StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Verbindung

Vinyl sulfoxide

HCID 14217
Neue Reaktion
Drucken

Daten werden ergänzt – lade die Seite später neu, um den aktuellen Stand zu sehen

GrundinformationenNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
TeilstruktursucheÄhnliche Strukturen suchen

Grundinformationen

CAS
1115-15-7
Standard-SMILES
C=CS(=O)C=C
InChIKey
HQSMEHLVLOGBCK-UHFFFAOYSA-N
Summenformel
C4.H6.O.S
Durchschnittliche Molmasse
102,16 g/mol
Monoisotopische Masse
102,01393598

Namen und Bezeichner

Bevorzugter Name
Vinyl sulfoxide
IUPAC
1-ethenylsulfinylethene
Englischer Name
Divinylsulfoxide
Summenformel
C4H6OS
Molmasse
102.15

Namen und Synonyme

Divinyl sulfoxideVINYL SULFOXIDE1115-15-71-ethenylsulfinyletheneEthene, 1,1-sulfinylbis-HSDB 2029TL 907Ethene, 1,1'-sulfinylbis-BRN 10712254W5026ZW8GTL-907VINYL SULFOXIDE [HSDB]
Weitere Namen anzeigen
vinylsulfoxideVINYLSULPHOXIDEDIVINYLSULPHOXIDE1,1-sulfinylbis-ethen1,1'-Sulfinylbisethene2,3'-Dithiodipropionic acid
3-01-00-01869 (Beilstein Handbook Reference)Ethene, 1,1sulfinylbisRefChem:901931621-313-4InChI=1/C4H6OS/c1-3-6(5)4-2/h3-4H,1-2HDIVINYLSULFOXIDE(Ethenesulfinyl)etheneUNII-4W5026ZW8G

Datenbank-Bezeichner

CAS
1115-15-7
PubChem CID
14217
DTXSID
DTXSID50912184
UNII
4W5026ZW8G
EC Number
621-313-4
Nikkaji
J49.640E

Eigenschaften

Berechnete StruktureigenschaftenWird ergänzt

XLogP
0,6
Polarare Oberfläche (TPSA)
36,3 Ų
H-Brücken-Donoren
0
H-Brücken-Akzeptoren
2
Frei drehbare Bindungen
2
Schwere Atome
6
Formalladung
0
Komplexität
75,5

Experimentelle und physikochemische Eigenschaften

Chemical ClassesOther Classes -> Sulfur Compounds
SpringerMaterials PropertiesSchoenflies notation
Density1.079 @ 20°C
DecompositionWhen heated to decomp ... emits toxic fumes of /sulfur oxides/.
Vapor Pressure · 2 Einträge

1.6 [mmHg]

1.6 [mm Hg] @25 °C

Physical DescriptionClear faintly yellow-green liquid; [Aldrich MSDS]

Physikochemische Eigenschaften

Siedepunkt
161.5 °C · 161.5°C (rough estimate)
Dichte
1.079 g/mL · 1.079 g/mL at 20 °C(lit.)
Brechungsindex
20 · n20/D 1.514
Henry's Law Constant
2.5 · 2.5×101 mol/(m3Pa) at 25℃, HSDB (2015)

Sicherheit und Regulatorisches

Sicherheitsangaben dienen nur zur Orientierung und ersetzen weder das Sicherheitsdatenblatt (SDB) des Lieferanten noch geltende Vorschriften oder eine fachliche Bewertung.

GHS-Klassifizierung

GHS Classification · 4 Einträge

Warning

H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]

P261, P264, P264+P265, P271, P280, P302+P352, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 38 reports by companies from 1 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Gefahrenhinweise

Hazards SummaryAn irritant; May be harmful if inhaled or swallowed; [Aldrich MSDS]
Hazard Classes and CategoriesSkin Irrit. 2 (100%)

Sicherheit und Schutzausrüstung

Disposal Methods · 1 Eintrag

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

Protective Action Criteria (PAC) · 3 Einträge

0.40 [mg/m3]

4.4 [mg/m3]

26 [mg/m3]

Toxikologische Informationen

Environmental Fate · 3 Einträge

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 16(SRC), determined from a structure estimation method(2), indicates that vinyl sulfoxide is expected to have very high mobility in soil(SRC). Under anaerobic conditions in soil, vinyl sulfoxide may be microbially reduced to the sulfide(5). Volatilization of vinyl sulfoxide from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 3.9X10-7 atm-cu m/mole(SRC), using a fragment constant estimation method(3). The potential for volatilization of vinyl sulfoxide from dry soil surfaces may exist based upon an estimated vapor pressure of 1.6 mm Hg(SRC), determined from a fragment constant method(4).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 16(SRC), determined from a structure estimation method(2) and a regression-derived equation(3), indicates that vinyl sulfoxide is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 3.9X10-7 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). Under anaerobic conditions in sediment, vinyl sulfoxide may be microbially reduced to the sulfide(7). According to a classification scheme(5), an estimated BCF of 3(SRC), from an estimated log Kow(2) and a regression-derived equation(6), suggests the potential for bioconcentration in aquatic organisms is low.

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), vinyl sulfoxide, which has an estimated vapor pressure of 1.6 mm Hg at 25 °C(SRC), determined from a fragment constant method(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase vinyl sulfoxide is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals and ozone molecules(SRC); the half-lives for these reactions in air are estimated to be 3 hours and 3 days, respectively(SRC), calculated from their rate constants of 1.1X10-10 and 3.5X10-18 cu cm/molecule-sec at 25 °C(SRC), respectively, determined using structure estimation methods(3).

Soil Adsorption/Mobility · 1 Eintrag

Using a structure estimation method based on molecular connectivity indices(1), the Koc for vinyl sulfoxide can be estimated to be 16(SRC). According to a classification scheme(2), this estimated Koc value suggests that vinyl sulfoxide is expected to have very high mobility in soil.

Artificial Pollution Sources · 1 Eintrag

The oxidation of mustard gas can result in the formation of mustard sulfoxide; the sulfoxide can further react forming vinyl sulfoxide(1). Therefore, vinyl sulfoxide may be formed during the chemical decontamination of mustard gas(1) and released during this process to the environment through various waste streams(SRC).

Environmental BiodegradationUnder anaerobic conditions in soil or sediment, vinyl sulfoxide may be microbially reduced to the sulfide(1).
Environmental Bioconcentration · 1 Eintrag

An estimated BCF of 3 was calculated for vinyl sulfoxide(SRC), using an estimated log Kow of -0.5(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low.

Volatilization from Water/Soil · 1 Eintrag

The Henry's Law constant for vinyl sulfoxide is estimated as 3.9X10-7 atm-cu m/mole(SRC) using a fragment constant estimation method(1). This Henry's Law constant indicates that vinyl sulfoxide is expected to be essentially nonvolatile from water surfaces(2). Vinyl sulfoxide's Henry's Law constant(1) indicates that volatilization from moist soil surfaces is not expected(SRC). The potential for volatilization of vinyl sulfoxide from dry soil surfaces may exist(SRC) based upon an estimated vapor pressure of 1.6 mm Hg(SRC), determined from a fragment constant method(3).

Environmental Abiotic Degradation · 1 Eintrag

The rate constant for the vapor-phase reaction of vinyl sulfoxide with photochemically-produced hydroxyl radicals has been estimated as 1.1X10-10 cu cm/molecule-sec at 25 °C(SRC) using a structure estimation method(1). This corresponds to an atmospheric half-life of about 3 hours at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(1). Vinyl sulfoxide may also react with atmospheric ozone with an estimated rate constant for this reaction of 3.5X10-18 cu cm/molecule-sec at 25 °C(SRC) using a structure estimation method(1). This corresponds to an atmospheric half-life of about 3 days at an atmospheric concentration of 7X10+11 ozone molecules per cu cm(1). Vinyl sulfoxide is not expected to undergo hydrolysis in the environment due to the lack of hydrolyzable functional groups(2).

Probable Routes of Human ExposureOccupational exposure to vinyl sulfoxide may occur through inhalation and dermal contact with this compound at locations where mustard gas is decontaminated. (SRC)
Environmental Fate/Exposure Summary · 1 Eintrag

Vinyl sulfoxide may be formed during the chemical decontamination of mustard gas and released during this process to the environment through various waste streams. If released to air, an estimated vapor pressure of 1.6 mm Hg at 25 °C indicates vinyl sulfoxide will exist solely as a vapor in the ambient atmosphere. Vapor-phase vinyl sulfoxide will be degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals and ozone molecules; the half-lives for these reactions in air are estimated to be 3 hours and 3 days, respectively. If released to soil, vinyl sulfoxide is expected to have very high mobility based upon an estimated Koc of 16. Volatilization from moist soil surfaces is not expected to be an important fate process based upon an estimated Henry's Law constant of 3.9X10-7 atm-cu m/mole. Vinyl sulfoxide may volatilize from dry soil surfaces based upon its estimated vapor pressure. Under anaerobic conditions in soil or sediment, vinyl sulfoxide may be microbially reduced to the sulfide. If released into water, vinyl sulfoxide is not expected to adsorb to suspended solids and sediment based upon the estimated Koc. Volatilization from water surfaces is not expected to be an important fate process based upon this compound's estimated Henry's Law constant. An estimated BCF of 3 suggests the potential for bioconcentration in aquatic organisms is low. Occupational exposure to vinyl sulfoxide may occur through inhalation and dermal contact with this compound at locations where mustard gas is decontaminated. (SRC)

Sicherheitsdaten

F
10-23
wgk
3
RTECS-Nr.
YZ9800000
risk_code
36/37/38
hazard_code
Xi
safety_code
26-36/37
Giftige Stoffe Daten
1115-15-7(Hazardous Substances Data)

Chemie und Industrie

Verwendung und Herstellung

UsesCan be formed from the environmental degradation of mustard sulfoxide, an oxidation product of mustard gas; [HSDB]
General Manufacturing InformationThe oxidation of mustard gas can result in the formation of mustard sulfoxide; the sulfoxide can further react forming vinyl sulfoxide(1).

Zugehörige Reaktionen

3
Reaktionsaufzeichnung erstellen
Reaktionsgleichung von HRID 564243
HRID 564243als Edukt
Reaktionsgleichung von HRID 564244
HRID 564244als Edukt
Reaktionsgleichung von HRID 1152673
HRID 1152673als Edukt

Notizen zur Verbindung

Auf dieser SeiteGrundinformationenNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung