StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
Huagongshe Open Project:[email protected]KI-Anbindung: llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.7.8
  1. Startseite
  2. /Verbindung

Bleiazid

Lead azide (Pb(N3)2)

HCID 61600
NotizenReaktionen
GrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
TeilstruktursucheÄhnliche Strukturen suchen

Grundinformationen

CAS
13424-46-9
Standard-SMILES
[N-]=[N+]=[N][Pb][N]=[N+]=[N-]
InChIKey
ISEQAARZRCDNJH-UHFFFAOYSA-N
Summenformel
N6Pb
Durchschnittliche Molmasse
291 g/mol

Überblick

Lead azide appears as needles or white powder. Explodes at 350 °C. Insoluble in water. May explode from shock, heat, flame or friction when dry. The primary hazard is the blast effect of an instantaneous explosion and not flying projectiles and fragments.

Namen und Bezeichner

Bevorzugter Name
Lead azide (Pb(N3)2)
IUPAC
diazidolead
Lokaler Name
Bleiazid
Englischer Name
Lead azide
Summenformel
N6Pb
Molmasse
291.2402

Namen und Synonyme

Lead diazideLEAD AZIDELead(2+) azideLead azide (P6N6)Lead azide (Pb(N3)2)RD 1333677QUF0Z7PDIAZIDOPLUMBANERefChem:152619LEAD AZIDE (PBN6)DTXCID5034199236-542-1
Weitere Namen anzeigen
plumbous azideLead(II)diazideDiazidolead(II)Lead(II) azide.lead diazide lead azideLead azide ISO 9001:2015 REACH
13424-46-9DTXSID4065448RD-1333Lead(II) azideLead azide (dry) [Forbidden]Lead azide (dry)EINECS 236-542-1UN0129

Datenbank-Bezeichner

CAS
13424-46-9
PubChem CID
61600
EC Number
236-542-1
Nikkaji
J38.140C

Eigenschaften

Berechnete Struktureigenschaften

Polarare Oberfläche (TPSA)
28,7 Ų
H-Brücken-Donoren
0
H-Brücken-Akzeptoren
4
Frei drehbare Bindungen
2
Schwere Atome
7
Formalladung
0
Komplexität
107

Experimentelle und physikochemische Eigenschaften

Chemical ClassesOther Uses -> Explosives
Density4.7 g/cu cm
Color/Form · 2 Einträge

Needles or white powder

Colorless orthorhombic needles

Solubility · 2 Einträge

Freely sol in acetic acid; insol in ammonium hydroxide

In water, 0.023% at 18 °C, 0.09% at 70 °C

DecompositionLead azide decomposes at 250 °C.
Melting PointDecomposes at 190 °C
Physical Description · 2 Einträge

Lead azide appears as needles or white powder. Explodes at 350 °C. Insoluble in water. May explode from shock, heat, flame or friction when dry. The primary hazard is the blast effect of an instantaneous explosion and not flying projectiles and fragments.

White needles or powder; [CAMEO]

Stability/Shelf Life · 3 Einträge

Explodes on percussion.

Develops a brown film when exposed to sunlight.

Lead azide has a good shelf life in dry conditions, but is unstable in the presence of moisture, oxidizing agents, and ammonia.

Sicherheit und Regulatorisches

Sicherheitsangaben dienen nur zur Orientierung und ersetzen weder das Sicherheitsdatenblatt (SDB) des Lieferanten noch geltende Vorschriften oder eine fachliche Bewertung.

GHS-Klassifizierung

GHS Classification · 6 Einträge

Danger

H200: (Deleted) Unstable Explosive [Danger Explosives]

P201, P202, P203, P260, P261, P264, P270, P271, P273, P280, P281, P301+P317, P304+P340, P317, P318, P319, P330, P372, P373, P380, P391, P401, P405, and P501 (click each P-code to see the statement)

Danger

H201: (Deleted) Explosive; mass explosion hazard [Danger Explosives]

P203, P210, P230, P240, P250, P260, P261, P264, P270, P271, P273, P280, P301+P317, P304+P340, P317, P318, P319, P330, P370+P380, P372, P373, P391, P401, P405, and P501 (click each P-code to see the statement)

Gefahrenhinweise

Regulatory Information · 6 Einträge

Chemical: Lead azide (Pb(N3)2)

Hazard Traits - Reproductive Toxicity

Status: Active Update: 10-01-2022 https://echa.europa.eu/registration-dossier/-/registered-dossier/14345

Restricted substance: Lead diazide

Substance: Lead diazide, Lead azide

LEAD AZIDE, WETTED with not less than 20% water, or mixture of alcohol and water, by mass: HSNO Approval: HSR100257 Approved with controls

Other Safety InformationIMAP assessments - Explosive Lead salts: Human health tier II assessment
DOT LabelExplosive 1.1A
Fire HazardsExcerpt from ERG Guide 112 [Explosives - Division 1.1, 1.2, 1.3 or 1.5]:
Health HazardsExcerpt from ERG Guide 112 [Explosives - Division 1.1, 1.2, 1.3 or 1.5]:
Hazards Summary · 1 Eintrag

Unstable when dry, and may explode after shock, heat, or friction; [CAMEO] Emits fumes of lead and nitrogen oxides when heated; [Sax] Keep submerged in water when handling; Explodes at 660 deg F; Reported cause of explosions in laboratories after azide poured down sinks and comes in contact with lead in pipes; [Hawley] Workers handling this substance are at risk for lead poisoning; [NJ-HSFS] See AZIDES. See Lead and linked occupational diseases.

Chemie und Industrie

Pharmakologische Informationen

Metabolism/Metabolites · 1 Eintrag

Lead is absorbed following inhalation, oral, and dermal exposure. It is then distributed mainly to the bones and red blood cells. In the blood lead may be found bound to serum albumin or the metal-binding protein metallothionein. Organic lead is metabolized by cytochrome P-450 enzymes, whereas inorganic lead forms complexes with delta-aminolevulinic acid dehydratase. Lead is excreted mainly in the urine and faeces. (L136)

Verwendung und Herstellung

Uses · 5 Einträge

Used on the tip of an explosive catheter in micro-explosion cystolithotripsy; [ChemIDplus] Used in military ammunition and in blasting caps; [Sax] Used as a primer in explosives; [Merck Index, 5401]

Lead azide (dry) is forbidden for transport by any means; [HMT]

Used with lead styphnate and aluminum (ASA /lead azide; lead styphnate; lead aluminum/ mixtures) for military detonators, in a mixture with tetrazene, and in a composite arrangement topped with more sensitive composition

As a primer in explosives (in the form of dextrinated lead azide)

Lead azide is used in detonators. (L407)

Methods of Manufacturing · 2 Einträge

... Produced continuously by the reaction of lead nitrate or acetate with sodium azide in aqueous solution under basic conditions to avoid formation of hydrazoic acid, which explodes readily. The crystal size must be carefully controlled, large crystals being dangerous, by controlling the stirring and by using wetting agents. Demineralized water must be used. With thickeners such as dextrin, sodium carboxymethylcellulose, or poly(vinyl alcohol), purities from 92% to 99% are possible, the former containing 3% dextrin and 4 - 5% Pb(OH)2.

Prepared from sodium azide and lead nitrate.

Formulations/PreparationsLead azide can exist in two allotropic forms, the more stable, orthorhombic alpha-form, and the monoclinic beta-form.
General Manufacturing Information

Zugehörige Reaktionen

1
Reaktionsaufzeichnung erstellen
Reaktionsgleichung von HRID 287278
HRID 287278als EduktTraining data from https://doi.org/10.1039/C8SC04228D (8/10)

Notizen zur Verbindung

Wird geladen…

Auf dieser SeiteGrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
Other Experimental Properties · 2 Einträge

Explodes at around 350 °C

Heat of formation: +110.5 kcal/mol at 25 °C

Physikochemische Eigenschaften

Dichte
4.7 · 4.700
Löslichkeit
2 OAc · very soluble in H2OAc
Aggregatzustand
colorless orthorhombic needles
Farbe
colorless orthorhombic needles; explodes, explosive
Wasserlöslichkeit
0.023 % · 0.023% H2O (18°C), 0.09% (70°C) [MER06]; insoluble NH4OH; very soluble acetic acid [KIR78]
CAS Datenbank
13424 · 13424-46-9
EPA chemische Informationen
Lead(II) azide (13424-46-9)
Reactive GroupAzo, Diazo, Azido, Hydrazine, and Azide Compounds
RCRA Requirements · 1 Eintrag

D008; A solid waste containing lead may or may not become characterized as a hazardous waste when subjected to the Toxicity Characteristic Leaching Procedure listed in 40 CFR 261.24, and if so characterized, must be managed as a hazardous waste. /Lead/

Reactivity AlertsExplosive
OSHA StandardsRegulated by OSHA as a Class A Explosive
Reactivity Profile · 1 Eintrag

LEAD AZIDE is unstable. May, when dry, decompose explosively if shocked, heated or subjected to friction. Forms violently explosive products with carbon disulfide. Can be sensitized to explosive decomposition by metal salts (copper or zinc) or by traces of strong acids [Sax, 9th ed., 1996, p. 298]. An explosion occurred by mixing lead azide with 0.5% of calcium stearate, [MCA Case History No. 949].

DOT Hazard Classification · 5 Einträge

Lead azide (dry)

Forbidden explosives/materials (49 eCFR § 173.54/§ 173.21)

Lead azide, wetted with not less than 20 percent water or mixture of alcohol and water, by mass

UN0129

Div 1.1 Explosives (with a mass explosion hazard) (49 eCFR § 173.50)

Sicherheit und Schutzausrüstung

Fire FightingExcerpt from ERG Guide 112 [Explosives - Division 1.1, 1.2, 1.3 or 1.5]:
First AidExcerpt from ERG Guide 112 [Explosives - Division 1.1, 1.2, 1.3 or 1.5]:
Firefighting HazardsThe primary hazard is blast where the entire load can explode instantaneously and not from flying projectiles and fragments. /Lead azide, wetted/
Exposure Control and Personal ProtectionBiological Exposure Indices (BEI) [ACGIH] - Lead in blood = 200 ug/L (20 ug/100 ml); sampling time not critical; [ACGIH]
Fire Fighting Procedures · 3 Einträge

If material on fire or involved in fire: Dangerously explosive. Do not fight fires in a cargo of explosives. Evacuate area and let burn. /Lead azide, wetted/

Evacuation: If the material is on fire or involved in fire consider evacuation of one (1) mile radius. /Lead azide, wetted/

Wear positive pressure self-contained breathing apparatus when fighting fires involving this material. /Lead azide, wetted/

Nonfire Spill ResponseExcerpt from ERG Guide 112 [Explosives - Division 1.1, 1.2, 1.3 or 1.5]:
Disposal Methods · 1 Eintrag

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal and plant life; and conformance with environmental and public health regulations.

Preventive Measures · 3 Einträge

If material not on fire and not involved in fire: Keep sparks, flames, and other sources of ignition away. Keep spilled material wet. Wet spilled material before picking it up. Do not attempt to sweep up dry material. /Lead azide, wetted/

Personnel protection: Avoid breathing dusts, and fumes from burning material ... Do not handle broken packages unless wearing appropriate personal protective equipment. Wash away any material which may have contacted the body with copious amounts of water or soap and water. /Lead azide, wetted/

Future accumulations of lead-azide and copper-azide can be retarded by thoroughly flushing the drains /where sodium azide is discharged/ with copious amounts of water several times a day. Use of plumbing free of lead or copper or of reagents that do not contain azides are recommended. Procedures for decontaminating plumbing that currently contain explosive azides are given.

Isolation and EvacuationExcerpt from ERG Guide 112 [Explosives - Division 1.1, 1.2, 1.3 or 1.5]:
Minimum Risk LevelChronic Inhalation: 0.05 mg/m3 (L134)
Threshold Limit Values (TLV) · 5 Einträge

0.05 [mg/m3], as Pb

8 hr Time Weighted Avg (TWA): 0.05 mg/cu m. /Lead and inorganic compounds, as Pb/

Excursion Limit Recommendation: Excursions in worker exposure levels may exceed 3 times the TLV-TWA for no more than a total of 30 minutes during a work day, and under no circumstances should they exceed 5 times the TLV-TWA, provided that the TLV-TWA is not exceeded. /Lead and inorganic compounds, as Pb/

A3; Confirmed animal carcinogen with unknown relevance to humans. /Lead and inorganic compounds, as Pb/

Biological Exposure Index (BEI): Determinant: lead in blood; Sampling Time: not critical; BEI: 30 ug/100 mL. [Note: Women of child bearing potential, whose blood Pb exceeds 10 ug/dL, are at risk of delivering a child with a blood Pb over the current Centers for Disease Control guideline of 10 ug/dL. If the blood Pb of such children remains elevated, they may be at increased risk of cognitive deficits. The blood Pb of these children should be closely monitored and appropriate steps should be taken to minimize the child's exposure to environmental lead.] /Lead/

Permissible Exposure Limit (PEL)0.05 [mg/m3], as Pb

Toxikologische Informationen

TreatmentLead poisoning is usually treated with chelation therapy using DMSA, EDTA, or dimercaprol. (L21)
Health Effects · 1 Eintrag

Lead is a neurotoxin and has been known to cause brain damage and reduced cognitive capacity, especially in children. Lead exposure can result in nephropathy, as well as blood disorders such as high blood pressure and anemia. Lead also exhibits reproductive toxicity and can results in miscarriages and reduced sperm production. (L21)

Adverse EffectsNeurotoxin - Predominantly motor
Exposure RoutesOral (L136) ; inhalation (L136); dermal (L136)
Toxicity Summary · 1 Eintrag

Lead mimics other biologically important metals, such as zinc, calcium, and iron, competing as cofactors for many of their respective enzymatic reactions. For example, lead has been shown to competitively inhibit calcium's binding of calmodulin, interferring with neurotransmitter release. It exhibits similar competitive inhibition at the NMDA receptor and protein kinase C, which impairs brain microvascular formation and function, as well as alters the blood-brain barrier. Lead also affects the nervous system by impairing regulation of dopamine synthesis and blocking evoked release of acetylcholine. However, it's main mechanism of action occurs by inhibiting delta-aminolevulinic acid dehydratase, an enzyme vital in the biosynthesis of heme, which is a necesssary cofactor of hemoglobin. (T4, A20, A22, L136)

Signs and Symptoms · 1 Eintrag

Symptions of chronic lead poisoning include reduced cognitive abilities, nausea, abdominal pain, irritability, insomnia, metal taste in the mouth, excess lethargy or hyperactivity, chest pain, headache and, in extreme cases, seizures, comas, and death. There are also associated gastrointestinal problems, such as constipation, diarrhea, vomiting, poor appetite, weight loss, which are common in acute poisoning. (A2, L21)

Human Toxicity Excerpts · 2 Einträge

/OTHER TOXICITY INFORMATION/ ... Long-term use of lead azide and lead styphnate as primary explosives has resulted in lead contamination at artillery and firing ranges and become a major health hazard and environmental problem for both military and civilian personnel...

/OTHER TOXICITY INFORMATION/ Sodium-azide, a common preservative used in automatic blood counters ... was associated with a number of violent explosions at hospitals in the United States and Canada. These were due primarily to azides accumulating in the drains and plumbing. After completing the blood count procedure, the waste (containing azide) was usually flushed into a drain, bathing the drain with solutions of sodium-azide. Over a period of time, the azide reacted with copper, lead, brass, or solder in the plumbing system to form an accumulation of lead-azide or copper-azide.

Carcinogen Classification2A, probably carcinogenic to humans. (L135)
Antidote and Emergency Treatment · 3 Einträge

/SRP:/ Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Lead and related compounds/

/SRP:/ Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for shock and treat if necessary ... . Anticipate seizures and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool ... . Administer activated charcoal ... . /Lead and related compounds/

/SRP:/ Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious or is in severe respiratory distress. Moderate hyperventilation (20 respiration per minute) may be beneficial for increased intracranial pressure. Start IV administration of 0.9% saline (NS) or lactated Ringer's (LR) /SRP: "To keep open", minimal flow rate/. For hypotension ... . Treat seizures with diazepam or lorazepam ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Lead and related compounds/

Regulatorische Informationen

RCRA Requirements · 1 Eintrag

D008; A solid waste containing lead may or may not become characterized as a hazardous waste when subjected to the Toxicity Characteristic Leaching Procedure listed in 40 CFR 261.24, and if so characterized, must be managed as a hazardous waste. /Lead/

DHS Chemicals of Interest (COI) · 6 Einträge

Lead azide

A Commercial Grade

5000

A Commercial Grade

400

Explosive chemical that can be released at a facility.

Sicherheitsdaten

tsca
TSCA listed
ridadr
UN 0129
risk_code
61-3-20/22-33-50/53-62
hazard_code
E,T,N
safety_code
53-45-60-61
hazard_class
1.1
Giftige Stoffe Daten
13424-46-9(Hazardous Substances Data)
· 4 Einträge

Lead azide (Pb(N3)2): ACTIVE

/Lead azide/ should always be handled submerged in water

Lead azide was discovered by Curtius in 1891, and was developed after World War I

Lead azide replaced mercury fulminate in detonators

Anwendungen · 3 Einträge

BeschreibungBleiazid bildet farblose Kristalle mit einem Detonationspunkt von 350 ℃. Es ist nahezu unlöslich in Wasser (0.023% bei 18 ℃; 0.09% bei 70 ℃), Alkohol und Ether. Die Kristalle sind unempfindlich gegen Wärme und Feuchtigkeit, allerdings nicht gegen Kohlenstoffdioxid aus der Luft (Zersetzung unter Angabe von Stickstoffwasserstoffsäure). Bleiazid ist schlagempfindlich (reines Produkt 2,5-4 Nm; techn. Produkt 3-6,5 Nm) und findet Verwendung als Initialsprengstoff, dem zur besseren Entzündbarkeit Bleitrinitroresorcinat beigemischt wird. Als Initialladung wirkt es in geringeren Mengen als Knallquecksilber, besitzt eine höhere Auslösungsgeschwindigkeit als dieses und lässt sich nicht wie dieses schon mit geringen Drucken totpressen.

BeschreibungLead azide is a severe explosion risk and should be handled under water; it is also a primary detonating compound.

VerwendenAs primer in explosives. In the form of dextrinated lead azide.

Darstellung

synthetischeLead azide is prepared by the reaction of sodium azide with lead nitrate: 2NaN3 + Pb(NO3)2 → Pb(N3)2 + 2NaNO3.

Vor- und nachgelagerte Produkte

Vorgelagerte Rohstoffe

Bleidi(acetat)BleidinitratNatriumazid

Anbieter7 Anbieter

陕西缔都新材料有限公司029-63373950 17392216152 · [email protected]
上海湄水化工科技有限公司021-60549325 18616193163
山东小野化学股份有限公司0539-6362799 20)
Shaanxi Didu New Materials Co. Ltd+86-86-17392712779 +86-13289823923 · [email protected]
河南天孚化工有限公司+86-0371-55170693 +86-19937530512 · [email protected]
厦门盈融达化工有限公司+86-0592-6210733 · [email protected]
XIAMEN AMITY INDUSTRY AND TRADE CO., LTD.+8618950047208 · [email protected]