Zurück
HuagongsheHuagongshe Chemie-Druckbericht · Nur für Forschungszwecke
HCID 16402Erstellt: 26. Oktober 2026

1,6-Diaminohexan

HMDA · HEXAMETHYLENEDIAMINE · 1,6-HEXANEDIAMINE · 1,6-Hexamethylenediamine · 1,6-DIAMINOHEXANE · HEXANEDIAMINE · Hexamethylendiamine · Hexylenediamine

https://huagongshe.com/de/chemical/16402

Molekülstruktur von 1,6-Diaminohexan

Identifikatoren & physikalische Daten

CAS No.124-09-4
SummenformelC6H16N2
Durchschnittliche Molmasse116,2 g/mol
Monoisotopische Masse116,13134851 g/mol
SMILESNCCCCCCN
InChIKeyNAQMVNRVTILPCV-UHFFFAOYSA-N
PubChem CID16402
ChEMBLCHEMBL303004
ChEBICHEBI:39618
EC No.204-679-6
DTXSIDDTXSID5024922
Lokaler Name1,6-Diaminohexan

Chemische & physikalische Eigenschaften

XLogP-0,2
Polarare Oberfläche (TPSA)52
H-Brücken-Donoren2
H-Brücken-Akzeptoren2
Frei drehbare Bindungen5
Schwere Atome8
Formalladung0
Komplexität31,5
StoffklassenNitrogen Compounds -> Amines, AliphaticCorrosives
ArzneimittelPharmaceuticals -> Listed in ZINC15
SpringerMaterials PropertiesBoiling point
GeruchODOR OF PIPERIDINEWeak, fishy
Dichte(anhyd.) 0.799 at 140.0 °F (70% soln.) 0.933 at 20 °C (USCG, 1999)(anhyd) 0.799 at 60 °C (liquid)Relative density (water = 1): 0.930.799 at 140 °F (70% sol), 0.933 at 20 °C0.89 g/mL at 25 °C(lit.)
Color/FormCOLORLESS LEAFLETSRHOMBIC BIPYRAMIDAL PLATES
Löslichkeitgreater than or equal to 100 mg/mL at 73 °F (NTP, 1992)FREELY SOL IN WATERSLIGHTLY SOL IN ALC, BENZENESOMEWHAT SOL IN ETHERWater solubility = 2,460,000 mg/l at 4.5 °CSolubility in water: solublealcohol: soluble(lit.)490 g/L (20 ºC)
Flammpunkt178 °F (NTP, 1992)85 °C160 °F OC85 °C c.c.201 °F
Siedepunkt401 °F at 760 mmHg (NTP, 1992)205 °C199-205 °C204-205 °C
Schmelzpunkt108 °F (NTP, 1992)42 °C23-41 °C42-45 °C(lit.)
Dampfdichte4.01 (NTP, 1992) - Heavier than airwill sink (Relative to Air)4.01 (AIR= 1)Relative vapor density (air = 1): 3.84 (vs air)
Geruchsschwelle0.0041 mg/cu m0.0032 mg/cu m
Dampfdruck0.25 hPa (20 °C)
Brechungsindexn20/D 1.439(lit.)
LagerbedingungenStore below +30°C.
pKa (Säurekonstante)11.857(at 0℃)
AggregatzustandSolution
FarbeWhite, may discolor during storage
pH12.4 (100g/l, H2O, 25℃)
Geruchpyridine odor
Explosionsgrenze0.9-7.6%(V)
Merck14,4695
BRN1098307
Henry-Konstante1.0×103 mol/(m3Pa) at 25℃, Nguyen (2013)
StabilitätStable. Combustible. Incompatible with strong oxidizing agents, strong acids, organic materials.
Kosmetik-Inhaltsstoffe FunktionenBUFFERING
InChI1S/C6H16N2/c7-5-3-1-2-4-6-8/h1-8H2
InChIKeyNAQMVNRVTILPCV-UHFFFAOYSA-N
SMILESNCCCCCCN
LogP (Verteilungskoeffizient)0.4 at 25℃
CAS Datenbank124-09-4(CAS DataBase Reference)
NIST chemische Informationen1,6-Hexanediamine(124-09-4)
EPA chemische InformationenHexamethylenediamine (124-09-4)

Sicherheit & Vorschriften

GHS-EinstufungDangerH302: Harmful if swallowed [Warning Acute toxicity, oral]P260, P261, P264, P270, P271, P280, P301+P317, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P319, P321, P330, P362+P364, P363, P403+P233, P405, and P501 (click each P-code to see the statement)H302+H312 (38.6%): Harmful if swallowed or in contact with skin [Warning Acute toxicity, oralacute toxicity, dermal]P260, P261, P264, P264+P265, P270, P271, P280, P301+P317, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P319, P321, P330, P362+P364, P363, P403+P233, P405, and P501 (click each P-code to see the statement)
Regulatorische InformationenChemical: 1,6-Hexanediamine1,6-Hexanediamine is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 1,6-Hexanediamine are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)Status: Active Update: 05-04-2023 https://echa.europa.eu/registration-dossier/-/registered-dossier/160811,6-Hexanediamine: Does not have an individual approval but may be used under an appropriate group standardThe New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)
Weitere SicherheitsinformationenIMAP assessments - 1,6-Hexanediamine: Human health tier II assessment
DOT-KennzeichnungCorrosive
BrandgefahrenExcerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]:· Combustible material: may burn but does not ignite readily.Combustible.
BrandpotenzialCOMBUSTIBLE WHEN EXPOSED TO HEAT OR FLAME...
GesundheitsgefahrenVapors cause irritation of eyes and respiratory tract. Liquid irritates eyes and skin, may cause dermatitis. (USCG, 1999)Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]:· TOXIC and/or CORROSIVEinhalation, ingestion or skin contact with material may cause severe injury or death.
GefahrenübersichtA corrosive substance that can cause injury to the skin, eyes, and respiratory tractInhalation of high concentrations may cause pulmonary edema[ICSC] Allergic dermatitis, rhinitis, and asthma were reported in exposed workers. One case of acute hepatitis was reported. In animal experiments, 6 guinea pigs receiving orally 0.02 grams/day for 20-95 days are slowly poisoned and have weight loss, hemolytic anemia, leukopenia, liver damage, and kidney damageSimilar effects are seen in high-dose inhalation studies in rats inhaling 1.25 mg/m3 (0.26 ppm) 4 hours per day for 8 days[HSDB] Exposed workers complain of skin and respiratory tract irritation[ACGIH] Does not meet criteria for dermal sensitizer since animal studies were negative and human reports not confirmed[AIHA] A corrosive substance that can cause injury to the skin, eyes, and respiratory tract[MSDSonline]
DOT-Nummer und Handbuch2280 1531783 153
Reaktive GruppeAmines, Phosphines, and Pyridines
EG-EinstufungSymbol: CR: 21/22-34-37S: (1/2)-22-26-36/37/39-45
UN-EinstufungUN Hazard Class: 8UN Pack Group: III
Special ReportsDHHS/NTPNTP Technical Report on Toxicity Studies of 1,6-Hexanediamine Dihydrochloride Administered by Drinking Water and Inhalation to F344/N Rats and B6C3F1 Mice. Toxicity Rpt Series No. 24 NIH Publication No. 93-3347 (1993)
BrandbekämpfungExcerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]:Use water in large amounts, powder, alcohol-resistant foam, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water.
Erste-Hilfe-MaßnahmenFresh air, rest. Half-upright position. Artificial respiration may be needed. Refer for medical attention.Rinse skin with plenty of water or shower. Refer for medical attention .First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.Rest. Refer for medical attention .
Freisetungsmaßnahmen· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.
Erste HilfeEYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]:General First Aid:
Sichere LagerungSeparated from strong oxidants and strong acids. Well closed.
Expositionsschutz und Persönliche Schutzausrüstung· Wear positive pressure self-contained breathing apparatus (SCBA).
BrandbekämpfungsverfahrenExtinguish with water, foam, dry chemical, or carbon dioxide.If material on fire or involved in fire: Do not extinguish fire unless flow can be stopped. Use water in flooding quantities as fog. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Solid streams of water may be ineffective. Use "alcohol" foam, dry chemical or carbon dioxide. /Hexamethylene diamine solution/If material on fire or involved in fire: Use water in flooding quantities as fog. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Solid streams of water may be ineffective. Use "alcohol" foam, dry chemical or carbon dioxide. /Hexamethylene diamine, solid/
ReinigungsverfahrenTREATMENT OF WASTE WATER CONTAINING HEXAMETHYLENEDIAMINE FROM POLYAMIDE MFG IN REVERSE OSMOSIS APPARATUS WITH CELLULOSE ACETATE MEMBRANES WAS STUDIED TO DETERMINE THE EFFECT OF HCL ADDITION ON TRANSPORT OF COMPONENTS OF THE SOLN THROUGH A MEMBRANE & TO ASSESS THE POSSIBILITY OF CHANGING THE PH OF THE CONCN FORMED IN THE APPARATUS.
Freisetung ohne BrandExcerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]:
EntsorgungsverfahrenSRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.FEASIBILITY OF MICROBIAL DECOMP OF ORGANIC WASTES UNDER CONDITIONS EXISTING IN DEEP WELLS WAS INVESTIGATED. UNDER AEROBIC CONDITIONS TEMP IS NOT A CONSTRAINTTHERMOPHILIC BACTERIA DECOMP A WIDE VARIETY OF COMPOUNDS. GROWTH OF THERMOPHILIC BACTERIA IS POSSIBLE WITH HEXAMETHYLENEDIAMINE.(1) Add to layer of sodium bisulfite. Spray with water and neutralize. ...
Verschüttetes entsorgenPersonal protection: complete protective clothing including self-contained breathing apparatus. Do NOT let this chemical enter the environment. Collect leaking and spilled liquid in sealable containers as far as possible. Carefully collect remainder. Then store and dispose of according to local regulations.
Preventive MeasuresIf material not on fire and not involved in fire: Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Build dikes to contain flow as necessary. /Hexamethylene diamine solution/If material not on fire and not involved in fire: Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. /Hexamethylene diamine, solid/Personnel protection: Avoid breathing vapors. Keep upwind. Avoid bodily contact with the material. ... Do not handle broken packages unless wearing appropriate personal protective equipment. Wash away any material which may have contacted the body with copious amounts of water or soap and water. ... If contact with the material anticipated, wear appropriate chemical protective clothing. /Hexamethylene diamine solutionhexamethylene diamine, solid/
UmweltverhaltenTERRESTRIAL FATE: Based on a recommended classification scheme(1), an estimated Koc value of 286(SRC), determined from a structure estimation method(2), indicates that hexamethylene diamine is expected to have moderate mobility in soil(SRC). Volatilization of hexamethylene diamine is not expected from moist soil surfaces(SRC) given an estimated Henry's Law constant of 3.2X10-9 atm-cu m/mole(SRC), using a fragment constant estimation method(3). Volatilization of hexamethylene diamine from dry soil surfaces is not expected(SRC) based on an extrapolated vapor pressure of 0.12 mm Hg(SRC) at 25 °C(4). Biodegradation is expected to be an important environmental fate process for this compound(SRC). Standard BOD dilution techniques with activated sludge indicate that hexamethylene diamine biodegrades under aerobic conditions(5-7).AQUATIC FATE: Based on a recommended classification scheme(1), an estimated Koc value of 286(SRC), determined from a structure estimation method(2), indicates that hexamethylene diamine is expected to adsorb to suspended solids and sediment in water(SRC). Hexamethylene diamine is not expected to volatilize from water surfaces(3,SRC) based on an estimated Henry's Law constant of 3.2X10-9 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). An experimental pKa value of 11(5), indicates that hexamethylene diamine will not dissociate significantly at environmentally important pH values(SRC). Biodegradation is expected to occur slowly in aqueous environments(SRC). Degradation rates of 4% and 10% were observed for hexamethylene diamine (50 ppm) incubated in water from the Mino River, Japan and seawater off the coast of Japan over a 3 day incubation period(6). According to a classification scheme(7), an estimated BCF value of 1(3,SRC), from an estimated log Kow of 0.35(8,SRC), suggests that bioconcentration in aquatic organisms is low(SRC).ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), hexamethylene diamine, which has an extrapolated vapor pressure of 0.12 mm Hg at 25 °C(2,SRC), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase hexamethylene diamine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC)the half-life for this reaction in air is estimated to be about 6 hours(3,SRC).
Unerwünschte WirkungenOccupational hepatotoxin - Secondary hepatotoxins: the potential for toxic effect in the occupational setting is based on cases of poisoning by human ingestion or animal experimentation.
ExpositionspfadeThe substance can be absorbed into the body by inhalation of its aerosol, through the skin and by ingestion.
Signs and SymptomsBurning sensation. Cough. Laboured breathing. Shortness of breath. Sore throat. Symptoms may be delayed.MAY BE ABSORBED! Redness. Skin burns. Pain. Blisters.Redness. Pain. Severe deep burns.Abdominal cramps. Abdominal pain. Burning sensation. Shock or collapse.
Ongoing Test StatusThe following link will take the user to the National Toxicology Program (NTP) Test Agent Search Results page, which tabulates all of the "Standard Toxicology & Carcinogenesis Studies", "Developmental Studies", and "Genetic Toxicity Studies" performed with this chemical. Clicking on the "Testing Status" link will take the user to the status (i.e., in review, in progress, in preparation, on test, completed, etc.) and results of all the studies that the NTP has done on this chemical. /1,6-Hexanediamine dihydrochloride/ [http://ntp-apps.niehs.nih.gov/ntp_tox/index.cfm?fuseaction=ntpsearch.searchresults&searchterm=6055-52-3]
ICSC Environmental DataThe substance is toxic to aquatic organisms.
Soil Adsorption/MobilityBased on a recommended classification scheme(1), an estimated Koc value of 286(SRC), determined from a structure estimation method(2), indicates that hexamethylene diamine is expected to have moderate mobility in soil(SRC).
TSCA Test Submissions1,6-Hexanediamine (CAS # 124-09-4) was evaluated for acute oral toxicity in Long Evans rats (5/sex/group) administered single gavage (free base) doses of 485, 679, 950, 1,330, and 1,960 mg/kg bodyweight and in additional groups given gavage doses of 950, 1,330, 1,860, 2,600, and 3,640 mg/kg. Treatment was associated with progressively more serious signs of toxicity with greater dosages. Pharmacotoxic signs upon oral administration of hexanediamine at doses of 485-1860 mg/kg bodyweight included immediate hypokinesis, hyperventilation, coarse body tremors, and abdominal grip. At doses of 1860 mg/kg and above, the adverse responses were profound and all animals were dead within 24 hours of dosing. An LD50 was 830 mg/kg with 95% confidence limits of 730 and 950 mg/kg. Necropsy of study lethalities revealed severe irritation of the mucous membranes and extensive gastrointestinal hemorrhaging.Hexamethylene Diamine, (CAS # 124-09-4) was evaluated in Charles River COBS CD rats (26/sex/group) administered measured dietary doses of 0, 50, 150, and 500 mg/kg bodyweight at 78.02% concentration in two successive generations (F0 and F1). A control group received the basal laboratory diet with an ethanol (solvent) concentration equivalent to that in the high-dose diet. F0 and F1 were mated once to produce F1 and F2 progeny, respectively. Treatment was associated with reduced bodyweight gains in high- and mid-dose F0 and F1 males and in high-dose F1 females. Food consumption was reduced in F0 and F1 females. High-dose F0 and F1 females demonstrated significantly lower weight gains during gestational periods. Fertility indices of dams and sires and the testes weights of males without litters did not reveal an adverse effect of treatment. Copulation, gestation, weaning intervals, and dynamics of dams were comparable to controls at all treatment levels in both generations. A 500 mg/kg high dose was associated with significant (p<0.05) reductions in both F1 and F2 progeny numbers as well as pup weights on lactation days 14 and 21. Smaller viable litter sizes did not correlate with increased numbers of dead pups. Survival through weaning was comparable in the progeny of control and all treated rats of both generations. Antemortem pathology on terminal necropsy of all high-dose and control parents revealed no gross lesions and no microscopic changes related to treatment. A dietary "no effect" level was 150 mg/kg day and researchers concluded that fetal developmental toxicity was produced only at levels associated with significant maternal toxicity.Hexamethylene diamine (1,6-diaminohexane, CAS# 124-09-4) was administered in the diet to groups of 52 rats (26 males and 26 females) at doses of 50, 150, and 500 mg/kg/day for two generations. A control group received the basal laboratory diet. The F0 and F1 generations were each mated once to produce F1 and F2 generations. Treatment related changes included reduction in weight in F0 males and F1 males and females and reduced food consumption among F0 and F1 males and females in the high dose group. The high dose group also showed reduced litter size, and decreased pup weight on lactation days 14 and 21 for both generations. No other treatment effects were noted with regard to lactation, female body weights, fertility indices, copulatory interval, gestation length, pup survival or appearance, or testes weight or appearance. The authors conclude that the 150 mg/kg/day level can be considered the dietary "no effect" level. This EPA status report only includes a summary of this study.
Human Toxicity ExcerptsCONJUNCTIVAL & UPPER RESPIRATORY TRACT IRRITATION HAS BEEN OBSERVED IN WORKERS HANDLING HEXAMETHYLENEDIAMINE. ONE WORKER, OUT OF 20 STUDIED, DEVELOPED ACUTE HEPATITIS FOLLOWED BY DERMATITIS WHICH WAS ATTRIBUTED TO HEXAMETHYLENEDIAMINE. NO ANEMIA WAS OBSERVED....CASE...DESCRIBED IN ITALY IN WHICH 20 WORKERS WERE EXPOSED TO HEXAMETHYLENE DIAMINE & 8 SUFFERED FROM IRRITATION TO EYES & UPPER RESPIRATORY TRACT, WHILE ONE CONTRACTED DERMATITIS, & ANOTHER, ACUTE LIVER DISEASE. DERMATITIS HAS...BEEN DESCRIBED IN FRANCE...Workers involved in the production of condensers were examined. Their contact with hexamethylenediamine, capon lacquer, and epoxide tar results in development of allergic diseases, such as atopic forms of bronchial asthma, allergic rhinitis and dermatitis.
Artificial Pollution SourcesHexamethylene diamine's production and use as a chemical intermediate in the production of nylon-type polyimide resins(1) may result in its release to the environment through a variety of waste streams(SRC).
Environmental BiodegradationBiodegradation is expected to be an important environmental fate for this compound(SRC). Using a standard BOD dilution technique and an activated sludge inoculum, a theoretical BOD of 56% was observed during a 14 day incubation period(1). Using standard BOD dilution techniques and activated sludge inocula, theoretical BOD values of 41% to 56% were observed during a 14 day incubation period following a 6 day acclimation period(2). Based on 14 day BOD data, hexamethylene diamine is considered biodegradable(3). Following a 3 day acclimation period, 90% biodegradation of hexamethylene diamine in an activated sludge inoculum was observed during a 6 day incubation period, with an average COD of 26% per day(4). Degradation rates of 4% and 10% were observed for hexamethylene diamine (50 ppm) incubated in water from the Mino River, Japan and seawater off the coast of Japan over a 3 day incubation period(5). A theoretical oxygen demand between 20 and 60% was observed for hexamethylene diamine in a Warburg apparatus during a 5 day incubation period(6).
Environmental BioconcentrationAn estimated BCF value of 1 was calculated for hexamethylene diamine(SRC), using an estimated log Kow of 0.35(1,SRC) and a recommended regression-derived equation(2). According to a classification scheme(3), this BCF value suggests that bioconcentration in aquatic organisms is low(SRC).
F10-34
Wassergefährdungsklasse (WGK)3
TSCA-Inventar-StatusTSCA listed
UN-TransportnummerUN 2280 8/PG III (HEXAMETHYLENEDIAMINE, SOLID)
Zollcode2921 22 00
RTECS-Nr.MO1180000
R-Sätze (R)34-37-21/22-20/21/22
ToxizitätLD50 orally in Rabbit: 850 mg/kg LD50 dermal Rabbit 1110 mg/kg
GefahrensymboleC
Sicherheitshinweise (S)26-36/37/39-45-22-27
Gefahrenklasse8Acute Tox. 4 DermalAcute Tox. 4 OralEye Dam. 1Skin Corr. 1BSTOT SE 3
VerpackungsgruppeIII
Lagerklasse8A - Combustible corrosive hazardous materials
Gefahrstoffdaten124-09-4(Hazardous Substances Data)
Selbstentzündungstemperatur305 °C

Anwendungen & Verwendung

Verwenden

Hexamethylenediamine is mainly used as a monomer to make nylon 6-6. Its derivative hexamethylene diisocyanate (HDI) is used in the production of polyurethane. It acts as a cross-linking agent in epoxy resins. Other applications include fiber, plastics, polyurethane coatings, lubricants, water treatment products and specialty chemicals (biocides, petroleum additives, and phenol purification).

Herstellung & Synthese

synthetische

Virtually all hexamethylenediamine is now produced by the catalytic hydrogenation of adiponitrile[111-69-3] :NC(CH2)4CN + 4H2 → H2N(CH2)6NH2.