1-Methylcyclopentyl methacrylate

Beschreibung1-Methylcyclopentyl methacrylate, also known as Methacrylic Acid 1-Methylcyclopentyl Ester, is a organic compound. It is commonly used as the Photoresist monomer. Photoresist (photo reactive materials) is a light-sensitive material used in several processes, such as photolithography and photoengraving, to form a patterned coating on a surface. Lithographic techniques such as deep X-ray lithography (DXRL), X-ray lithography (XRL), deep ultraviolet lithography (DUVL) and ultraviolet lithography (UVL) rely on this material[1].

synthetischeThe preparation of 1-Methylcyclopentyl methacrylate is as follows:Add 1-methylcyclopentanol (730g, 7.29mol), dichloromethane (5100g), triethylamine (1819g, 17.98mol), 4-dimethylaminopyridine (8.9g, 0.0728mol) to the 10L four-necked flask Stirring and cooling with phenothiazine (7.3g) were started, and methacryloyl chloride (1143g, 10.93mol) was added dropwise at a temperature of 0 to 5℃., and the temperature was kept for 2h after the dropwise addition. (raw material≦2.0%).Water (2000g) was added to quench, and the temperature was controlled not to exceed 20℃. The organic phase was washed twice with 5% hydrochloric acid (2000g*2), twice with 5% aqueous sodium hydroxide solution (2000g*2), and twice with water (2000g*2), the organic phase was dried by adding anhydrous sodium sulfate, and spun. The solvent was evaporated and concentrated to obtain 1268g of crude product. The crude product was distilled under reduced pressure (negative pressure: 1mmHg column, external temperature: 60-70℃., main fraction: 35-40℃.) to obtain 921g of product.