Bis(2,3-epoxypropyl)isophthalat

Diglycidyl isophthalate. · ISOPHTHALICDIGLYCIDYLESTER · bis(2,3-epoxypropyl) isophthalate · Isophthalic acid diglycidyl ester · bis(oxiran-2-ylmethyl) benzene-1,3-dicarboxylate · 1,3-Benzenedicarboxylic acid bis(oxiranylmethyl) ester · 1,3-Benzenedicarboxylic acid, 1,3-bis(2-oxiranylmethyl) ester

https://huagongshe.com/de/chemical/23600

Molekülstruktur von Bis(2,3-epoxypropyl)isophthalat

Identifikatoren & physikalische Daten

CAS No.	7195-43-9
Summenformel	C14H14O6
Durchschnittliche Molmasse	278,26 g/mol
Monoisotopische Masse	278,07903817 g/mol
SMILES	O=C(OCC1CO1)c1cccc(C(=O)OCC2CO2)c1
InChIKey	ZXOATMQSUNJNNG-UHFFFAOYSA-N
PubChem CID	23600
EC No.	230-564-5
DTXSID	DTXSID7025473
Lokaler Name	Bis(2,3-epoxypropyl)isophthalat

Chemische & physikalische Eigenschaften

XLogP	1
Polarare Oberfläche (TPSA)	77,7
H-Brücken-Donoren	0
H-Brücken-Akzeptoren	6
Frei drehbare Bindungen	8
Schwere Atome	20
Formalladung	0
Komplexität	348
Löslichkeit	less than 1 mg/mL at 66 °F (NTP, 1992)
Schmelzpunkt	142 to 145 °F (NTP, 1992)
Physical Description	Isophthalic diglycidyl ester is a white solid. (NTP, 1992)
Stabilität	Stable. Combustible. Incompatible with strong oxidizing agents.
CAS Datenbank	7195-43-9
EPA chemische Informationen	Diglycidyl isophthalate (7195-43-9)

Sicherheit & Vorschriften

Brandgefahren	Flash point data are not available for this chemical. It is probably combustible. (NTP, 1992)
Reaktive Gruppe	Esters, Sulfate Esters, Phosphate Esters, Thiophosphate Esters, and Borate Esters
Reactivity Profile	ISOPHTHALIC DIGLYCIDYL ESTER is an ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides.
Air and Water Reactions	Insoluble in water.
Brandbekämpfung	Fires involving this material can be controlled with a dry chemical, car bon dioxide or Halon extinguisher. (NTP, 1992)
Erste Hilfe	EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
Freisetung ohne Brand	SMALL SPILLS AND LEAKAGE: If you spill this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then dampen the solid spill material with toluene, then transfer the dampened material to a suitable container. Use absorbent paper dampened with toluene to pick up any remaining material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent-wash all contaminated surfaces with toluene followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
Personal Protective Equipment (PPE)	RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)