Phosphorige Säure-trichlorid
PCl3 · Phosphorous trichloride · trichlorophosphane · PHOSPHORUS CHLORIDE · Phosphorous chloride · Phosphortrichlorid · Trichlorophosphine · phosphore(trichlorurede)

Identifikatoren & physikalische Daten
| CAS No. | 7719-12-2 |
|---|---|
| Summenformel | Cl3P |
| Durchschnittliche Molmasse | 137,33 g/mol |
| Monoisotopische Masse | 135,88032 g/mol |
| SMILES | ClP(Cl)Cl |
| InChIKey | FAIAAWCVCHQXDN-UHFFFAOYSA-N |
| PubChem CID | 24387 |
| ChEBI | CHEBI:30334 |
| EC No. | 231-749-3 |
| DTXSID | DTXSID5029687 |
| Lokaler Name | Phosphorige Säure-trichlorid |
Chemische & physikalische Eigenschaften
| XLogP | 2,3 |
|---|---|
| Polarare Oberfläche (TPSA) | 0 |
| H-Brücken-Donoren | 0 |
| H-Brücken-Akzeptoren | 0 |
| Frei drehbare Bindungen | 0 |
| Schwere Atome | 4 |
| Formalladung | 0 |
| Komplexität | 8 |
| Geruch | PungentSmells like hydrochloric acid |
| Dichte | 1.574 at 69.8 °F (EPA, 1998) - Denser than waterwill sink1.574 at 21 °CRelative density (water = 1): 1.61.581.574 @25 °C1.574 g/mL at 25 °C |
| Viscosity | 0.65 cP at 0 °C0.438 cP at 50 °C |
| Color/Form | Clear colorless, fuming liquidColorless to yellow, fuming liquid. |
| Löslichkeit | Reacts with water (NIOSH, 2024)Reacts with water, ethanolsoluble in benzene, chloroform, etherSoluble in carbon tetrachlorideSolubility in water: reactionSoluble in benzene, carbon sulfide, ether, chloroform, carbon tetrachloride. |
| Corrosivity | Corrodes most common construction materials. |
| Siedepunkt | 169 °F at 760 mmHg (EPA, 1998)76.1 °C76 °C76 °C @760 [mm Hg]74-78 °C(lit.) |
| Decomposition | When heated to decomposition it emits toxic fumes of /hydrogen chloride and phosphorus oxide/.DECOMPOSED BY WATER OR ALC.... If involved in a fire decomposes to produce hydrogen chloride, phosphoric acid, phosphine. |
| Schmelzpunkt | -170 °F (EPA, 1998)-93.6 °C-112 °C-93 °C |
| Dampfdichte | 4.75 (EPA, 1998) - Heavier than airwill sink (Relative to Air)4.75 (air= 1)Relative vapor density (air = 1): 4.754.75 (vs air) |
| Geruchsschwelle | Phosphorus trichloride ... can be detected at about 0.5 mg/cu m. |
| Dampfdruck | 100 mmHg at 69.8 °F (EPA, 1998)120.0 [mmHg]120 mm Hg at 25 °CVapor pressure, kPa at 21 °C: 13.3100 mmHg at 69.8 °F120 [mm Hg] @25 °C23.32 psi ( 55 °C) |
| Brechungsindex | n20/D 1.5148(lit.) |
| Flammpunkt | 76°C |
| Lagerbedingungen | Store at RT. |
| Aggregatzustand | Liquid |
| Farbe | Yellow |
| Wichte | approximate 1.6 |
| Geruch | Pungent, irritating odor |
| pH | 1 (20°C, 5g/L in H2O) |
| Spezifische Wärmekapazität | Cp(gas): 0.52 J/(g·K), at 25℃ |
| Merck | 14,7358 |
| BRN | 969177 |
| Dielektrizitätskonstante | 3.7(18℃) |
| Stabilität | Stable, but light sensitive. Incompatible with water, many metals, fluorine, acids, variety of organic materials including acids, alcohols and reducing agents. Reaction with water is violent and yields toxic gas. |
| InChI | 1S/Cl3P/c1-4(2)3 |
| InChIKey | FAIAAWCVCHQXDN-UHFFFAOYSA-N |
| SMILES | P(Cl)(Cl)Cl |
| CAS Datenbank | 7719-12-2(CAS DataBase Reference) |
| NIST chemische Informationen | Phosphorus trichloride(7719-12-2) |
| EPA chemische Informationen | Phosphorus trichloride (7719-12-2) |
Sicherheit & Vorschriften
| GHS-Einstufung | DangerH300: Fatal if swallowed [Danger Acute toxicity, oral]H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]H330: Fatal if inhaled [Danger Acute toxicity, inhalation]H373 **: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]P260, P264, P270, P271, P280, P284, P301+P316, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P316, P319, P320, P321, P330, P363, P403+P233, P405, and P501 (click each P-code to see the statement)This chemical does not meet GHS hazard criteria for 3.5% (12 of 345) of reports. |
|---|---|
| Hazards Identification | Water-reactive material (WR)Toxic/poison by inhalation (TIH/PIH) |
| Regulatorische Informationen | Chemical: Phosphorus trichlorideStatus: Active Update: 30-08-2022 https://echa.europa.eu/registration-dossier/-/registered-dossier/14467Phosphorus trichloride: HSNO Approval: HSR003065 Approved with controlsThe New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.) |
| Weitere Sicherheitsinformationen | IMAP assessments - Phosphorus trichloride: Human health tier I assessmentIMAP assessments - Phosphorus trichloride: Environment tier I assessment |
| DOT-Kennzeichnung | Poison Inhalation Hazard Corrosive |
| Brandgefahren | This material will react violently with water, producing heat and toxic and corrosive fumes. When heated to decomposition, it emits highly toxic fumes of chlorides and phosphorus oxides. It may ignite other combustible materials. Reacts violently with water. Reacts explosively with acetic acid, aluminum, chromyl chloride, diallylphosphite and allyl alcohol, dimethyl sulfoxide, fluorine, hydroxylamine, iodine monochloride, lead dioxide, nitric acid, nitrous acid, organic matter, potassium, and sodium. Avoid contact with water, steam, or acids. Hazardous polymerization may not occur. (EPA, 1998)· EXCEPT FOR ACETIC ANHYDRIDE (UN1715), THAT IS FLAMMABLE, some of these materials may burn, but none ignite readily. |
Anwendungen & Verwendung
Beschreibung
Phosphorus trichloride, PCl3, is a clear, colorless, fuming, corrosive liquid. It decomposes rapidly in moist air and has a boiling point of about 168°F (75°C). PCl3 is corrosive to skin and tissue and reacts with water to form hydrochloric acid. The TLV is 0.2 ppm, and the IDLH is 50 ppm in air. The four-digit UN identification number is 1809. The NFPA 704 designation is health 4, flammability 0, and reactivity 2. The white section at the bottom of the diamond contains a W with a slash through it, indicating water reactivity. The primary uses are in the manufacture of organophosphate pesticides, gasoline additives, and dyestuffs; as a chlorinating agent; as a catalyst; and in textile finishing. Corrosives in contact with a poison may produce poison gases as the poison decomposes. In responding to an incident involving corrosives, the toxicity of the vapors could be much more of a concern for personnel than the corrosivity. When acids come in contact with cyanide, hydrogen cyanide gas, which is highly toxic, with a TLV of 10 ppm in air, is produced.
Verwenden
Phosphorus trichloride is an important intermediate in the production of insecticides, herbicides, and organophosphorus pesticides as well as other chemicals such as phosphoryl chloride, phosphorus pentachloride, thiophosphoryl chloride, and phosphonic acid. It is also used in the production of synthetic surfactants, phosphites, gasoline additives, flame retardants, silver polish, and producing iridescent metallic deposits.