1321-65-9Clc1cc2ccccc2c(Cl)c1ClQEPTXDCPBXMWJC-UHFFFAOYSA-NTrichloronaphthalene is a colorless to pale-yellow solid with an aromatic odor. mp: 93 °C; bp: 304-354 °C. Used in lubricants and in the manufacture of insulation for electrical wire. Presents an environmental danger. If released into the environment, bioaccumulation takes place in fish. Will persist in the environment causing long-term adverse effects. The halowaxes are technical-grade chlorinated naphthalenes containing trichloronaphthalene in its various isomers together with (mainly) tetrachloro-, pentachloro-, and hexa-chloronapthalenes in their various isomers.
1321-65-9、50402-52-3DTXSID80198454log Kow= 5.12-5.35
5.12-7.56
1.58 (NIOSH, 2024) - Denser than water; will sink
1.58
1.58 g/cm³
1.58
1.58 @25 °C
1.58
Insoluble (NIOSH, 2024)
Water solubility: 0.017-0.064 mg/l at 25 °C /Trichloronaphthalene isomers/
Solubility in water: none
Insoluble
392 °F (NIOSH, 2024)
200 °C
(200 °C) (OPEN CUP)
200 °C o.c.
392 °F (open cup)
(oc) 392 °F
Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.
Danger
H302: Harmful if swallowed [Warning Acute toxicity, oral]
P260, P264, P270, P301+P317, P319, P330, and P501 (click each P-code to see the statement)
Danger
H302: Harmful if swallowed [Warning Acute toxicity, oral]
P260, P264, P264+P265, P270, P301+P317, P305+P351+P338, P319, P330, P332+P317, P337+P317, and P501 (click each P-code to see the statement)
Hazard Traits - Bioaccumulation; Environmental Persistence
SP - indicates a substance that is identified in a proposed Significant New Use Rule.
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]:
Combustible. Gives off irritating or toxic fumes (or gases) in a fire.
Chlorinated naphthalenes may be absorbed through the skin. They cause liver injury and hyperkeratosis in experimental animals. Penta- and hexachloronaphthalene may cause in exposed workers acne-like lesions that itch severely. Tri-, tetra-, and octachloronaphthalene are non-acnegenic under the conditions of industrial use. Nine occupational fatalities from chlorinated naphthalene poisoning have been reported. Most cases of intoxication among cable workers, assemblers, and laborers involve either penta- or hexachloronaphthalene. A nonfatal case of toxic hepatitis was reported in an 18 year old female who was soldering electrical condensers. [ACGIH] Acne-form dermatitis is listed as an adverse effect for all of the halowaxes except trichloronaphthalene in the Pocket Guide. [NIOSH] A mild skin and eye irritant; May cause liver injury; [ICSC]
Of the individual PCN congeners tested, penta-, hexa-, and heptachloronaphthalenes gave full dose- response curves, whereas most of the lower chlorinated congeners as well as octachloronaphthalene were inactive in /the rat hepatoma H4IIE-luc cell (luciferase) assay . The most potent congener was 1,2,3,4,6,7-hexachloronaphthalene . Similar results have been obtained by another study testing individual PCN congeners using the luciferase (and the EROD) assay with recombinant H4IIE rat hepatoma cells. Again, hexa- and heptachloronaphthalenes tested were the most potent congeners, /followed by/ Pentachlorinated congeners .Tetra, tri-, di-, and monochloronaphthalenes were found to be less active. There was also a rank order of potency within the penta- and hexachloronaphthalene isomers, in a manner suggesting that the presence of meta-substituted chlorines is linked to decreased potency. For example, for hexachloronaphthalenes, an approximate ranking order was given as 1,2,3,6,7,8 greater than 1,2,3,4,6,7 greater than 1,2,3,5,6,7 greater than 1,2,3,5,6,8.
Used in lubricants and in the manufacture of electrical wire insulation; [ACGIH]
The manufacturing of chlorinated naphthalenes (Halowax) has been discontinued in the USA since 1977.
Trichloronaphthalene has been employed in lubricants and in the manufacture of insulation for electrical wire. /SRP: Former Use/
... Except in special cases, chlorinated naphthalenes are no longer used in capacitors or electric cable coverings. Their use as lubricants has also been largely discontinued. Practice in individual countries varies, however. In the USA, for example, chlorinated naphthalenes are no longer used as wood preservatives. /Chlorinated naphthalenes/
There are no known commercial uses for purified individual isomers of di-, tri-, tetra-, penta-, hexa-, or heptachloronaphthalene.
(1977) MORE THAN 2.3X10+6 CHLORONAPHTHALENES
(1979) NOT PRODUCED COMMERCIALLY IN THE USA
... Exact yearly or total production figures are obscure. In 1972, the estimated market for PCNs was less than 2300 metric tons. /Polychlorinated naphthalenes/
579 to 669 °F at 760 mmHg (NIOSH, 2024)
BETWEEN 304.44 - 354.44 °C
304-354 °C
579-669 °F
579-669 °F
199 °F (NIOSH, 2024)
93 °C
93 °C
199 °F
92.78 °C
199 °F
8.0 (Air= 1 at boiling point of trichloronaphthalene)
Relative vapor density (air = 1): 8
Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. Trichloronaphthalene is included on this list.
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]:
Use water spray, foam, powder, carbon dioxide.
Fresh air, rest.
Remove contaminated clothes. Rinse and then wash skin with water and soap.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Excerpt from NIOSH Pocket Guide for Trichloronaphthalene:
(General first aid procedures)
TIH (Toxic Inhalation Hazard) - Term used to describe gases and volatile liquids that are toxic when inhaled. Some are TIH materials themselves, e.g., chlorine, and some release TIH gases when spilled in water, e.g., chlorosilanes. [ERG 2016].
Sweep spilled substance into containers; if appropriate, moisten first to prevent dusting. Carefully collect remainder, then remove to safe place. Do not let this chemical enter the environment.
1. Remove all ignition sources. 2. Ventilate area of spill. 3. For small quantities, sweep onto paper or other flammable material, place in an appropriate container, and burn in a safe place, such as a fume hood.
SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.
Incineration, preferably after mixing with another combustible fuel. Care must be exercised to assure complete combustion to prevent the formation of phosgene. An acid scrubber is necessary to remove the halo acids produced. Recommendable method: Incineration. Peer-review: Ensure plentiful supply of hydrocarbon fuel. (Peer-review conclusions of an IRPTC expert consultation (May 1985))
Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Do NOT let this chemical enter the environment. Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting. Carefully collect remainder. Then store and dispose of according to local regulations.
Clothing contaminated with trichloronaphthalene should be removed immediately and placed in closed containers until it can be discarded or until provision is made for the removal of trichloronaphthalene from the clothing.
Employees who handle trichloronaphthalene should wash their hands throughly with soap or mild detergent and water before eating, smoking, or using toilet facilities.
CONDENSER IMPREGNATION & OTHER OPERATIONS INVOLVING MELTING OF CHLORONAPHTHALENE SHOULD BE ENCLOSED OR PROVIDED WITH EFFECTIVE LOCAL EXHAUST VENTILATION. /CHLORONAPHTHALENES/
SRP: Local exhaust ventilation should be applied wherever there is an incidence of point source emissions or dispersion of regulated contaminants in the work area. Ventilation control of the contaminant as close to its point of generation is both the most economical and safest method to minimize personnel exposure to airborne contaminants.
For more Preventive Measures (Complete) data for TRICHLORONAPHTHALENE (9 total), please visit the HSDB record page.
TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 8100(SRC), determined from a structure estimation method(2), indicates that trichloronaphthalene is expected to be immobile in soil(SRC). Volatilization of trichloronaphthalene from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 2.1X10-4 atm-cu m/mole(SRC), using a fragment constant estimation method(3). However, adsorption to soil may attenuate this process. Trichloronaphthalene is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 3.1X10-4 mm Hg(SRC), determined from a fragment constant method(4). Monochloronaphthalenes appear to be readily degradeable by soil and water microorganisms under aerobic conditions(5). No information was found on the biodegradation of higher chlorinated congeners by microorganisms(5); however, the addition of chlorines to aromatic structures is known to decrease biodegradability(6).
AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 8100(SRC), determined from a structure estimation method(2), indicates that trichloronaphthalene is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 2.1X10-4 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 5 hours and 8 days, respectively(SRC). However, volatilization from water surfaces is expected to be attenuated by adsorption to suspended solids and sediment in the water column. The estimated volatilization half-life from a model pond is 141 days if adsorption is considered (5). According to a classification scheme(6), a measured BCF value of 27,000 for 1,3,7,-trichloronaphthalene in guppies(7), suggests bioconcentration in aquatic organisms is very high(SRC). Halogenated aromatics are generally resistant to aqueous environmental hydrolysis(3); therefore, trichloronaphthalene is not expected to hydrolyze in water(SRC). Monochloronaphthalenes appear to be readily degradeable by soil and water microorganisms under aerobic conditions(8). No information was found on the biodegradation of higher chlorinated congeners by microorganisms(8); however, the addition of chlorines to aromatic structures is known to decrease biodegradability(9).
ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), trichloronaphthalene, which has an estimated vapor pressure of 3.1X10-4 mm Hg at 25 °C (SRC), determined from a fragment constant method(2), is expected to exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase trichloronaphthalene is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 8 days(SRC), calculated from its rate constant of 2X10-12 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Particulate-phase trichloronaphthalene may be removed from the air by wet and dry deposition(SRC). Naphthalene and its derivatives absorb light in the environmental UV spectrum and may be susceptible to direct photolysis(4). However, the rate of this reaction is not known for trichloronaphthalene(SRC).
The substance can be absorbed into the body by inhalation of fume and through the skin.
inhalation, skin absorption, ingestion, skin and/or eye contact
IDENTIFICATION: There are 75 possible congeners of chlorinated naphthalenes. Commercial products are generally mixtures of several congeners and range from thin liquids to hard waxes to high melting point solids. The higher chlorinated naphthalene products have been used as impregnants for condensers and capacitors and dipping encapsulating cmpd in electronic and automotive applications and as temporary binders in the manufacture of ceramic components, in paper coating and in precision casting of alloys, in electroplating, stop-off cmpd, as additive in gear oils and cutting cmpd, in flame proofing and insulation of electrical cable and conductors and moisture proof sealants, as separators in batteries, in refractive index testing oils, masking cmpd in electroplating and in grinding wheel lubricants. HUMAN EXPOSURE: The major sources of release of chlorinated naphthalenes into the environment are likely from waste incineration and disposal of items containing chlorinated naphthalenes to landfill. In the past, chlorinated naphthalene concn of up to 14.5 mg/cu m have been measured in the workplace, while levels of 25-2900 ng/cu m have been recorded in out door air in vicinity of manufacturing sites. More recently, monitoring studies have revealed chlorinated naphthalene concn up to 150 pg/cu m at semirural sites and 1-40 pg/cu m at remote sites. Predominant cogners in out door air were tri- and tetrachloronaphthalenes. Recent monitoring studies Chlorinated naphthalenes can be absorbed via oral, inhalative and dermal routes, with absorption and distribution over the whole body after oral admin. Chlorinated naphthalenes, especially the dioxin like congeners, have been detected in adipose tissue, liver, blood and breast milk samples from the general population at concn in the ng/kg lipid range. Severe skin reactions (chloracne) and liver disease have been reported after occupational exposure to chlorinated naphthalenes. Chloracne was common among workers who handling chlorinated naphthalenes in the 1930's to 1940's. A cohort study on workers exposed to chlorinated naphthalenes at a cable manufacturing plant found an excess of deaths from cirrhosis of the liver. However, individuals with chloracne did not show a higher mortality due to liver cirrhosis compared with other workers. The mortality from all cancers was slightly but significantly elevated among all exposed men (standardized mortality ratio =1.18, but was not more elevated in the subcohort with chloracne. This subcohort showed statistically significant excess mortality from cancer of the esophagus and from benign and unspecified neoplasms. Symptoms described in workers exposed to chlorinated naphthalenes included irritation of the eyes, fatigue, headache, anemia, hematuria, impotency, anorexia, vomiting and severe abdominal pain. ANIMAL STUDIES: Chlorinated naphthalenes have been shown to be highly bioaccumulative in fish, but less so in shrimp and algae. The amount of bioaccumulation observed incr with the degree of chlorination of the chlorinated naphthalenes. The most highly chlorinated naphthalenes do not appear to bioaccumulate. Chlorinated naphthalene concn in fish range up to a maximum of around 300 ug/kg lipid weight. 1,2,3,4-Tetrachloronaphthalene has demonstrated no mutagenicity in the Salmonella Ames test. Monitoring studies with seabird eggs have revealed a decr in chlorinated naphthalene levels between 1974 and 1987. Hydroxy metabolites have been identified mostly for the lower chlorinated naphthalenes (mono- to tetra-) in experimental animals. There are also preliminary indications for the occurrence of methylthio- or methyl sulfoxide chloronaphthalene metabolites in the feces of rats. Elimination of the parent compounds and/or metabolites occurs via feces and urine. The higher chlorinated congeners appeared to be more toxic than the lower chlorinated ones. Longterm and carcinogenicity studies with chlorinated naphthalenes have not been performed. Like related cmpd, chlorinated naphthalenes have been demonstrated to be inducers of the cytochrome p450 (CYP) dependent microsomal enzymes. Chlorinated naphthalenes were also found to change lipid peroxidation and antioxidant enzyme activities in rats in a manner indicative of oxidative stress. At least some of the biological and toxic responses of chlorinated naphthalenes are believed to be mediated via the cytosolic Ah receptor, resembling those of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and related cmpd. All chlorinated naphthalenes tested cause skin irritations in laboratory animals. Chlorinated napthalenes appear to be of moderate to high acute toxicity to aquatic organisms. Tetra- and pentachloronaphthalene congeners tend to predominate in the biota. /Chlorinated naphthalenes, Higher Chlorinated Naphthalenes/
/BIRDS and MAMMALS/ Effects of a German wood preservative were studied in heifers. Two calves were placed in a shed built with treated wood and compared with heifers kept in an untreated building. A blanket holding preservative treated material was kept in place on the animal's back for 9 months. Seven calves were fed the wood preservative or active fractions isolated from it. Plasma vitamin-A concentrations were determined. Gas chromatography was also used on fractions of the preservative to determine composition. Contact exposures with the wood and blanket produced definite skin lesions in 3 weeks. The harmful action spread beyond the area covered by the blanket. Despite skin lesions, the animals remained in good condition. Calves fed the wood preservative or active fractions showed all symptoms and lesions of hyperkeratosis. Lacrimation, depression, and emaciation were manifested in 3-6 weeks. Plasma vitamin-A concentrations were consistently lower in animals kept in the shed built of treated wood, but no severe deficiency was seen in these animals or in the animals which wore the treated blanket. However, the calves fed small amounts of preservative suffered severe vitamin-A deficiency and marked internal lesions. Gas chromatographic determination showed the active fraction to contain trichloronaphthalene and some more highly chlorinated naphthalenes. ...
/AQUATIC SPECIES/ This substance may be hazardous to the environment; special attention should be given to crustacea. In the food chain important to humans, bioaccumulation takes place, specifically in fish. It is strongly advised not to let the chemical enter into the environment because it persists in the environment. The substance may cause long-term effects in the aquatic environment.
Redness.
Redness. Pain.
Nausea. Vomiting.
anorexia, nausea; dizziness; jaundice, liver injury
Bioaccumulation of this chemical may occur along the food chain, for example in crustacea. Bioaccumulation of this chemical may occur in fish. It is strongly advised not to let the chemical enter into the environment because it is persistent. The substance may cause long-term effects in the aquatic environment.
Using a structure estimation method based on molecular connectivity indices(1), the Koc for trichloronaphthalene can be estimated to be 8100(SRC). According to a classification scheme(2), this estimated Koc value suggests that trichloronaphthalene is expected to be immobile in soil(SRC).
/HUMAN EXPOSURE STUDIES/ While some cases of chloracne have been reported, incidence & severity have been less when trichloronaphthalene was only material used than when penta- or hexachloronaphthalene was present.
/HUMAN EXPOSURE STUDIES/ Industrial experience with trichloronaphthalene (usually mixed with some tetrachloronaphthalene) has been favorable in comparison with the more highly chlorinated naphthalenes. ... Studies with human voluteers showed that the mist of trichloronaphthalene was entirely nonacneigenic as compared to that observed after exposure to the penta and hexachloro-derivatives, which produced severe chloroacne.
/HUMAN EXPOSURE STUDIES/ Until 1957 there was general agreement that as degree of chlorination incr so did acneigenic properties & systemic toxicity of the chloronaphthalenes. According to ... result of ... expt on human volunteers, the unexpected fact emerged that whereas tri-, tetra-, hepta-, & octachloronaphthalenes were entirely nonacneigenic, penta- & hexachloro derivatives produced very severe chloracne indeed.
/HUMAN EXPOSURE STUDIES/ Skin conditions resulting from exposure to certain chlorinated hydrocarbons were studied in electrical condenser employees. The 31 workers examined in two facilities that used a combination of trichloronaphthalene (1321659) and tetrachloronaphthalene (1335882) in the manufacture of condensers were all employed in the finishing departments. Exposure to the chlorinated naphthalenes resulted in acneform eruptions, characterized by pustules, papules, and comedones. Eruptions usually occurred within the first few months of employment. Incidence of acneform eruptions appeared to be higher in summer than in winter. Acneform eruptions differed from acne commonly found among adolescents. One case of permanent facial disfigurement in a young girl involved the deeper layers of skin. In severe cases, there was a tendency to secondary infection, especially when there was coexisting pruritus and if the worker scratched the lesions. In one case, furunculosis of the cheek, superimposed on a severe acneform eruption, resulted in death from septicemia. ...
For more Human Toxicity Excerpts (Complete) data for TRICHLORONAPHTHALENE (6 total), please visit the HSDB record page.
Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. Trichloronaphthalene is included on this list.
Naphthalene, trichloro-: ACTIVE
Koppers Co, Inc., the sole U.S. producer, ceased manufacturing their chloronaphthalene products (Halowax) in 1977.
Commercial PCNs were produced by several companies, eg, Koppers Chemical Co., Halochem, Prodelec, Bayer, and ICI, and marketed under a number of trade names including Halowaxes, Nibren wasex, Seekay waxes, and Clonacire waxes. /Polychlorinated naphthalenes/
... Most of the commercial PCNs were complex mixtures of isomers and cogeners, although two products, namely monoPCN and Halowax 1051/N-Wax 80, contained primarily 1-chloronaphthalene and octachloronaphthalene, respectively. /Polychlorinated naphthalenes/
UsesWire coating, electrical insulations.
UsesElectric wire insulation; lubricants.
General DescriptionColorless to pale-yellow solid with an aromatic odor. Mp: 93°C; bp: 304-354°C. Used in lubricants and in the manufacture of insulation for electrical wire. Presents an environmental danger. If released into the environment, bioaccumulation takes place in fish. Will persist in the environment causing long-term adverse effects. The halowaxes are technical-grade chlorinated naphthalenes containing trichloronaphthalene in its various isomers together with (mainly) tetrachloro- pentachloro- and hexa-chloronapthalenes in their various isomers.