StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Verbindung

Natriumdimethyldithiocarbamat

Sodium Dimethyldithiocarbamate

HCID 560256
Neue Reaktion
Drucken

Daten werden ergänzt – lade die Seite später neu, um den aktuellen Stand zu sehen

GrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
TeilstruktursucheÄhnliche Strukturen suchen

Grundinformationen

CAS
128-04-1
Standard-SMILES
CN(C)C(=S)[S-].[Na+]
InChIKey
VMSRVIHUFHQIAL-UHFFFAOYSA-M
Summenformel
C3H6NNaS2
Durchschnittliche Molmasse
143,21 g/mol
Monoisotopische Masse
142,98393582

Überblick

Sodium dimethyldithiocarbamate can cause developmental toxicity according to The Environmental Protection Agency (EPA).

Namen und Bezeichner

Bevorzugter Name
Sodium Dimethyldithiocarbamate
IUPAC
sodium N,N-dimethylcarbamodithioate
Lokaler Name
Natriumdimethyldithiocarbamat
Englischer Name
Sodium dimethyldithiocarbamate
Summenformel
C3H6NNaS2
Molmasse
143.21

Namen und Synonyme

Sodium dimethyldithiocarbamate128-04-1Sodium dimethylcarbamodithioateDimethyldithiocarbamic acid sodium saltSanceler SWing Stop BDiaprosim AB 13VinditatSdmdtcVinstopDiramSodam
Weitere Namen anzeigen
sddcmslSodium DimethyLSODIUM N,N-DIMETHYLDITHIOCARBAMATEDimethyl dithiocarbamate, sodium saltSODIUM DIMETHYLDITHIOCARBAMATE DIHYDRATEdimethyl-carbamodithioic acid sodium salt
Sodium dimethyl dithiocarbamateMethyl namateAceto SDD 40Nocceler SThiostop NVulnopol NMAlcobam NMCarbam S

Datenbank-Bezeichner

CAS
128-04-1、72140-17-1
PubChem CID
560256
DTXSID
DTXSID6027050
ChEMBL
CHEMBL569460

Eigenschaften

Berechnete StruktureigenschaftenWird ergänzt

Polarare Oberfläche (TPSA)
36,3 Ų
H-Brücken-Donoren
0
H-Brücken-Akzeptoren
2
Frei drehbare Bindungen
0
Schwere Atome
7
Formalladung
0
Komplexität
64

Experimentelle und physikochemische Eigenschaften

Chemical ClassesTeratogens
pHpH = 10.1 (1% aqueous solution); pH 12.6 (32% aqueous solution)
Pesticides · 3 Einträge

Fungicides

Active substance -> EU Pesticides database: Not approved

Pesticides -> Dithiocarbamates (Pesticide)

Food AdditivesANTIMICROBIAL AGENT -> FDA Substance added to food
Density1.43 g/mL at 20 °C
Color/FormYellow liquid (40% w/w aqueous solution)
SolubilityMiscible with water
DecompositionWhen heated to decomposition it emits toxic fumes of /nitrogen and sulfur oxides as well as sodium oxide/.
Melting Point110 °C
Food Contact SubstancesFCS -> FDA Inventory of Food Contact Substances Listed in 21 CFR

Sicherheit und Regulatorisches

Sicherheitsangaben dienen nur zur Orientierung und ersetzen weder das Sicherheitsdatenblatt (SDB) des Lieferanten noch geltende Vorschriften oder eine fachliche Bewertung.

GHS-Klassifizierung

GHS Classification · 6 Einträge

Warning

H332 (12.2%): Harmful if inhaled [Warning Acute toxicity, inhalation]

P261, P271, P273, P304+P340, P317, P391, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 450 reports by companies from 17 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Warning

H302: Harmful if swallowed [Warning Acute toxicity, oral]

Gefahrenhinweise

Regulatory Information · 6 Einträge

Chemical: Carbamodithioic acid, dimethyl-, sodium salt

Hazard Traits - Developmental Toxicity

Carbamodithioic acid, N,N-dimethyl-, sodium salt (1:1) is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Carbamodithioic acid, N,N-dimethyl-, sodium salt (1:1) are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

2002/2076

REACH registered substance: Sodium dimethyldithiocarbamate (EC: 204-876-7)

Sodium dimethyldithiocarbamate: Does not have an individual approval but may be used under an appropriate group standard

Fire HazardsFlash point data for this compound are not available. It is probably not flammable. (NTP, 1992)
Health HazardsACUTE/CHRONIC HAZARDS: When heated to decomposition it emits very toxic fumes. (NTP, 1992)
Hazards SummaryMay cause irritation; [MSDSonline] Several of the dialkyldithiocarbamates are known skin sensitizers; See Carba mix.
FDA Requirements

Chemie und Industrie

Pharmakologische Informationen

Absorption, Distribution and Excretion · 1 Eintrag

...Partition of Mn in the presence of potassium ethylxanthate, sodium diethyldithiophosphate, sodium dimethyldithiocarbamate, and sodium diethyldithiocarbamate between octanol and Tris-HCl buffer showed formation of lipophilic complex with the latter two compounds, but not with the former. However, these four chelating agents all decreased Mn uptake in the /Brown/ trout /(Salmo trutta)/ by 40-45%. ...

Verwendung und Herstellung

Uses · 6 Einträge

Used as a disinfectant, corrosion inhibitor, coagulant, vulcanizing agent, chelating agent, fungicide, and biocide (paints, cutting oils, water treatment, leather tanning, and paper manufacturing); [HSDB]

Metal Machining [Category: Heat or Machine]

For sodium dimethyldithiocarbamate (USEPA/OPP Pesticide Code: 034804) ACTIVE products with label matches. /SRP: Registered for use in the U.S. but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./

Disinfectant. Corrosion inhibitor. Coagulant. Vulcanizing agent. Chelating agent. Fungicide.

Used as a vulcanization ultra-accelerator for mixes based on synthetic and natural rubbers (for example butadiene rubber) and natural and synthetic latex. A fungicide.

In water treatment, the rubber industry and is a registered biocide for cutting oils and aqueous systems in industries such as leather tanning and paper manufacturing.

U.S. Production · 2 Einträge

2023: 2,500,000 - <4,000,000 lb

Carbamodithioic acid, dimethyl-, sodium salt is listed as a High Production Volume (HPV) chemical (65FR81686). Chemicals listed as HPV were produced in or imported into the U.S. in >1 million pounds in 1990 and/or 1994. The HPV list is based on the 1990 Inventory Update Rule. (IUR) (40 CFR part 710 subpart B; 51FR21438).

Consumer UsesSolids separation (precipitating) agent, not otherwise specified

Zugehörige Reaktionen

5
Reaktionsaufzeichnung erstellen
Reaktionsgleichung von HRID 223766
HRID 223766als Edukt
Reaktionsgleichung von HRID 1679180
HRID 1679180als Edukt
Reaktionsgleichung von HRID 1679181
HRID 1679181als Edukt
Reaktionsgleichung von HRID 1679182
HRID 1679182als Edukt
Reaktionsgleichung von HRID 1679183
HRID 1679183als Edukt

Notizen zur Verbindung

Auf dieser SeiteGrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
ChEBI
CHEBI:230449
UNII
769GO8W6QQ
EC Number
204-876-7
Nikkaji
J55.519C
Physical Description · 3 Einträge

Crystals or liquid. Becomes anhydrous at 266 °F. (NTP, 1992)

Liquid

40% aqueous solution: Yellow liquid; [HSDB] Off-white to cream colored flakes; [MSDSonline]

Dissociation ConstantspKa = 5.4 for the organic portion /Estimated/

Physikochemische Eigenschaften

Schmelzpunkt
120 · 120-122 °C (dec.)(lit.)
Dichte
1.17 · 1.17
Dampfdruck
0 Pa · 0Pa at 25℃
storage temp.
0 · 0-6°C
Löslichkeit
Soluble in water
Aggregatzustand
powder to crystal
Farbe
White to Almost white
Wichte
1.18 · 1.18
Wasserlöslichkeit
374 g/L · 374g/L at 20℃
BRN
3569024 · 3569024
InChI
1S/C3H7NS2.Na/c1-4(2)3(5)6;/h1-2H3,(H,5,6);/q;+1/p-1
InChIKey
NQVBYQPOGVWUPK-UHFFFAOYSA-M
SMILES
CN(C)C(=S)S[Na]
LogP
-1 at · -1 at 20℃
CAS Datenbank
128 · 128-04-1(CAS DataBase Reference)
EPA chemische Informationen
Sodium dimethyldithiocarbamate (128-04-1)
Sodium dimethyldithiocarbamate is an indirect food additive for use only as a component of adhesives.
Reactive GroupThiocarbamate Esters and Salts/Dithiocarbamate Esters and Salts
Special Reports · 2 Einträge

EPA/Office of Pollution Prevention and Toxics; High Production Volume (HPV) Challenge Program's Robust Summaries and Test Plans. Available from: http://www.epa.gov/chemrtk/viewsrch.htm on Carbamodithioic acid, dimethyl-, sodium salt as of November 3, 2004.

The U.S. high production volume (HPV) chemicals are those which are manufactured in or imported into the United States in amounts equal to or greater than one million pounds per year. Robust Summaries include health effects, ecotoxicity data, and environmental fate information for selected chemicals. EPA/Office of Pollution Prevention and Toxics; High Production Volume (HPV) Challenge Program's Robust Summaries and Test Plans. Available from: http://www.epa.gov/chemrtk/viewsrch.htm on Carbamodithioic acid, dimethyl-, sodium salt as of November 3, 2004.

FIFRA Requirements · 2 Einträge

A tolerance is established for residues of the fungicide sodium dimethyldithio-carbamate, calculated as zinc ethylenebisdithiocarbamate, in or on melon.

As the federal pesticide law FIFRA directs, EPA is conducting a comprehensive review of older pesticides to consider their health and environmental effects and make decisions about their future use. Under this pesticide reregistration program, EPA examines health and safety data for pesticide active ingredients initially registered before November 1, 1984, and determines whether they are eligible for reregistration. In addition, all pesticides must meet the new safety standard of the Food Quality Protection Act of 1996. Pesticides for which EPA had not issued Registration Standards prior to the effective date of FIFRA '88 were divided into three lists based upon their potential for human exposure and other factors, with List B containing pesticides of greater concern and List D pesticides of less concern. Sodium dimethyldithiocarbamate is found on List B. Case No: 2180; Pesticide type: fungicide, antimicrobial; Case Status: OPP is reviewing data from the pesticide's producers regarding its human health and/or environmental effects, or OPP is determining the pesticide's eligibility for reregistration and developing the RED document.; Active ingredient (AI): sodium dimethyldithiocarbamate; Data Call-in (DCI) Date(s): 9/27/91; AI Status: The producers of the pesticide have made commitments to conduct the studies and pay the fees required for reregistration, and are meeting those commitments in a timely manner.

Reactivity ProfileFlammable gases are generated by the combination with aldehydes, nitrides, and hydrides. Incompatible with acids, peroxides, and acid halides.
Air and Water ReactionsSlowly decomposes in aqueous solution to form carbon disulfide and methylamine or other amines. Such decompositions are accelerated by acids.
Hazard Classes and Categories · 4 Einträge

Acute Tox. 4 (12.2%)

Acute toxicity (Oral) - Category 4

Acute toxicity (Oral) - Category 4

Teratogens

Sicherheit und Schutzausrüstung

Fire FightingFires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
First Aid · 1 Eintrag

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

Nonfire Spill Response · 1 Eintrag

SMALL SPILLS AND LEAKAGE: If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.

Disposal Methods · 1 Eintrag

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.

Allowable TolerancesA tolerance of 25 parts per million is established for residues of the fungicide sodium dimethyldithiocarbamate, calculated as zinc ethylenebisdithiocarbamate, in or on melon.
Personal Protective Equipment (PPE) · 1 Eintrag

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)

Toxikologische Informationen

Ecotoxicity Values · 5 Einträge

LC50 Poecilia reticulata 2.6 mg/L/96 hr /Conditions of bioassay not specified in source examined/

LC50 Salmo gairdneri (early life stage) 6.4 ug/L/60 day /Conditions of bioassay not specified in source examined/

LC50 Cyprinodon variegatus (Sheepshead minnow) 107 mg/L/24 hr; 63.0 mg/L/48 hr; 60.1 mg/L/72 hr, 96 hr; flow-through

LC50 Oncorhynchus mykiss (Rainbow trout) 32.2 mg/L/24 hr; 7.12 mg/L/48 hr; 6.69 mg/L/72 hr, 96 hr; flow-through

For more Ecotoxicity Values (Complete) data for SODIUM N,N-DIMETHYLDITHIOCARBAMATE (16 total), please visit the HSDB record page.

Environmental Fate · 3 Einträge

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 2.2(SRC), determined from a water solubility of 1X10+6 mg/L (miscible)(2) and a regression-derived equation(3), indicates that sodium N,N-dimethylthithiocarbamate is expected to have very high mobility in soil(SRC). Hydrolysis half-life of 18 minutes, 25.9, and 433.3 hours were reported for sodium N,N-dimethylthithiocarbamate at pH 5, 7, and 9, respectively(2); this compound would be expected to hydrolyze in moist neutral or acidic soils(SRC). The estimated pKa of sodium N,N-dimethydithiocarbamate is 5.4(6), indicating that this compound will primarily exist in the dissociated form at environmentally relevant pHs; therefore, volatilization from moist soil surfaces is not expected to be an important fate process(SRC). Sodium N,N-dimethylthithiocarbamate is not expected to volatilize from dry soil surfaces since it is a salt and will be nonvolatile(SRC). Photolysis in aqueous solution and on soil was found to be an important degradation process for a related compound, ziram(4), and may also be important for sodium N,N-dimethylthithiocarbamate(SRC). Sodium N,N-dimethylthithiocarbamate, present at 100 mg/L, reached 2% of its theoretical BOD in 28 days at 25 °C using an activated sludge inoculum at 30 mg/L and the Japanese MITI test(5); however, this result may be due to the biocidal properties of sodium N,N-dimethylthithiocarbamate(SRC). In an anaerobic degradation test with sodium N,N-dimethylthithiocarbamate, tetramethyl thiuram disulfide and tetramethyl thiuram monosulfide were the major decomposition products(2).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 2.2(SRC), determined from a water solubility of 1X10+6 mg/L (miscible)(2) and a regression-derived equation(3), indicates that sodium N,N-dimethylthithiocarbamate is not expected to adsorb to suspended solids and sediment(SRC). The estimated pKa of sodium N,N-dimethylthithiocarbamate is 5.4(6), indicating that this compound will primarily exist in the dissociated form at environmentally relevant pHs; therefore, volatilization from moist soil surfaces is not expected to be an important fate process(SRC). Bioconcentration is not expected to be a significant fate for sodium N,N-dimethylthithiocarbamate, due to its rapid hydrolysis at neutral and acidic pH(2) and its ionic character(SRC). Hydrolysis half-life of 18 minutes, 25.9, and 433.3 hours were reported for sodium N,N-dimethylthithiocarbamate at pH 5, 7, and 9, respectively(2). Photolysis in aqueous solution was found to be an important degradation process for a related compound, ziram(4), and may also be important for sodium N,N-dimethylthithiocarbamate(SRC). Sodium N,N-dimethylthithiocarbamate, present at 100 mg/L, reached 2% of its theoretical BOD in 28 days at 25 °C using an activated sludge inoculum at 30 mg/L and the Japanese MITI test(5); however, this result may be due to the biocidal properties of sodium N,N-dimethylthithiocarbamate(SRC). In an anaerobic degradation test with sodium N,N-dimethylthithiocarbamate, tetramethyl thiuram disulfide and tetramethyl thiuram monosulfide were the major decomposition products(2).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), sodium N,N-dimethylthithiocarbamate will solely in the particulate phase in the ambient atmosphere, since it is a salt and will be nonvolatile(SRC). Particulate-phase sodium N,N-dimethylthithiocarbamate will be removed from the atmosphere by wet and dry deposition(SRC).

Adverse EffectsSkin Sensitizer - An agent that can induce an allergic reaction in the skin.
Ecotoxicity Excerpts · 1 Eintrag

/AQUATIC SPECIES/ Early life stages of Salmo gairdneri, from the fertilized egg to the early fry stage, were continuously exposed to various dialkyldithiocarbamates (DDCs), ethylenebisdithiocarbamates (BDCs) and a number of degradation products. Both DDCs and BDCs induced embryotoxicity, but DDCs were generally found to be more toxic than BDCs. For some DDCs adverse effects, below ppb-level were observed. All compounds, including carbon disulfide, were shown to have teratogenic properties. The most striking effects were severe spinal and vertebral abnormalities, mostly associated with retarded yolk sac resorption. /Dialkyldithiocarbamates/

Soil Adsorption/Mobility · 1 Eintrag

The Koc of sodium N,N-dimethylthithiocarbamate is estimated as 2.2(SRC), using a water solubility of sodium N,N-dimethylthithiocarbamate(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that sodium N,N-dimethylthithiocarbamate is expected to have very high mobility in soil. Hydrolysis half-life of 18 minutes, 25.9, and 433.3 hours were reported for sodium N,N-dimethylthithiocarbamate at pH 5, 7, and 9, respectively(1);this compound would be expected to hydrolyze in moist neutral or acidic soils(SRC).

Artificial Pollution Sources · 1 Eintrag

Sodium N,N-dimethylthithiocarbamate's production and use as a disinfectant, corrosion inhibitor, coagulant, vulcanizing agent, chelating agent, and fungicide(1) may result in its release to the environment through various waste streams(SRC). Sodium N,N-dimethylthithiocarbamate is used in water treatment, the rubber industry and is a registered biocide for cutting oils and aqueous systems in industries such as leather tanning and paper manufacturing(2). It is also used as an antimicrobial agent in paints(3).

Environmental Biodegradation · 1 Eintrag

Sodium N,N-dimethylthithiocarbamate, present at 100 mg/L, reached 2% of its theoretical BOD in 28 days at 25 °C using an activated sludge inoculum at 30 mg/L and the Japanese MITI test(1); however, this result may be due to the biocidal properties of sodium N,N-dimethylthithiocarbamate(SRC). In an anaerobic degradation test with sodium N,N-dimethylthithiocarbamate, tetramethyl thiuram disulfide and tetramethyl thiuram monosulfide were the major decomposition products(2).

Environmental Bioconcentration · 1 Eintrag

The estimated pKa of sodium N,N-dimethylthithiocarbamate is 5.4(1), indicating that this compound will primarily exist in the dissociated form at environmentally relevant pHs. Bioconcentration is not expected to be a significant fate for sodium N,N-dimethylthithiocarbamate, due to its rapid hydrolysis at neutral and acidic pH(2) and its ionic character(SRC). Hydrolysis half-life of 18 minutes, 25.9, and 433.3 hours were reported for sodium N,N-dimethylthithiocarbamate at pH 5, 7, and 9, respectively(2).

Volatilization from Water/Soil · 1 Eintrag

The estimated pKa of sodium N,N-dimethylthithiocarbamate is 5.4(1), indicating that this compound will primarily exist in the dissociated form at environmentally relevant pHs; therefore, volatilization from moist soil surfaces is not expected to be an important Sodium N,N-dimethylthithiocarbamate is not expected to volatilize from dry soil surfaces since it is a salt and will be nonvolatile(SRC).

Non-Human Toxicity Excerpts · 5 Einträge

/LABORATORY ANIMALS: Acute Exposure/ Rabbits received single doses of 0.5-1.5 g /dimethyldithiocarbamic acid, sodium salt//kg bw. The intake was accompanied by excitation with subsequent CNS inhibition, reduced tactile and pain sensitivity and decreased food consumption. Hematology and ECG changes were noted. Animals given 1.0 and 1.5 g/kg bw died within 24 hours. The lowest dose caused no mortality. Gross pathology examination revealed visceral congestion and pulmonary edema, hyperemia and focal hemorrhages in the gastric mucosa and intestinal swelling. The relative weights of the lungs, heart, and stomach were increased.

/LABORATORY ANIMALS: Acute Exposure/ 0.5 mL of the test substance /(Vancide (Registered Trademark) 51 (27.6% SDMC, 2.4% SMBT aqueous solution, pH 11.6))/ was applied to the shaved skin of six /New Zealand/ albino rabbits for four hours. The mean Primary Irritation Index was 1.67. Slightly irritating.

/LABORATORY ANIMALS: Acute Exposure/ The toxic effects of dithiocarbamates following parenteral administration was investigated in-vivo. Blood glucose, tissue concentrations of glycogen, glucose-6-phosphate and lactic-acid were measured. Male Osborne-Mendel-rats were given intraperitoneal injections of 2.5 mL/kg sodium-dimethyldithiocarbamate (DMDC), zinc-dimethyldithiocarbamate (ziram), or ferric-dimethyldithiocarbamate (ferbam). ...Two hours after injection, samples of whole blood, liver, and gastrocnemius muscle were taken. All three dimethyldithiocarbamate salts produced a glycogenolytic effect. ...Depression and loss of mobility of the hind limbs were observed in most animals.

/LABORATORY ANIMALS: Subchronic or Prechronic Exposure/ Body weight gain was increased in rabbits given 100 mg/kg bw (in an aqueous solution) for 15 weeks, as compared to the controls. Adynamia, changes in blood morphology, in the /nervous system/, and cardiovascular systems were noted. The fur of animals was ungroomed and had turned yellow.

For more Non-Human Toxicity Excerpts (Complete) data for SODIUM N,N-DIMETHYLDITHIOCARBAMATE (9 total), please visit the HSDB record page.

Evidence for CarcinogenicityCancer Classification: Likely to be Carcinogenic to Humans
Environmental Abiotic Degradation · 1 Eintrag

Hydrolysis half-lives of 18 minutes, 25.9, and 433.3 hours were reported for sodium N,N-dimethylthithiocarbamate at pH 5, 7, and 9, respectively(1). Photolysis in aqueous solution and on soil was found to be an important degradation process for a related compound, ziram(2), and may also be important for sodium N,N-dimethylthithiocarbamate(SRC).

Regulatorische Informationen

FDA RequirementsSodium dimethyldithiocarbamate is an indirect food additive for use only as a component of adhesives.
FIFRA Requirements · 2 Einträge

A tolerance is established for residues of the fungicide sodium dimethyldithio-carbamate, calculated as zinc ethylenebisdithiocarbamate, in or on melon.

As the federal pesticide law FIFRA directs, EPA is conducting a comprehensive review of older pesticides to consider their health and environmental effects and make decisions about their future use. Under this pesticide reregistration program, EPA examines health and safety data for pesticide active ingredients initially registered before November 1, 1984, and determines whether they are eligible for reregistration. In addition, all pesticides must meet the new safety standard of the Food Quality Protection Act of 1996. Pesticides for which EPA had not issued Registration Standards prior to the effective date of FIFRA '88 were divided into three lists based upon their potential for human exposure and other factors, with List B containing pesticides of greater concern and List D pesticides of less concern. Sodium dimethyldithiocarbamate is found on List B. Case No: 2180; Pesticide type: fungicide, antimicrobial; Case Status: OPP is reviewing data from the pesticide's producers regarding its human health and/or environmental effects, or OPP is determining the pesticide's eligibility for reregistration and developing the RED document.; Active ingredient (AI): sodium dimethyldithiocarbamate; Data Call-in (DCI) Date(s): 9/27/91; AI Status: The producers of the pesticide have made commitments to conduct the studies and pay the fees required for reregistration, and are meeting those commitments in a timely manner.

Sicherheitsdaten

F
21
wgk
-
tsca
TSCA listed
ridadr
UN 3082 9 / PGIII
hs_code
29302000
RTECS-Nr.
FD3500000
risk_code
22-36-50
hazard_code
Xn,N
safety_code
26-36-61
hazard_class
9
packing_group
III
Speicherklasse
10 - Combustible liquids
Giftige Stoffe Daten
128-04-1(Hazardous Substances Data)
Hazard Classifications
Aquatic Acute 1
Industry UsesReducing agent
Methods of ManufacturingSDMC is manufactured by combining dimethylamine with carbon disulfide in a solution of sodium hydroxide, forming the water-soluble dithiocarbamate salt.
General Manufacturing Information · 3 Einträge

Oil and Gas Drilling, Extraction, and Support activities

Carbamodithioic acid, N,N-dimethyl-, sodium salt (1:1): ACTIVE

Photodegradation product of tetramethylthioram disulfide.

Anwendungen · 2 Einträge

BeschreibungDithiocarbamates (DCs) are a well-known group of pesticides which have been used to control a number of species belonging to taxonomically different groups, e.g., bacteria, fungi, nematodes, and molluscs for over 60 years. The first integrated product containing sodium dimethyldithiocarbamate (SDMC) was registered in 1949.

VerwendenSodium dimethyldithiocarbamate(SDMC) is used as a disinfectant, corrosion inhibitor, coagulant, vulcanizing agent, chelating agent, and fungicide. SDMC is used in water treatment, the rubber industry, and is a registered biocide for cutting oils and aqueous systems in industries such as leather tanning and paper manufacturing. It is also used as an antimicrobial agent in paints. generally SDMC are able to function as metal chelators and have been used in metal finishing operations and wastewater treatments to enhance the precipitation of metals. As a free radical inhibitor, it has been used in the rubber industry to rapidly stop the polymerization of synthesis. It is also used as a biocide for cutting oils and aqueous systems such as leather tanning and paper manufacturing.

Darstellung

synthetischeSodium dimethyldithiocarbamate is prepared by combining dimethylamine with carbon disulfide in a solution of sodium hydroxide, forming the water-soluble dithiocarbamate salt.

Vor- und nachgelagerte Produkte

Vorgelagerte Rohstoffe

KohlendisulfidNatriumhydroxidN-Methylmethanamin, gasförmig

Nachgelagerte Produkte

ZiramAsoMateThiram2-Mercapto-5-methylbenzoxazole5-Chlor-2-mercaptobenzothiazolDimethyldithiocarbamic acid allyl ester1,4-Butandiylbis(dimethyldithiocarbamat)