(1-Bromoethyl)benzene

Density = 1.356

DENSITY:1.3605 @ 20 °C/4 °C /DL/

SPECIFIC OPTICAL ROTATION: +15 @ 14 °C/D; DENSITY: 1.3108 @ 23 DEG /D FORM/

SOL IN ALC & ETHER /DL & D FORMS/

SOL IN BENZENE /DL FORM/

INSOL IN WATER /D FORM/

96 °C

205 °F

94 °C at 16 mm Hg

BP: 202-203 °C @ 760 MM HG /DL/

DECOMP IN HOT WATER /DL FORM/

UV: 1279 (Sadtler Research Laboratories Spectral Collection) /dl form/

Warning

H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]

P261, P264, P264+P265, P271, P280, P302+P352, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 48 reports by companies from 7 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

STORAGE & HANDLING: ...MATERIALS WHICH ARE TOXIC AS STORED OR WHICH...DECOMP INTO TOXIC COMPONENTS DUE TO CONTACT WITH HEAT...SHOULD BE STORED IN COOL, WELL-VENTILATED PLACE, OUT OF DIRECT RAYS OF SUN, AWAY FROM AREAS OF HIGH FIRE HAZARD, &...PERIODICALLY INSPECTED & MONITORED.

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

SRP: Local exhaust ventilation should be applied wherever there is an incidence of point source emissions or dispersion of regulated contaminants in the work area. Ventilation control of the contaminant as close to its point of generation is both the most economical and safest method to minimize personnel exposure to airborne contaminants.

TESTS OF VAPOR ON MEN HAVE SHOWN THAT 0.0035 MG/L OF AIR IS ALMOST IMMEDIATELY INCAPACITATING... /BENZYL BROMIDE/

LACRIMATORY LIQ. ... INTENSELY IRRITATING TO SKIN, EYES, MUCOUS MEMBRANES. LARGE DOSES CAUSE CNS DEPRESSION. /BENZYL BROMIDE/