HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Trimethylsilylacetylene

HCID 66111
New reaction
Print
Basic informationNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
1066-54-2
Standard SMILES
C#C[Si](C)(C)C
InChIKey
CWMFRHBXRUITQE-UHFFFAOYSA-N
Molecular formula
C5H10Si
Average molar mass
98.22 g/mol
Monoisotopic mass
98.05517685

Names & identifiers

Preferred name
Trimethylsilylacetylene
IUPAC
ethynyl(trimethyl)silane
English name
Trimethylsilylacetylene
Molecular formula
C5H10Si
Molecular weight
98.22

Names & synonyms

EthynyltrimethylsilaneTrimethylsilylacetylene1066-54-2(Trimethylsilyl)acetyleneSilane, ethynyltrimethyl-TMS-acetyleneTrimethylethynylsilanetrimethylsilanylethyne1-(Trimethylsilyl)acetylene1-TrimethylsilylethyneJ82T3C3BGVACETYLENYLTRIMETHYLSILANE
Show more names
TMSATMS ACETYLENE(Trimethylsilyl)ethyneETHINYLTRIMETHYLSILANEThimethylsilylacetylene(Thrimethylsilyl)acetylene
DTXSID70614352,2-DIMETHYL-2-SILA-3-BUTYNERefChem:1181773213-919-9ethynyl(trimethyl)silaneethynyl-trimethyl-silanetrimethylsilylethynetrimethylsilyl acetylene

Database identifiers

CAS
1066-54-2、7299-46-9
PubChem CID
66111
DTXSID
DTXSID7061435
UNII
J82T3C3BGV
EC Number
213-919-9、685-813-4
Nikkaji
J209.060K

Properties

Computed structural properties

Topological polar surface area
0 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
0
Rotatable bonds
1
Heavy atoms
6
Formal charge
0
Complexity
77.8

Experimental & physicochemical properties

Chemical ClassesMetals -> Metalloid Compounds (Silicon)
SpringerMaterials Properties29Si nuclear magnetic resonance spectrum
Vapor Pressure224.0 [mmHg]
Physical DescriptionColorless liquid; [Alfa Aesar MSDS]

Physicochemical properties

Melting point
0 °C · >0°C
Boiling point
53 °C · 53 °C (127 °F; 326 K)
Density
0.709 g/mL · 0.709 g/mL
vapor pressure
4.18 psi · 4.18 psi ( 20 °C)
refractive index
1.39 · 1.39
Flash point
-34 °C · -34 °C
storage temp.
30 °C · Store below +30°C.
solubility
Miscible with organic solvents.
form
liquid

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

Danger

H225 (72.1%): Highly Flammable liquid and vapor [Danger Flammable liquids]

P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P305+P354+P338, P317, P319, P321, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 86 reports by companies from 12 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Danger

H225 (100%): Highly Flammable liquid and vapor [Danger Flammable liquids]

Hazard information

Regulatory Information · 2 items

REACH registered substance: Trimethylsilylacetylene (EC: 213-919-9)

Trimethylsilylacetylene: HSNO Approval: HSR006727 Approved with controls

Hazards SummaryMay cause irritation; [Alfa Aesar MSDS] See 1-Phenyl-2-(trimethylsilyl)acetylene and Phenylacetylene.
Hazard Classes and Categories · 2 items

Flam. Liq. 2 (72.1%)

Flam. Liq. 2 (100%)

CSL Reaction Information · 6 items

CSL00196

(Trimethylsilyl)acetylene + Acetone + Oxygen

"We would like to report an explosion that occurred in our laboratory last year while performing an oxidative coupling of trimethylsilylacetylene (TMSA) in a Glaser-Hay reaction. The explosion ruptured the 2-L reaction flask and seriously injured a researcher. This reaction has been routinely used in our and many other laboratories to prepare 1,4-bis(trimethylsilyl)butadiyne-1,3 on a large scale (>100 g), and no dangerous or unusual behavior was previously noted. The procedure involves purging oxygen through a solution of TMSA in acetone in the presence of a copper(I) chloride:tetramethylethylenediamine complex catalyst at room temperature as described by Andrew B. Holmes et al. (Org. Syntheses 1993, Coll. Vol. 8, 63). The authors of the procedure recommend a safety shield as a general precaution while working with flammable materials in the atmosphere of oxygen, although no hazard was ever encountered. In this incident, the explosion occurred as soon as we started adding the solution of catalyst in acetone to the reaction. We have consulted with the pioneer of this reaction (Allan S. Hay) and the submitting author of the procedure (Holmes) and considered various scenarios to explain the explosion. Ignition of acetone/TMSA vapor by the external sources was hardly possible as the flask was well sealed and the outgoing gases were passed through a dry-ice condenser (lowering the vapor pressure below the explosive concentration) and brought to the back side of the fume hood through a 1-meter hose. The reaction temperature (5 ºC) was noted by the researcher a few seconds before the explosion, thus ruling out unexpected reaction exothermy. The autoignition of the vapor on a hot stirring adapter (possibly heated by rotation-induced friction) was refuted, because joint lubrication was checked before setting up the experiment, and it would have required achieving an unrealistic temperature of greater than 300 ºC. Also, the explosion occurred upon adding the first few drops of copper catalyst, which makes crystallization of the explosive intermediate—copper bis(trimethylsilylacetylide)—highly improbable. We speculate that a discharge of static electricity between the syringe needle and the digital thermometer inside the flask is the most likely cause of this explosion. A digital thermometer connected to a stirring hot plate (IKA) was used in the reaction, and a plastic syringe with a long metal needle was introduced through the same neck. An induced static voltage on the syringe through friction from handling (often observed in Montreal winter indoors while walking or even simply sitting) could then cause a sufficient differential potential on the needle for a discharge spark to occur close to the metallic body of the digital thermometer. The oxygen-rich atmosphere lowers the ignition energy and makes even a weak spark sufficient to cause a fire. The incident emphasizes once more the potential danger of mixing oxygen gas with flammable solvents or reagents. More important, introducing two conductors into a flask brings a risk of static electricity discharge between the conductors, which is dangerous whenever a flammable solvent is used without inert gas. As wired metal-gauge digital thermometers are used more often in synthetic practice, precautions must be taken to avoid their contact with other metallic (conducting) parts inside the reaction flasks." (reprint of the full-text)

Chemistry & industry

Uses & manufacturing

General Manufacturing InformationSilane, ethynyltrimethyl-: ACTIVE
Applications · 4 items

UsesEthynyltrimethylsilane was used in: microwave-assisted, one-pot, three-step Sonogashira cross-coupling-desilylation-cycloaddition reaction for the preparation of 1,4-disubstituted 1,2,3-triazoles synthesis of poly(ethynyltrimethylsilane) containing Pd (II) coordination sites pyrazole synthesis via 1,3-dipolar cycloaddition of diazo compounds to acetylenes

UsesTrimethylsilylacetylene is a valuable reagent used in ethynylation by palladium(0)-catalyzed coupling/condensation with aryl and vinyl halides and triflates, or by nucleophilic attack of the corresponding acetylide on electrophilic centers; reacts with alkyl iodides, tin hydrides,6 and dichloroketene in a regioselective and stereoselective manner, participating in the following synthesis reactions: Ethynylations, Palladium(0)-Catalyzed Coupling Reactions,Reaction of Trimethylsilylacetylides with Electrophiles, Radical-Initiated and Transition Metal-Catalyzed Additions, Cycloaddition Reactions, Ethynylations, Cycloaddition Reactions, Further Transformations etc.

Uses(Trimethylsilyl)acetylene is used in the preparation of trimethylsilanyl-propiolic acid ethyl ester by reacting with carbonochloridic acid ethyl ester as well as in the synthesis of iodoalkenes by radical addition of perfluoroalkyl iodides. It is used as a nucleophile in Friedel-Crafts type acylations and alkylations reactions, as a ligand in organometallic chemistry and an useful reagent in cycloaddition reactions. It acts as a precursor to lithium trimethylsilylacetylide It finds application in the synthesis of (±)-estrone.

General DescriptionLaser-induced polymerization of gaseous ethynyltrimethylsilane was used for efficient chemical vapour deposition of polycarbosilane films. Ethynyltrimethylsilane acts as substrate for nickel-catalyzed cross-coupling with benzonitriles.

Upstream & downstream products

Upstream raw materials

Related reactions

3,402 records
New reaction record
HRID 1216 reaction equation
HRID 1216As reactant
HRID 1307 reaction equation
HRID 1307As reactant
HRID 2297 reaction equation
HRID 2297As reactant
HRID 6530 reaction equation
HRID 6530As reactant
HRID 6536 reaction equation
HRID 6536As reactant
HRID 6541 reaction equation
HRID 6541As reactant
HRID 6556 reaction equation
HRID 6556As reactant
HRID 7197 reaction equation
HRID 7197As reactant
PreviousPage 1 of 426

Compound notes

On this pageBasic informationNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
color
colorless
Specific Gravity
0.695 · 0.695
Water Solubility
reacts
Hydrolytic Sensitivity
4 · 4: no reaction with water under neutral conditions
BRN
906752 · 906752
InChI
1S/C5H10Si/c1-5-6(2,3)4/h1H,2-4H3
InChIKey
CWMFRHBXRUITQE-UHFFFAOYSA-N
SMILES
C[Si](C)(C)C#C
CAS DataBase Reference
1066 · 1066-54-2(CAS DataBase Reference)
NIST Chemistry Reference
(Trimethylsilyl)acetylene(1066-54-2)
EPA Substance Registry System
Trimethylsilylacetylene (1066-54-2)
UNSPSC Code
12352103 · 12352103
NACRES
22 · NA.22
Symbol(GHS)
2 · GHS02,GHS07
Signal word
Danger
Hazard statements
225 · H225-H315-H319
Precautionary statements
210 · P210-P233-P240-P241-P303+P361+P353-P305+P351+P338
PPE
Faceshields, Gloves, Goggles
Hazard Codes
F,Xi
Risk Statements
11 · 11-36/37/38
Safety Statements
16 · 16-26-36
RIDADR
1993 · UN 1993 3/PG 2
WGK Germany
-
Hazard Note
Flammable/Irritant
TSCA
TSCA listed
HazardClass
3 · 3
PackingGroup
II
HS Code
2931900090 · 2931900090
Storage Class
3 · 3 - Flammable liquids
Hazard Classifications
2 Flam · Eye Irrit. 2Flam. Liq. 2Skin Irrit. 2
REACH Registrations
Active
Limited Quantities
1 L · 1.0 L (0.3 gallon) (liquid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (500g or 500ml)

Explosive

Large (>100g)

Oxidation

Safety data

PPE
Faceshields, Gloves, Goggles
wgk
-
tsca
TSCA listed
ridadr
UN 1993 3/PG 2
hs_code
2931900090
risk_code
11-36/37/38
Signal word
Danger
Symbol(GHS)
GHS02,GHS07
hazard_code
F,Xi
hazard_note
Flammable/Irritant
safety_code
16-26-36
hazard_class
3
Storage Class
3 - Flammable liquids
packing_group
II
Hazard statements
H225-H315-H319
Limited Quantities
1.0 L (0.3 gallon) (liquid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (500g or 500ml)
REACH Registrations
Active
Hazard Classifications
Eye Irrit. 2Flam. Liq. 2Skin Irrit. 2
Precautionary statements
P210-P233-P240-P241-P303+P361+P353-P305+P351+P338
TolueneChlorotrimethylsilaneSodiumTetrahydrofuranAcetyleneBromoethaneMagnesium sulfate heptahydrate

Downstream products

4-Ethynylaniline1,3-Dithiole-2-thione4-Azaindole1-Phenyl-2-propyn-1-ol1-Chloro-5-(trimethylsilyl)-4-pentyne3-Trimethylsilyl-2-propyn-1-ol5-methylenefuran-2(5H)-oneBenzaldehyde, 2-ethynyl-4-fluoro- (9CI)3,4-Dichlorophenylacetylene2,6-Diethynylpyridine4,4'-DifluorodiphenylacetyleneDi-p-tolylacetylene