12135-76-1[NH4+].[NH4+].[S-2]UYJXRRSPUVSSMN-UHFFFAOYSA-PAmmonium sulfide aqueous solution is a colorless to yellow liquid, with an odor of rotten eggs or ammonia. Can slowly react with water to generate flammable and toxic hydrogen sulfide gas. This reaction is much faster with acid. It may be irritating to skin, eyes and mucous membranes and may cause illness from skin absorption. It may burn and/or emit toxic fumes if heated to high temperatures.
12135-76-1DTXSID60893218Other Classes -> Sulfur Compounds
Corrosives
0.99 to 1.01 at 68 °F (USCG, 1999)
1 g/mL at 25 °C /Ammonium sulfide solution/
Yellow-orange crystals.
Compound is found as colorless to yellow crystals below -18 °C or as yellow-orange crystals
Soluble in water
Soluble in ethanol, alkalies
72 °F (USCG, 1999)
72 °C (Closed cup)
Sicherheitsangaben dienen nur zur Orientierung und ersetzen weder das Sicherheitsdatenblatt (SDB) des Lieferanten noch geltende Vorschriften oder eine fachliche Bewertung.
Danger
H314 (100%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]
P260, P264, P280, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P316, P321, P363, P405, and P501 (click each P-code to see the statement)
Aggregated GHS information provided per 1451 reports by companies from 12 notifications to the ECHA C&L Inventory.
Danger
H301: Toxic if swallowed [Danger Acute toxicity, oral]
Chemical: Ammonium sulfide ((NH4)2S)
Commission Regulation (EC) No 1565/2000 (Repealed by Com. Implementing Reg. (EU) No 872/2012)
Ammonium sulfide ((NH4)2S) is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Ammonium sulfide ((NH4)2S) are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)
REACH registered substance: Ammonium sulphide (EC: 235-223-4)
Restricted substance: Ammonium sulphide
Ammonium sulfide: HSNO Approval: HSR004346 Approved with controls
Special Hazards of Combustion Products: Toxic hydrogen sulfide gas is released when solution is heated. If ignited, this will form irritating sulfur dioxide gas. (USCG, 1999)
· Flammable/combustible material.
Alkali sulfides are rapidly absorbed from intestine. It is doubtful whether skin absorbs enough to cause systemic poisoning. The sulfide radical is in part excreted by lung & kidneys & metallic sulfides (as iron sulfide) by bowel, & in part oxidized to sulfate & thiosulfate & excreted by kidneys. /Sulfides/
First acid dissociation constant of hydrogen sulfide is about 1x10(-7) molar so that in body fluids dissociated & undissociated hydrogen sulfide exist in about equal proportions. Undissociated acid, however, penetrates biological membranes more rapidly than the hydrosulfide anion. /Hydrogen sulfide/
Used to apply patina to bronze, for iron control in soda ash production, and to make ammonium thiosulfite; Also used in trace metal analysis, photographic developers, metallurgy, textiles, synthetic flavors, and cold wave sets; [HSDB] Used to make surfactants and photocopy paper; [EPA OHM/TADS]
Textiles (Fiber & Fabric Manufacturing) [Category: Industry]
Applying metallic patinas [Category: Hobbies]
To apply patina to bronze, and in trace metal analysis
In certain "cold wave sets"
Photography (developers), coloring brasses, bronzes, iron control in soda ash production, synthetic flavors
2023: 10,000,000 - <25,000,000 lb
Production volume for non-confidential chemicals reported under the 2006 Inventory Update Rule. Chemical: Ammonium sulfide. Aggregated National Production Volume: 10 to < 50 million pounds.
Non-confidential 2012 Chemical Data Reporting (CDR) information on the production and use of chemicals manufactured or imported into the United States. Chemical: Ammonium sulfide. National Production Volume: 24,978,308 lb/yr.
Keine Reaktionsaufzeichnungen unter den aktuellen Filterkriterien.
Wird geladen…
104 °F at 760 mmHg (USCG, 1999)
40 °C /Ammonium sulfide solution/
104 °C @760 [mm Hg]
At high temps decomposes into ammonium bisulfite, ammonia and polysulfides
Decomposes at melting point
When heated to decomposition ... emits highly toxic fumes of /sulfur oxides/. /Sulfides/
Inhalation of 500 ppm for 30 min. produces headaches, dizziness, bronchial pneumonia; 600 ppm for 30 min. can cause death. Ingestion causes severe irritation of mucous membranes and stomach. Contact with liquid causes severe burns of eyes and severe skin irritation. May be absorbed through skin and cause hydrogen sulfide poisoning. (USCG, 1999)
· May cause toxic effects if inhaled or ingested.
A strong skin and mucous membrane irritant; May cause serious eye injury; Inhalation may result in dizziness and bronchial pneumonia (500 ppm for 30 min) and death (600 ppm for 30 min); Skin absorption may result in hydrogen sulfide poisoning; Deaths have been reported following application of permanent wave solution; Emergency treatment: Corrosives- alkaline; [HSDB] Readily oxidized to ignite spontaneously in air; Decomposed slowly by moisture evolving the flammable gas hydrogen sulfide; A severe skin irritant; Can cause severe burns to eyes; [CAMEO] Commercially available as 40-44% aqueous solution (known as ammonium hydrosulfide or ammonium sulfhydrate solution); Quickly decomposes evolving ammonia; A skin irritant; [EPA OHM/TADS] A corrosive substance that can cause injury to the skin, eyes, and respiratory tract; Inhalation may cause chemical pneumonitis; [Alfa Aesar MSDS]
Ammonium sulfide is a food additive permitted for direct addition to food for human consumption, as long as 1) the quantity added to food does not exceed the amount reasonably required to accomplish its intended physical, nutritive, or other technical effect in food, and 2) when intended for use in or on food it is of appropriate food grade and is prepared and handled as a food ingredient.
AMMONIUM SULFIDE, SOLUTION is a strongly alkaline aqueous solution. Reacts with acids to generate toxic and flammable gaseous hydrogen sulfide. Reacts with bases to release gaseous ammonia. May react vigorously with oxidizing agents, including inorganic oxoacids, organic peroxides and epoxides. Special Hazards of Combustion Products: Toxic hydrogen sulfide gas is released when solution is heated. If ignited, this will form irritating sulfur dioxide gas (USCG, 1999).
· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.
· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.
Get medical attention following all overexposures to this compound.
General First Aid:
Extinguish with water, dry chemicals or carbon dioxide.
Do not extinguish fire unless flow can be stopped or safely confined. Use water in flooding quantitites as fog. Solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use "alcohol" foam, dry chemical, or carbon dioxide.
Separation process which combines liq membrane permeation & conventional steam stripping, effectively removed (NH4)2S from wastewater.
Refinery sour water containing 500-15000 ppm ammonium sulfide is mixed with hydrocarbon emulsion at top of stripping tower at 185 °F & steam is simultaneously passed into bottom of tower. Ammonia is removed with emulsion & hydrogen sulfide is stripped by steam.
Collect and remove with a broom into a large bucket. Dilute with water and neutralize with 6M hydrogen chloride. Drain into a sewer with sufficient water.
Land spill: Dig a pit, pond, lagoon, holding area to contain liquid or solid material. Dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete. Absorb bulk liquid with fly ash or cement powder.
For more Cleanup Methods (Complete) data for DIAMMONIUM SULFIDE (6 total), please visit the HSDB record page.
Stay upwind. Use water spray to knock down vapor.
Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Do not handle broken packages unless wearing appropriate personal protective equipment.
Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]:
Immediate precautionary measure
0.51 [ppm]
27 [ppm]
50 [ppm]
LC50; Species: Cyprinus carpio (Common carp) fry, weight 23.6 g; Conditions: freshwater, renewal, 10.4 (9.1-11.9) °C, pH 9.2 (8.7-9.5), dissolved oxygen 9.5 mg/L (9.4-9.6 mg/L); Concentration: 6600 ug/L for 48 hr (95% confidence interval: 5700-7600 ug/L)
LC50; Species: Gambusia affinis (Western mosquitofish) adult; Conditions: freshwater, static, 21 °C, pH 7.0-8.8; Concentration: 248000 ug/L for 24, 48, 96 hr
TLm Mosquito fish 248 ppm/48 hr fresh water. /Conditions of bioassay not specified/
/SIGNS AND SYMPTOMS/ /It/ manifests ... on all mucous membranes causing conjunctivitis, palpebral edema, keratitis, photophobia & defects of cornea resulting in foggy vision & perception of color rings around lights. It causes ... rhinitis, tracheitis, bronchitis ... & greenish cyanosis. Exposure to high concn results in sudden collapse, convulsions, and death from resp paralysis. With less severe exposure there may be nausea & vomiting & resp becomes depressed. Reactions may be associated with or followed by somnolence, amnesia, unconsciousness, delirium, & hallucinations. The patient may have dysphagia, tachycardia, hypotension, and the urine may contain albumin, casts, and a few red blood cells. The pupils are nonreactive, and there may be strabismus, diplopia, and exophthalmos. The acute poisoning may be followed by bronchitis or pneumonia, bradycardia, myocarditis, cardiac dilatation, peripheral ... /SRP: neuropathy/ and gastrointestinal disturbances. Chronic exposure to low concentrations may cause headache, irritability, insomnia, bradycardia, loss of appetite, nausea, and vomiting. /Sulfides & deriv/
/SIGNS AND SYMPTOMS/ Inhalation of 500 ppm for 30 min produces headaches, dizziness, bronchial pneumonia; 600 ppm for 30 min can cause death. Ingestion causes severe irritation of mucous membranes and stomach. Contact with liquid causes severe burns of eyes & severe skin irritation. May be absorbed through skin & cause hydrogen sulfide poisoning.
/OTHER TOXICITY INFORMATION/ Several deaths have followed application of ammonium sulfide permanent wave soln ... .
/OTHER TOXICITY INFORMATION/ If free gastric acidity is high, the ingestion of these salts may result in their decomp to hydrogen sulfide in stomach with subsequent systemic poisoning. /Alkaline sulfide salts/
/LABORATORY ANIMALS: Acute Exposure/ In addition to increased ventilation, small parenteral doses of sulfide in lab animals produce fleeting rise followed by profound (perhaps irreversible) fall in blood pressure. Death ... is invariably result of central resp paralysis. /Hydrogen sulfide/
According to the 2006 TSCA Inventory Update Reporting data, the number of persons reasonably likely to be exposed in the industrial manufacturing, processing, and use of diammonium sulfide is 1000; the data may be greatly underestimated(1).
NIOSH (NOES Survey 1981-1983) has statistically estimated that 4,271 workers (1,482 of these were female) were potentially exposed to diammonium sulfide in the US(1). Occupational exposure to diammonium sulfide may occur through inhalation and dermal contact with this compound at workplaces where diammonium sulfide is produced or used. Use data indicate that the general population may be exposed to diammonium sulfide via ingestion of food and dermal contact with consumer products containing diammonium sulfide(SRC).
Emergency and supportive measures: NOTE: Rescuers should use self-contained breathing apparatus to prevent personal exposure. Maintain on open airway and assist ventilation if necessary. Administer high-flow humidified supplemental oxygen. Observe for several hours for delayed-onset chemical pneumonia or pulmonary edema. Treat coma, seizures, and hypotension if they occur. /Hydrogen sulfide/
Decontamination. Remove the victim from exposure and give supplemental oxygen, if available. /Hydrogen sulfide/
Enhanced elimination. There is no role for enhanced elimination procedures. Although hyperbaric oxygen therapy has been promoted for treatment of hydrogen sulfide poisoning, this is based on anecdotal cases, and there is no convincing rationale or scientific evidence for its effectiveness. /Hydrogen sulfide/
Inhalation of corrosive gases (eg, chlorine and ammonia) may cause upper respiratory tract injury, with stridor, hoarseness, wheezing, and noncardiogenic pulmonary edema. Pulmonary symptoms may be delayed after exposure to gases with low water solubility (eg, nitrogen dioxide and phosgene). /Caustic and corrosive agents/
For more Antidote and Emergency Treatment (Complete) data for DIAMMONIUM SULFIDE (6 total), please visit the HSDB record page.
Ammonium sulfide is a food additive permitted for direct addition to food for human consumption, as long as 1) the quantity added to food does not exceed the amount reasonably required to accomplish its intended physical, nutritive, or other technical effect in food, and 2) when intended for use in or on food it is of appropriate food grade and is prepared and handled as a food ingredient.
Persons in charge of vessels or facilities are required to notify the National Response Center (NRC) immediately, when there is a release of this designated hazardous substance, in an amount equal to or greater than its reportable quantity of 100 lb or 45.4 kg. The toll free number of the NRC is (800) 424-8802. The rule for determining when notification is required is stated in 40 CFR 302.4 (section IV. D.3.b).
Ammonium sulfide is designated as a hazardous substance under section 311(b)(2)(A) of the Federal Water Pollution Control Act and further regulated by the Clean Water Act Amendments of 1977 and 1978. These regulations apply to discharges of this substance. This designation includes any isomers and hydrates, as well as any solutions and mixtures containing this substance.
Grades: Technical; CP; Liquid, 40-44%. /Ammonium sulfide/
Solid ammonium sulfide decomposes to ammonia and ammonium hydrosulfide at about -18 °C; consequently it is normally marketed as a 40-44% aqueous solution.
Petroleum Refineries
Ammonium sulfide ((NH4)2S): ACTIVE
The ammonium sulfide of commerce is largely ammonium bisulfide or hydrosulfide, NH4HS.
A game repellent containing 40-44% ammonium sulfide protected Douglas fir nurseries against deer damage.
Removal of heavy metals from wastewater.
VerwendenAmmonium sulfide solution is used occasionally in photographic developing, to apply patina to bronze, and in textile manufacturing. Ammonium sulfide is a very useful reagent in mineral analysis. Used in continuous culture of saccharomyces cerevisiae, useful in a double staining technique for visualization of astrocytes and microglia from brain sections and astroglial cell cultures. It plays an important role to modify the surface of low κ dielectric thin films. It is essential for molecular beam epitaxy regrowth. It is an unstable salt and acts as a selective reducing agent.