StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Verbindung

m-Chlorstyrol

m-Chlorostyrene

HCID 14905
Neue Reaktion
Drucken
GrundinformationenNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
TeilstruktursucheÄhnliche Strukturen suchen

Grundinformationen

CAS
2039-85-2
Standard-SMILES
C=Cc1cccc(Cl)c1
InChIKey
BOVQCIDBZXNFEJ-UHFFFAOYSA-N
Summenformel
C8H7Cl
Durchschnittliche Molmasse
138,59 g/mol
Monoisotopische Masse
138,0236279

Namen und Bezeichner

Bevorzugter Name
m-Chlorostyrene
IUPAC
1-chloro-3-ethenylbenzene
Lokaler Name
m-Chlorstyrol
Englischer Name
3-Chlorostyrene
Summenformel
C8H7Cl
Molmasse
138.59

Namen und Synonyme

3-Chlorostyrene1-Chloro-3-vinylbenzeneM-CHLOROSTYRENEStyrene, 3-chloro-3-chlorophenylethene3-chlorovinylbenzeneUNII-11K8G759HCHSDB 345211K8G759HCEINECS 218-024-7NSC 18602NSC-18602
Weitere Namen anzeigen
CHLOROSTYRENE3-chloro-styrenm-chloro-styrenstyrene,m-chloro-meta-chlorostyreneStyrene, m-chloro-
3-ClC6H4CH=CH23-CHLOROSTYRENE [HSDB]DTXSID80731303chlorostyreneStyrene, mchloroStyrene, 3chloroBenzene, 1chloro3ethenylRefChem:154865

Datenbank-Bezeichner

CAS
2039-85-2
PubChem CID
14905
DTXSID
DTXSID8073130
UNII
11K8G759HC
EC Number
218-024-7
Nikkaji
J2.138E

Eigenschaften

Berechnete Struktureigenschaften

XLogP
3,1
Polarare Oberfläche (TPSA)
0 Ų
H-Brücken-Donoren
0
H-Brücken-Akzeptoren
0
Frei drehbare Bindungen
1
Schwere Atome
9
Formalladung
0
Komplexität
98,7

Experimentelle und physikochemische Eigenschaften

PolymersPlastics & Rubber -> Styrenes
SpringerMaterials Properties13C nuclear magnetic resonance spectrum
Density1.1168 @ 20 °C/4 °C
Solubility · 2 Einträge

Insol in water

Sol in alcohol, ether, acetone

Endocrine DisruptorsPotential endocrine disrupting compound
Boiling Point188.7 °C
Vapor Pressure · 2 Einträge

0.98 [mmHg]

0.981 mm Hg @ 25 °C

Refractive IndexIndex of refraction: 1.5625 @ 20 °C/D
Physical DescriptionColorless liquid; [MSDSonline]

Physikochemische Eigenschaften

Sicherheit und Regulatorisches

Sicherheitsangaben dienen nur zur Orientierung und ersetzen weder das Sicherheitsdatenblatt (SDB) des Lieferanten noch geltende Vorschriften oder eine fachliche Bewertung.

GHS-Klassifizierung

GHS Classification · 4 Einträge

Warning

H302 (88.9%): Harmful if swallowed [Warning Acute toxicity, oral]

P261, P264, P264+P265, P270, P271, P280, P301+P317, P302+P352, P304+P340, P305+P351+P338, P317, P321, P330, P332+P317, P337+P317, P362+P364, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 45 reports by companies from 5 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Gefahrenhinweise

Fire PotentialA flammable liquid. /Chlorostyrene/
Hazards SummaryIrritating to skin and eyes; [HSDB] An irritant; Harmful by inhalation and ingestion; [MSDSonline] See o-Chlorostyrene.
Hazard Classes and CategoriesAcute Tox. 4 (88.9%)
Skin, Eye, and Respiratory IrritationsA skin & eye irritant. /Chlorostyrene/

Sicherheit und Schutzausrüstung

Disposal Methods · 1 Eintrag

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

Preventive Measures · 1 Eintrag

SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.

Chemie und Industrie

Anwendungen

Verwenden3-Chlorostyrene has been identified as a potential candidate for an electron resist to be used in direct device fabrication.

Vor- und nachgelagerte Produkte

Vorgelagerte Rohstoffe

4-(1,1-Dimethylethyl)-1,2-benzoldiol3-Chlor-α-methylbenzylalkoholKaliumhydrogensulfat3-Chlorophenylacetylene

Nachgelagerte Produkte

1-Chloro-3-ethylbenzene3-Chlorophenacyl bromide2,3'-Dichloroacetophenone

Zugehörige Reaktionen

38
Reaktionsaufzeichnung erstellen
Reaktionsgleichung von HRID 47388
HRID 47388als Edukt
Reaktionsgleichung von HRID 392548
HRID 392548als Edukt
Reaktionsgleichung von HRID 392549
HRID 392549als Edukt
Reaktionsgleichung von HRID 470313
HRID 470313als Edukt
Reaktionsgleichung von HRID 513322
HRID 513322als Edukt
Reaktionsgleichung von HRID 513323
HRID 513323als Produkt
Reaktionsgleichung von HRID 561899
HRID 561899als Edukt
Reaktionsgleichung von HRID 562953
HRID 562953als Edukt
ZurückSeite 1 von 5

Notizen zur Verbindung

Auf dieser SeiteGrundinformationenNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
Schmelzpunkt
-23.4 °C · -23.4°C (estimate)
Siedepunkt
87 °C/25 · 87 °C/25 mmHg
Dichte
1.09 · 1.09
Brechungsindex
1.56 · 1.56
Flammpunkt
63 °C · 63 °C
storage temp.
2 · 2-8°C
Aggregatzustand
clear liquid
Farbe
Colorless to Almost colorless
Wasserlöslichkeit
Not miscible or difficult to mix in water. Soluble in ether, and ethanol
BRN
2038489 · 2038489
Henry's Law Constant
4.7 · 4.7×10-3 mol/(m3Pa) at 25℃, HSDB (2015)
InChI
1S/C8H7Cl/c1-2-7-4-3-5-8(9)6-7/h2-6H,1H2
InChIKey
BOVQCIDBZXNFEJ-UHFFFAOYSA-N
SMILES
Clc1cccc(C=C)c1
CAS Datenbank
2039 · 2039-85-2(CAS DataBase Reference)
NIST chemische Informationen
3 · 3-ClC6H4CH=CH2(2039-85-2)
EPA chemische Informationen
m-Chlorostyrene (2039-85-2)

Toxikologische Informationen

Environmental Fate · 3 Einträge

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 840(SRC), determined from a structure estimation method(2), indicates that m-chlorostyrene is expected to have low mobility in soil(SRC). Volatilization of m-chlorostyrene from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 2.1X10-3 atm-cu m/mole(SRC), using a fragment constant estimation method(3). The potential for volatilization of m-chlorostyrene from dry soil surfaces may exist(SRC) based upon a vapor pressure of 0.98 mm Hg(4).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 840(SRC), determined from a structure estimation method(2), indicates that m-chlorostyrene is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon a estimated Henry's Law constant of 2.1X10-3 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 2 hrs and 5 days, respectively(SRC). According to a classification scheme(5), an estimated BCF of 100(SRC), from an estimated log Kow of 3.54(6) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is moderate(SRC).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), m-chlorostyrene, which has a vapor pressure of 0.98 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere(SRC). Vapor-phase m-chlorostyrene is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals and ozone(SRC); the half-lives for these reactions in air are estimated to be 14 and 13 hrs, respectively(SRC), calculated from rate constants of 2.8X10-11 and 2.1X10-17 cu cm/molecule-sec, respectively at 25 °C(SRC) derived using a structure estimation method(3).

Adverse EffectsNeurotoxin - Acute solvent syndrome
Soil Adsorption/Mobility · 1 Eintrag

Using a structure estimation method based on molecular connectivity indices(1), the Koc for m-chlorostyrene can be estimated to be 840(SRC). According to a classification scheme(2), this estimated Koc value suggests that m-chlorostyrene is expected to have low mobility in soil(SRC).

Human Toxicity ExcerptsA skin & eye irritant. /Chlorostyrene/
Environmental BiodegradationData regarding the biodegradation of m-chlorostyrene in either soil or aquatic systems were not available. (SRC)
Environmental Bioconcentration · 1 Eintrag

An estimated BCF of 100 was calculated for m-chlorostyrene(SRC), using an estimated log Kow of 3.54(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is moderate(SRC).

Volatilization from Water/Soil · 1 Eintrag

The Henry's Law constant for m-chlorostyrene is estimated as 2.1X10-3 atm-cu m/mole(SRC) using a fragment constant estimation method(1). This Henry's Law constant indicates that m-chlorostyrene is expected to volatilize rapidly from water surfaces(2). Based on this Henry's Law constant, the volatilization half-life from a model river (1 m deep, flowing 1 m/sec, wind velocity of 3 m/sec)(2) is estimated as 2 hrs(SRC). The volatilization half-life from a model lake (1 m deep, flowing 0.05 m/sec, wind velocity of 0.5 m/sec)(2) is estimated as 5 days(SRC). m-Chlorostyrene's Henry's Law constant indicates that volatilization from moist soil surfaces may occur(SRC). The potential for volatilization of m-chlorostyrene from dry soil surfaces may exist(SRC) based upon a vapor pressure of 0.98 mm Hg(3).

Environmental Abiotic Degradation · 1 Eintrag

The rate constant for the vapor-phase reaction of m-chlorostyrene with photochemically-produced hydroxyl radicals has been estimated as 2.8X10-11 cu cm/molecule-sec at 25 °C(SRC) using a structure estimation method(1). This corresponds to an atmospheric half-life of about 14 hrs at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(1). The rate constant for the vapor-phase reaction of m-chlorostyrene with ozone has been estimated as 2.1X10-17 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(1). This corresponds to an atmospheric half-life of about 13 hrs at an atmospheric concentration of 7X10+11 ozone molecules per cu cm(2). m-Chlorostyrene is not expected to undergo hydrolysis in the environment due to the lack of hydrolyzable functional groups(3).

Probable Routes of Human ExposureOccupational exposure to m-chlorostyrene may occur through inhalation and dermal contact with this compound at workplaces where m-chlorostyrene is produced or used. (SRC)
Environmental Fate/Exposure Summary · 1 Eintrag

Information regarding the production and use of m-chlorostyrene was not available. If released to air, a vapor pressure of 0.98 mm Hg at 25 °C indicates m-chlorostyrene will exist solely as a vapor in the ambient atmosphere. Vapor-phase m-chlorostyrene will be degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals and ozone; the half-lives for these reactions in air are estimated to be 14 and 13 hrs, respectively. If released to soil, m-chlorostyrene is expected to have low mobility based upon an estimated Koc of 840. Volatilization from moist soil surfaces is expected to be an important fate process based upon an estimated Henry's Law constant of 2.1X10-3 atm-cu m/mole. m-Chlorostyrene may volatilize from dry soil surfaces based upon its vapor pressure. If released into water, m-chlorostyrene is expected to adsorb to suspended solids and sediment based upon the estimated Koc. Volatilization from water surfaces is expected to be an important fate process based upon this compound's estimated Henry's Law constant. Estimated volatilization half-lives for a model river and model lake are 2 hrs and 5 days, respectively. An estimated BCF of 100 suggests the potential for bioconcentration in aquatic organisms is moderate. Hydrolysis is not expected to occur due to the lack of hydrolyzable functional groups. Occupational exposure to m-chlorostyrene may occur through inhalation and dermal contact with this compound at workplaces where m-chlorostyrene is produced or used. (SRC)

Antidote and Emergency Treatment · 4 Einträge

Basic treatment: Establish a patent airway. Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if needed. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Monitor for shock and treat if necessary ... . Anticipate seizures and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with normal saline during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool ... . Cover skin burns with dry sterile dressings after decontamination ... . /Poison A and B/

Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious, has severe pulmonary edema, or is in respiratory arrest. Positive pressure ventilation techniques with a bag valve mask device may be beneficial. Monitor cardiac rhythm and treat arrhythmias as necessary ... . Start an IV with D5W /SRP: "To keep open", minimal flow rate/. Use lactated Ringer's if signs of hypovolemia are present. Watch for signs of fluid overload. Consider drug therapy for pulmonary edema ... . For hypotension with signs of hypovolemia, administer fluid cautiously. Watch for signs of fluid overload ... . Treat seizures with diazepam (Valium) ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Poison A and B/

Basic treatment: Establish a patent airway. Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Monitor for shock and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with normal saline during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool. Administer activated charcoal ... . /Aromatic hydrocarbons and related compounds/

Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious or in respiratory arrest. Positive pressure ventilation techniques with a bag valve mask device may be beneficial. Monitor cardiac rhythm and treat arrhythmias if necessary ... Start an IV with D5W /SRP: "To keep open", minimal flow rate/. Use lactated Ringer's if signs of hypovolemia are present. Watch for signs of fluid overload. Consider drug therapy for pulmonary edema ... . Treat seizures with diazepam (Valium) ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Aromatic hydrocarbons and related compounds/

Non-Human Toxicity Values · 5 Einträge

Irritant dose rabbit dermal 10 mg/24 hr /Chlorostyrene/

Irritant dose rabbit ocular 500 mg /Chlorostyrene/

LD50 Rat oral 5200 mg/kg /Chlorostyrene/

LD50 Rabbit percutaneous 20 g/kg /Chlorostyrene/

For more Non-Human Toxicity Values (Complete) data for M-CHLOROSTYRENE (6 total), please visit the HSDB record page.

Sicherheitsdaten

wgk
3
ridadr
1993
hs_code
2903999090
risk_code
20/22-36/37/38
hazard_code
Xn,Xi
safety_code
36-37/39-26-24/25
hazard_class
IRRITANT
packing_group
III
Speicherklasse
10 - Combustible liquids
Giftige Stoffe Daten
2039-85-2(Hazardous Substances Data)
Hazard Classifications
Acute Tox. 4 InhalationAcute Tox. 4 Oral