StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Verbindung

Pent-3-ennitril

3-Pentenenitrile

HCID 20750
Neue Reaktion
Drucken
GrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
TeilstruktursucheÄhnliche Strukturen suchen

Grundinformationen

CAS
4635-87-4
Standard-SMILES
CC=CCC#N
InChIKey
UVKXJAUUKPDDNW-UHFFFAOYSA-N
Summenformel
C5H7N
Durchschnittliche Molmasse
81,12 g/mol
Monoisotopische Masse
81,05784923

Überblick

See also: 3-Pentenenitrile, (liquid) (annotation moved to); Pent-3-enenitrile (annotation moved to).

Namen und Bezeichner

Bevorzugter Name
3-Pentenenitrile
IUPAC
pent-3-enenitrile
Lokaler Name
Pent-3-ennitril
Englischer Name
3-Pentenenitrile
Summenformel
C5H7N
Molmasse
81.12

Namen und Synonyme

3-PENTENENITRILE4635-87-43-PentenonitrileDTXSID1025851SCHEMBL155326SCHEMBL386511SCHEMBL701763SCHEMBL931351SCHEMBL3854073CHEMBL3181969SCHEMBL18632163UVKXJAUUKPDDNW-UHFFFAOYSA-N
Weitere Namen anzeigen
3-Pentcrotyl cyanide1-CYANO-2-BUTENEpent-3-enenitrile3-penetenenitrlle2-Butenyl cyanide3-Pentenenitrile>2-BUTEN-1-YL CYANIDE
CID 20750AKOS028108399NS00077449

Datenbank-Bezeichner

CAS
4635-87-4
PubChem CID
20750
DTXSID
DTXSID1025851
ChEMBL
CHEMBL3181969

Eigenschaften

Berechnete Struktureigenschaften

XLogP
1
Polarare Oberfläche (TPSA)
23,8 Ų
H-Brücken-Donoren
0
H-Brücken-Akzeptoren
1
Frei drehbare Bindungen
1
Schwere Atome
6
Formalladung
0
Komplexität
83,4

Experimentelle und physikochemische Eigenschaften

Chemical ClassesNitrogen Compounds -> Nitriles
SpringerMaterials PropertiesOptical coefficient
Flash Point40 °C
Vapor Pressure4.05 [mmHg]
Physical Description · 2 Einträge

Liquid

A colorless to amber liquid; [CAMEO]

Physikochemische Eigenschaften

Siedepunkt
144 · 144-147 °C(lit.)
Dichte
0.842 g/mL · 0.842 g/mL at 20 °C(lit.)
Dampfdruck
24.9 mm · 24.9 mm Hg ( 50 °C)
Brechungsindex
20 · n20/D 1.422
Flammpunkt
104 °F · 104 °F
CAS Datenbank
4635 · 4635-87-4
EPA chemische Informationen

Sicherheit und Regulatorisches

Sicherheitsangaben dienen nur zur Orientierung und ersetzen weder das Sicherheitsdatenblatt (SDB) des Lieferanten noch geltende Vorschriften oder eine fachliche Bewertung.

Gefahrenhinweise

Regulatory Information · 1 Eintrag

3-Pentenenitrile is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 3-Pentenenitrile are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

Hazards Summary · 1 Eintrag

An eye irritant; Emergency treatment: Propionitrile; Propionitrile can cause cyanide poisoning with rapid loss of consciousness; [HSDB] Mild irritant in eye of rabbit; [RTECS] Prolonged exposure may result in delayed cyanide poisoning. [CAMEO] See NITRILES.

Skin, Eye, and Respiratory IrritationsImmediately irritating to the eye. /Cyanides/
Hazardous Reactivities and IncompatibilitiesIncompatible with strong oxidizers such as acids, acid salts, chlorates and nitrates. /Cyanides/

Sicherheit und Schutzausrüstung

Disposal Methods · 2 Einträge

Generators of waste (equal to or greater than 100 kg/mo) containing this contaminant, EPA hazardous waste numbers D003 and P030 must conform with USEPA regulations in storage, transportation, treatment and disposal of waste. /Cyanide cmpd/

A poor candidate for incineration. /Cyanides/

Preventive Measures · 5 Einträge

Workers should wash: Immediately when skin becomes contaminated. /Cyanides/

Work clothing should be changed daily: If there is any possibility that the clothing may be contaminated. /Cyanides/

Remove clothing: Immediately if it is non-impervious clothing that becomes contaminated. /Cyanides/

Chemie und Industrie

Verwendung und Herstellung

UsesUsed in the manufacture of organic chemicals; [CAMEO]
U.S. Production2023: 500,000,000 - <1,000,000,000 lb
Industry UsesSolvent
General Manufacturing Information · 2 Einträge

All Other Basic Organic Chemical Manufacturing

3-Pentenenitrile: ACTIVE

Vor- und nachgelagerte Produkte

Nachgelagerte Produkte

Pent-2-ennitril

Zugehörige Reaktionen

8
Reaktionsaufzeichnung erstellen
Reaktionsgleichung von HRID 268338
HRID 268338als Produkt
Reaktionsgleichung von HRID 451354
HRID 451354als Edukt
Reaktionsgleichung von HRID 821828
HRID 821828als Produktals Edukt
Reaktionsgleichung von HRID 939264
HRID 939264als Edukt
Reaktionsgleichung von HRID 1439536
HRID 1439536als Edukt
Reaktionsgleichung von HRID 1439538
HRID 1439538als Edukt
Reaktionsgleichung von HRID 2082794
HRID 2082794als Produkt
Reaktionsgleichung von HRID 2206339
HRID 2206339als Produkt

Notizen zur Verbindung

Auf dieser SeiteGrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
3 · 3-Pentenenitrile (4635-87-4)

All nitriles should be handled under carefully controlled conditions and only by personnel having a thorough understanding and knowledge of safe handling techniques. Because of the nature of nitrile cmpd and the lack of complete toxicity data on many nitriles, care should be exercised in handling these cmpd to avoid inhalation of the vapors, ingestion, and contact with the skin. /Nitriles/

SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.

Personal Protective Equipment (PPE) · 5 Einträge

Wear appropriate equipment to prevent: Any possibility of skin contact. /Cyanides/

Wear eye protection to prevent: Any possibility of eye contact. /Cyanides/

The following equipment should be available: Eyewash, quick drench. /Cyanides/

Recommendations for respirator selection. Max concn for use: 50 mg/cu m: Respirator Classes: Any supplied-air respirator. Any self-contained breathing apparatus. /Cyanides/

For more Personal Protective Equipment (PPE) (Complete) data for 3-PENTENENITRILE (6 total), please visit the HSDB record page.

Toxikologische Informationen

Interactions · 1 Eintrag

The toxic mechanism of nitriles (including 3-pentenenitrile) and the effect of metabolic modifiers in mice were studied in relation to their physicochemical properties. All the test nitriles liberated cyanide both in vivo and in vitro, with the exception of benzonitrile, although the extent of liberation and the effect of carbon tetrachloride pretreatment on the mortality of animals differed among nitriles. From these results, test compounds were tentatively divided into 3 groups. In group 1, acute toxicity was greatly reduced by carbon tetrachloride pretreatment, in group 2, toxicity was not significantly changed or was somewhat enhanced, and in group 3, benzonitrile only, toxicity was clearly enhanced. The amount of cyanide was higher at death in the brains of mice given group 1 compounds, the level being comparable to that found in mice killed by dosing with potassium cyanide. The relation between log (1/LD50) and log p for the compounds in group 1 fitted a parabolic plot, while that for compounds in group 2 was linear. For most nitriles, the in vitro metabolism was inhibited when the incubation mixture contained either SKF-525A, carbon monoxide, or microsomes from mice treated with carbon tetrachloride. When mice were closed with ethyl alcohol, metabolic enhancement of nitriles was seen compared with the control. However, ethyl alcohol, when added to the incubation mixture, inhibited the in vitro metabolism of nitriles.

Adverse EffectsOther Poison - Chemical Asphyxiant
Non-Human Toxicity Excerpts · 1 Eintrag

STRUCTURE-ACTIVITY RELATIONSHIPS WERE QUALITATIVELY & QUANTITIVELY EXAMINED FOR 56 COMPOUNDS (EG DERIVATIVES OF PROPIONITRILE, ACRYLONITRILE, & CYSTEAMINE) WHICH CAUSED DUODENAL ULCER &/OR ADRENOCORTICAL NECROSIS IN RATS. ULCEROGENIC ACTIVITY WAS MOST INTENSE IN THE CARBONITRILES ATTACHED TO 2 OR 3-C BACKBONES.

Antidote and Emergency Treatment · 3 Einträge

Rapid support of respiration and circulation is essential to successful treatment of cyanide intoxication. Massive cyanide overdoses have survived with only good supportive care. Immediate attention should be directed toward assisted ventilation, administration of 100% oxygen, insertion of intravenous lines, and institution of cardiac monitoring. Obtain an arterial blood gas immediately and correct any severe metabolic acidosis (pH below 7.15). Oxygen (100%) should be used routinely in moderate or severely symptomatic patients even in the presence of a normal pO2, since 100% O2 increases O2 delivery, may reactivate cyanide-inhibited mitochondrial enzymes, and potentiates the effect of thiosulfate. Avoid mouth to mouth resuscitation during CPR in order to prevent self poisoning. /Cyanides/

Amyl nitrite perles are designed to produce 3% to 5% methemoglobinemia while an iv line is established for iv sodium nitrite. As a temporizing measure, the patient inhales the vapors until the sodium nitrite is ready. Because of the variability in methemoglobin production and the potential for cardiovascular collapse, this step may be omitted if sodium nitrite is readily available and the patient is not in extremis. Adequate ventilation and oxygenation are more important than administration of amyl nitrite. One perle (0.2 ml) is crushed and inhaled for 30 seconds every minute until iv nitrite is given. Sodium nitrite (3% solution), as 10 ml of a 3% solution (eg, 300 mg), is administered iv slowly over 4 minutes to produce a 20% methemoglobin level in adults. Children should receive 0.33 ml of the 3% solution per kilogram initially at an infusion rate of 2.5 ml/min, up to a maximum of 10 ml. Administer sodium nitrite doses to children on the basis of body weight, since fatal methemoglobinemia has occurred in children. /Cyanides/

A case of cyanide poisoning resulting from exposure to propionitrile was decribed. A 55 year old male employed at a chemical facility suffered dermal and respiratory exposure while attempting to repair a pump leaking propionitrile. Although he was wearing gloves, he did not have any other protective equipment. He rapidly lost consciousness and was taken to the infirmary. Upon arrival at the infirmary, he was comatose and unresponsive. He was administered oxygen at the rate of 5 l/min and transferred to the intensive care unit of a hospital. Clinical studies showed evidence of respiratory alkalosis and mild metabolic acidosis. The patient received 4 g hydroxycobalamin and 8 g sodium thiosulfate iv over 30 minutes. The symptoms completely cleared up over the next hr. Blood cyanide and thiocyanate concentrations were monitored. Before receiving the hydroxycobalamin and thiosulfate treatment, his blood cyanide concn was 5.71 ug/ml. The thiocyanate concn was negligible. After the cyanide/thiosulfate infusion was completed, the blood cyanide concn had decreased to 0.93 ug/ml and the thiocyanate had increased to 21.1 ug/ml. The thiocyanate concentrations returned to the baseline value 5 hr after treatment. ... Propionitrile can release cyanide and produce serious poisoning after skin or inhalation exposure. The combination of sodium thiosulfate and hydroxycobalamin is an effective antidote. /Propionitrile/

Toxicity DataLC50 (rat) = 420 ppm/4h

Sicherheitsdaten

wgk
3
tsca
TSCA listed
ridadr
UN 3275 6.1/PG 2
risk_code
10-23/24/25-36/37/38
hazard_code
T
safety_code
45-41-36/37/39-14
hazard_class
3/6.1
packing_group
II
Giftige Stoffe Daten
4635-87-4(Hazardous Substances Data)