Tiglic acid
13201-46-2C/C=C(\C)C(=O)OUIERETOOQGIECD-ONEGZZNKSA-NTiglic acid, [corrosive solid] appears as a white lustrous flaked solid with a fruity or spicy odor. About the same density as water and slightly soluble in water. May burn if heated to high temperatures. May severely irritate skin, eyes, lungs or mucous membranes.
13201-46-2、80-59-1DTXSID808832570.972
Density: 0.9641 g/cu cm at 76 °C
EU Flavoring substances
EU Flavoring substances
Triclinic plates, rods from water
Thick, syrupy liquid or colorless crystals
Tablets
Sparingly soluble in cold water; freely soluble in hot water. Soluble in alcohol, ether.
Sicherheitsangaben dienen nur zur Orientierung und ersetzen weder das Sicherheitsdatenblatt (SDB) des Lieferanten noch geltende Vorschriften oder eine fachliche Bewertung.
Warning
H315 (97.1%): Causes skin irritation [Warning Skin corrosion/irritation]
P264, P264+P265, P280, P302+P352, P305+P351+P338, P321, P332+P317, P337+P317, and P362+P364 (click each P-code to see the statement)
Aggregated GHS information provided per 1614 reports by companies from 7 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Chemical: 2-Butenoic acid, 2-methyl-, (2E)-
Commission Regulation (EC) No 1565/2000 (Repealed by Com. Implementing Reg. (EU) No 872/2012)
Regulation (EC) No 1831/2003 (amended)
2-Butenoic acid, 2-methyl-, (2E)-: Does not have an individual approval but may be used under an appropriate group standard
TIGLIC ACID is a carboxylic acid. Carboxylic acids donate hydrogen ions if a base is present to accept them. They react in this way with all bases, both organic (for example, the amines) and inorganic. Their reactions with bases, called "neutralizations", are accompanied by the evolution of substantial amounts of heat. Neutralization between an acid and a base produces water plus a salt. Carboxylic acids in aqueous solution and liquid or molten carboxylic acids can react with active metals to form gaseous hydrogen and a metal salt. Such reactions occur in principle for solid carboxylic acids as well, but are slow if the solid acid remains dry. Even "insoluble" carboxylic acids may absorb enough water from the air and dissolve sufficiently in it to corrode or dissolve iron, steel, and aluminum parts and containers. Carboxylic acids, like other acids, react with cyanide salts to generate gaseous hydrogen cyanide. The reaction is slower for dry, solid carboxylic acids. Insoluble carboxylic acids react with solutions of cyanides to cause the release of gaseous hydrogen cyanide. Flammable and/or toxic gases and heat are generated by the reaction of carboxylic acids with diazo compounds, dithiocarbamates, isocyanates, mercaptans, nitrides, and sulfides. Carboxylic acids, especially in aqueous solution, also react with sulfites, nitrites, thiosulfates (to give H2S and SO3), dithionites (SO2), to generate flammable and/or toxic gases and heat. Their reaction with carbonates and bicarbonates generates a harmless gas (carbon dioxide) but still heat. Like other organic compounds, carboxylic acids can be oxidized by strong oxidizing agents and reduced by strong reducing agents. These reactions generate heat. A wide variety of products is possible. Like other acids, carboxylic acids may initiate polymerization reactions; like other acids, they often catalyze (increase the rate of) chemical reactions.
The esters in perfumes and flavoring agents. The free acid as a breaker of emulsions.
Reported uses (ppm): (Flavor and Extract Manufacturers' Association, 1994)
Perfumes, flavors, emulsion breakers.
Flavor enhancer
From croton oil. Also occurs in English chamomile oil.
Synthesized from 2-hydroxy-2-methylbutyronitrile.
Fragrance Ingredients
Flavouring Agent -> FLAVOURING_AGENT -> JECFA Functional Classes
Flavoring Agents -> JECFA Flavorings Index
Flavouring Agent -> FLAVOURING_AGENT -> JECFA Functional Classes
Flavouring Agent -> FLAVOURING_AGENT -> JECFA Functional Classes
Flavouring Agent -> FLAVOURING_AGENT -> JECFA Functional Classes
Beschreibungfrarc.s-2-Methyl-2-butenoic acid has a sweet, warm, spicy odor. May be synthesized from 2-hydroxy-2-methylbutyronitrile.
OccurrenceReported found in celery leaves and stalk, cocoa, mango, dried bonito and Roman chamomile oil
VerwendenTiglic acid is the stable isomer of angelic acid. Tiglic acid was found as glyceride in croton oil, as butyl ester in the oil of the Roman camomile, and as geranyl tiglate in oil of geranium. Tiglic a cid is formed during the charcoaling of maple wood.
CHEMBL52416CHEBI:95921 mg/mL
Slightly soluble in water; insoluble in oils
soluble (in ethanol)
198.5 °C at 760 mm Hg, 95.0-96 °C at 11.5 mm Hg
95.00 to 96.00 °C. @ 12.00 mm Hg
When heated to decomposition it emits toxic fumes of /sulfuric oxides/, /nitrogen oxides/, and /hydrogen chloride./
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide.
62.5-64 °C
Crystals; melting point: 75-76 °C. /Amide/
61 - 65 °C
EXTINGUISHING MEDIA ... Carbon dioxide, dry chemical powder, or appropriate foam. Water spray.
Firefighting Protective Equipment: Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
If material involved in fire: Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.). Use water in flooding quantities as fog. Use foam, dry chemical, or carbon dioxide. Keep run-off water out of sewers and water sources. /Tiglic acid (Corrosive solid, acidic, organic, NOS); Tiglic acid (Corrosive solids, NOS)/
Environmental considerations: Land spill: Dig a pit, pond, lagoon, holding area to contain liquid or solid material. Cover solids with a plastic sheet to prevent dissolving in rain or fire fighting water. Dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete. Neutralize with vinegar or other dilute acid. Absorb bulk liquid with fly ash or cement powder. /SRP: If time permits, pits, ponds, lagoons, soak holes, or holding areas should be sealed with an impermeable flexible membrane liner./ /Tiglic acid (Corrosive solid, acidic, organic, NOS); Tiglic acid (Corrosive solids, NOS)/
Environmental considerations: Water spill: Use natural barriers or oil spill control booms to limit spill travel. Neutralize with dilute acid. /Tiglic acid (Corrosive solid, acidic, organic, NOS); Tiglic acid (Corrosive solids, NOS)/
Sweep up, place in a bag and hold for waste disposal. Avoid raising dust. Ventilate area and wash spill site after material pickup is complete.
SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.
Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Observe all federal, state, and local environmental regulations.
If material not involved in fire: Build dikes to contain flow as necessary. /Tiglic acid (Corrosive solid, acidic, organic, NOS); Tiglic acid (Corrosive solids, NOS)/
Personnel protection: Avoid breathing vapors or dusts. Avoid breathing fumes from burning material. ... Wet spilled material before picking it up. Do not handle broken packages unless wearing appropriate personal protective equipment. /Tiglic acid (Corrosive solid, acidic, organic, NOS); Tiglic acid (Corrosive solids, NOS)/
SRP: Contaminated protective clothing should be segregated in such a manner so that there is no direct personal contact by personnel who handle, dispose, or clean the clothing. Quality assurance to ascertain the completeness of the cleaning procedures should be implemented before the decontaminated protective clothing is returned for reuse by the workers. Contaminated clothing should not be taken home at end of shift, but should remain at employee's place of work for cleaning.
SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.
SRP: When working with strong solutions of acids or bases or other caustic or corrosive materials, always wear a full face mask. When working with caustic or corrosive gases or vapors, a full face mask will not protect the eyes or prevent inhaling the material. A full face respirator is required.
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]:
Personnel protection: ... Wear appropriate chemical protective gloves, boots and goggles. Wear positive pressure self-contained breathing apparatus. /Tiglic acid (Corrosive solid, acidic, organic, NOS); Tiglic acid (Corrosive solids, NOS)/
/SIGNS AND SYMPTOMS/ Symptoms of exposure may include burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting. Inhalation may result in spasm, inflammation and edema of the larynx and bronchi, chemical pneumonitis, and pulmonary edema. Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin.
/ALTERNATIVE and IN VITRO TESTS/ The present study was undertaken to assess the influence of 25 organic acids, which appear in high concentrations in tissues of patients with various organic acidemias, on the proliferation of human peripheral lymphocytes stimulated with concanavalin A (Con A) (a T-cell activator) and pokeweed mitogen (PWM) (predominantly a B-cell activator). Mononuclear cells were cultivated in flat-bottomed 96-well microplates at 37 °C for 96 (Con A) or 144 hr (PWM) in the presence of one mitogen at different concentrations and of one acid at doses ranging from 1 to 5 mM. Control cultures did not contain any acid. Cell reactivity was measured by the incorporation of tritiated thymidine into cellular DNA. ... among the 25 acids tested, aminoadipic (AAD), 2-hydroxy-3-methylvaleric (HMV), 2-ketoisocaproic (KIC), 2-methylbutyric (MBA), propionic (PPA) and tiglic (TIG) acids strongly suppressed lymphocyte DNA synthesis in Con A-supplemented cultures, whereas in cultures stimulated with PWM, 2-ketoisovaleric (KIV) and PPA acids presented the same effect. ...
/LABORATORY ANIMALS: Acute Exposure/ Five-carbon-atom organic acids (C-5 acids) have been administered iv to rabbits with ventriculocisternal perfusion and continuous electroencephalographic recording (EEG). The concentration of the acids in the cerebrospinal fluid (CSF) perfusate have been compared with changes in integrated low-frequency activity in the EEG. The C-5 acids investigated were those accumulating in inborn errors of metabolism, i.e. isovaleric acid, beta-methylcrotonic acid, tiglic acid and alpha-keto- and alpha-hydroxy-isovaleric acid. Their activity was compared with that of valeric acid.... /which/ ... produced coma and pronounced increase in slow-wave electrical activity and these changes paralleled the increase in concentration of the acids in the CSF perfusate. The concentration of beta-methylcrotonic acid and tiglic acid in the CSF perfusate reached values comparable with valeric acid and isovaleric acid but showed less encephalopathic activity. ...It is concluded that all the C-5 acids tested have encephalopathic activity although this is lessened by the presence of either a double bond or an oxygenated functional group.
DefinitionChEBI: A 2-methylbut-2-enoic acid having its double bond in trans-configuration.