Zurück
HuagongsheHuagongshe Chemie-Druckbericht · Nur für Forschungszwecke
HCID 6568Erstellt: 26. Oktober 2026

(±)-Butan-2-ol

BUTAN-2-OL · rac-(R*)-2-Butanol · S-BUTYL ALCOHOL · 2-HYDROXYBUTANE · 2-Butyl alcohol · (+/-)-2-butanol · BUTYLENE HYDRATE · ETHYLMETHYLCARBINOL

https://huagongshe.com/de/chemical/6568

Molekülstruktur von (±)-Butan-2-ol

Identifikatoren & physikalische Daten

CAS No.15892-23-6
SummenformelC4H10O
Durchschnittliche Molmasse74,12 g/mol
Monoisotopische Masse74,07316494 g/mol
SMILESCCC(C)O
InChIKeyBTANRVKWQNVYAZ-UHFFFAOYSA-N
PubChem CID6568
ChEMBLCHEMBL45462
ChEBICHEBI:35687
EC No.201-158-5
DTXSIDDTXSID9021762
Lokaler Name(±)-Butan-2-ol

Chemische & physikalische Eigenschaften

XLogP0,6
Polarare Oberfläche (TPSA)20,2
H-Brücken-Donoren1
H-Brücken-Akzeptoren1
Frei drehbare Bindungen1
Schwere Atome5
Formalladung0
Komplexität19,6
StoffklassenFlammable agents - 3rd degree
SolventsSolvents -> Alcohols (<C12)
DuftstoffeFragrance Ingredient (2-Butanol) -> IFRA transparency List
LogP (Verteilungskoeffizient)log Kow= 0.61
GeruchHAS A STRONG VINOUS ODORSweetWine odor liquidStrong, pleasant odor
LebensmittelzusatzstoffeFLAVOR ENHANCER, FLAVORING AGENT OR ADJUVANT -> FDA Substance added to food
Dichte0.81 (NIOSH, 2024) - Less dense than waterwill float0.8063 at 20 °C/4 °C1 MG/L IS EQUIVALENT TO 330 PPM & 1 PPM IS EQUIVALENT TO 3.03 MG/CU M AT 25 °C, 760 MM HGDENSITY OF SATURATED AIR 1.05 (AIR = 1)3.14% IN SATURATED AIR @ 30 °CRatio of specific heats of vapor: 1.080Saturated liquid density: 50.190 lb/cu ft at 70 °FLatent heat of vaporization: 243 BTU/lb= 135 cal/g= 5.65X10+5 J/kgReid vapor pressure: 0.2 psiaRelative density (water = 1): 0.810.808 g/mL at 25 °C(lit.)
AromastoffeEU Flavoring substances
Viscosity4.21 cP at 15 °C3.8 mm²/s at 25 °C
Color/FormColorless liquid
Löslichkeit16 % (NIOSH, 2024)125,000 mg/l water at 20 °CSol in 12 parts watermiscible with alcohol and etherVery soluble in acetonemiscible in ethanol and ethyl etherIn water, 181,000 mg/l @ 25 °C
Corrosivitysec-Butyl alcohol will attack some forms of plastics, rubber, and coatings.
Schmelzpunkt−115 °C(lit.)
Siedepunkt98 °C(lit.)
Dampfdichte2.6 (vs air)
Dampfdruck12.5 mm Hg ( 20 °C)
Brechungsindexn20/D 1.397(lit.)
Flammpunkt80 °F
CAS Datenbank15892-23-6(CAS DataBase Reference)

Sicherheit & Vorschriften

GHS-EinstufungWarningH226: Flammable liquid and vapor [Warning Flammable liquids]P210, P233, P240, P241, P242, P243, P261, P264+P265, P271, P280, P303+P361+P353, P304+P340, P305+P351+P338, P319, P337+P317, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)
Regulatorische InformationenChemical: 2-Butanol2-Butanol is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 2-Butanol are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)Status: Active Update: 23-09-2021 https://echa.europa.eu/registration-dossier/-/registered-dossier/143532-Butanol: HSNO Approval: HSR001098 Approved with controlsThe New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)
DOT-KennzeichnungFlammable Liquid
BrandgefahrenExcerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:Flammable. Above 24 °C explosive vapour/air mixtures may be formed.
BrandpotenzialDANGEROUS FIRE HAZARD WHEN EXPOSED TO HEAT OR FLAME.... Flammable liquid ... .Ignites on contact with chromium trioxide.
GesundheitsgefahrenExcerpt from NIOSH Pocket Guide for sec-Butyl alcohol:
GefahrenübersichtA skin, eye, and respiratory tract irritantInhalation of high concentrations can cause CNS depression[ICSC]
DOT-Nummer und Handbuch1120 129
FDA-Anforderungen2-butanol is a food additive permitted for direct addition to food for human consumption, as long as 1) the quantity added to food does not exceed the amount reasonably required to accomplish its intended physical, nutritive, or other technical effect in food, and 2) when intended for use in or on food it is of appropriate food grade and is prepared and handled as a food ingredient.
Reaktive GruppeAlcohols and Polyols
EG-EinstufungSymbol: XiR: 10-36/37-67S: (2)-7/9-13-24/25-26-46Note: C
UN-EinstufungUN Hazard Class: 3UN Pack Group: III
Special ReportsBrusewitz S, Wennberg ACriteria Document for Setting Exposure Limits for Butanol and Butyl Acetate. Arbetarskyddsstryelsen, Publikationsservice, 45 pp. (1984). Contents of this critical literature survey include: usesactivities involving exposure to the title substancestoxicology (metabolic models of isobutanol isomers and butyl acetate), toxicological mechanisms, effects on various organs (in particular the central nervous system), reproductive effectsallergiesgenotoxic effectscarcinogenic effectsexposure indicatorsdose-effect relationsdefinitions.
BrandbekämpfungExcerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:Use water spray, powder, foam, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water.
Erste-Hilfe-MaßnahmenFresh air, rest. Refer for medical attention.Remove contaminated clothes. Rinse skin with plenty of water or shower.First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.Rinse mouth. Give one or two glasses of water to drink. Do NOT induce vomiting. Refer for medical attention .
Erste HilfeExcerpt from NIOSH Pocket Guide for sec-Butyl alcohol:(General first aid procedures)
Sichere LagerungFireproof. Separated from strong oxidants and aluminium.
BrandbekämpfungsverfahrenWATER SPRAY, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICALDo not extinguish fire unless flow can be stopped. Use water in flooding quantities as fog. Solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible.
Lagerbedingungen... STORE IN PLACES THAT ARE COOL ... PROVIDE ADEQUATE VENTILATION ... LOCATE ... STORAGE AREA WELL AWAY FROM AREAS OF FIRE HAZARD ... KEEP ... FROM POWERFUL OXIDIZING AGENTS ... EXPLOSIVES, OR MATERIALS WHICH REACT WITH AIR OR MOISTURE TO EVOLVE HEAT.
Reinigungsverfahren1. REMOVE ALL IGNITION SOURCES. 2. VENTILATE AREA OF SPILL OR LEAK. 3. FOR SMALL QUANTITIES ABSORB ON PAPER TOWELS. EVAPORATE IN SAFE PLACE (SUCH AS FUME HOOD). ALLOW SUFFICIENT TIME FOR EVAPORATING VAPORS TO ... CLEAR HOOD DUCTWORK. BURN PAPER IN SUITABLE LOCATION AWAY FROM COMBUSTIBLE MATERIALS. LARGE QUANTITIES CAN BE COLLECTED AND ATOMIZED IN A SUITABLE COMBUSTION CHAMBER.
Freisetung ohne BrandExcerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:
EntsorgungsverfahrenSRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.1. BY ABSORBING IT IN VERMICULITE, DRY SAND, EARTH OR SIMILAR MATERIAL & DISPOSING IN SECURED SANITARY LANDFILL. 2. BY ATOMIZING IN SUITABLE COMBUSTION CHAMBER.s-Butyl alcohol is a waste chemical stream constituent which may be subjected to ultimate disposal by controlled incineration.Incineration: Spray waste material into the firebox of an incinerator. Combustion may be improved by mixing with a more flammable solvent.
Verschüttetes entsorgenPersonal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. Wash away remainder with plenty of water.
Preventive MeasuresSRP: Contaminated protective clothing should be segregated in such a manner so that there is no direct personal contact by personnel who handle, dispose, or clean the clothing. Quality assurance to ascertain the completeness of the cleaning procedures should be implemented before the decontaminated protective clothing is returned for reuse by the workers. Contaminated clothing should not be taken home at end of shift, but should remain at employee's place of work for cleaning.VENTILATION CONTROL: THE BASIC VENTILATION METHODS ARE LOCAL EXHAUST VENTILATION AND DILUTION OR GENERAL VENTILATION. ... SUBSTITUTION OF LESS IRRITATING SUBSTANCES ... REDESIGN OF OPERATIONS ... PREVENT CONTACT, PROVISION OF A PHYSICAL BARRIER AGAINST CONTACT, PROPER WASHING FACILITIES, WORK CLOTHING AND STORAGE FACILITIES, PROTECTIVE CLOTHING, AND BARRIER CREAMS. MEDICAL CONTROL ...Respirators may be used when engineering and work practice controls are not technically feasible, when such controls are in the process of being installed, or when they fail and need to be supplemented. Respirators may also be used for operations which require entry into tanks or closed vessels, and in emergency situations. ... Clothing wet with liquid sec-butyl alcohol should be placed in closed containers for storage until it can be discarded or until provision is made for the removal of sec-butyl alcohol from the clothing. If the clothing is to be laundered or otherwise cleaned to remove the sec-butyl alcohol, the person performing the operation should be informed of sec-butyl alcohol's hazardous properties. Any clothing which becomes wet with liquid sec-butyl alcohol should be removed immediately and not reworn until the sec-butyl alcohol is removed from the clothing.SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.For more Preventive Measures (Complete) data for SEC-BUTYL ALCOHOL (9 total), please visit the HSDB record page.
Isolation and EvacuationExcerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:
Körperbelastungsec-Butyl alcohol was identified, not quantified, in human blood(1).
Wechselwirkungen... Ethanol, isopropanol, n-butanol, sec-butanol, and tert-butanol ... exert a ... potentiating effect on the acute inhalation toxicity of carbon tetrachloride. ... Interaction between isopropanol & carbon tetrachloride was documented in an industrial accident ... where workers exposed to both agents exhibited hepatotoxicity. With ethanol the potentiation seems to be due to the presence of the unmetabolized alcoholhowever, with isopropanol the effect seems to be caused by the presence of both unmetabolized alcohol and acetone. The results obtained with n-butanol resemble those of ethanol, whereas with 2-butanol they resemble those of isopropanol ... .ADDING 1 G/L OF PROPAN-1-OL, PROPAN-2-OL, BUTAN-1-OL, BUTAN-2-OL, ISOBUTANOL TO 40% ETHANOL IN ORANGE JUICE LOWERED AND DELAYED BLOOD ETHANOL MAX IN TEN 20-30 YR OLD MEN WHO DRANK 3.75 ML/KG OF SYNTHETIC BEVERAGE.2-Butanol at high concentrations potentiated carbon tetrachloride liver toxicity in rodents, probably due to the enhancement of the biotransformation of carbon tetrachloride to cytotoxic metabolites by activation of selective cytochrome p450 isozymes.
ZielorganeEyes, skin, respiratory system, central nervous system
ÖkotoxizitätswerteLD50 Carassius auratus (Goldfish) 4300 mg/l/24 hr /Conditions of bioassay not specified/LC50 Pimephales promelas (fathead minnows) 3670 g/l/96 hr (95% confidence limit 3380-3990 g/l)age 30 days old, water hardness 43.6 mg/l (CaCO3), temp 24.4 °C, pH 7.82, dissolved oxygen 7.5 mg/l, alkalinity 41.4 mg/l (CaCO3) /Type of bioassay not specified/ /dl-2-Butanol/Toxicity Threshold (Cell Multiplication Inhibition Test) Entosiphon sulcatum (protozoa) 1280 mg/lToxicity Threshold (Cell Multiplication Inhibition Test) Uronema parduczi Chatton-Lwoff (protozoa) 1416 mg/lFor more Ecotoxicity Values (Complete) data for SEC-BUTYL ALCOHOL (7 total), please visit the HSDB record page.
UmweltverhaltenTERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 50(SRC), determined from a log Kow of 0.61(2) and a regression-derived equation(3), indicates that sec-butyl alcohol is expected to have high mobility in soil(SRC). Volatilization of sec-butyl alcohol from moist soil surfaces is expected to be an important fate process(SRC) given a Henry's Law constant of 9.06X10-6 atm-cu m/mole(4). The potential for volatilization of sec-butyl alcohol from dry soil surfaces may exist based upon a vapor pressure of 18.3 mm Hg(5). Biodegradation is expected to be an important fate process for this compound in soil surfaces(SRC). sec-Butyl alcohol achieved 44.2 and 72.3% of its theoretical BOD after 10 and 20 day incubation periods, respectively using a domestic sewage sludge inoculum(6).AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 50(SRC), determined from a log Kow of 0.61(2) and a regression- derived equation(3), indicates that sec-butyl alcohol is not expected to adsorb to suspended solids and sediment in water(SRC). Volatilization from water surfaces is expected to be an important fate process(3) based upon a Henry's Law constant of 9.06X10-6 atm-cu m/mole(4). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 2 and 29, days respectively(SRC). According to a classification scheme(5), an estimated BCF of 3(SRC), from its log Kow(2) and a regression-derived equation(6), suggests the potential for bioconcentration in aquatic organisms is low. In a river die-away test, sec-butyl alcohol achieved 55% of its theoretical BOD in 5 days(7), suggesting biodegradation will be an important fate process(SRC).ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), sec-butyl alcohol, which has a vapor pressure of 18.3 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase sec-butyl alcohol is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC). The half-life for the reaction in air with hydroxyl radicals is estimated to be 40 hours(SRC), calculated from its rate constant of 9.6X10-12 cu cm/molecule-sec at 25 °C(3).
Lebensmitteluntersuchungswertesec-Butyl alcohol is found in many diverse food items. It has been identified as a volatile component of baked potatoes(1), apples and pears(2), a gruyere-type cheese, fried bacon, roasted filberts(3), and dry legumes(4). sec-Butyl alcohol was detected in soybeans at concns of 406.3 to 3458.3 ug/kg(5). sec-Butyl alcohol was identified, not quantified, in grain(6).
Unerwünschte WirkungenNeurotoxin - Acute solvent syndrome
ExpositionspfadeThe substance can be absorbed into the body by inhalation of its vapour and by ingestion.inhalation, ingestion, skin and/or eye contact
Signs and SymptomsHeadache. Dizziness. Drowsiness.Dry skin.Redness. Pain.Dizziness. Drowsiness.irritation eyes, skin, nose, throatnarcosis
Effluent ConcentrationsIn a comprehensive survey of wastewater from 4,000 industrial and publicly owned treatment works (POTWs) sponsored by the Effluent Guidelines Division of the U.S. EPA, sec-Butyl alcohol was identified in discharges of the following industrial category (positive occurrences, median concn in ppb): leather tanning (146.7), petroleum refining (1149.3), paint and ink (1324.7), organics and plastics (235.4), pesticides manufacture (136.2), pharmaceuticals (14.6), foundries (141.0), electronics (119.9), mechanical products (390.6), publicly owned treatment works (312.4)(1). The highest effluent concn was 920.1 ppb in the mechanical products industry(1). sec-Butyl alcohol was found in landfill leachate from 1 of 5 sites in Connecticut(2). The concentration of sec-butyl alcohol in this leachate ranged from 6.2 to 14.9 ppm(2). Trench leachate from the Maxey Flats, KY and West Valley, NY disposal sites also contained sec-butyl alcohol(3). sec-Butyl alcohol was identified, not quantified, in the volatile emissions of furniture coatings(4). sec-Butyl alcohol was detected at concns ranging from 1 to 272 mg/cu m in landfill gas from 7 waste disposal sites in the United Kingdom(5). sec-Butyl alcohol was identified, not quantified, in the volatile emissions of common garden waste(6).
Medical Surveillance... Employee who is exposed to sec-butyl alcohol at potentially hazardous levels ... should be screened for history of certain medical conditions ... /skin disease, liver disease, kidney disease, eye disease, chronic resp disease/ which might place the employee at incr risk from sec-butyl alcohol exposure. ... Any employee developing these ... conditions should be referred for further medical exam.
Soil Adsorption/MobilityThe Koc of sec-butyl alcohol is estimated as 50(SRC), using a log Kow of 0.61(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that sec-butyl alcohol is expected to have high mobility in soil(SRC).
TSCA-AnforderungenSection 8(a) of TSCA requires manufacturers of this chemical substance to report preliminary assessment information concerned with production, use, and exposure to EPA as cited in the preamble in 51 FR 41329.Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. s-Butyl alcohol is included on this list.
LuftstandardsThis action promulgates standards of performance for equipment leaks of Volatile Organic Compounds (VOC) in the Synthetic Organic Chemical Manufacturing Industry (SOCMI). The intended effect of these standards is to require all newly constructed, modified, and reconstructed SOCMI process units to use the best demonstrated system of continuous emission reduction for equipment leaks of VOC, considering costs, non air quality health and environmental impact and energy requirements. s-Butyl alcohol is produced, as an intermediate or a final product, by process units covered under this subpart.
Berufliche Expositionsstufe (OEB)A
Arbeitsplatzgrenzwert (OEL)TWA: 100.0 ppm305.0 mg/m3, STEL: 150.0 ppm455.0 mg/m3
Wassergefährdungsklasse (WGK)1
UN-TransportnummerUN 1120 3/PG 3
Zollcode29051420
RTECS-Nr.EO1750000
R-Sätze (R)10-36/37-67
Toxizitätdog,LDLo,oral,2400mg/kg (2400mg/kg),National Technical Information Service. Vol. OTS0572377,
GefahrensymboleXi
Sicherheitshinweise (S)13-24/25-26-46-7/9