StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Verbindung

Natriumtetrahydroborat

Sodium borohydride

HCID 4311764
Neue Reaktion
Drucken
GrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
TeilstruktursucheÄhnliche Strukturen suchen

Grundinformationen

CAS
16940-66-2
Standard-SMILES
[BH4-].[Na+]
InChIKey
YOQDYZUWIQVZSF-UHFFFAOYSA-N
Summenformel
BH4.Na
Durchschnittliche Molmasse
37,84 g/mol
Monoisotopische Masse
38,0303746

Überblick

Sodium borohydride is a white to grayish crystalline powder. It is decomposed by water to form sodium hydroxide, a corrosive material, and hydrogen, a flammable gas. The heat of this reaction may be sufficient to ignite the hydrogen. The material itself is easily ignited and burns vigorously once ignited. It is used to make other chemicals, treat waste water, and for many other uses.

Namen und Bezeichner

Bevorzugter Name
Sodium borohydride
IUPAC
sodium boranuide
Lokaler Name
Natriumtetrahydroborat
Englischer Name
Sodium borohydride
Summenformel
BH4Na
Molmasse
37.83

Namen und Synonyme

NaBH4borohydrure de sodiumBorolHidkitex DFSodium tetrahydridoborate(1-)HYDRIFINSodium borohydride (Na(BH4))DTXSID80893977Borate(1-), tetrahydro-, sodiumCOLORSTRIP 2000CHEBI:50985RefChem:183807
Weitere Namen anzeigen
SODIUM TETRAHYDROBORATESBHSODIUM TETRAHYDRIDOBORATEAFBH4NasodiumborohydrateNatriumtetrahydroboratSODIUM BOROHYDRIDE CAPLETSSodium borohydride, 98% min
DTXCID801324021241-004-416940-66-287L0B9CPPABORATE(1-), TETRAHYDRO-, SODIUM (1:1)EC 241-004-4EINECS 241-004-4Sodium borohydrate

Datenbank-Bezeichner

CAS
16940-66-2
PubChem CID
4311764
DTXSID
DTXSID80893977
ChEBI
CHEBI:50985
UNII

Eigenschaften

Berechnete Struktureigenschaften

Polarare Oberfläche (TPSA)
0 Ų
H-Brücken-Donoren
0
H-Brücken-Akzeptoren
1
Frei drehbare Bindungen
0
Schwere Atome
2
Formalladung
0
Komplexität
2

Experimentelle und physikochemische Eigenschaften

Chemical Classes · 2 Einträge

Metals -> Metal Hydrides

Reactive agents - 1st degree

Food AdditivesFLAVORING AGENT OR ADJUVANT -> FDA Substance added to food
Density · 4 Einträge

1.074 at 68 °F (USCG, 1999) - Denser than water; will sink

1.074 g/cu cm (anhydrous material)

1.07 g/cm³

1.07 @25 °C

Color/Form · 2 Einträge

White to gray-white microcystalline powder or lumps

White cubic crystals, hygroscopic

Solubility · 5 Einträge

Soluble in "Cellosolve" ether

Soluble in ammonia, amines, pyridine, dimethyl ether of diethylene glycol; insoluble in other ethers, hydrocarbons, alkyl chlorides

Solubility (wt/wt) in liquid ammonia, 104% at 25 °C; in ethylenediamine, 22% at 75 °C; in morpholine, 1.4% at 25 °C; in pyridine, 3.1% at 25 °C; in methanol, 16.4% at 20 °C (reacts); in ethanol, 4.0% at 20 °C (reacts slowly); in tetrahydrofuran, 0.1% at 20 °C; in diglyime, 5.5% at 20 °C; in dimethylformamide, 18.0% at 20 °C

Solubility (wt/wt) in water: 55% at 25 °C; 88.5% at 60 °C

Solubility in water, g/100ml at 25 °C: 55

Decomposition

Sicherheit und Regulatorisches

Sicherheitsangaben dienen nur zur Orientierung und ersetzen weder das Sicherheitsdatenblatt (SDB) des Lieferanten noch geltende Vorschriften oder eine fachliche Bewertung.

GHS-Klassifizierung

GHS Classification · 6 Einträge

This chemical does not meet GHS hazard criteria for 0.4% (3 of 671) of reports.

Danger

H260 (86.7%): In contact with water releases flammable gases which may ignite spontaneously [Danger Substances and mixtures which in contact with water, emit flammable gases]

P203, P223, P231+P232, P260, P261, P262, P264, P264+P265, P270, P271, P280, P301+P316, P301+P330+P331, P302+P335+P334, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P318, P321, P330, P361+P364, P363, P370+P378, P402+P404, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 671 reports by companies from 41 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Danger

Gefahrenhinweise

Regulatory Information · 5 Einträge

Chemical: Borate(1-), tetrahydro-, sodium

Borate(1-), tetrahydro-, sodium (1:1) is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Borate(1-), tetrahydro-, sodium (1:1) are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: Sodium tetrahydroborate (EC: 241-004-4)

Borate(1-), tetrahydro-, sodium: HSNO Approval: HSR001294 Approved with controls

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT LabelDangerous When Wet
Fire Hazards · 3 Einträge

Behavior in Fire: Decomposes and produces highly flammable hydrogen gas. (USCG, 1999)

· Produce flammable gases on contact with water.

Chemie und Industrie

Verwendung und Herstellung

Uses · 5 Einträge

Used as a reducing agent, a foaming agent, a bleaching agent (wood pulp), and a blowing agent (plastics); Used in the recycling of gold and platinum; [HSDB]

Metal Preparation and Pouring [Category: Foundry]

Reducing agent for aldehydes, ketones and Schiff bases in nonaqueous solvents. Also reduces acids, esters, acid chlorides, disulfides, nitriles, and inorganic anions. Further used to generate diborane, as foaming agent, as scavenger for traces of aldehyde, ketones and peroxides in organic chemicals.

Source of hydrogen & other borohydrides; bleacher of wood pulp; blowing agent for plastics

Recycling of gold and platinum group metals, inorganic and organometallic reductions, /SRP: analytical reagent/.

U.S. Production2023: 1,000,000 - <8,500,000 lb
Industry UsesBleaching agent
Methods of Manufacturing · 2 Einträge

Prepared from methyl borate and sodium hydride at elevated temperatures.

Manufactured from sodium hydride & trimethyl borate in a mineral oil medium at 275 °C

Formulations/Preparations · 2 Einträge

Commercial sodium borohydride is 97+% pure

Grades of purity: 95-98% minimum purity, dry powder, pellets, 12% solution in 43% aqueous sodium hydroxide.

General Manufacturing Information · 2 Einträge

Pharmaceutical and Medicine Manufacturing

Borate(1-), tetrahydro-, sodium (1:1): ACTIVE

Darstellung · 1 Eintrag

synthetischeSodium borohydride is prepared by reacting sodium hydride with trimethyl borate at about 250°C: 4 NaH + B(OCH3)3 → NaBH3 + 3NaOCH3Also, sodium borohydride can be made by passing diborane, B2H6, through a solution of sodium methylate, NaOCH3 , in methanol: 2B2H6 + 3NaOCH3→ 3NaBH3 + B(OCH3)3Alternatively, diborane may be be passed through a solution of sodium tetramethoxyborohydride at low temperatures: 3 NaB(OCH3)3 + 2B2H6 → 3NaBH3 + 4B(OCH3)3.

Zugehörige Reaktionen

22.691
Reaktionsaufzeichnung erstellen
Reaktionsgleichung von HRID 861
HRID 861als Edukt
Reaktionsgleichung von HRID 904
HRID 904als Edukt
Reaktionsgleichung von HRID 938
HRID 938als Edukt
Reaktionsgleichung von HRID 1044
HRID 1044als Edukt
Reaktionsgleichung von HRID 1046
HRID 1046als Edukt
Reaktionsgleichung von HRID 1160
HRID 1160als Edukt
Reaktionsgleichung von HRID 1231
HRID 1231als Edukt
Reaktionsgleichung von HRID 1257
HRID 1257als Edukt
ZurückSeite 1 von 2837

Notizen zur Verbindung

Auf dieser SeiteGrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
87L0B9CPPA
EC Number
241-004-4
· 3 Einträge

When heated to decomposition emits toxic fumes of /sodium oxides/.

Solutions are rapidly decomposed by boiling.

>250 °C

Melting Point>400 °C (vacuum) (decomposes)
Refractive IndexINDEX OF REFRACTION: 1.542
Physical Description · 4 Einträge

Sodium borohydride is a white to grayish crystalline powder. It is decomposed by water to form sodium hydroxide, a corrosive material, and hydrogen, a flammable gas. The heat of this reaction may be sufficient to ignite the hydrogen. The material itself is easily ignited and burns vigorously once ignited. It is used to make other chemicals, treat waste water, and for many other uses.

Dry Powder; Liquid; Dry Powder

Gray to white crystals or powder; [HSDB]

WHITE CRYSTALLINE POWDER.

Stability/Shelf Life · 2 Einträge

Anhydrous material is stable in dry air to 300 °C; decomposes slowly at 400 °C and rapidly at 500 °C

Aqueous solutions are most stable in the presence of small amounts of sodium hydroxide (0.2% for a nearly saturated solution containing 44% sodium borohydride) and can be kept for several days.

Autoignition Temperature~220 °C
Other Experimental Properties · 4 Einträge

Hygroscopic, cubic crystals forming a dihydrate, mp 36-37 °C; anhydrous material is stable in dry air to 300 °C; decomposes slowly at 400 °C and rapidly at 500 °C

Aqueous solutions are most stable in the presence of small amounts of NaOH (0.2% for a nearly saturated solution containing 44% NaBH4) and can be kept for several days; solutions are rapidly decomposed by boiling

Standard enthalpy of formation: -188.6 kJ/mol (crystal); Molar heat capacity 86.8 J/mol K at 25 °C (crystal)

Decomposes on heating to constituent elements

Physikochemische Eigenschaften

Schmelzpunkt
300 °C · >300 °C (dec.) (lit.)
Siedepunkt
500 °C · 500°C
Dichte
1.035 g/mL · 1.035 g/mL at 25 °C
Dampfdruck
1 hPa · <1 hPa (25 °C)
Flammpunkt
158 °F · 158 °F
storage temp.
Store at RT.
Löslichkeit
Methanol (Slightly), Water (Soluble)
Aggregatzustand
tablets
Wichte
1.4 · 1.4
Farbe
White
PH
11 · 11 (10g/l, H2O, 20℃)
Explosionsgrenze
3.02 % · 3.02%(V)
Wasserlöslichkeit
550 g/L · 550 g/L (25 ºC)
Spezifische Wärmekapazität
2.29 J/ · Cp(crystal): 2.29 J/(g·K), at 25℃
Merck
14 · 14,8592
Stabilität
Stability Stable, but reacts readily with water (reaction may be violent). Incompatible with water, oxidizing agents, carbon dioxide, hydrogen halides, acids, palladium, ruthenium and other metal salts, glass. Flammable solid. Air-sensitive.
Kosmetik-Inhaltsstoffe Funktionen
BULKINGANTIOXIDANTSKIN CONDITIONING
InChI
1S/BH4.Na/h1H4;/q-1;+1
InChIKey
YOQDYZUWIQVZSF-UHFFFAOYSA-N
SMILES
[BH4-].[Na+]
CAS Datenbank
16940 · 16940-66-2(CAS DataBase Reference)
NIST chemische Informationen
Sodium tetrahydroborate(16940-66-2)
EPA chemische Informationen
Sodium borohydride (16940-66-2)

Combustible. Risk of fire and explosion on contact with acids, alcohol, oxidizing agents or water.

Fire Potential · 2 Einträge

Moderate, when exposed to heat or flame or by chemical reaction with oxidizers.

Supports combustion

Health Hazards · 2 Einträge

Solid irritates skin. If ingested can form large volume of gas and lead to a gas embolism. (USCG, 1999)

· Inhalation or contact with vapors, substance or decomposition products may cause severe injury or death.

Hazards SummaryAt lethal concentrations, animals have seizures; [ChemIDplus] Corrosive to skin, eyes, and respiratory tract; Inhalation can cause acute pulmonary edema; [CHEMINFO MSDS]
DOT ID and Guide1426 138
Reactive GroupMetal Hydrides, Metal Alkyls, Metal Aryls, and Silanes
UN ClassificationUN Hazard Class: 4.3; UN Pack Group: I
Reactivity AlertsStrong Reducing Agent
Reactivity Profile · 1 Eintrag

SODIUM BOROHYDRIDE is a powerful reducing agent. A chemical base. Absorbs moisture readily forming caustic solution. which attacks aluminum and zinc. A violent polymerization of acetaldehyde results from the reactions of acetaldehyde with alkaline materials such as sodium hydroxide. Calcium oxide or sodium hydroxide react with phosphorus pentaoxide extremely violently when initiated by local heating [Mellor 8 Supp.3:406 (1971]. Using potassium hydroxide to dry impure tetrahydrofuran, which contains peroxides, may be hazardous. Explosions have occurred in the past. Sodium hydroxide behaves in a similar way as potassium hydroxide [NSC Newsletter, Chem. Soc. 1967]. Ignition occurs if a mixture of the hydride and sulfuric acid is not cooled. Contact of glycerol and sodium borohydride leads to ignition, other glycols and methanol are exothermic but do not ignite.

Chemical Dangers · 1 Eintrag

Decomposes on heating and on contact with acids, powdered metals, water and moisture. This produces flammable/explosive gas (hydrogen - see ICSC 0001). The substance is a strong reducing agent. It reacts violently with oxidants. This generates fire and explosion hazard.

Sicherheit und Schutzausrüstung

Fire Fighting · 2 Einträge

Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]:

Use dry sand, dry powder. NO water. NO foam. NO carbon dioxide.

First Aid Measures · 4 Einträge

Fresh air, rest. Refer immediately for medical attention.

First rinse with plenty of water for at least 15 minutes, then remove contaminated clothes and rinse again. Refer for medical attention .

Rinse with plenty of water for several minutes (remove contact lenses if easily possible). Refer immediately for medical attention.

Rinse mouth. Give one or two glasses of water to drink. Do NOT induce vomiting. Refer immediately for medical attention.

Accidental Release Measures · 2 Einträge

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 2 Einträge

INGESTION: do NOT induce vomiting; give dilute vinegar, lemon juice, milk, or olive oil; call a doctor.

General First Aid:

Safe StorageDry. Well closed. Separated from strong acids, alcohols, powdered metals and water.
Exposure Control and Personal Protection· Wear positive pressure self-contained breathing apparatus (SCBA).
Fire Fighting Procedures · 3 Einträge

Fire extinguishing agents: graphite, limestone, soda ash, sodium chloride powders

Fire extinguishing agents not to be used: Water, carbon dioxide, or halogenated extinguishing agents.

If material on fire or involved in fire: Do not use water. Use graphite, soda ash, powdered sodium chloride, or suitable dry powder.

Storage ConditionsStorage temperature: ambient. Venting: sealed containers must be stored in well-ventilated area.
Nonfire Spill ResponseExcerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]:
Disposal Methods · 1 Eintrag

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.

Spillage Disposal · 1 Eintrag

Remove all ignition sources. Personal protection: chemical protection suit and particulate filter respirator adapted to the airborne concentration of the substance. Sweep spilled substance into covered dry, plastic containers. Carefully collect remainder. Then store and dispose of according to local regulations.

Preventive Measures · 5 Einträge

Obvious industrial hygiene recommendations /include/ (1) sodium borohydride is flammable and exothermic in presence of moisture and should be handled with special care to prevent serious burns, and (2) measures should be taken to prevent workers from ocular, cutaneous, or inhalation exposures ...

SRP: Contaminated protective clothing should be segregated in such a manner so that there is no direct personal contact by personnel who handle, dispose, or clean the clothing. Quality assurance to ascertain the completeness of the cleaning procedures should be implemented before the decontaminated protective clothing is returned for reuse by the workers. Contaminated clothing should not be taken home at end of shift, but should remain at employee's place of work for cleaning.

SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.

If material not on fire and not involved in fire: Do not use water. Keep sparks, flames, and other sources of ignition away. Keep out of water sources and sewers. Keep material dry. Do not attempt to sweep up dry material.

For more Preventive Measures (Complete) data for SODIUM BOROHYDRIDE (8 total), please visit the HSDB record page.

Toxikologische Informationen

Adverse EffectsNeurotoxin - Other CNS neurotoxin
Exposure RoutesSerious local effects by all routes of exposure.
Signs and Symptoms · 4 Einträge

Burning sensation. Cough. Sore throat. Laboured breathing. Shortness of breath.

Redness. Pain. Skin burns.

Redness. Pain. Severe deep burns.

Burning sensation in the throat and chest. Abdominal pain. Vomiting. Shock or collapse.

Medical SurveillanceNo specific considerations are needed for boric acid or borates except for general health and liver and kidney function. /Boric acid and borates/
Non-Human Toxicity Excerpts · 2 Einträge

/LABORATORY ANIMALS: Acute Exposure/ By dermal application to the moist back of rabbits 6 of 10 died when 400 mg was applied in 2 doses in the same area; however, when the same application was made in different areas, no deaths resulted. ... Sodium borohydride on dry skin ... produced no signs of irritation.

/LABORATORY ANIMALS: Acute Exposure/ When instilled into the eye of rabbits, 1 mg sodium borohydride produced irreversible damage ...

Environmental Fate/Exposure Summary · 1 Eintrag

Inorganic boron compounds (with the exception of hydroboranes) are expected to be nonvolatile and will exist solely in the particulate phase in the ambient atmosphere. Particulate-phase boron compounds will be removed from the atmosphere by wet and dry deposition. The chemistry of boron is dominated by its tendency to form stable bonds with electronegative atoms, especially oxygen. Reduced boron compounds (halides, hydrides, alkyls and aryls) tend to oxidize and hydrolyze readily, and would be expected to be converted into various boron-oxide compounds in the environment. Inorganic boron compounds are nonvolatile and would not be expected to volatilize from moist or dry soil surfaces. Since the adsorption of boron is expected to be most significant for soils that contain high concentrations of amorphous aluminum and iron oxides and hydroxides, sediments with these characteristics may also strongly adsorb boron compounds. (SRC)

Antidote and Emergency Treatment · 5 Einträge

Maintain an open airway and assist ventilation if nescessary. treat coma, seizures, hypotension, and renal failure if they occur. There is no specific antidote. Administer activated charcoal (although boric acid is not well absorbed). Consider gastric lavage for large ingestions. /Boric acid, Borates, and Boron/

Hemodialysis is effective and is indicated after massive ingestions and for supportive care of renal failure. Peritoneal dialysishas not proved effective in enhancing elimination in infants. /Boric acid, Borates, and Boron/

In acute poisonings, if a large amount has been ingested and the patient is seen within one hour of exposure, gastrointestinal decontamination should be considered ... .It is important to keep in mind that vomiting and diarrhea are common, and severe poisoning may be associated with seizures. Therefore induction of emesis by syrup of ipecac is probably contraindicated in these exposures. Catharsis is not indicated if diarrhea is present. /Boric acid and Borates/

If ingestion of borate has been massive (several grams), or has extended over several days, administer intravenous glucose and electrolyte solutions to sustain urinary excretion of borate. Monitor fluid balance and serum electrolytes (including bicarbonate capacity ) regularly. Monitor cardiac status by ECG. Test the urine for proteins and cells to detect renal injury, and monitor serum concentration of borate. Metabolic acidosis may be treated with sodium bicarbonate. If shock develops, it may be necessary to infuse plasma or whole blood. Administer oxygen continuously. If oliguria (less than 25 to 30 mL urine per hour) occurs, intravenous fluids must be slowed or stopped to avoid overloading the circulation. Such patients should be referred to a center capable of providing intensive care for critically ill patients. /Boric acid and Borates/

For more Antidote and Emergency Treatment (Complete) data for SODIUM BOROHYDRIDE (7 total), please visit the HSDB record page.

Toxicity DataLC50 (rat) = 36 mg/m3
Non-Human Toxicity Values · 2 Einträge

LD50 Rat oral 160 mg/kg bw

LD50 Rat ip 18 mg/kg

Regulatorische Informationen

State Drinking Water Guidelines · 5 Einträge

(CA) CALIFORNIA 1000 ug/L /Boron/

(NH) NEW HAMPSHIRE 630 ug/L /Boron/

(ME) MAINE 1,400 ug/L /Boron/

(MN) MINNESOTA 1,000 ug/L /Boron/

(WI) WISCONSIN 960 ug/L /Boron/

Federal Drinking Water GuidelinesEPA 600 ug/L /Boron/

Sicherheitsdaten

F
10-21
wgk
2
tsca
TSCA listed
ridadr
UN 1426
hs_code
2850009090
RTECS-Nr.
ED3325000
risk_code
60-61-15-34-23/24/25-24/25-35-21/22-51/53-42/43-49-63-62-36/38-43-19-68-50/53
Toxizität
LD50 orally in Rabbit: 160 mg/kg LD50 dermal Rabbit 230 mg/kg
hazard_code
F,T,N,C,Xn
safety_code
53-43-45-43A-36/37/39-26-22-50-36/37-61
hazard_class
4.3
packing_group
I
Speicherklasse
4.3 - Hazardous materials which set free flammable gases upon contact with water
Giftige Stoffe Daten
16940-66-2(Hazardous Substances Data)
Hazard Classifications
Acute Tox. 3 OralEye Dam. 1Repr. 1BSkin Corr. 1BWater-react 1
Selbstentzündungstemperatur
220 °C

Vor- und nachgelagerte Produkte

Vorgelagerte Rohstoffe

NatriumhydridNatriumBorsureWasserstoffMethanolSchwefelsureIsochinolin-1-carbonsure

Nachgelagerte Produkte

Pyridin-Boran (1:1)tert-Butyl 4-(hydroxymethyl)pyridin-2-ylcarbamate3-Bromo-cyclopent-2-enol9-AnthracenmethanolDL-Phenylalaninol3-BrombenzylalkoholRocuronium bromide4-BrombenzylalkoholDesogestrel2-Phenylpropan-1-olN,N-Dimethyl-4-[(methylamino)methyl]aniline(2,6-Dichloro-3-nitro)benzyl alcohol3,5-Dimethoxybenzyl bromide3,5-DimethoxybenzylalkoholMethyl-(2-trifluoromethyl-benzyl)-amine4-Trifluoromethylbenzyl chlorideAtorvastatinEthyl 6-(hydroxymethyl)pyridine-2-carboxylate1-AminocyclopentanmethanolTetrabutylammoniumtetrahydroborat(1H-Imidazol-2-yl)-methanolCARUMONAMGalaktitacid washing corrosion inhibitor Sx-1(3-Fluorobenzyl)methylamine4,4-Dimethylcyclohexan-1-ol(1H-Imidazol-2-ylmethyl)-methyl-amine3-Methoxy-N-methylbenzylamine 973-Methoxysalicylalkohol5-Methylhexan-2-olEthyl 6-(chloromethyl)pyridine-2-carboxylate(S)-2-Methylbutan-1-ol2-Methoxy-N-methylbenzylamine hydrochloride ,97%6-(Aminomethyl)pyridine-2-carbohydrazideN-(4-Methoxybenzyl)-N-methylamine1-Methylcyclohexanol3-Chloro-N-methylbenzylamine2-Hydroxy-6-chloroquinoxaline2-chloro-5-ethylaminomethylpyridine9-(Chlormethyl)anthracen

Ergänzende Hinweise

DefinitionChEBI: Sodium borohydride is an inorganic sodium salt and a metal tetrahydridoborate.