13598-15-7O=P([O-])([O-])O.[Be+2]XUYHBCPJXPJTCK-UHFFFAOYSA-LBeryllium phosphate is a phospate of beryllium. Beryllium is a lightweight alkaline earth metal with the atomic number 4. It is a relatively rare element found naturally only combined with other elements in minerals. (L24)
13598-15-7DTXSID70929198Metals -> Beryllium Compounds, Inorganic
Carcinogens
Insoluble in water
Slightly soluble in water
Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.
May cause damage to the eyes; May cause skin sensitization; [MSDSonline] See Beryllium for one additional linked occupational disease.
The major hazards encountered in the use and handling of beryllium phosphate stem from its toxicologic properties. Toxic primarily by inhalation and dermal contact, effects from exposure may include skin ulceration, headache, fever, fatigue, chest pain, shortness of breath, pulmonary edema, and possibly death from heart failure. The OSHA PEL and ACGIH TLV are set at a TWA of 2 ug/cu m. Engineering control of process equipment (eg, enclosure and local exhaust ventilation) should be used to prevent inhalation and skin contact with beryllium phosphate. In activities where over-exposure is possible, workers should wear a self-contained breathing apparatus. Work clothes should not be taken home. Shipping regulations and other DOT regulatory requirements should be consulted before transport. Containers should be protected from physical damage, and stored in dry areas, away from acids, caustics, and chlorinated hydrocarbons, and oxidizing materials. Access to areas where beryllium phosphate has been discharged should be restricted, and the material removed for treatment or disposal. Before implementing land disposal of waste beryllium phosphate, consult with environmental regulatory agencies for guidance.
Permissible Exposure Limit: Table Z-2 8-hr Time Weighted Avg: 2 ug/cu m. /Beryllium and beryllium compounds/
Permissible Exposure Limit: Table Z-2 Acceptable Ceiling Concentration: 5 ug/cu m. /Beryllium and beryllium compounds/
Permissible Exposure Limit: Table Z-2 Acceptable maximum peak above the acceptable ceiling concentration for an 8-hour shift. Concentration: 25 ug/cu m. Maximum Duration: 30 minutes. /Beryllium and beryllium compounds/
Beryllium is absorbed mainly through the lungs, where it enters the bloodstream and is transported throughout the body by binding to prealbumins and gamma-globulins. Beryllium accumulates in lung tissue and the skeleton. It is excreted mainly in the urine. (L25)
After iv injection of 12.5-250 umol/kg body wt particulate beryllium phosphate ... beryllium phosphate was removed from the blood predominantly by the non-parenchymal (sinusoidal) cells & later distributed partly to parenchymal cells & partly to the spleen.
Beryllium phosphate and beryllium sulfate accumulated in both nonparenchymal and parenchymal cells of the liver after intravenous administration.
In this work, a chemical thermodynamic speciation code (MINTEQA2) has been used to model and understand the chemistry of beryllium in simulated human biological fluids such as intracellular, interstitial, and plasma fluids, a number of airway surface fluids for patients with lung conditions, saliva, sweat, urine, bile, gastric juice, and pancreatic fluid. The results show that predicted beryllium solubility and speciation vary markedly between each simulated biological fluid. Formation of beryllium hydroxide and/or phosphate was observed in most of the modeled fluids, and results support the postulation that beryllium absorption in the gastrointestinal tract may be limited by the formation of beryllium phosphate solids. It is also postulated that beryllium is potentially 13% less soluble in the airway surface fluid of a patient with asthma when compared to a "normal" case...
Most beryllium compounds, with the exception of beryllium oxide, have no commercial or technical use, and are only encountered in the production of beryllium metal as intermediary materials ... or as laboratory chemicals. /Beryllium compounds/
Beryllium foil is used in x-ray lithography for making integrated circuits. It is used as a reflector or moderator in nuclear reactions. Beryllium is used in gyroscopes and computer parts (L965).
Listed as a hazardous air pollutant (HAP) generally known or suspected to cause serious health problems. The Clean Air Act, as amended in 1990, directs EPA to set standards requiring major sources to sharply reduce routine emissions of toxic pollutants. EPA is required to establish and phase in specific performance based standards for all air emission sources that emit one or more of the listed pollutants. Beryllium compounds are included on this list. /Beryllium Compounds/
/GUIDE 154: SUBSTANCES - TOXIC AND/OR CORROSIVE (NON-COMBUSTIBLE)/ Health: TOXIC; inhalation, ingestion, or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. /Beryllium compound, NOS/
/GUIDE 154: SUBSTANCES - TOXIC AND/OR CORROSIVE (NON-COMBUSTIBLE)/ Fire or Explosion: Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.). Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. /Beryllium compound, NOS/
/GUIDE 154: SUBSTANCES - TOXIC AND/OR CORROSIVE (NON-COMBUSTIBLE)/ Public Safety: CALL Emergency Response Telephone Number ... As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. Keep unauthorized personnel away. Stay upwind. Keep out of low areas. Ventilate enclosed areas. /Beryllium compound, NOS/
/GUIDE 154: SUBSTANCES - TOXIC AND/OR CORROSIVE (NON-COMBUSTIBLE)/ Protective Clothing: Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible. /Beryllium compound, NOS/
For more DOT Emergency Guidelines (Complete) data for BERYLLIUM PHOSPHATE (8 total), please visit the HSDB record page.
NIOSH considers beryllium and beryllium compounds (as Be) to be potential occupational carcinogens. /Beryllium and beryllium compounds (as Be)/
Recommended Exposure Limit: Ceiling Value: 0.0005 mg/cu m. /Beryllium and beryllium compounds (as Be)/
NIOSH usually recommends that occupational exposures to carcinogens be limited to the lowest feasible concentration.
49 233 25; Beryllium phosphate
49 232 16; Beryllium compounds, not otherwise specified
No person may /transport,/ offer or accept a hazardous material for transportation in commerce unless that person is registered in conformance ... and the hazardous material is properly classed, described, packaged, marked, labeled, and in condition for shipment as required or authorized by ... /the hazardous materials regulations (49 CFR 171-177)./
The International Air Transport Association (IATA) Dangerous Goods Regulations are published by the IATA Dangerous Goods Board pursuant to IATA Resolutions 618 and 619 and constitute a manual of industry carrier regulations to be followed by all IATA Member airlines when transporting hazardous materials. /Beryllium compounds, NOS/
The International Maritime Dangerous Goods Code lays down basic principles for transporting hazardous chemicals. Detailed recommendations for individual substances and a number of recommendations for good practice are included in the classes dealing with such substances. A general index of technical names has also been compiled. This index should always be consulted when attempting to locate the appropriate procedures to be used when shipping any substance or article. /Beryllium compound, NOS/
If material involved in fire: Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.) Use water in flooding quantities as fog. Use "alcohol" foam, dry chemical or carbon dioxide. /Beryllium compound, NOS/
Wear positive pressure self-contained breathing apparatus when fighting fires involving this material. /Beryllium compound, NOS/
SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal and plant life; and conformance with environmental and public health regulations.
If material not involved in fire: Keep material out of water sources and sewers. /Beryllium compound, NOS/
Personnel protection: Avoid breathing dusts, and fumes from burning material. Keep upwind. Avoid bodily contact with the material. ... Do not handle broken packages unless wearing appropriate personal protective equipment. Wash away any material which may have contacted the body with copious amounts of water or soap and water. ... /Beryllium compound, NOS/
The worker should wash daily at the end of each work shift, and prior to eating, drinking, smoking, etc. /Beryllium and beryllium compounds (as Be)/
Work clothing that becomes wet or significantly contaminated sould be removed and replaced. /Beryllium and beryllium compounds (as Be)/
Workers whose clothing may have become contaminated should change into uncontaminated clothing before leaving the work premises. /Beryllium and beryllium compounds (as Be)/
0.00005 [mg/m3], as Be, inhalable fraction
8 hr Time Weighted Avg (TWA): 0.00005 mg/cu m (inhalable fraction); Skin. /Beryllium and compounds, as Be/
Excursion Limit Recommendation: Excursions in worker exposure levels may exceed 3 times the TLV-TWA for no more than a total of 30 minutes during a work day, and under no circumstances should they exceed 5 times the TLV-TWA, provided that the TLV-TWA is not exceeded. /Beryllium and compounds, as Be/
A1: Confirmed human carcinogen. /Beryllium and compounds, as Be/
2013 Notice of Intended Changes (NIC): Updates of Sensitizer (SEN) Notations to Dermal Sensitizer (DSEN) and/or Respiratory Sensitizer (RSEN). The following substances are placed on the NIC for review of this notation only. Substance: Beryllium and compounds, as Be; Time Weighted Avg (TWA): 0.00005 mg/cu m (Inhalable fraction); Short Term Exposure Limit (STEL): None; Notations: Skin; Dermal Sensitization (DSEN), Respiratory Sensitization (RSEN); A1: Confirmed human carcinogen.; Molecular Weight: 9.01; TLV Basis: Beryllium sensitization; Beryllium disease (berylliosis). /Beryllium and compounds, as Be/
Respirator Recommendations: At concentrations above the NIOSH REL, or where there is no REL, at any detectable concentration: /Beryllium and beryllium compounds (as Be)/[Table#1097]
Respirator Recommendations: Escape: /Beryllium and beryllium compounds (as Be)/ [Table#1098]
Wear appropriate personal protective clothing to prevent skin contact. /Beryllium and beryllium compounds (as Be)/
Wear appropriate eye protection to prevent eye contact. /Beryllium and beryllium compounds (as Be)/
Eyewash fountains should be provided in areas where there is any possibility that workers could be exposed to the substances; this is irrespective of the recommendations involving the wearing of eye protection. /Beryllium and beryllium compounds (as Be)/
4.0 [mg/m3], as Be
NIOSH considers beryllium and beryllium compounds (as Be) to be a potential occupational carcinogen. /Beryllium and beryllium compounds (as Be)/
Acute inhalation of a high level of beryllium can result in a pneumonia-like condition called acute beryllium disease. Chronic inhalation of beryllium can cause an inflammatory reaction in the respiratory system called chronic beryllium disease. Chronic beryllium disease may result in anorexia and weight loss, as well as right side heart enlargement and heart disease in advanced cases. Chronic exposure can also increase the risk of lung cancer. Skin contact with beryllium results in contact dermatitus. (L24, L25)
LC50; Species: Pimephales promelas (fathead minnow); Conditions: static; Concentration: 150 ug/L for 96 hr, soft water; 20,000 ug/L for 96 hr, hard water /Beryllium ion/
LC50; Species: Lepomis macrochirus (bluegill); Conditions: static; Concentration: 1,300 ug/L for 96 hr, softwater; 12,000 ug/L for 96 hr, hardwater /Beryllium ion/
EC50; Species: Cladoceran (daphnia magna); Concentration: 2,500 ug/L for 48 hr; Effect: reproduction /Conditions of bioassay not specified in source examined/ /Beryllium ion/
LC50; Species: Carassius auratus (goldfish); Conditions: flow through, measured; Concentration: 4,800 ug/Be/L, time not specified /Beryllium ion/
For more Ecotoxicity Values (Complete) data for BERYLLIUM PHOSPHATE (6 total), please visit the HSDB record page.
Once in the body, beryllium acts as a hapten and interacts with human leucocyte antigen (HLA) DP presenting cells in the lungs, becoming physically associated with a major histocompatability (MHC) class II molecule. This MHC class II-beryllium-peptide complex is recognized by the T lymphocyte receptor, triggering CD4+ T lymphocyte activation and proliferation. The resulting inflammatory response is a cell-mediated process orchestrated by cytokines and results in the formation of (usually pulmonary) granulomas. Beryllium's toxicity may be controlled by the iron-storage protein ferritin, which sequesters beryllium by binding it and preventing it from interacting with other enzymes. (L25, A37, A91)
/LABORATORY ANIMALS: Acute Exposure/ Iv admin beryllium phosphate suspensions (5-50 umol/kg) to rats gave vacuolization of hepatic kupffer cells within 3 hr. After 6 hr liver sinusoids contained many necrotic kupffer cells but no changes were detected in hepatic parenchymal cells during this period. Selective kupffer cell necrosis following iv admin of beryllium phosphate to rats is probable explanation for the reticuloendothelial blockade known to be caused in vivo by this compound.
/LABORATORY ANIMALS: Acute Exposure/ The fate of iv administered particles of beryllium phosphate 50 umol/kg has been investigated by electron microscopy in the liver of the rat. These particles were endocytosed by the Kupffer cells within 15 min of administration but they were never found in the-endothelial or parenchymal cel1s of the liver. Endocytosed particles were rapidly degraded within vesicles which were identified as secondary lysosomes. Pronounced swelling of these lysosomes subsequently developed, within 60 min of administration, resulting in distension of the entire cell. This vacuolation was entirely restricted to the Kupffer cells, particularly those in the pericanalicular region of the hepatic lobules. Lysosomal swelling, or even rupture, probably resulted in the subsequent death of these cells by the intra-cytoplasmic release of beryllium.
/LABORATORY ANIMALS: Acute Exposure/ A suspension of beryllium phosphate particles, the predominant form in which beryllium is transported in the bloodstream, was administered iv to rats. This form of beryllium is accumulated almost exclusively by the Kupffer cells of the liver. The liver from each rat was prepared for EM and analyzed by electron energy loss spectrometry. Beryllium was not detected in the nucleus or cytoplasm of any liver cells but its presence /detected/ within the secondary lysosomes of Kupffer cells.
/LABORATORY ANIMALS: Chronic Exposure or Carcinogenicity/ A 3-mm diameter neoplasm- probably alveolar carcinoma- in female monkey of the Macacus mulatta species died 82 days after the last of 10 daily exposures (6 hr/day) to aerosol of berylliuM phosphate at a concn of 373 ug/cu ft (13.2 mg/cu m).
For more Non-Human Toxicity Excerpts (Complete) data for BERYLLIUM PHOSPHATE (9 total), please visit the HSDB record page.
There is sufficient evidence in humans for the carcinogenicity of beryllium and beryllium compounds. Beryllium and beryllium compounds cause cancer of the lung. There is sufficient evidence in experimental animals for the carcinogenicity of beryllium and beryllium compounds. Beryllium and beryllium compounds are carcinogenic to humans (Group 1). /Beryllium and beryllium compounds/
A1; Confirmed human carcinogen. /Beryllium and compounds, as Be/
Beryllium and beryllium compounds are known to be human carcinogens based on sufficient evidence of carcinogenicity from studies in humans. /Beryllium and compounds/
Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Beryllium and Related Compounds/
Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Anticipate seizures and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 mL/kg up to 200 mL of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool. Administer activated charcoal ... . /Beryllium and Related Compounds/
Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious, has severe pulmonary edema, or is in severe respiratory distress. Positive-pressure ventilation techniques with a bag valve mask device may be beneficial. Consider drug therapy for pulmonary edema ... . Monitor cardiac rhythm and treat arrhythmias if necessary ... . Start IV administration of D5W /SRP: "To keep open", minimal flow rate/. Use 0.9% saline (NS) or lactated Ringer's (LR) if signs of hypovolemia are present. For hypotension with signs of hypovolemia, administer fluid cautiously. Watch for signs of fluid overload ... . Treat seizures with diazepam or lorazepam ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Beryllium and Related Compounds/
Listed as a hazardous air pollutant (HAP) generally known or suspected to cause serious health problems. The Clean Air Act, as amended in 1990, directs EPA to set standards requiring major sources to sharply reduce routine emissions of toxic pollutants. EPA is required to establish and phase in specific performance based standards for all air emission sources that emit one or more of the listed pollutants. Beryllium compounds are included on this list. /Beryllium Compounds/