HuagongsheHuagongshe Chemie-Druckbericht · Nur für Forschungszwecke
Halazon
Halazon · Zeptabs · HALAZONE · Gynamide · Halozone · nsc60717 · PANTOCID · Pantosid
Identifikatoren & physikalische Daten
| CAS No. | 80-13-7 |
|---|---|
| Summenformel | C7H5Cl2NO4S |
| Durchschnittliche Molmasse | 270,09 g/mol |
| Monoisotopische Masse | 268,9316342 g/mol |
| SMILES | O=C(O)c1ccc(S(=O)(=O)N(Cl)Cl)cc1 |
| InChIKey | XPDVQPODLRGWPL-UHFFFAOYSA-N |
| PubChem CID | 3552 |
| ChEMBL | CHEMBL1368146 |
| EC No. | 201-253-1 |
| DTXSID | DTXSID9025370 |
| Lokaler Name | Halazon |
Chemische & physikalische Eigenschaften
| XLogP | 1,6 |
|---|---|
| Polarare Oberfläche (TPSA) | 83,1 |
| H-Brücken-Donoren | 1 |
| H-Brücken-Akzeptoren | 5 |
| Frei drehbare Bindungen | 2 |
| Schwere Atome | 15 |
| Formalladung | 0 |
| Komplexität | 329 |
| Stoffklassen | Other Uses -> Biocides/Disinfectants |
| Löslichkeit | less than 1 mg/mL at 70 °F (NTP, 1992)Soluble in DMSO |
| Schmelzpunkt | 415 °F (NTP, 1992)195°C (rough estimate) |
| Physical Description | Halazone is a fine white powder with an odor of chlorine. (NTP, 1992)Solid with an odor of chlorine[Merck Index] |
| Siedepunkt | 437.0±47.0 °C(Predicted) |
| Dichte | 1.5426 (rough estimate) |
| Brechungsindex | 1.6000 (estimate) |
| Lagerbedingungen | Store at -20°C,unstable in solution, ready to use. |
| Aggregatzustand | Solid |
| pKa (Säurekonstante) | 3.29±0.10(Predicted) |
| Farbe | White to off-white |
| Merck | 14,4590 |
| Stabilität | Stable, but may be light sensitive. Incompatible with strong oxidizing agents. |
| InChI | 1S/C7H5Cl2NO4S/c8-10(9)15(13,14)6-3-1-5(2-4-6)7(11)12/h1-4H,(H,11,12) |
| InChIKey | XPDVQPODLRGWPL-UHFFFAOYSA-N |
| SMILES | OC(=O)c1ccc(cc1)S(=O)(=O)N(Cl)Cl |
| CAS Datenbank | 80-13-7(CAS DataBase Reference) |
| NIST chemische Informationen | Benzoic acid, p-(dichlorosulfamoyl)-,(80-13-7) |
| EPA chemische Informationen | Halazone (80-13-7) |
Sicherheit & Vorschriften
| GHS-Einstufung | This chemical does not meet GHS hazard criteria for 50% (1 of 2) of reports.WarningH315 (50%): Causes skin irritation [Warning Skin corrosion/irritation]P264, P264+P265, P280, P302+P352, P305+P351+P338, P321, P332+P317, P337+P317, and P362+P364 (click each P-code to see the statement)Aggregated GHS information provided per 2 reports by companies from 2 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies. |
|---|---|
| DOT-Kennzeichnung | Oxidizer |
| Brandgefahren | Flash point data for this chemical are not available, but it is probably combustible. (NTP, 1992) |
| Gesundheitsgefahren | Excerpt from ERG Guide 140 [Oxidizers]: |
| Gefahrenübersicht | Causes chronic pulmonary edema in intravenous lethal-dose studies of ratsCauses altered gastric secretion and pigmented or nucleated red blood cells in 5-week intermittent oral studies of rabbits[RTECS] May cause irritation[Sigma-Aldrich MSDS] |
| Reaktive Gruppe | Acids, Carboxylic |
| Air and Water Reactions | Insoluble in water. |
| Hazard Classes and Categories | Skin Irrit. 2 (50%) |
| Brandbekämpfung | Fires involving this compound should be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992) |
| Erste Hilfe | EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. |
| Freisetung ohne Brand | SMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. |
Anwendungen & Verwendung
Verwenden
antiinfectant