StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Verbindung

Bleidiiodid

Lead iodide

HCID 24931
Neue Reaktion
Drucken
GrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
TeilstruktursucheÄhnliche Strukturen suchen

Grundinformationen

CAS
10101-63-0
Standard-SMILES
[I][Pb][I]
InChIKey
RQQRAHKHDFPBMC-UHFFFAOYSA-L
Summenformel
PbI2
Durchschnittliche Molmasse
461 g/mol
Monoisotopische Masse
461,7856

Überblick

Lead iodide appears as a yellow crystalline solid. Insoluble in water and denser than water. Primary hazard is threat to the environment. Immediate steps should be taken to limit spread to the environment. Used in printing and photography, to seed clouds and other uses.

Namen und Bezeichner

Bevorzugter Name
Lead iodide
IUPAC
diiodolead
Lokaler Name
Bleidiiodid
Englischer Name
Lead(II) iodide
Summenformel
I2Pb
Molmasse
461.01

Namen und Synonyme

Lead(II) iodideLEAD IODIDEPlumbous iodidelead (II) iodidePlumbum jodatumBlei(II)-iodidUNII-OTL90F2GLTHSDB 636EINECS 233-256-9OTL90F2GLTC.I. 77613Yoduro de plomo
Weitere Namen anzeigen
PbI2LEAD DIIODIDESuper PbI2Lead(II) diiodideLEAD IODIDE, 98.5%I2PbLT-S9147Lead lodi de
Lead(2+) iodideRefChem:57890DTXCID1082801233-256-913779-98-1DTXSID00160310Plumbum Iodatumdiiodolead

Datenbank-Bezeichner

CAS
10101-63-0
PubChem CID
24931
EC Number
233-256-9

Eigenschaften

Berechnete Struktureigenschaften

Polarare Oberfläche (TPSA)
0 Ų
H-Brücken-Donoren
0
H-Brücken-Akzeptoren
0
Frei drehbare Bindungen
0
Schwere Atome
3
Formalladung
0
Komplexität
2,8

Experimentelle und physikochemische Eigenschaften

Chemical Classes · 2 Einträge

Metals -> Lead Compounds, Inorganic

Carcinogens

SpringerMaterials Propertiesphonon wavenumber
OdorOdorless
Density · 3 Einträge

6.16 at 68 °F (USCG, 1999) - Denser than water; will sink

6.16 g/cu cm

6.16 @25 °C

Color/Form · 2 Einträge

Yellow hexagonal crystals

Bright yellow powder

Solubility · 3 Einträge

Soluble in potassium iodide and concentrated sodium acetate solutions

Sol in concd solns of alkali iodides; freely sol in soln of sodium thiosulfate; sol in 200 parts cold, 90 parts hot aniline; insol in alcohol or cold HCl.

Water (g/100 cu cm) 0.076 at 20 °C

Boiling Point872 °C (decomposes)
Melting Point · 2 Einträge

410 °C

410 °C

Sicherheit und Regulatorisches

Sicherheitsangaben dienen nur zur Orientierung und ersetzen weder das Sicherheitsdatenblatt (SDB) des Lieferanten noch geltende Vorschriften oder eine fachliche Bewertung.

GHS-Klassifizierung

GHS Classification · 6 Einträge

Danger

H302 (95.8%): Harmful if swallowed [Warning Acute toxicity, oral]

P203, P260, P261, P264, P270, P271, P273, P280, P301+P317, P304+P340, P317, P318, P319, P330, P391, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 48 reports by companies from 7 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Danger

H351: Suspected of causing cancer [Warning Carcinogenicity]

Gefahrenhinweise

Regulatory Information · 2 Einträge

Restricted substance: Lead diiodide

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT LabelPoison
Fire HazardsExcerpt from ERG Guide 151 [Substances - Toxic (Non-Combustible)]:
Health Hazards · 1 Eintrag

Early symptoms of lead intoxication via inhalation or ingestion are most commonly gastrointestinal disorders, colic, constipation, etc.; weakness, which may go on to paralysis, chiefly of the extensor muscles of the wrists and less often the ankles, is noticeable in the most serious cases. Ingestion of a large amount causes local irritation of the alimentary tract. Pain, leg cramps, muscle weakness, paresthesias, depression, coma, and death may follow in 1 or 2 days. Contact with eyes causes irritation. (USCG, 1999)

Hazards SummarySee Lead and linked occupational diseases. See Iodine for the TLV of Iodides.

Chemie und Industrie

Pharmakologische Informationen

Metabolism/Metabolites · 1 Eintrag

Lead is absorbed following inhalation, oral, and dermal exposure. It is then distributed mainly to the bones and red blood cells. In the blood lead may be found bound to serum albumin or the metal-binding protein metallothionein. Organic lead is metabolized by cytochrome P-450 enzymes, whereas inorganic lead forms complexes with delta-aminolevulinic acid dehydratase. Lead is excreted mainly in the urine and faeces. (L136)

Verwendung und Herstellung

Uses · 5 Einträge

Used in photographic films and emulsions, aerosols for cloud seeding, asbestos brake linings; batteries, mercury-vapor lamps, thermoelectric materials, and lubricants; [HSDB] Used in bronzing, printing, photography and special gold applications; [Merck Index]

Battery Manufacturing [Category: Industry]

Films for recording optical images; photographic emulsions with thiols; in aerosols for cloud seeding; asbestos brake linings; primary thermal batteries with iodine; mercury-vapor arc lamps; thermoelectric materials; lubricating greases; electrosensitive recording papers; and filters for far-infrared astronomy.

Bronzing, printing, photography, cloud seeding

Lead iodide is used in the detection of x-rays and gamma rays. (L410)

Methods of Manufacturing · 2 Einträge

Interaction of lead acetate and potassium iodide.

... Made by reacting a water-soluble lead compound with hydroiodic acid or with a soluble metal iodide. it is readily purified by recrystallization from water.

Formulations/Preparations · 2 Einträge

Grades or purity: 98.5+%; NF

CI 77613

Anwendungen · 1 Eintrag

VerwendenLead(II) iodide is used as a detector material for high energy photons including x-rays and gamma rays. It is used in photography, printing, mosaic gold, and bronzing. It exhibits ferroelastic properties and has efficiency in stopping X-ray and gamma ray, which provides excellent environmental stability.

Zugehörige Reaktionen

3
Reaktionsaufzeichnung erstellen
Reaktionsgleichung von HRID 425429
HRID 425429als Edukt
Reaktionsgleichung von HRID 1881514
HRID 1881514als Edukt
Reaktionsgleichung von HRID 2339008
HRID 2339008als Edukt

Notizen zur Verbindung

Auf dieser SeiteGrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
Vapor Pressure
100 Pa Hg at 470 °C; 1000 Pa at 558 °C; 10,000 Pa at 682 °C; 100,000 Pa at 869 °C
Heat of Vaporization104 kJ/mol at 872 °C (boiling point)
Physical Description · 2 Einträge

Lead iodide appears as a yellow crystalline solid. Insoluble in water and denser than water. Primary hazard is threat to the environment. Immediate steps should be taken to limit spread to the environment. Used in printing and photography, to seed clouds and other uses.

Bright yellow solid; [Merck Index] Slightly soluble in water(630 mg/L at 20 deg C); [ATSDR ToxProfiles]

Other Experimental Properties · 5 Einträge

Heat of fusion: 23.40 kJ/mol at 410 °C

Decomposes when exposed to green light at about 180 °C.

Lead is derived from the decay of radon. /Inorganic lead/

Natural lead is a mixture of four stable isotopes: Pb-204 (1.4%), Pb-206 (25.2%), Pb-207 (21.7%) and Pb-208 (51.7%). Lead isotopes are the end-products of each of the three series of naturally occurring radioactive elements: Pb-206 for the uranium series, Pb-207 for the actinium series and Pb-208 for the thorium series. Forty-three other isotopes of lead, all of which are radioactive, are recognized.

Divalent lead has a strong affinity for inorganic ions containing oxygen (eg, carbonate) or sulfur (sulfide). Lead can also complex with electron rich ligands in many organic cmpd such as amino acids, proteins, and humic acid.

Physikochemische Eigenschaften

Schmelzpunkt
402 °C · 402 °C(lit.)
Siedepunkt
954 °C · 954 °C(lit.)
Dichte
6.16 g/mL · 6.16 g/mL at 25 °C(lit.)
Flammpunkt
954 °C · 954°C
storage temp.
Keep in dark place,Inert atmosphere,Room temperature
Löslichkeit
Soluble in concentrated solutions of alkali iodides and sodium thiosulfate. Insoluble in alcohol and cold hydrochloric acid.
Aggregatzustand
beads
Farbe
Yellow to orange
Wichte
6.16 · 6.16
Wasserlöslichkeit
Partially soluble in water. Freely soluble in sodium thiosulfate solution. Soluble in concentrated solutions of alkali iodides. Insoluble in alcohol and cold HCl.Soluble in concentrated solutions of alkali iodides and sodium thiosulfate. Insoluble in alcohol and cold hydrochloric acid.
Spezifische Wärmekapazität
0.17 J/ · Cp(crystal): 0.17 J/(g·K), at 25℃
Merck
14 · 14,5411
Stabilität
Stable. May discolour upon exposure to light.
Major Application
material synthesis precursorperovskite solar cells
InChI
1S/2HI.Pb/h2*1H;/q;;+2/p-2
InChIKey
RQQRAHKHDFPBMC-UHFFFAOYSA-L
SMILES
I[PbH2]I
CAS Datenbank
10101 · 10101-63-0(CAS DataBase Reference)
NIST chemische Informationen
Lead diiodide(10101-63-0)
EPA chemische Informationen
Lead(II) iodide (10101-63-0)
Reactive Group
Non-Redox-Active Inorganic Compounds
Special Reports · 1 Eintrag

National Toxicology Program. Eleventh Report on Carcinogens (2005). The Report on Carcinogens is an informational scientific and public health document that identifies and discusses substances (including agents, mixtures, or exposure circumstances) that may pose a carcinogenic hazard to human health. Lead and Lead Compounds are listed as reasonably anticipated to be human carcinogens. /Lead and Lead Compounds/[Available from, as of July 31, 2009: http://ntp.niehs.nih.gov/ntp/roc/eleventh/profiles/s101lead.pdf]

RCRA Requirements · 2 Einträge

D008; A solid waste containing lead may or may not become characterized as a hazardous waste when subjected to the Toxicity Characteristic Leaching Procedure listed in 40 CFR 261.24, and if so characterized, must be managed as a hazardous waste. /Lead/

The Environmental Protection Agency is ... /promulgated/ regulations concerning ground-water monitoring with regard to screening suspected contamination at land based hazardous waste treatment, storage, and disposal facilities. ... /There are/ new requirements to analyze for a specified core list of chemicals plus those chemicals specified by the Regional Administrator on a site-specific basis. ... /Total lead (all species) is included on this list./ /Total lead (all species)/

OSHA Standards · 5 Einträge

Permissible Exposure Limit: The employer shall assure that no employee is exposed to lead at concentrations greater than 50 ug/cu m of air averaged over an 8-hr period. If an employee is exposed to lead for more than 8 hr in any work day, the permissible exposure limit, as a TWA for that day, shall be reduced according to the following formula: Maximum permissible limit (in ug/cu m)=400 divided by the number of hours worked in the day. /Lead, inorganic, as Pb/

The employer shall remove an employee from work having an exposure to lead at or above the action level on each occasion that a periodic and a follow-up blood sampling test conducted pursuant to this section indicate that the employee's blood lead level is at or above 60 ug/100 g of whole blood; and, the employer shall remove an employee from work having an exposure to lead at or above the action level on each occasion that the average of the last three blood sampling tests conducted pursuant to this section (or the average of all blood sampling tests conducted over the previous six (6) months, whichever is longer) indicates that the employee's blood lead level is at or above 50 ug/100 g of whole blood; provided, however, that an employee need not be removed if the last blood sampling test indicates a blood lead level at or below 40 ug/100 g of whole blood. ... The employer shall return an employee to his or her former job status: ... when two consecutive blood sampling tests indicate that the employee's blood lead level is at or below 40 ug/100 g of whole blood. ... The employer shall provide to an employee up to eighteen (18) months of medical removal protection benefits on each occasion that an employee is removed from exposure to lead or otherwise limited pursuant to this section. /Lead, inorganic, as Pb/

Permissible Exposure Limit: The employer shall assure that no employee is exposed to lead at concentrations greater than 50 ug/cu m of air averaged over an 8-hr period. If an employee is exposed to lead for more than 8 hr in any work day, the permissible exposure limit, as a TWA for that day, shall be reduced according to the following formula: Maximum permissible limit (in ug/cu m)=400 divided by the number of hours worked in the day. /Lead, inorganic, as Pb; Shipyard Employment/

The employer shall remove an employee from work having an exposure to lead at or above the action level on each occasion that a periodic and a follow-up blood sampling test conducted pursuant to this section indicate that the employee's blood lead level is at or above 60 ug/100 g of whole blood; and, the employer shall remove an employee from work having an exposure to lead at or above the action level on each occasion that the average of the last three blood sampling tests conducted pursuant to this section (or the average of all blood sampling tests conducted over the previous six (6) months, whichever is longer) indicates that the employee's blood lead level is at or above 50 ug/100 g of whole blood; provided, however, that an employee need not be removed if the last blood sampling test indicates a blood lead level at or below 40 ug/100 g of whole blood. ... The employer shall return an employee to his or her former job status: ... when two consecutive blood sampling tests indicate that the employee's blood lead level is at or below 40 ug/100 g of whole blood. ... The employer shall provide to an employee up to eighteen (18) months of medical removal protection benefits on each occasion that an employee is removed from exposure to lead or otherwise limited pursuant to this section. /Lead, inorganic, as Pb; Shipyard Empolyment/

For more OSHA Standards (Complete) data for LEAD IODIDE (6 total), please visit the HSDB record page.

Reactivity Profile · 1 Eintrag

LEAD IODIDE has weak oxidizing or reducing powers. Redox reactions can however still occur. The majority of compounds in this class are slightly soluble or insoluble in water. If soluble in water, then the solutions are usually neither strongly acidic nor strongly basic. These compounds are not water-reactive. Light sensitive

Atmospheric Standards · 2 Einträge

National primary and secondary ambient air quality standards for lead and its compounds, measured as elemental lead by a reference method based on appendix G to this part, or by an equivalent method, are: 1.5 micrograms per cubic meter, maximum arithmetic mean averaged over a calendar quarter. /Lead and its compounds, as Pb/

Listed as a hazardous air pollutant (HAP) generally known or suspected to cause serious health problems. The Clean Air Act, as amended in 1990, directs EPA to set standards requiring major sources to sharply reduce routine emissions of toxic pollutants. EPA is required to establish and phase in specific performance based standards for all air emission sources that emit one or more of the listed pollutants. Lead compounds are included on this list. /Lead compounds/

Flammable LimitsNon-flammable

Sicherheit und Schutzausrüstung

Fire FightingExcerpt from ERG Guide 151 [Substances - Toxic (Non-Combustible)]:
First AidRemove at once all cases of lead intoxication from further exposure until the blood level is reduced to a safe value; immediately place the individual under medical care.
Exposure Control and Personal ProtectionBiological Exposure Indices (BEI) [ACGIH] - Lead in blood = 200 ug/L (20 ug/100 ml); sampling time not critical; [ACGIH]
Fire Fighting Procedures · 2 Einträge

Use dry chemical, carbon dioxide, water spray, or foam extinguishers ... If material or contaminated runoff enters waterways, notify downstream users of potentially contaminated waters. Notify local health and fire officials and pollution control agencies. From a secure, explosion-proof location, use water spray to cool exposed containers. If cooling streams are ineffective (venting sound increases in volume and pitch, tank discolors or shows any signs of deforming), withdraw immediately to a secure position.

If material on fire or involved in fire: Extingiush fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.)

Storage Conditions · 2 Einträge

Lead iodide must be stored to avoid contact with oxidizers (such as perchlorates, peroxides, permanganates, chlorates, and nitrates) and chemically active metals (such as potassium, sodium, magnesium, and zinc) since violent reactions occur. A regulated, marked area should be established where this chemical is handled, use or stored ...

Protect from light.

Cleanup Methods · 3 Einträge

Evacuate persons not wearing protective equipment from area of spill or leak until clean-up is complete. Remove all ignition sources. Collect powdered material in the most convenient and safe manner and deposit in sealed containers. Ventilate area after clean-up is complete. It may be necessary to contain and dispose of this chemical as a hazardous waste. If material or contaminated runoff enters waterways, notify downstream users of potentially contaminated waters.

Environmental considerations: Land spill: Dig a pit, pond, or lagoon holding area to contain liquid or solid material. /SRP: If time permits, pits, ponds, lagoons, soak holes, or holding areas should be sealed with an impermeable flexible membrane liner./ Cover solids with a plastic sheet to prevent dissolving in rain or fire fighting water.

Environmental consideratons: Water spill: neutralize with agricultural lime (CaO), crushed limestone (CaCO3), or sodium bicarbonate (NaHCO3). If dissolved, in region of 10 ppm or greater concn, apply activated carbon 10 times the spilled amount. Remove trapped material with suction hoses. Use mechanical dredges or lifts to remove immobilized masses of pollutants & precipitates.

Nonfire Spill ResponseExcerpt from ERG Guide 151 [Substances - Toxic (Non-Combustible)]:
Disposal MethodsGenerators of waste (equal to or greater than 100 kg/mo) containing this contaminant, EPA hazardous waste number D008, must conform with USEPA regulations in storage, transportation, treatment and disposal of waste. /Lead/
Preventive Measures · 5 Einträge

If material not on fire and not involved in fire: Keep material out of water sources and sewers. Build dikes to contain flow as necessary.

Personnel protection: Keep upwind. Wear appropriate chemical protective gloves, boots, and goggles. Avoid breathing vapors. Wash away any material which may have contacted the body with copious amounts of water or soap and water.

SRP: Contaminated protective clothing should be segregated in a manner so that results in no direct personal contact by personnel who handle, dispose of, or clean the clothing. Quality assurance procedures to confirm the efficacy of the cleaning procedures should be implemented prior to the decontaminated protective clothing being returned for reuse by the workers. Contaminated clothing (including shoes/socks) should not be taken home at end of shift, but should remain at employee's place of work for cleaning.

SRP: Wastewater from contaminant suppression, cleaning of protective clothing/equipment, or contaminated sites should be contained and evaluated for subject chemical or decomposition product concentrations. Concentrations shall be lower than applicable environmental discharge or disposal criteria. Alternatively, pretreatment and/or discharge to a permitted wastewater treatment facility is acceptable only after review by the governing authority and assurance that "pass through" violations will not occur. Due consideration shall be given to remediation worker exposure (inhalation, dermal and ingestion) as well as fate during treatment, transfer and disposal. If it is not practicable to manage the chemical in this fashion, it must be evaluated in accordance with EPA 40 CFR Part 261, specifically Subpart B, in order to determine the appropriate local, state and federal requirements for disposal.

For more Preventive Measures (Complete) data for LEAD IODIDE (7 total), please visit the HSDB record page.

Isolation and EvacuationExcerpt from ERG Guide 151 [Substances - Toxic (Non-Combustible)]:
Minimum Risk LevelChronic Inhalation: 0.05 mg/m3 (L134)
Threshold Limit Values (TLV) · 5 Einträge

0.05 [mg/m3], as Pb (0.01 ppm, inhalable fraction and vapor (iodides))

8 hr Time Weighted Avg (TWA): 0.05 mg/cu m. /Lead and inorganic compounds, as Pb/

Excursion Limit Recommendation: Excursions in worker exposure levels may exceed 3 times the TLV-TWA for no more than a total of 30 minutes during a work day, and under no circumstances should they exceed 5 times the TLV-TWA, provided that the TLV-TWA is not exceeded. /Lead and inorganic compounds, as Pb/

A3; Confirmed animal carcinogen with unknown relevance to humans. /Lead and inorganic compounds, as Pb/

Biological Exposure Index (BEI): Determinant: lead in blood; Sampling Time: not critical; BEI: 30 ug/100 mL. [Note: Women of child bearing potential, whose blood Pb exceeds 10 ug/dL, are at risk of delivering a child with a blood Pb over the current Centers for Disease Control guideline of 10 ug/dL. If the blood Pb of such children remains elevated, they may be at increased risk of cognitive deficits. The blood Pb of these children should be closely monitored and appropriate steps should be taken to minimize the child's exposure to environmental lead.] /Lead/

Toxikologische Informationen

TreatmentLead poisoning is usually treated with chelation therapy using DMSA, EDTA, or dimercaprol. (L21)
Health Effects · 1 Eintrag

Lead is a neurotoxin and has been known to cause brain damage and reduced cognitive capacity, especially in children. Lead exposure can result in nephropathy, as well as blood disorders such as high blood pressure and anemia. Lead also exhibits reproductive toxicity and can results in miscarriages and reduced sperm production. (L21)

Adverse EffectsNeurotoxin - Predominantly motor
Exposure RoutesOral (L136) ; inhalation (L136); dermal (L136)
Toxicity Summary · 1 Eintrag

Lead mimics other biologically important metals, such as zinc, calcium, and iron, competing as cofactors for many of their respective enzymatic reactions. For example, lead has been shown to competitively inhibit calcium's binding of calmodulin, interferring with neurotransmitter release. It exhibits similar competitive inhibition at the NMDA receptor and protein kinase C, which impairs brain microvascular formation and function, as well as alters the blood-brain barrier. Lead also affects the nervous system by impairing regulation of dopamine synthesis and blocking evoked release of acetylcholine. However, it's main mechanism of action occurs by inhibiting delta-aminolevulinic acid dehydratase, an enzyme vital in the biosynthesis of heme, which is a necesssary cofactor of hemoglobin. (T4, A20, A22, L136)

Ecotoxicity Excerpts · 1 Eintrag

/BIRDS and MAMMALS/ ... Female mallards /were dosed/ with 100 mg lead/kg diet. This was added as a mixture of 43 mg/kg lead carbonate, 37 mg/kg lead oxide, and 49 mg/kg lead sulfate, each salt contributing one-third of the total lead. No significant effect on eggshell thickness was found when it was measured on days 76 and 85 of treatment. When lead was added to the diet along with DDE at 40 mg/kg, lead did not increase the effect of the organochlorine on shell thickness.

Signs and Symptoms · 1 Eintrag

Symptions of chronic lead poisoning include reduced cognitive abilities, nausea, abdominal pain, irritability, insomnia, metal taste in the mouth, excess lethargy or hyperactivity, chest pain, headache and, in extreme cases, seizures, comas, and death. There are also associated gastrointestinal problems, such as constipation, diarrhea, vomiting, poor appetite, weight loss, which are common in acute poisoning. (A2, L21)

Human Toxicity Excerpts · 1 Eintrag

/SIGNS AND SYMPTOMS/ Can cause headache, irritability, reduced memory, and disturbed sleep. Lead poisoning can cause poor appetite, colic, upset stomach, headaches, irritabiity, muscle or joint pains and weakness ... Permanent kidney damage can result from long-term or high exposures. Repeated exposure may cause brain damage and damage to the blood cells, leading to anemia. Higher levels can cause muscle and joint pains, weakness, and fatigue. May cause nerve damage. Lead exposure increases the risk of high blood pressure. Lead Iodide should be handled as a teratogen, with extreme caution. Repeated exposure may cause lead poisoning and/or iodism. Symptoms of iodism can include running nose, headache, mucous membrane irritation, and skin rash.

Carcinogen Classification2A, probably carcinogenic to humans. (L135)
Evidence for Carcinogenicity · 2 Einträge

A3; Confirmed animal carcinogen with unknown relevance to humans. /Lead, elemental, and inorganic compounds, as Pb/ American Conference of Governmental Industrial Hygienists TLVs and BEIs.

Lead, lead compounds: Reasonably anticipated to be a human carcinogen

Probable Routes of Human ExposureNIOSH (NOES Survey 1981-1983) has statistically estimated that 7 workers (none of these were female) were potentially exposed to lead iodide in the US(1).
Antidote and Emergency Treatment · 5 Einträge

Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Lead and related compounds/

Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for shock and treat if necessary ... . Anticipate seizures and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool ... . Administer activated charcoal ... . /Lead and related compounds/

Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious or is in severe respiratory distress. Moderate hyperventilation (20 respiration per minute) may be beneficial for increased intracranial pressure. Start IV administration of 0.9% saline (NS) or lactated Ringer's (LR) /SRP: "To keep open", minimal flow rate/. For hypotension ... . Treat seizures with diazepam or lorazepam ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Lead and related compounds/

Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Iodine and related compounds/

For more Antidote and Emergency Treatment (Complete) data for LEAD IODIDE (9 total), please visit the HSDB record page.

Regulatorische Informationen

RCRA Requirements · 2 Einträge

D008; A solid waste containing lead may or may not become characterized as a hazardous waste when subjected to the Toxicity Characteristic Leaching Procedure listed in 40 CFR 261.24, and if so characterized, must be managed as a hazardous waste. /Lead/

The Environmental Protection Agency is ... /promulgated/ regulations concerning ground-water monitoring with regard to screening suspected contamination at land based hazardous waste treatment, storage, and disposal facilities. ... /There are/ new requirements to analyze for a specified core list of chemicals plus those chemicals specified by the Regional Administrator on a site-specific basis. ... /Total lead (all species) is included on this list./ /Total lead (all species)/

Atmospheric Standards · 2 Einträge

National primary and secondary ambient air quality standards for lead and its compounds, measured as elemental lead by a reference method based on appendix G to this part, or by an equivalent method, are: 1.5 micrograms per cubic meter, maximum arithmetic mean averaged over a calendar quarter. /Lead and its compounds, as Pb/

Listed as a hazardous air pollutant (HAP) generally known or suspected to cause serious health problems. The Clean Air Act, as amended in 1990, directs EPA to set standards requiring major sources to sharply reduce routine emissions of toxic pollutants. EPA is required to establish and phase in specific performance based standards for all air emission sources that emit one or more of the listed pollutants. Lead compounds are included on this list. /Lead compounds/

CERCLA Reportable Quantities · 1 Eintrag

Persons in charge of vessels or facilities are required to notify the National Response Center (NRC) immediately, when there is a release of this designated hazardous substance, in an amount equal to or greater than its reportable quantity of 10 lb or 4.54 kg. The toll free number of the NRC is (800) 424-8802. The rule for determining when notification is required is stated in 40 CFR 302.4 (section IV. D.3.b).

Clean Water Act Requirements · 2 Einträge

Lead iodide is designated as a hazardous substance under section 311(b)(2)(A) of the Federal Water Pollution Control Act and further regulated by the Clean Water Act Amendments of 1977 and 1978. These regulations apply to discharges of this substance. This designation includes any isomers and hydrates, as well as any solutions and mixtures containing this substance.

Toxic pollutant designated pursuant to section 307(a)(1) of the Federal Water Pollution Control Act and is subject to effluent limitations. /Lead and compounds/

State Drinking Water Standards(AZ) ARIZONA 50 ug/L /Lead/
State Drinking Water Guidelines · 2 Einträge

(AZ) ARIZONA 20 ug/L /Lead/

(ME) MAINE 10 ug/L /Lead/

Federal Drinking Water StandardsEPA 15 ug/L (Action Level) /Lead/

Sicherheitsdaten

F
8
wgk
3
tsca
TSCA listed
ridadr
UN 2291 6.1/PG 3
hs_code
28276000
risk_code
61-20/22-33-50/53-62
hazard_code
T,N
safety_code
53-45-60-61
hazard_class
6.1
packing_group
III
Speicherklasse
6.1C - Combustible acute toxic Cat.3toxic compounds or compounds which causing chronic effects
Giftige Stoffe Daten
10101-63-0(Hazardous Substances Data)
Hazard Classifications
Acute Tox. 4 InhalationAcute Tox. 4 OralAquatic Acute 1Aquatic Chronic 1Repr. 1ASTOT RE 2
Darstellung · 1 Eintrag

synthetischeLead diiodide is prepared by mixing aqueous solutions of lead nitrate or lead acetate with an aqueous solution of potassium or sodium iodide or hydriodic acid, followed by crystallization. The product is purified by recrystallization. Pb2+(aq) + 2Iˉ (aq) → PbI2(s).

Vor- und nachgelagerte Produkte

Vorgelagerte Rohstoffe

KaliumiodidLead acetate trihydrate