Zurück
HuagongsheHuagongshe Chemie-Druckbericht · Nur für Forschungszwecke
HCID 13624Erstellt: 26. Oktober 2026

Benzimidazol-2-ylamin

1H-BENZO[D]IMIDAZOL-2-AMINE · 1H-BENZIMIDAZOL-2-AMINE · 2-AMINO-1H-BENZIMIDAZOLE · usafek-4037 · USAF ek-4037 · 2-AMinobenziMi · BenziMidazoloniMide · 2-aMinobenziMidazde

https://huagongshe.com/de/chemical/13624

Molekülstruktur von Benzimidazol-2-ylamin

Identifikatoren & physikalische Daten

CAS No.934-32-7
SummenformelC7H7N3
Durchschnittliche Molmasse133,15 g/mol
Monoisotopische Masse133,06399722 g/mol
SMILESNc1nc2ccccc2[nH]1
InChIKeyJWYUFVNJZUSCSM-UHFFFAOYSA-N
PubChem CID13624
ChEMBLCHEMBL305513
ChEBICHEBI:27822
EC No.213-280-6
DTXSIDDTXSID1024465
Lokaler NameBenzimidazol-2-ylamin

Chemische & physikalische Eigenschaften

XLogP0,9
Polarare Oberfläche (TPSA)54,7
H-Brücken-Donoren2
H-Brücken-Akzeptoren2
Frei drehbare Bindungen0
Schwere Atome10
Formalladung0
Komplexität126
SpringerMaterials PropertiesFusion temperature
PestizidePesticides -> Fungicides -> Benzimidazole fungicides -> Transformation productsEnvironmental transformation -> Pesticide transformation products (metabolite, successor)Pesticide degradation product
Löslichkeitless than 1 mg/mL at 68 °F (NTP, 1992)>20 [ug/mL] (The mean of the results at pH 7.4)<1g/l slightly solubleSoluble in water (Slightly).
Schmelzpunkt435 °F (NTP, 1992)226-230 °C (lit.)
Physical DescriptionPlates (in water)white powder. (NTP, 1992)
Ionization EfficiencyPositive3.612.7Agilent XCTElectrospray ionizationformic acid (5.3nM)
Collision Cross Section126.2 Ų [M+H]+ [CCS Type: DTBuffer gas: N2Ionization: APCI+Dataset: TOXCASTSource Identifier: DTXSID1024465]
Siedepunkt235.67°C (rough estimate)
Dichte1.1873 (rough estimate)
Brechungsindex1.5341 (estimate)
LagerbedingungenKeep in dark place,Sealed in dry,Room Temperature
AggregatzustandCrystalline Powder, Crystals or Flakes
pKa (Säurekonstante)11.41±0.10(Predicted)
FarbeYellow to beige or light brown
BRN116525
Hauptanwendungenagricultureenvironmental
InChI1S/C7H7N3/c8-7-9-5-3-1-2-4-6(5)10-7/h1-4H,(H3,8,9,10)
InChIKeyJWYUFVNJZUSCSM-UHFFFAOYSA-N
SMILESNc1nc2ccccc2[nH]1
CAS Datenbank934-32-7(CAS DataBase Reference)
NIST chemische Informationen2-Aminobenzimidazole(934-32-7)
EPA chemische Informationen2-Aminobenzimidazole (934-32-7)

Sicherheit & Vorschriften

GHS-EinstufungWarningH302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]P261, P264, P264+P265, P270, P271, P272, P280, P301+P317, P302+P352, P304+P340, P305+P351+P338, P319, P321, P330, P332+P317, P333+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement)Aggregated GHS information provided per 111 reports by companies from 11 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Regulatorische InformationenChemical: 1H-Benzimidazol-2-amineCommission Regulation No 844/20121H-Benzimidazol-2-amine: Does not have an individual approval but may be used under an appropriate group standard
BrandgefahrenFlash point data for this chemical are not availablehowever, it is probably combustible. (NTP, 1992)
GesundheitsgefahrenACUTE/CHRONIC HAZARDS: When heated to decomposition this compound emits toxic fumes of nitrogen oxides. (NTP, 1992)
Reaktive GruppeAmines, Phosphines, and Pyridines
Reactivity Profile2-AMINOBENZIMIDAZOLE neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. May generate hydrogen, a flammable gas, in combination with strong reducing agents such as hydrides.
Air and Water ReactionsInsoluble in water.
Hazard Classes and CategoriesAcute Tox. 4 (100%)
BrandbekämpfungFires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
Erste HilfeEYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
Freisetung ohne BrandSMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
Personal Protective Equipment (PPE)RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)
USGS Health-Based Screening Levels for Evaluating Water-Quality2-AminobenzimidazolePesticide degradation productSmith, C.D. and Nowell, L.H., 2024. Health-Based Screening Levels for evaluating water-quality data (3rd ed.). DOI:10.5066/F71C1TWP
Wassergefährdungsklasse (WGK)3
TSCA-Inventar-StatusTSCA listed
Zollcode29339990
RTECS-Nr.DD5775000
R-Sätze (R)22-36/37/38-43
GefahrensymboleXn
Sicherheitshinweise (S)26-36/37/39-22
Lagerklasse11 - Combustible Solids
GefahrenklasseAcute Tox. 4 Oral

Anwendungen & Verwendung

Beschreibung

Das 2-Aminobenzimidazol bildet hellbraune, in Wasser unlösliche Blättchen. Die Verbindung besitzt nur wissenschaftliches Interesse.

Herstellung & Synthese

synthetische

Synthesis of 2-aminobenzimidazole: Cyanogen bromide (3.5 g., 0.034 mole) was added in small portions, with shaking, to a suspension of o-phenylenediamine (4.2 g. , 0.34 mole) in water (40 ml), the exothermic reaction mixture was cooled to room temperature and it was stirred for 36hrs. The solution was filtered after standing overnight. Sodium hydroxide (1.4 g., 0.034 mole) in 30 ml of water was then added and the solution was evaporated. The solid thus obtained was filtered and recrystalized from water. Yield 85%, m.p. 228 - 230°C

2-Aminobenzimidazole|Huagongshe