Substances Data
7787 · 7787-49-7(Hazardous Substances Data)
Toxicity
50 orl-rat: · LD50 orl-rat: 98 mg/kg XEURAQ UR-154,1951
Hazards Summary · 2 items

A skin, eye, and respiratory tract irritant; [HSDB] Skin contact may cause dermatitis and non-healing ulcers; [CAMEO] A severe skin, eye, and respiratory tract irritant; May cause beryllium sensitization after prolonged contact; Dust or fume inhalation may cause chemical pneumonitis; Repeated or prolonged exposure may cause chronic beryllium disease; [ICSC] See Beryllium for one additional linked occupational disease.

The major hazards encountered in the use and handling of beryllium fluoride stem from its toxicologic properties. Toxic by all routes (ingestion, inhalation, dermal contact), exposure to this odorless, colorless-to-white solid may occur from its use (in finely divided dust or solution form) as a chemical intermediate in the manufacture of beryllium metal, and as a glass former in glass manufacture. Effects from exposure may include contact burns of the skin and eyes, headache, fever, nausea, chest pain, shortness of breath, pulmonary edema, and possibly death from heart failure. The OSHA PEL and ACGIH TLV are set at a TWA of 2 ug/cu m. Engineering control of process equipment (eg, enclosure and local exhaust ventilation) should be used to prevent inhalation and skin contact with beryllium fluoride. In activities or situations where over-exposure is possible, workers should wear gloves, goggles, a self-contained breathing apparatus, and protective clothing. Work clothes should not be taken home. Should contact occur, immediately remove contaminated clothing and flush affected skin and eyes with running water for at least 15 minutes. While beryllium fluoride does not ignite easily, it may burn with the possible formation of irritating and poisonous gases or fumes. For small fires involving beryllium fluoride, extinguish with dry chemical, CO2, Halon, water spray, or standard foam, and for large fires, use water spray, fog, or standard foam. Wear an appropriate respirator and protective clothing when fighting such fires. Shipping regulations and other DOT regulatory requirements should be consulted before transport. Containers should be protected from physical damage, and stored in dry areas, away from acids, caustics, chlorinated hydrocarbons, and oxidizing materials. Small dry spills of beryllium fluoride may be shovelled into a clean, dry, covered container for latter disposal (solutions are first absorbed in sand or other noncombustible absorbant). Large liquid spills are diked far ahead of the spill for later disposal and to prevent runoff from causing pollution. Before implementing land disposal of beryllium fluoride waste, consult with environmental regulatory agencies for guidance.

Reactive GroupSalts, Acidic
EC ClassificationSymbol: T+, N; R: 49-25-26-36/37/38-43-48/23-51/53; S: 53-45-61; Note: A, E
UN ClassificationUN Hazard Class: 6.1; UN Pack Group: II
OSHA Standards · 3 items

Permissible Exposure Limit: Table Z-2 8-hr Time Weighted Avg: 2 ug/cu m. /Beryllium and beryllium compounds/

Permissible Exposure Limit: Table Z-2 Acceptable Ceiling Concentration: 5 ug/cu m. /Beryllium and beryllium compounds/

Permissible Exposure Limit: Table Z-2 Acceptable maximum peak above the acceptable ceiling concentration for an 8-hour shift. Concentration: 25 ug/cu m. Maximum Duration: 30 minutes. /Beryllium and beryllium compounds/

Reactivity Profile · 1 item

It reacts with water to form hydrofluoric acid, a source of fluoride ions. Unlike other halide ions, the fluoride ion is quite reactive, acting as a weak base and participating in some unique reactions. In particular, fluorides react strongly with compounds containing calcium, magnesium, or silicon ions, which means that solutions containing soluble fluorides are corrosive to both living tissue and glass. Hydrofluoric acid can cause severe chemical burns and is one of the few materials that can etch glass. It is also a toxic gas in its anhydrous form.

Atmospheric Standards · 1 item

Listed as a hazardous air pollutant (HAP) generally known or suspected to cause serious health problems. The Clean Air Act, as amended in 1990, directs EPA to set standards requiring major sources to sharply reduce routine emissions of toxic pollutants. EPA is required to establish and phase in specific performance based standards for all air emission sources that emit one or more of the listed pollutants. Beryllium compounds are included on this list. /Beryllium Compounds/

Chemical DangersReacts with strong acids.

Safety & protection

Fire Fighting · 2 items

Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]:

Use fine water spray. In case of fire in the surroundings, use appropriate extinguishing media.

First Aid Measures · 4 items

Fresh air, rest. Half-upright position. Refer for medical attention.

Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention . Wear protective gloves when administering first aid.

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Rinse mouth. Refer for medical attention .

First AidINHALATION: move to fresh air; chest x-ray should be taken immediately to detect pneumonitis, if exposure has been severe.
Safe StorageProvision to contain effluent from fire extinguishing. Separated from strong acids and food and feedstuffs. Well closed. Store only in original container. Store in an area without drain or sewer access.
Exposure Control and Personal Protection · 2 items

Biological Exposure Indices (BEI) [ACGIH] - Fluorides in urine = 2 mg/L prior to shift or 3 mg/L at end of shift; (Repeated measurements recommended.)

1.0 [mg/m3], inhalable fraction, as F[German Research Foundation (DFG)]

Fire Fighting Procedures · 2 items

If material involved in fire: Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.) Use water in flooding quantities as fog. Use "alcohol" foam, dry chemical or carbon dioxide. /Beryllium compound, NOS/

Wear positive pressure self-contained breathing apparatus when fighting fires involving this material. /Beryllium compound, NOS/

Storage ConditionsSeparated from strong acids, food and feedstuffs . Well closed.
Cleanup Methods · 2 items

Sweep spilled substance into sealable containers; if appropriate, moisten first to prevent dusting. Carefully collect remainder, then remove to safe place. Do NOT let this chemical enter the environment. Chemical protection suit including self-contained breathing apparatus.

Response to discharge: Issue warning poison, corrosive; Restrict access; Should be removed; chemical and physical treatment.

Nonfire Spill ResponseExcerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]:
Disposal Methods · 2 items

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal and plant life; and conformance with environmental and public health regulations.

SRP: Wastewater from contaminant suppression, cleaning of protective clothing/equipment, or contaminated sites should be contained and evaluated for subject chemical or decomposition product concentrations. Concentrations shall be lower than applicable environmental discharge or disposal criteria. Alternatively, pretreatment and/or discharge to a permitted wastewater treatment facility is acceptable only after review by the governing authority and assurance that "pass through" violations will not occur. Due consideration shall be given to remediation worker exposure (inhalation, dermal and ingestion) as well as fate during treatment, transfer and disposal. If it is not practicable to manage the chemical in this fashion, it must be evaluated in accordance with EPA 40 CFR Part 261, specifically Subpart B, in order to determine the appropriate local, state and federal requirements for disposal.

Spillage Disposal · 1 item

Personal protection: chemical protection suit including self-contained breathing apparatus. Do NOT let this chemical enter the environment. Sweep spilled substance into sealable containers. If appropriate, moisten first to prevent dusting. Carefully collect remainder. Then store and dispose of according to local regulations.

Preventive Measures · 5 items

SRP: The scientific literature for the use of contact lenses by industrial workers is inconsistent. The benefits or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.

The insidious nature of physiological action of beryllium even from minute exposures ... requires constant vigilance to minimize exposure, particularly to ... beryllium fluoride fume ...

SRP: Contaminated protective clothing should be segregated in such a manner so that there is no direct personal contact by personnel who handle, dispose, or clean the clothing. The completeness of the cleaning procedures should be considered before the decontaminated protective clothing is returned for reuse by the workers. Contaminated clothing should not be taken home at the end of shift, but should remain at employee's place of work for cleaning.

SRP: Local exhaust ventilation should be applied wherever there is an incidence of point source emissions or dispersion of regulated contaminants in the work area. Ventilation control of the contaminant as close to its point of generation is both the most economical and safest method to minimize personnel exposure to airborne contaminants. Ensure that the local ventilation moves the contaminant away from the worker.

For more Preventive Measures (Complete) data for BERYLLIUM FLUORIDE (10 total), please visit the HSDB record page.

Toxicology

TreatmentChronic beryllium disease is treated with immunosuppressive medicines, usually of the glucocorticoid class. (L24)
InteractionsExposure to beryllium fluioride enhanced the toxic response to beryllium sulfate.
Health Effects · 1 item

Acute inhalation of a high level of beryllium can result in a pneumonia-like condition called acute beryllium disease. Chronic inhalation of beryllium can cause an inflammatory reaction in the respiratory system called chronic beryllium disease. Chronic beryllium disease may result in anorexia and weight loss, as well as right side heart enlargement and heart disease in advanced cases. Chronic exposure can also increase the risk of lung cancer. Skin contact with beryllium results in contact dermatitus. (L24, L25)

Ecotoxicity Values · 5 items

LC50; Species: Pimephales promelas (fathead minnow); Conditions: static; Concentration: 150 ug/L for 96 hr, soft water; 20,000 ug/L for 96 hr, hard water /Beryllium ion/

LC50; Species: Lepomis macrochirus (bluegill); Conditions: static; Concentration: 1,300 ug/L for 96 hr, softwater; 12,000 ug/L for 96 hr, hardwater /Beryllium ion/

EC50; Species: Cladoceran (daphnia magna); Concentration: 2,500 ug/L for 48 hr; Effect: reproduction /Conditions of bioassay not specified in source examined/ /Beryllium ion/

LC50; Species: Carassius auratus (goldfish); Conditions: flow through, measured; Concentration: 4,800 ug/Be/L, time not specified /Beryllium ion/

For more Ecotoxicity Values (Complete) data for BERYLLIUM FLUORIDE (6 total), please visit the HSDB record page.

Adverse EffectsFibrogenic - Inducing tissue injury and fibrosis (scarring).
Exposure Routes · 2 items

The substance can be absorbed into the body in hazardous amounts by inhalation of its aerosol, by ingestion and through the skin.

Inhalation (L24)

Toxicity Summary · 1 item

Once in the body, beryllium acts as a hapten and interacts with human leucocyte antigen (HLA) DP presenting cells in the lungs, becoming physically associated with a major histocompatability (MHC) class II molecule. This MHC class II-beryllium-peptide complex is recognized by the T lymphocyte receptor, triggering CD4+ T lymphocyte activation and proliferation. The resulting inflammatory response is a cell-mediated process orchestrated by cytokines and results in the formation of (usually pulmonary) granulomas. Beryllium's toxicity may be controlled by the iron-storage protein ferritin, which sequesters beryllium by binding it and preventing it from interacting with other enzymes. (L25, A37, A91)

Signs and Symptoms · 5 items

Cough. Laboured breathing. Sore throat. Shortness of breath. Symptoms may be delayed.

Redness. Pain. MAY BE ABSORBED!

Redness. Pain.

Nausea. Vomiting. Abdominal pain.

Chronic beryllium disease causes fatigue, weakness, difficulty breathing, and a persistent dry cough. (L24, L25)

ICSC Environmental DataThe substance is toxic to aquatic organisms. The substance may cause long-term effects in the aquatic environment. It is strongly advised not to let the chemical enter into the environment.
Human Toxicity Excerpts · 5 items

/SIGNS AND SYMPTOMS/ Acute pulmonary lesions have resulted from few min inhalation of air containing the fluoride ... of beryllium.

/SIGNS AND SYMPTOMS/ Beryllium ... fluoride ... causes acute irritation of skin, eyes, & resp tract when ... exposed to /its/ dusts ... ocular irritation ... has not been serious, consisting of conjunctivitis, but scarcely ever involving cornea.

/SIGNS AND SYMPTOMS/ Hyperemia of conjunctiva & edema of lids which result from exposure to dust or direct contamination by particles are said to cause rather persistent burning sensation & photophobia, but recovery is usually complete in 5-10 days.

/SIGNS AND SYMPTOMS/ Acute contact dermatitis usually arises during extraction of beryllium by fluoride ... processes, not from contact with beryllium oxide powder.

For more Human Toxicity Excerpts (Complete) data for BERYLLIUM FLUORIDE (9 total), please visit the HSDB record page.

Carcinogen Classification1, carcinogenic to humans. (L135)
Non-Human Toxicity Excerpts · 5 items

/LABORATORY ANIMALS: Acute Exposure/ Beryllium ... fluoride ... cause acute irritation of skin, eyes & resp tract when ... animals are exposed to /its/ dusts ...

/LABORATORY ANIMALS: Acute Exposure/ Exptl injection of aq soln ... /in/ unspecified concn into cornea of rabbits has caused diffuse clouding within an hour, subsequently progressing to leukoma & permanent scarring.

/LABORATORY ANIMALS: Acute Exposure/ Heart enlargement was observed in monkeys after acute inhalation exposure to ... 0.184 mg Be/cu m as beryllium fluoride

/LABORATORY ANIMALS: Subchronic or Prechronic Exposure/ Groups of 4 female Macaca mulatta monkeys were exposed to aerosol concn of ... 27 ug/cu ft (964 ug/cu m) berylliuM fluoride ... for 6 hr per day over 7-30 days, followed by an observation period of 7-270 days in air. /Animals/ died of pneumonitis. Beryllium fluoride caused severe & universal pulmonary reactions (including desquamation, hyperplasia of bronchial epithelium & edema of the mucosa) & evoked changes in the liver (hepatocyte degeneration, sinusoid distension), kidneys (glomerular reaction & tubular degeneration), adrenals, pancreas, thyroid & spleen. Some of these damages were reversible, & others appeared to be progressive.

For more Non-Human Toxicity Excerpts (Complete) data for BERYLLIUM FLUORIDE (11 total), please visit the HSDB record page.

Regulatory information

Atmospheric Standards · 1 item

Listed as a hazardous air pollutant (HAP) generally known or suspected to cause serious health problems. The Clean Air Act, as amended in 1990, directs EPA to set standards requiring major sources to sharply reduce routine emissions of toxic pollutants. EPA is required to establish and phase in specific performance based standards for all air emission sources that emit one or more of the listed pollutants. Beryllium compounds are included on this list. /Beryllium Compounds/

CERCLA Reportable Quantities · 1 item

Persons in charge of vessels or facilities are required to notify the National Response Center (NRC) immediately, when there is a release of this designated hazardous substance, in an amount equal to or greater than its reportable quantity of 1 lb or 0.454 kg. The toll free number of the NRC is (800) 424-8802. The rule for determining when notification is required is stated in 40 CFR 302.4 (section IV.D.3.b).

Clean Water Act Requirements · 2 items

Beryllium fluoride is designated as a hazardous substance under section 311(b)(2)(A) of the Federal Water Pollution Control Act and further regulated by the Clean Water Act Amendments of 1977 and 1978. These regulations apply to discharges of this substance. This designation includes any isomers and hydrates, as well as any solutions and mixtures containing this substance.

Toxic pollutant designated pursuant to section 307(a)(1) of the Federal Water Pollution Control Act and is subject to effluent limitations. /Beryllium and compounds/

Federal Drinking Water StandardsMaximum contaminant level for inorganic contaminants: Contaminant: Beryllium; MCL 0.004 mg/L. /Beryllium/
Federal Drinking Water GuidelinesMaximum contaminant level goal for inorganic contaminants: Contaminant: Beryllium; MCLG 0.004 mg/L. /Beryllium/

Safety data

tsca
TSCA listed
ridadr
UN1566
Toxicity
LD50 orl-rat: 98 mg/kg XEURAQ UR-154,1951
risk_code
51/53-49-48/23-43-36/37/38-26-25
Signal word
Danger
Symbol(GHS)
GHS08,GHS09,GHS05,GHS06
hazard_code
N-T+,Xi
hazard_note
Irritant
safety_code
61-53-45
hazard_class
6.1
packing_group
II
Hazard statements
H350-H330-H311-H411-H301-H314-H372
Precautionary statements
P280-P302+P352-P312-P322-P361-P363-P405-P501-P264-P270-P301+P310-P321-P330-P405-P501-P260-P264-P280-P301+P330+P331-P303+P361+P353-P363-P304+P340-P310-P321-P305+P351+P338-P405-P501-P260-P264-P270-P314-P501-P260-P271-P284-P304+P340-P310-P320-P403+P233-P405-P501
Hazardous Substances Data
7787-49-7(Hazardous Substances Data)

Uses & manufacturing

Uses · 6 items

Used to make beryllium, beryllium alloys, glass, and welding/soldering fluxes; Also used in nuclear reactors; [HSDB]

Welding [Category: Weld]

Manufacture of beryllium and beryllium alloys; manufacture of glass; in nuclear reactors

... Intermediate in the preparation of beryllium, it is also sometimes used as an additive to welding and soldering fluxes because it dissolves metal oxides readily.

Production of beryllium metal by reduction with magnesium metal.

Most beryllium compounds, with the exception of beryllium oxide, have no commercial or technical use, and are only encountered in the production of beryllium metal as intermediary materials ... or as laboratory chemicals. /Beryllium compounds/

Impurities · 2 items

Beryllium fluoride-purity: 99.5%; impurities (mg/kg): Al, 75; Fe, 75; Ni, 40; Cu, 10.

Typical chemical composition & impurity limits for certain beryllium: anhydrous beryllium fluoride discs: beryllium 19.0%; aluminum 75 mg/kg; iron 75 mg/kg; nickel 40 mg/kg; copper 10 mg/kg. /From table/

U.S. Production · 3 items

2023: 550,000 - <1,000,000 lb

(1977) at least 4.54X10+7 g

Non-confidential 2012 Chemical Data Reporting (CDR) information on the production and use of chemicals manufactured or imported into the United States. Chemical: Beryllium fluoride. National Production Volume: Withheld.

Industry UsesHeat transferring agent
Methods of Manufacturing · 3 items

In the production of beryllium fluoride, beryllium hydroxide is dissolved in an ammonium hydrogen fluoride solution to produce ammonium tetrafluoroberyllate. Impurities can be precipitated as hydroxides. Upon concentration, ammonium tetrafluoroberyllate crystallizes from solution and is separated; after heating, it dissociates into ammonium fluoride and beryllium fluoride.

Prepared by heating ammonium fluoroberyllate (NH4)2BeF4.

By the thermal decomposition (900-950 °C) of ammonium beryllium fluoride.

Formulations/Preparations · 2 items

Beryllium fluoride-purity: 99.5%

Quarter inch pieces and smaller, 99.5% grades

General Manufacturing Information · 3 items

Utilities

Beryllium fluoride (BeF2): ACTIVE

Beryllium metal is obtained by reducing beryllium fluoride with a stoichiometric deficiency of magnesium; excess beryllium fluoride acts as flux permitting reaction @ lower temp; at 1300 °C beryllium floats on molten slag, from which it is poured; excess beryllium fluoride is recycled; ammonium fluoroberyllate is intermediate in prepn of beryllium fluoride from ammonium fluoride & impure beryllium oxide.

Applications · 5 items

DescriptionBeryllium fluoride has the formula, BeF2, and is a hygroscopic, amorphous solid with a melting point of 800°C. It is soluble in water and is used in beryllium metallurgy in which the metal, Be, is employed as an alloy. Solid crystalline BeF2 has a silica-like structure with beryllium in a four-coordinate position.

Usesmanufacture of Be and Be alloys; manufacture of glass; in nuclear reactors.

UsesBeryllium fluoride is used in biochemistry, particularly protein crystallography, since it binds in some of the same ways as phosphate does in human tissues. ADP and beryllium fluoride together tend to bind to ATP sites and inhibit protein action, making it possible to crystallize proteins in the bound state. Beryllium fluoride forms a basic constituent of the preferred fluoride salt mixture used in liquid-fluoride nuclear reactors. Typically, beryllium fluoride is mixed with LiF to form a base solvent, into which fluorides of uranium and thorium are introduced. Beryllium fluoride is exceptionally chemically stable and LiF/BeF2 mixtures have low melting points and the best neutronic properties of any of the fluoride salt combinations appropriate for reactor use.

UsesBeryllium fluoride (BeF2) is an example of beryllium that has an oxidation state of +2, combining with a negative anion element with an oxidation state of –1. Beryllium fluoride is also used along with magnesium metal in the chemical reduction process to produce beryllium metal.

General DescriptionOdorless white solid. Denser than water.

Preparation methods

PreparationBeryllium fluoride is made by thermal decomposition of ammonium beryllium fluoride at 900 to 950°C.

Additional notes · 1 item

DefinitionChEBI: The fluoride salt of beryllium (+2 oxidation state). In the solid state it exists as a glass, with four-coordinate Be2+ tetrahedral centres and two-coordinate fluoride centres. As a gas it adopts a linear triatomic structure and in the liquid state a fluctuating tetrahedral structure. In protein crystallography it is used as a mimic of phosphate.