HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Propyltrichlorosilane

HCID 8850
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
141-57-1
Standard SMILES
CCC[Si](Cl)(Cl)Cl
InChIKey
DOEHJNBEOVLHGL-UHFFFAOYSA-N
Molecular formula
C3H7Cl3Si
Average molar mass
177.53 g/mol
Monoisotopic mass
175.93825979

Overview

Propyltrichlorosilane appears as a colorless liquid with a pungent odor. Corrosive to metals and tissue.

Names & identifiers

Preferred name
Propyltrichlorosilane
IUPAC
trichloro(propyl)silane
English name
Trichloropropylsilane
Molecular formula
C3H7Cl3Si
Molecular weight
177.53

Names & synonyms

Trichloro(propyl)silanePropyltrichlorosilane141-57-1n-PropyltrichlorosilaneTRICHLOROPROPYLSILANEPropyl trichlorosilaneTrichloro-n-propylsilaneSilane, propyltrichloro-UNII-X16G85FI4YNSC 93878HSDB 889X16G85FI4Y
Show more names
DK075CP0800trichloropropyl-silanpropyltrichloro-silanTrichloro(propyl)sila
DYNASYLAN PTCSEINECS 205-489-6NSC-93878AI3-60044DTXSID80861813EC 205-489-6RefChem:9097DTXCID60810687

Database identifiers

CAS
141-57-1
PubChem CID
8850
DTXSID
DTXSID80861813
UNII
X16G85FI4Y
EC Number
205-489-6
Nikkaji
J102.581C

Properties

Computed structural properties

Topological polar surface area
0 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
0
Rotatable bonds
1
Heavy atoms
7
Formal charge
0
Complexity
48.6

Experimental & physicochemical properties

Chemical Classes · 2 items

Toxic Gases & Vapors -> Chlorosilanes

Corrosives

SpringerMaterials Properties29Si nuclear magnetic resonance spectrum
OdorACRID ODOR
Density · 2 items

1.195 g/cu cm at 20 °C

1.195 @ 20°C

Color/Form · 2 items

Liquid

COLORLESS LIQUID

SolubilitySOL IN WATER
CorrosivityCorrosive
Flash Point · 2 items

98 to 100 °F (NFPA, 2010)

98 °F (37 °C) Closed cup

Boiling Point · 2 items

123.5 °C

123.5 °C @760 [mm Hg]

Decomposition · 3 items

Hydrogen chloride and phosgene gases may form; both are toxic and irritating.

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 4 items

Danger

H226 (100%): Flammable liquid and vapor [Warning Flammable liquids]

P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P280, P301+P317, P301+P330+P331, P302+P361+P354, P303+P361+P353, P304+P340, P305+P354+P338, P316, P321, P330, P363, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 77 reports by companies from 7 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Hazard information

Hazards IdentificationWater-reactive material (WR)
Regulatory Information · 5 items

Chemical: Silane, trichloropropyl-

Silane, trichloropropyl- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Silane, trichloropropyl- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: Trichloro(propyl)silane (EC: 205-489-6)

Silane, trichloropropyl-: Does not have an individual approval but may be used as a component in a product covered by a group standard. It is not approved for use as a chemical in its own right.

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT LabelCorrosive Flammable Liquid
Fire Hazards · 2 items

Excerpt from ERG Guide 155 [Substances - Toxic and/or Corrosive (Flammable / Water-Sensitive)]:

· HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Chemistry & industry

Pharmacology

Metabolism/Metabolites... Chlorosilanes will be rapidly hydrolyzed upon contact with tissue fluids to release hydrochloric acid. /Chlorosilanes/

Uses & manufacturing

Uses · 3 items

Used as intermediate for silicones; [HSDB]

Toxic Gas from Spilling Chemical in Water [Category: Other]

Intermediate for silicones

U.S. Production · 3 items

2023: 1,000,000 - <2,500,000 lb

Production volumes for non-confidential chemicals reported under the Inventory Update Rule. [Table#2350]

Production volume for non-confidential chemicals reported under the 2006 Inventory Update Rule. Chemical: Silane, trichloropropyl-. Aggreated National Production Volume: <500,000 lbs.

Industry UsesIntermediate
Methods of ManufacturingBy Grignard reaction of silicon tetrachloride and propylmagnesium chloride.
Formulations/PreparationsGrade: Technical
General Manufacturing Information · 2 items

All Other Basic Inorganic Chemical Manufacturing

Silane, trichloropropyl-: ACTIVE

Applications

UsesIntermediate for silicones.

General DescriptionA colorless liquid with a pungent odor. Flash point 100°F. Corrosive to metals and tissue.

Upstream & downstream products

Upstream raw materials

Related reactions

4 records
New reaction record
HRID 484819 reaction equation
HRID 484819As product
HRID 1068515 reaction equation
HRID 1068515As product
HRID 1068516 reaction equation
HRID 1068516As product
HRID 2164314 reaction equation
HRID 2164314As product

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes

The silanes decomp at elevated temp to liberate hydrogen and deposit a high purity silicon, which leads to some of the principal uses of silanes. /Silanes/

When heated to decomposition it emits toxic fumes of /chlorine/.

Vapor Density6.15 (Air = 1)
Vapor Pressure · 3 items

28.8 [mmHg]

28.8 mm Hg at 20 °C

28.8 [mm Hg] @20 °C

Physicochemical properties

Melting point
0 °C · <0°C
Boiling point
124 °C · 124 °C
Density
1.2 · 1.20
vapor pressure
0.005 · 0.005-1500Pa at 20-25℃
refractive index
1.43 · 1.43
Flash point
37 °C · 37 °C
solubility
Soluble in water
form
clear liquid
color
Colorless to Almost colorless
Specific Gravity
1.195 · 1.195
Viscosity
0.585 mm2/s · 0.585mm2/s
Water Solubility
1000 g/L · 1000g/L at 20℃
Hydrolytic Sensitivity
8 · 8: reacts rapidly with moisture, water, protic solvents
Sensitive
Moisture Sensitive
BRN
1734990 · 1734990
LogP
-1.4 at · -1.4 at 20℃
CAS DataBase Reference
141 · 141-57-1(CAS DataBase Reference)
FDA UNII
16 G85FI4Y · X16G85FI4Y
NIST Chemistry Reference
Silane, trichloropropyl-(141-57-1)
EPA Substance Registry System
Silane, trichloropropyl- (141-57-1)
Symbol(GHS)
2 · GHS02,GHS05,GHS06
Signal word
Danger
Hazard statements
331 · H331-H314-H225-H290
Precautionary statements
501 · P501-P261-P240-P210-P233-P234-P243-P241-P242-P271-P264-P280-P370+P378-P390-P303+P361+P353-P301+P330+P331-P363-P304+P340+P310-P305+P351+P338+P310-P403+P233-P403+P235-P406-P405
Hazard Codes
C
Risk Statements
10 · 10-14-34
Safety Statements
26 · 26-36/37/39-43-45
RIDADR
1816 · UN 1816
WGK Germany
1 · 1
RTECS
5300000 · VV5300000
F
10 · 10
TSCA
TSCA listed
HazardClass
8 · 8
PackingGroup
II
HS Code
2931900090 · 2931900090
Hazardous Substances Data
141 · 141-57-1(Hazardous Substances Data)
REACH Registrations
Active
Fire Potential · 4 items

Flammable liquid.

A dangerous fire hazard when exposed to heat or flame.

Self-ignites in air. With a little ammonia, it forms a self-igniting product. /Chlorosilanes/

Certain strong corrosives may, on contact with organic matter or other chemicals, cause fire ... /Corrosive substances/

Health Hazards · 2 items

Excerpt from ERG Guide 155 [Substances - Toxic and/or Corrosive (Flammable / Water-Sensitive)]:

· TOXIC and/or CORROSIVE; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death.

Hazards Summary · 1 item

Produces hydrogen chloride when spilled in water; [ERG 2016] Can cause severe burns to skin and eyes; [HSDB] Reacts violently with water or moisture producing heat, hydrogen, and hydrogen chloride gas; Corrosive to tissue; [CAMEO] Reacts with water; A corrosive substance that can cause injury to the skin, eyes, and respiratory tract; [MSDSonline]

DOT ID and Guide1816 155
Reactive GroupChlorosilanes
RCRA RequirementsD002; A solid waste containing propyltrichlorosilane may become characterized as a hazardous waste when subjected to testing for corrosivity as stipulated in 40 CFR 261.21, and if so characterized, must be managed as a hazardous waste.
Reactivity AlertsHighly Flammable
Reactivity ProfilePROPYLTRICHLOROSILANE reacts violently with water, steam, moist air, alcohols, acetone, and light metals with generation of heat and flammable (H2) and corrosive (HCl) gases.

Safety & protection

Fire FightingExcerpt from ERG Guide 155 [Substances - Toxic and/or Corrosive (Flammable / Water-Sensitive)]:
Accidental Release Measures · 2 items

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 2 items

Excerpt from ERG Guide 155 [Substances - Toxic and/or Corrosive (Flammable / Water-Sensitive)]:

General First Aid:

Firefighting HazardsWill react with water or steam to produce toxic and corrosive fumes.
Exposure Control and Personal Protection · 2 items

· Wear positive pressure self-contained breathing apparatus (SCBA).

TIH (Toxic Inhalation Hazard) - Term used to describe gases and volatile liquids that are toxic when inhaled. Some are TIH materials themselves, e.g., chlorine, and some release TIH gases when spilled in water, e.g., chlorosilanes. [ERG 2016].

Fire Fighting Procedures · 3 items

If material on fire or involved in fire: use dry chemical, dry sand, or carbon dioxide; do not use water on material itself; if large quantities of combustibles are involved, use water in flooding quantities as spray and fog; use water spray to knock down vapors; cool all affected containers with flooding quantities of water; apply water from as far a distance as possible.

Use water spray, dry chemical, or carbon dioxide to extinguish small fires. Use water to keep fire-exposed containers cool. Approach fire from upwind to avoid hazardous vapors and toxic decomposition products.

Wear special protective clothing and positive pressure self-contained breathing apparatus.

Storage Conditions · 3 items

SRP: Operations involving entry into tanks or closed vessels, and emergency situations, require consideration of potentially oxygen deficient, or "immediately dangerous to life and health" IDLH environments. This may necessitate use of a self-contained breathing apparatus (SCBA), or a positive pressure supplied air respirator.

Store in a cool, dry, well-ventilated location. Separate from acids, alkalies, oxidizing materials, and water. Outside or detached storage is preferred.

All containers, pipes, apparatus, installations, and structures used for the manufacture, storage, transport, or use of these substances must be of material resistant to corrosive substances or be protected by suitable coatings ... All containers or receptacles should be clearly labelled to indicate their contents and should bear the danger symbol for corrosives. /Corrosive substances/

Cleanup Methods · 5 items

SRP: Wastewater from contaminant suppression, cleaning of protective clothing/equipment, or contaminated sites should be contained and evaluated for subject chemical or decomposition product concentrations. Concentrations shall be lower than applicable environmental discharge or disposal criteria. Alternatively, pretreatment and/or discharge to a permitted wastewater treatment facility is acceptable only after review by the governing authority and assurance that "pass through" violations will not occur. Due consideration shall be given to remediation worker exposure (inhalation, dermal and ingestion) as well as fate during treatment, transfer and disposal. If it is not practicable to manage the chemical in this fashion, it must be evaluated in accordance with EPA 40 CFR Part 261, specifically Subpart B, in order to determine the appropriate local, state and federal requirements for disposal.

Eliminate all ignition sources. Stop or control the leak, if this can be done without undue risk. Use water spray to cool and disperse vapors and protect personnel. Spills can be neutralized by flushing with large quantities of water followed by treatment with sodium bicarbonate. Control runoff and isolate discharged material for proper disposal.

Environmental considerations - land spill: dig a pit, pond, lagoon, holding area to contain liquid or solid material /SRP: If time permits, pits, ponds, lagoons, soak holes, or holding areas should be sealed with an impermeable flexible membrane liner/; dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete; absorb bulk liquid with fly ash, cement powder, or commercial sorbents.

Environmental considerations - water spill: use natural barriers or oil spill control booms to limit spill travel; remove trapped material with suction hoses.

Environmental considerations - air spill: apply water spray or mist to knock down vapors.

Nonfire Spill ResponseExcerpt from ERG Guide 155 [Substances - Toxic and/or Corrosive (Flammable / Water-Sensitive)]:
Disposal Methods · 1 item

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal and plant life; and conformance with environmental and public health regulations.

Preventive Measures · 5 items

SRP: The scientific literature for the use of contact lenses by industrial workers is inconsistent. The benefits or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.

SRP: Contaminated protective clothing should be segregated in a manner that results in no direct personal contact by personnel who handle, dispose of, or clean the clothing. Quality assurance procedures to confirm the efficacy of the cleaning procedures should be implemented prior to the decontaminated protective clothing being returned for reuse by the workers. Contaminated clothing (including shoes/socks) should not be taken home at end of shift, but should remain at employee's place of work for cleaning.

SRP: Local exhaust ventilation should be applied wherever there is an incidence of point source emissions or dispersion of regulated contaminants in the work area. Ventilation control of the contaminant as close to its point of generation is both the most economical and safest method to minimize personnel exposure to airborne contaminants. Ensure that the local ventilation moves the contaminant away from the worker.

If material not on fire and not involved in fire: keep sparks, flames, and othr sources of ignition away; keep material out of water sources and sewers; build dikes to contain flow as necessary; use water spray to knock down vapors; do not use water on material itself; neutralize spilled material with crushed limestone soda ash, or lime.

For more Preventive Measures (Complete) data for Trichloropropylsilane (6 total), please visit the HSDB record page.

Isolation and Evacuation · 4 items

Excerpt from ERG Guide 155 [Substances - Toxic and/or Corrosive (Flammable / Water-Sensitive)]:

Immediate precautionary measure

When spilled in water

When spilled in water

Toxicology

Adverse EffectsDermatotoxin - Skin burns.
Human Toxicity Excerpts · 5 items

/SIGNS AND SYMPTOMS/ Acute inhalation exposure may result in sneezing, choking, laryngitis, dyspnea (shortness of breath), respiratory tract irritation, and chest pain. Higher exposure can cause pulmonary edema, a medical emergency that can be delayed for several hours. This can cause death. Bleeding of nose and gums, ulceration of the nasal and oral mucosa, pulmonary edema, chronic bronchitis, and pneumonia may also occur. If the eyes have come in contact with dimethyldichlorosilane, irritation, pain, swelling, corneal erosion, and blindness may result. Dermatitis (red, inflamed skin), severe burns, pain, and shock generally follow dermal exposure. Inhalation irritates mucous membranes. Severe gastrointestinal damage may occur. Vapors cause severe eye and lung injury. Upon short contact, second and third degree burns may occur. Signs and symptoms of acute ingestion of dimethyldichlorosilane may be severe and include increased salivation, intense thirst, difficulty swallowing, chills, pain, and shock. Oral, esophageal, and stomach burns are common. /Dimethyldichlorosilane/

/SIGNS AND SYMPTOMS/ Inhalation irritates mucous membranes. Contact with liq causes severe burns of eyes and skin ... Vapors cause severe irritation of eyes and throat and can cause eye and lung injury. They cannot be tolerated even at low concn. Causes second- and third-degree burns on short contact ...

/SIGNS AND SYMPTOMS/ Causes severe eye and skin burns. Serious health hazard. May be harmful if inhaled. Irritating to eye, skin, and respiratory system. /Dimethylchlorosilane/

/SIGNS AND SYMPTOMS/ Causes severe eye and skin burns.

For more Human Toxicity Excerpts (Complete) data for Trichloropropylsilane (9 total), please visit the HSDB record page.

Non-Human Toxicity Excerpts · 5 items

/LABORATORY ANIMALS: Acute Exposure/ /When instilled/ ... into eye of rabbit all these compounds /methyl and ethyl chlorosilanes/, even at very low doses (0.05 mL), caused severe burns of cornea and eyelids ... /When applied/ to skin of rabbit the region attacked by chlorosilanes blanches and blisters appear; action is more marked the damper the surface of the skin. /Chlorosilanes/

/OTHER TOXICITY INFORMATION/ Hydrogen chloride AEGL values were adopted as AEGL values for monochlorosilanes, AEGL values for dichlorosilanes were derived by dividing the hydrogen chloride AEGL values by a molar adjustment factor of two, AEGL values for the title trichlorosilanes were derived by dividing the hydrogen chloride AEGL values by a molar adjustment factor of three, and AEGL values for tetrachlorosilane were derived by dividing the hydrogen chloride AEGL values by a molar adjustment factor of four.

/OTHER TOXICITY INFORMATION/ All these compounds, even in very low doses ... caused severe burns of cornea and eyelids ... /After/ application to the skin of the rabbit the region attacked by chlorosilanes blanches and then blisters appear ... /Chlorosilanes/

/OTHER TOXICITY INFORMATION/ Although chemical-specific data are not available for many of the ... chlorosilanes, acute inhalation data from rat studies are available for structurally-similar chlorosilanes (n-propyltrichlorosilane, methyltrichlorosilane, vinyltrichlorosilane, ethyltrichlorosilane, methylvinyldichlorosilane, methyldichlorosilane, dimethyldichlorosilane, dimethylchlorosilane, trimethylchlorosilane, and tetrachlorosilane). These data suggest that the acute toxicity of chlorosilanes is due to the hydrogen chloride hydrolysis product; acute toxicity of the chlorosilanes is both qualitatively (based on clinical signs) and quantitatively (based on molar equivalents of hydrogen chloride) similar to that of HCl. Complete hydrolysis of one mole of a monochlorosilane would yield a maximum of one mole of hydrogen chloride. Complete hydrolysis of a dichlorosilane would yield a maximum of two moles of hydrogen chloride, complete hydrolysis of a trichlorosilane would yield a maximum of three moles of hydrogen chloride, and complete hydrolysis of tetrachlorosilane would yield a maximum of four moles of hydrogen chloride. /Chorosilanes/

/OTHER TOXICITY INFORMATION/ /Via inhalation/ they have a corrosive action when brought into contact with mucous membranes. /Chlorosilanes/

Environmental Abiotic Degradation · 1 item

Silane compounds decompose upon contact with water or steam to produce heat and toxic and corrosive fumes of hydrogen chloride. Silane ignites spontaneously in air(1,2). With a little ammonia, it forms a self-igniting product(1). /Chlorosilanes/

Probable Routes of Human ExposureAccording to the 2006 TSCA Inventory Update Report, the number of persons reasonably likely to be exposed in the industrial manufacturing, processing, and use for trichloropropylsilane is 100-999; the data may be greatly underestimated(1).
Environmental Fate/Exposure Summary · 1 item

Chlorosilane compounds' production and use as intermediates for silicone products may result in their release to the environment through various waste streams. However, these compounds decompose to release hydrogen chloride upon contact with water or steam. Therefore, volatilization, biodegradation, and bioconcentration are not expected to be important environmental fate processes. /Chlorosilanes/ (SRC)

Antidote and Emergency Treatment · 3 items

Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Silane, Chlorosilane, and Related Compounds/

Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Anticipate seizures and treat if necessary ... . Monitor for shock and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool. Administer activated charcoal (refer to ingestion protocol in Section Three ... . Cover skin burns with sterile dressings after decontamination ... . /Silane, Chlorosilane, and Related Compounds/

Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious, has severe pulmonary edema, or is in severe respiratory distress. Early intubation at the first sign of upper airway obstruction may be necessary. Positive-pressure ventilation techniques with a bag-valve-mask device may be beneficial. Consider drug therapy for pulmonary edema ... . Monitor cardiac rhythm and treat arrhythmias if necessary ... . Start IV administration of D5W /SRP: "To keep open", minimal flow rate/. Use 0.9% saline (NS) or lactated Ringer's (LR) if signs of hypovolemia are present. For hypotension with signs of hypovolemia, administer fluid cautiously. Consider vasopressors if patient is hypotensive with a normal fluid volume. Watch for signs of fluid overload ... . Treat seizures with diazepam or lorazepam ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Silane, Chlorosilane, and related compounds/

Non-Human Toxicity ValuesLC50 Rat inhalation 1352 ppm for 1 hr (95% confidence limits 1254-1455 ppm)

Regulatory information

RCRA RequirementsD002; A solid waste containing propyltrichlorosilane may become characterized as a hazardous waste when subjected to testing for corrosivity as stipulated in 40 CFR 261.21, and if so characterized, must be managed as a hazardous waste.
DHS Chemicals of Interest (COI) · 4 items

Propyltrichlorosilane

A Commercial Grade

A Placarded Amount

Chemical or material that can be mixed with readily available materials.

Safety data

F
10
wgk
1
tsca
TSCA listed
rtecs
VV5300000
ridadr
UN 1816
hs_code
2931900090
risk_code
10-14-34
Signal word
Danger
Symbol(GHS)
GHS02,GHS05,GHS06
hazard_code
C
safety_code
26-36/37/39-43-45
hazard_class
8
packing_group
II
Hazard statements
H331-H314-H225-H290
REACH Registrations
Active
Precautionary statements
P501-P261-P240-P210-P233-P234-P243-P241-P242-P271-P264-P280-P370+P378-P390-P303+P361+P353-P301+P330+P331-P363-P304+P340+P310-P305+P351+P338+P310-P403+P233-P403+P235-P406-P405
Hazardous Substances Data
141-57-1(Hazardous Substances Data)
Mercuric thiocyanate3-ChloropropyltrichlorosilaneTrichlorosilaneAllyl chloride

Downstream products

trichloro(2-chloropropyl)silanen-Propyltriacetoxysilanepropene