Completing data — refresh the page later to see the latest
12027-67-7O.O.O.O.[Mo].[Mo].[Mo].[Mo].[Mo].[Mo].[Mo].[NH4+].[NH4+].[NH4+].[NH4+].[NH4+].[NH4+].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[O-2]XCOMAVCHADVANQ-UHFFFAOYSA-OAmmonium molybdate is a white to greenish-yellow solid. Sinks and mixes with water. (USCG, 1999)
1.4 at 68 °F 2.398 (USCG, 1999) - Denser than water; will sink
2.27 @25 °C
2.498 @25 °C
Ammonium molybdate is a white to greenish-yellow solid. Sinks and mixes with water. (USCG, 1999)
Liquid; Dry Powder; Large Crystals
White lumps or powder; Partially soluble in water; [MSDSonline]
Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.
This chemical does not meet GHS hazard criteria for 90.4% (281 of 311) of all reports.
Not Classified
Aggregated GHS information provided per 311 reports by companies from 10 notifications to the ECHA C&L Inventory.
Warning
H302: Harmful if swallowed [Warning Acute toxicity, oral]
P203, P260, P261, P264, P264+P265, P270, P271, P280, P301+P317, P304+P340, P305+P351+P338, P318, P319, P330, P337+P317, P403+P233, P405, and P501 (click each P-code to see the statement)
Molybdate (Mo7O246-), ammonium (1:6) is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Molybdate (Mo7O246-), ammonium (1:6) are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)
REACH registered substance: Hexaammonium heptamolybdate (EC: 234-722-4)
Restricted substance: Hexaammonium heptamolybdate
Ammonium molybdate: Does not have an individual approval but may be used under an appropriate group standard
Petroleum Lubricating Oil and Grease Manufacturing
Molybdate (Mo7O246-), ammonium (1:6): ACTIVE
DescriptionAmmonium molybdate tetrahydrate (also referred to as Ammonium heptamolybdate, chemical formula: (NH4)6Mo7O24)), appearing as a colorless solid. It can be manufactured through dissolving the molybdenum trioxide in excess amount of aqueous ammonia and evaporating the solution at the room temperature. It has many applications, e.g. as an analytic reagent for measuring content of phosphates, silicates, arsenates and lead; for the production of molybdenum metal and ceramics; for the production of dehydrogenation and desulphurization catalysts; for the fixing of metals; for electroplating; supplement in the crop fertilizer; as a negative stain in biological electron microscopy; as an analgesic in medical fields.
12027-67-7、12054-85-2、12501-45-0、13106-76-8Acidic salts, such as AMMONIUM MOLYBDATE, are generally soluble in water. The resulting solutions contain moderate concentrations of hydrogen ions and have pH's of less than 7.0. They react as acids to neutralize bases. These neutralizations generate heat, but less or far less than is generated by neutralization of inorganic acids, inorganic oxoacids, and carboxylic acid. They usually do not react as either oxidizing agents or reducing agents but such behavior is not impossible. Many of these compounds catalyze organic reactions.
Not Classified
Acute toxicity (Oral) - Category 4
3.1 [mg/m3]
11 [mg/m3]
66 [mg/m3]
2.8 [mg/m3]
30 [mg/m3]
180 [mg/m3]
1000 mg Mo/m3 (NIOSH, 2024)
1000.0 [mg/m3], as Mo
UsesDetermination of phosphates, arsenates, and lead.
UsesAmmonium molybdate tetrahydrate is widely utilized in cryo-negative staining which helps to visualize particles while preserving the sample. It is used as a catalyst to desulfurize thiophene and its derivatives. It serves as an analytical reagent to measure the amount of phosphates, silicates, arsenates and lead in an aqueous solution. It is also used in electroplating, in fertilizers for crops and in the production of molybdenum metal and ceramics. It is used as an analgesic in medical field.
General DescriptionAmmonium molybdate tetrahydrate (AMT) is a molybdenum salt. Study of its extraction from nickel-molybdenum (Ni–Mo) ore by direct hydrometallurgical method has been reported. Its degradation by combustion to form elemental molybdenum powder using metallic reducers has been investigated.