| GHS-Einstufung | DangerH301: Toxic if swallowed [Danger Acute toxicity, oral]H311: Toxic in contact with skin [Danger Acute toxicity, dermal]H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]P260, P262, P264, P270, P280, P301+P316, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P321, P330, P361+P364, P363, P405, and P501 (click each P-code to see the statement) |
|---|
| Regulatorische Informationen | Chemical: Phenol, 3-methyl-Hazard Traits - Musculoskeletal ToxicityNeurotoxicityRespiratory ToxicityAuthoritative List - CA TACsIRIS NeurotoxicantsReport - if used as a fragrance or flavor ingredientCommission Regulation (EC) No 1565/2000 (Repealed by Com. Implementing Reg. (EU) No 872/2012)Phenol, 3-methyl- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Phenol, 3-methyl- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)Status: Active Update: 03-05-2023 https://echa.europa.eu/registration-dossier/-/registered-dossier/141103-Cresol: HSNO Approval: HSR003581 Approved with controls |
|---|
| Weitere Sicherheitsinformationen | IMAP assessments - Phenol, 3-methyl-: Environment tier I assessmentIMAP assessments - Methylphenols (Cresols): Human health tier II assessment |
|---|
| DOT-Kennzeichnung | Poison Corrosive |
|---|
| Brandgefahren | Special Hazards of Combustion Products: Emits highly toxic fumes.Behavior in Fire: Vapor may form explosive mixture with air. (USCG, 1999)Combustible. Gives off irritating or toxic fumes (or gases) in a fire. Above 86 °C explosive vapour/air mixtures may be formed. |
|---|
| Brandpotenzial | Flammable when exposed to /SRP66: spark/ heat, flames, or oxidants.Combustible liquid |
|---|
| Gesundheitsgefahren | INHALATION: Mucosal irritation and systemic poisoning EYES: Intense irritation and pain, swelling of conjunctiva, and corneal damage may occur. SKIN: Intense burning, loss of feeling, wrinkling, white discoloration, and softening. Gangrene may occur. INGESTION: Burning sensation in mouth and esophagus. Vomiting may result. Acute exposure by all routes may cause muscular weakness, gastroenteric disturbances, severe depression, collapse. Effects are primarily on CNS and edema of lungs. Injury of spleen and pancreas may occur. (USCG, 1999) |
|---|
| Gefahrenübersicht | Causes burnsInhalation may cause pulmonary edemaExposure may cause CNS depression and hemolytic anemiaCan be absorbed through skin[ICSC] May cause second degree burns after a few minutes contactMay cause liver and kidney injury[CHRIS] Least toxic of the three cresol isomersMay cause skin sensitization[HSDB] No evidence of skin sensitization in limited studies of humans and guinea pigs using p-cresol and m-/p-cresolA survey reports hypersensitivity reactions of certain individuals to cresol (unspecified isomer)Neither isomer produced mortality or clinical signs of toxicity following exposure to saturated vapor concentrations, although inhalation of aerosols may be fatal[OECD SIDS: m-/p-Cresol Category - 2003] Safe when used as a flavoring agent in food[JECFA] Causes burnsInhalation may cause corrosive injuries to upper respiratory tract and lungsToxic by ingestion and skin absorptionTargets the CNS, lungs, liver, kidney, and eyes[Sigma-Aldrich MSDS] See Cresol, all isomers.The major hazards encountered in the use and handling of m-cresol stem from its toxicologic properties. Toxic by all routes (ie, inhalation, ingestion, and dermal absorption), exposure to this colorless to yellowish, tar-smelling, liquid may occur from its use as a chemical intermediate in the production of fumigants, photographic developers, explosives, resins, herbicides, and disinfectants. Effects from exposure may include headache, nausea, dizziness, contact burns to skin and eyes, ventricular arrhythmias, pulmonary edema, seizures, coma, and death. Both the OSHA PEL and the ACGIH TLV have been set at a TWA of 5 ppm. In activities or situations where over exposure may occur, wear a self-contained breathing apparatus and full chemical protective clothing which is specifically recommended by the shipper or producer to prevent skin contact with m-cresol. If contact should occur, immediately flush affected skin or eyes with running water for at least 15 minutes, and remove contaminated clothing and shoes at the site. Eyewash and quick drench facilities should be readily available in m-cresol work areas. While m-cresol does not ignite easily, it can burn with the production of irritating and poisonous gases. Also, containers of m-cresol can explode violently in the heat of a fire. Fires involving m-cresol may be extinguished with dry chemical, CO2, Halon, or standard foam. Water spray, if used, should be applied with caution because it may cause frothing. Fight the fire from a maximum distance and dike runoff from fire control water. m-Cresol should be stored in iron or steel containers, in cool, well-ventilated areas, away from oxidizing materials, and sources of ignition and physical damage. m-Cresol may be shipped via air, rail, road, and water. Small spills of m-cresol may be taken up with sand or other noncombustible absorbent and placed into containers for later disposal. Large spills on land should be contained in excavated pits or other holding areas that are |
|---|
| DOT-Nummer und Handbuch | 2076 153 |
|---|
| Reaktive Gruppe | Phenols and Cresols |
|---|
| EG-Einstufung | Symbol: T, CR: 24/25-34S: (1/2)-36/37/39-45Note: C |
|---|
| UN-Einstufung | UN Hazard Class: 6.1UN Subsidiary Risks: 8UN Pack Group: II |
|---|
| Special Reports | HHS/ATSDRToxicological Profile for Cresols PB2009-100002 (September 2008). The ATSDR toxicological profile succinctly characterizes the toxicologic and adverse health effects information for the hazardous substance described here. Each peer-reviewed profile identifies and reviews the key literature that describes a hazardous substance's toxicologic properties. Other pertinent literature is also presented, but is described in less detail than the key studies.[Available from, as of March 18, 2015: http://www.atsdr.cdc.gov/toxprofiles/index.asp]Gordon PAir Pollution Assessment of CresolsUS NTIS, PB rep: 1-76 pP (1976) pb-256737. The toxic effects & removal of cresol from waste gases are discussed.NIOSHCriteria Document: Cresol (1978) DHEW Pub. NIOSH 78-133USEPA/ECAOHealth and Environmental Effects Profile: Cresols (1985) ECAO-CIN-P138For more Special Reports (Complete) data for m-CRESOL (14 total), please visit the HSDB record page. |
|---|
| Brandbekämpfung | Fire Extinguishing Agents: CO2, dry chemical, foam, water spray. (USCG, 1999)Use water spray, foam, powder, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water. |
|---|
| Erste-Hilfe-Maßnahmen | Fresh air, rest. Half-upright position. Artificial respiration may be needed. Refer immediately for medical attention.Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer immediately for medical attention.Rinse with plenty of water (remove contact lenses if easily possible). Refer immediately for medical attention.Rinse mouth. Do NOT induce vomiting. Refer immediately for medical attention. |
|---|
| Erste Hilfe | EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.INHALATION: IMMEDIATELY leave the contaminated areatake deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be usedif not available, use a level of protection greater than or equal to that advised under Protective Clothing.INGESTION: DO NOT INDUCE VOMITING. Phenols are very toxic poisons AND corrosive and irritating, so that inducing vomiting may make medical problems worse. IMMEDIATELY call a hospital or poison control center and locate activated charcoal, egg whites, or milk in case the medical advisor recommends administering one of them. If advice from a physician is not readily available and the victim is conscious and not convulsing, give the victim a glass of activated charcoal slurry in water or, if this is not available, a glass of milk, or beaten egg whites and IMMEDIATELY transport victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, assure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)(General first aid procedures)Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.Skin: Soap wash immediately - If this chemical contacts the skin, immediately wash the contaminated skin with soap and water. If this chemical penetrates the clothing, immediately remove the clothing, wash the skin with soap and water, and get medical attention promptly.Breathing: Respiratory supportSwallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. |
|---|
| Sichere Lagerung | Separated from strong oxidants and food and feedstuffs. Ventilation along the floor. Store in an area without drain or sewer access. Provision to contain effluent from fire extinguishing. |
|---|
| Firefighting Hazards | ...Vapors will seek out low-lying areas where they can accumulate.Sealed closed containers can build up pressure if exposed to heat (fire). |
|---|
| Brandbekämpfungsverfahren | Wear goggles & self-contained breathing apparatus.Use water spray, dry chemical, foam, or carbon dioxide. Use water spray to keep fire-exposed containers cool.Water may be used to blanket fire.If material on fire or involved in fire: Use water in flooding quantities as fog. Solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use foam, dry chemical, or carbon dioxide. Use water spray to knock-down vapors.For more Fire Fighting Procedures (Complete) data for m-CRESOL (6 total), please visit the HSDB record page. |
|---|
| Lagerbedingungen | Keep container tightly closed in a dry and well-ventilated place.Containers which are opened must be carefully resealed and kept upright to prevent leakage.Avoid loading together with explosives, oxidizing materials and organic peroxides.Store in a cool, dry, well ventilated location. Separate from oxidizing materials.All bulk containers that hold cresol shall carry, in a readily visible location, a label that bears the trade name of the product, if appropriate, and information on the effects of exposure to the compound on human health.Cresol should be stored in iron or steel containers, properly labelled. |
|---|
| Reinigungsverfahren | Accidental release measures. Personal precautions, protective equipment and emergency procedures: Wear respiratory protection. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapors accumulating to form explosive concentrations. Vapors can accumulate in low areas.Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.Methods and materials for containment and cleaning up: Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations ... Keep in suitable, closed containers for disposal.Environmental considerations - Air spill: Apply water spray or mist to knock down vapors. Vapor knockdown water is corrosive or toxic and should be diked for containment.Environmental considerations - Water spill: Use natural deep water pockets, excavated lagoons, or sand bag barriers to trap material at bottom. If dissolved, in region of 10 ppm or greater concentration, apply activated carbon at ten times the spilled amount. Use mechanical dredges or lifts to remove immobilized masses of pollutants and precipitates.Environmental considerations - Land spill: Dig a pit, pond, lagoon, or holding area to contain liquid or solid material. /SRP: If time permits, pits, ponds, lagoons, soak holes, or holding areas should be sealed with an impermeable flexible membrane liner./ Dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete. Absorb bulk liquid with fly ash, cement powder, or commercial sorbents.For more Cleanup Methods (Complete) data for m-CRESOL (6 total), please visit the HSDB record page. |
|---|
| Freisetung ohne Brand | SMALL SPILLS AND LEAKAGE: If you spill this chemical, FIRST REMOVE ALL SOURCES OF IGNITION. Then, use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.STORAGE PRECAUTIONS: You should protect this chemical from exposure to light. Keep the container tightly closed under an inert atmosphere, and store under refrigerated temperatures. (NTP, 1992) |
|---|
| Entsorgungsverfahren | Generators of waste (equal to or greater than 100 kg/mo) containing this contaminant, EPA hazardous waste numbers F004, U052 and D024, must conform with USEPA regulations in storage, transportation, treatment and disposal of waste.This combustible material may be burned in a chemical incinerator equipped with an afterburner and scrubber. Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material.Contaminated packaging: Dispose of as unused product.Chemical Treatability of m-CresolConcentration Process: Biological TreatmentChemical Classification: PhenolsScale of Study: UnknownType of Wastewater Used: Pure (one solute in a solvent)Results of Study: 96% reduction based on chemical oxygen demandrate of biodegradation 55 mg chemical oxygen demand/g hr. (Activated sludge process).For more Disposal Methods (Complete) data for m-CRESOL (6 total), please visit the HSDB record page. |
|---|
| Verschüttetes entsorgen | Personal protection: chemical protection suit and filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Collect leaking liquid in sealable containers. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. Do NOT let this chemical enter the environment. |
|---|
| Preventive Measures | Avoid contact with skin and eyes. Avoid inhalation of vapor or mist. Keep away from sources of ignition - No smoking. Take measures to prevent the build up of electrostatic charge.Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.The worker should immediately wash the skin when it becomes contaminated.For more Preventive Measures (Complete) data for m-CRESOL (12 total), please visit the HSDB record page. |
|---|
| Körperbelastung | Urine of 10 men exposed to approx 200 ppm toluene in the air for 4 hr: urinary m-cresol concn was <0.2 mg/L, mean before exposure0.599 mg/L, mean 4 hr after exposure(1). |
|---|
| Treatment | If the compound has been ingested, rapid gastric lavage should be performed using 5% sodium bicarbonate. For skin contact, the skin should be washed with soap and water. If the compound has entered the eyes, they should be washed with large quantities of isotonic saline or water. In serious cases, atropine and/or pralidoxime should be administered. Anti-cholinergic drugs work to counteract the effects of excess acetylcholine and reactivate AChE. Atropine can be used as an antidote in conjunction with pralidoxime or other pyridinium oximes (such as trimedoxime or obidoxime), though the use of '-oximes' has been found to be of no benefit, or possibly harmful, in at least two meta-analyses. Atropine is a muscarinic antagonist, and thus blocks the action of acetylcholine peripherally. |
|---|
| Wechselwirkungen | Female Sutter mice (27 to 29/group) were dosed with a single application of dimethylbenzanthracene followed 1 wk later by 25 uL of a 20% solution of m-cresol in benzene twice weekly for 12 wk. Benzene-treated controls did not experience mortality, although many of the cresol-treated mice died. m-Cresol produced 7/17 tumors (papillomas) in surviving mice.Mice were given a single dermal application of 9,10-dimethyl-1,2-benzanthracene (DMBA), a cancer initiator, followed by application of 20% solutions of o-, p-, or m-cresol in benzene twice a week for 12 weeks. This level of cresols exposure proved to be acutely toxic, producing relatively high nontumor-related mortality. Consequently, all tumor results were based on number of survivors (14-20 per group). Promotion with cresols led to increases in the average number of skin papillomas per mouse and the percentage of exposed mice with at least one papilloma. o-Cresol was the most potent isomer, and p-cresol the least. Carcinomas were not observed following cresols exposure, although the observed papillomas have the potential to develop into carcinomas. A problem with the study was use of benzene, a known carcinogen, as the solvent for the cresols. However, benzene controls in the cresols experiment did not develop papillomas, and neither did benzene controls in four parallel series of experiments (a few papillomas were observed in a fifth benzene control group). Therefore, the results of this study showing that all three cresol isomers are capable of promoting skin tumors initiated by DMBA appear to be valid.In this study we found that insulin mixed with m-cresol, normally used as pharmaceutical preparation, shows an earlier and larger stimulating effect on transepithelial sodium transport than insulin alone. The action displayed by the m-cresol seems to be specific for insulin because m-cresol mixed with ADH, a hormone known to stimulate sodium transport, failed to show the potentiation seen for insulin. It is proposed that m-cresol could facilitate the interaction with its receptor by modifying the insulin molecule. |
|---|
| Zielorgane | NervousEyes, skin, respiratory system, central nervous system, liver, kidneys, pancreas, cardiovascular system |
|---|
| Gesundheitliche Auswirkungen | Acute exposure to cholinesterase inhibitors can cause a cholinergic crisis characterized by severe nausea/vomiting, salivation, sweating, bradycardia, hypotension, collapse, and convulsions. Increasing muscle weakness is a possibility and may result in death if respiratory muscles are involved. Accumulation of ACh at motor nerves causes overstimulation of nicotinic expression at the neuromuscular junction. When this occurs symptoms such as muscle weakness, fatigue, muscle cramps, fasciculation, and paralysis can be seen. When there is an accumulation of ACh at autonomic ganglia this causes overstimulation of nicotinic expression in the sympathetic system. Symptoms associated with this are hypertension, and hypoglycemia. Overstimulation of nicotinic acetylcholine receptors in the central nervous system, due to accumulation of ACh, results in anxiety, headache, convulsions, ataxia, depression of respiration and circulation, tremor, general weakness, and potentially coma. When there is expression of muscarinic overstimulation due to excess acetylcholine at muscarinic acetylcholine receptors symptoms of visual disturbances, tightness in chest, wheezing due to bronchoconstriction, increased bronchial secretions, increased salivation, lacrimation, sweating, peristalsis, and urination can occur. Certain reproductive effects in fertility, growth, and development for males and females have been linked specifically to organophosphate pesticide exposure. Most of the research on reproductive effects has been conducted on farmers working with pesticides and insecticdes in rural areas. In females menstrual cycle disturbances, longer pregnancies, spontaneous abortions, stillbirths, and some developmental effects in offspring have been linked to organophosphate pesticide exposure. Prenatal exposure has been linked to impaired fetal growth and development. Neurotoxic effects have also been linked to poisoning with OP pesticides causing four neurotoxic effects in humans: cholinergi |
|---|
| Ökotoxizitätswerte | LC50Species: /Lepomis macrochirus/ (Bluegill)Concentration: 10 mg/L for 96 hr /Conditions of bioassay not specified in source examined/EC50Species: Daphnia magna (Water flea)Conditions: staticConcentration: 0.178 mmol/L for 24 hr (95% confidence limit: 0.148-0.208 mmol/L)Effect: intoxication, immobilization /formulated product/Species: Daphnia magna (Water Flea) age <24 hr neonateConditions: freshwater, static, pH 8.2, hardness 170 mg/L CaCO3, alkalinity 110 mg/L CaCO3Concentration: 18000 ug/L for 24 hrSpecies: Oncorhynchus mykiss (Rainbow Trout) fry, weight 0.78 g, length 4.6 cmConditions: freshwater, static, 14 °C, pH 7.92 (6.60-8.20), dissolved oxygen 7.21 mg/L (6.1-7.6 mg/L)Concentration: 8130 ug/L for 24 hr /formulation/For more Ecotoxicity Values (Complete) data for m-CRESOL (11 total), please visit the HSDB record page. |
|---|
| Umweltverhalten | TERRESTRIAL FATE: Based on a classification scheme(1), a m-cresol Koc value of 34.58 in a clay loam soil(2) and a cresol Koc range of 27-251 in five different soils (para-isomer)(3) indicate that m-cresol is expected to have very high to moderate mobility in soil(SRC). Volatilization of m-cresol from moist soil surfaces may occur slowly(SRC) given a Henry's Law constant of 8.6X10-7 atm-cu m/mole(4). m-Cresol may volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.11 mm Hg at 25 °C(5). Based upon available test results, including OECD screening methods, m-cresol can be considered as being readily biodegradable under aerobic conditions(6). m-Cresol is expected to biodegrade readily in soils based on biodegradation half-lives of 0.6 and 11.3 days reported for 2 agricultural soils(7).AQUATIC FATE: Based on a classification scheme(1), a m-cresol Koc value of 34.58 in a clay loam soil(2) and a cresol Koc range of 27-251 in five different soils (para-isomer)(3) indicate that m-cresol is not expected to adsorb to suspended solids and sediment in water(SRC). Volatilization from water surfaces is expected to occur slowly(4) based upon a Henry's Law constant of 8.56X10-7 atm-cu m/mole(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 45 and 327 days, respectively(SRC). According to a classification scheme(6), BCF values of 20 and 10.7 reported for m-cresol in golden ide fish (Leuciscus idus melanotus)(7) and zebrafish (Danio rerio)(8), respectively, suggest that bioconcentration in aquatic organisms is low. Based upon available test results, including OECD screening methods, m-cresol can be considered as being readily biodegradable under aerobic conditions(7). Aerobic biodegradation is considered to be the major removal mechanism for m-cresol in the hydrosphere(7). m-Cresol is expected to biodegrade in water based on reported half-lives in the range of 2 to 29 days (aerobic water) and 15 to 49 days (anaerobic water)(9). m-Cresol is a phenol and phenols in surface waters exposed to sunlight react with photo-oxidants (such as hydroxyl radicals, peroxy radicals and singlet oxygen) with a half-life on the order of 13 days(10). m-Cresol is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(4).ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), m-cresol, which has a vapor pressure of 0.11 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase m-cresol is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC)the half-life for this reaction in air is estimated to be 6 hours(SRC) from its rate constant of 5.88X10-11 cu cm/molecule-sec at 21 °C(3). Vapor-phase m-cresol is also degraded in the atmosphere by reaction with nitrate radicals(SRC)the half-life for this reaction in air is estimated to be 4 minutes(SRC) from its rate constant of 1.21X10-11 cu cm/molecule-sec at 25 °C(3). The nitrate radical is the dominant atmospheric oxidant during the night-time in most atmospheric environments(4), therefore, night-time degradation appears to be a major atmospheric loss process for m-cresol(SRC). m-Cresol absorbs at wavelengths >290 nm(5) and, therefore, may be susceptible to direct photolysis by sunlight(SRC). m-Cresol has been detected in rain water(6,7) indicating it may be removed from the air by wet deposition(SRC). |
|---|
| Lebensmitteluntersuchungswerte | m-Cresol has been identified, not quantified, in the volatiles of cooked pork(1). Unspecified cresol isomers were detected in various brands of Scotch whiskey, whiskeys made outside of Scotland, cognac, armagnac, brandy other than cognac and armagnac, and white and dark rums at concentrations ranging from 0.01 to 0.20 ppm, 0.01 to 0.07 ppm, trace to 0.02 ppm, trace to 0.02 ppm, trace to 0.02 ppm, and trace to 0.20 ppm, respectively(2). m-Cresol was detected in the volatiles of Rambutan Fruit (Nephelium lappaceum L.) and in the concentrated juice at a level of 5.65 ug/L(3). m-Cresol is reportedly found in roasted barley, butter, can molasses, coconut oil, coffee, egg, roasted filberts, smoked fish, smoked herring, yellow passion fruit, mango, rum, hydrolyzed soy protein, Parmesan cheese, black tea, green tea, cognac and wine(4). |
|---|
| Unerwünschte Wirkungen | Occupational hepatotoxin - Secondary hepatotoxins: the potential for toxic effect in the occupational setting is based on cases of poisoning by human ingestion or animal experimentation.Dermatotoxin - Skin burns.Toxic Pneumonitis - Inflammation of the lungs induced by inhalation of metal fumes or toxic gases and vapors.ACGIH Carcinogen - Not Classifiable. |
|---|
| Expositionspfade | The substance can be absorbed into the body by inhalation of its vapour, through the skin and by ingestion. Serious local effects by all routes of exposure.inhalation, skin absorption, ingestion, skin and/or eye contactOral (L528)inhalation (L528)dermal (L528) |
|---|
| Toxizitätsübersicht | The CIR Expert panel concludes Sodium p-Chloro-m-Cresol, p-Chloro-m-Cresol, Chlorothymol, m-Cresol, o-Cresol, Isopropyl Cresols, Thymol, o-Cymen-5-ol, Cavacrol are safe at concentrations up to 0.5% in cosmeticshowever, the available data are insufficient to support the safety of p-Cresol and Mixed Cresols for use in cosmetic products.Safe for use in cosmetics, with qualificationsIDENTIFICATION AND USE: m-Cresol is colorless, yellowish liquid. It is used as a bactericide for control of crown gall and olive knot on certain fruit and nut trees and ornamentals and the genetic/physiological disorder burr knot on apples. Currently, one product is registered which contains both m-cresol and xylenol. Used as disinfectant/bacteriocide/germicide for animal pathogenic bacteria (G- and G+ vegetative) in households, sickrooms, hospitals, veterinary clinics, and veterinary hospitalson surgical instruments, diagnostic instruments/equipment and on hospital critical rubber/plastic items. Used as an insecticide and miticide on dogs for treatment of lice and fleas. It is also used for making synthetic resinsin photographic developers, explosives. Additionally, m-cresol is chemical intermediate for thymol used in cough/cold medicinals, synthetic pyrethroid insecticides, 3-methyl-6-t-butylphenol, trinitro-m-cresol for explosives, and phenolic resinsdisinfectant ingredientore flotation agentsolvent. m-Cresol, either pure or mixed with p-cresol, is important in the production of contact herbicides. m-Cresol is also a precursor to the pyrethroid insecticides. Furthermore, many flavor and fragrance compounds, such as (-)-methanol and musk ambrette, are derived from m-cresol. Several important antioxidants including synthetic vitamin E are produced from m-cresol. Finally, m-cresol is used as a topical dental antiseptic, and it is also used in insulin preparations. HUMAN EXPOSURE AND TOXICITY: o-Cresol, m-Cresol, and p-Cresol are metabolites of toluene and urinary levels are often used to monitor exposure to and metabolism of toluene. m-Cresol, o-Cresol, and p-Cresol are biomarkers for phenol exposure. The ability of m-Cresol to increase the permeability of human lung fibroblast membranes was reported. m-Cresol is used for endodontic treatments in dentistry and is cytotoxic to human dental pulp cells (D824 cells). ANIMAL STUDIES: In an acute dermal toxicitym-Cresol is a cholinesterase or acetylcholinesterase (AChE) inhibitor. A cholinesterase inhibitor (or 'anticholinesterase') suppresses the action of acetylcholinesterase. Because of its essential function, chemicals that interfere with the action of acetylcholinesterase are potent neurotoxins, causing excessive salivation and eye-watering in low doses, followed by muscle spasms and ultimately death. Nerve gases and many substances used in insecticides have been shown to act by binding a serine in the active site of acetylcholine esterase, inhibiting the enzyme completely. Acetylcholine esterase breaks down the neurotransmitter acetylcholine, which is released at nerve and muscle junctions, in order to allow the muscle or organ to relax. The result of acetylcholine esterase inhibition is that acetylcholine builds up and continues to act so that any nerve impulses are continually transmitted and muscle contractions do not stop. Among the most common acetylcholinesterase inhibitors are phosphorus-based compounds, which are designed to bind to the active site of the enzyme. The structural requirements are a phosphorus atom bearing two lipophilic groups, a leaving group (such as a halide or thiocyanate), and a terminal oxygen. |
|---|
| Ökotoxizitätsauszüge | /AQUATIC SPECIES/ Three common disinfectants were selected in this study to investigate their toxicity to Daphnia magna. The methods used in this study included the traditional acute toxicity test, new embryo toxicity test, and teratogenic test. The study concluded that the acute toxicity of the three disinfectants to young daphnids and embryos were hypochlorite > formaldehyde > m-cresol. The effects on growth mostly occurred in the late stages of organogenesis. Of the organs, the Malpighian tube was the most sensitive to disinfectants during embryonic organogenesis. After exposure of the disinfectants to sunlight for 4 hr, acute toxicity and teratogenic effects of hypochlorite on young daphnids decreased by 30% and 71%, respectively, while those of formaldehyde decreased by 35% and 49%, respectively. In addition, comparing toxic endpoints of the three disinfectants with and without sunlight exposure, the embryo tests were equally sensitive to the three-week reproduction test in this study./AQUATIC SPECIES/ Growth studies have shown that /m-/cresols are moderately toxic to aquatic bacteria, cyanobacteria (blue-green algae) and protozoa. Growth inhibition thresholds ... /were 53 mg/L/ for the bacterium Pseudomonas putida ... 13 mg/L for the cyanobacterium Microcystis aeruginosa ... 31 mg/L for the bacteriovorous flagellate protozoan Entosiphon sulcatum and ... 114 mg/L for the saprozoic flagellate protozoan, Chilomonas paramecium. |
|---|
| RCRA-Anforderungen | U052As stipulated in 40 CFR 261.33, when cresol, as a commercial chemical product or manufacturing chemical intermediate or an off-specification commercial chemical product or a manufacturing chemical intermediate, becomes a waste, it must be managed according to Federal and/or State hazardous waste regulations. Also defined as a hazardous waste is any residue, contaminated soil, water, or other debris resulting from the cleanup of a spill, into water or on dry land, of this waste. Generators of small quantities of this waste may qualify for partial exclusion from hazardous waste regulations (40 CFR 261.5). /Cresol/F004When cresols are a spent solvent, they are classified as a hazardous waste from a nonspecific source (F004), as stated in 40 CFR 261.31, and must be managed according to State and/or Federal hazardous waste regulations.D024A solid waste containing m-cresol may become characterized as a hazardous waste when subjected to testing for toxicity as stipulated in 40 CFR 261.24, and if so characterized, must be managed as a hazardous waste. If o-, m-, and p-cresol concentrations cannot be differentiated, the total cresol (D026) concentration is used. |
|---|
| TSCA-Anforderungen | Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. m-Cresol is included on this list. Effective date: 10/04/82Sunset date: 10/04/92. |
|---|
| FIFRA-Anforderungen | Based on the reviews of the generic data for the active ingredients m-cresol and xylenol, the Agency has sufficient information on their health effects and on their potential for causing adverse effects in fish and wildlife and the environment. The Agency has determined that m-cresol and xylenol products, labeled and used as specified in this Reregistration Eligibility Decision, will not pose unreasonable risks or adverse effects to humans or the environment. Therefore, the Agency concludes that products containing m-cresol and xylenol for all uses are eligible for reregistration.As the federal pesticide law FIFRA directs, EPA is conducting a comprehensive review of older pesticides to consider their health and environmental effects and make decisions about their continued use. Under this pesticide reregistration program, EPA examines newer health and safety data for pesticide active ingredients initially registered before November 1, 1984, and determines whether the use of the pesticide does not pose unreasonable risk in accordance to newer saftey standards, such as those described in the Food Quality Protection Act of 1996. Pesticides for which EPA had not issued Registration Standards prior to the effective date of FIFRA '88 were divided into three lists based upon their potential for human exposure and other factors, with List B containing pesticides of greater concern than those on List C, and with List C containing pesticides of greater concern than those on List D. Cresol is found on List D. Case No: 4027Pesticide type: fungicideCase Status: RED Approved 09/94OPP has made a decision that some/all uses of the pesticide are eligible for reregistration, as reflected in a Reregistration Eligibility Decision (RED) document.Active ingredient (AI): cresolAI Status: OPP has completed a Reregistration Eligibility Decision (RED) document for the case/AI. |
|---|
| Luftstandards | This action promulgates standards of performance for equipment leaks of Volatile Organic Compounds (VOC) in the Synthetic Organic Chemical Manufacturing Industry (SOCMI). The intended effect of these standards is to require all newly constructed, modified, and reconstructed SOCMI process units to use the best demonstrated system of continuous emission reduction for equipment leaks of VOC, considering costs, non air quality health and environmental impact and energy requirements. m-Cresol is produced, as an intermediate or a final product, by process units covered under this subpart. |
|---|
| CERCLA-Meldepflichtmengen | Persons in charge of vessels or facilities are required to notify the National Response Center (NRC) immediately, when there is a release of this designated hazardous substance, in an amount equal to or greater than its reportable quantity of 100 lb or 45.4 kg. The toll free number of the NRC is (800) 424-8802. The rule for determining when notification is required is stated in 40 CFR 302.4 (section IV.D.3.b). |
|---|
| Clean Water Act Anforderungen | m-Cresol is designated as a hazardous substance under section 311(b)(2)(A) of the Federal Water Pollution Control Act and further regulated by the Clean Water Act Amendments of 1977 and 1978. These regulations apply to discharges of this substance. This designation includes any isomers and hydrates, as well as any solutions and mixtures containing this substance. |
|---|
| Landesrichtlinien für Trinkwasser | (FL) FLORIDA 350 ug/L(MN) MINNESOTA 30 ug/L(ME) MAINE 35 ug/L |
|---|
| UN-Transportnummer | 2076 |
|---|
| Gefahrenklasse | 6.1 |
|---|
| Verpackungsgruppe | II |
|---|
