Zurück
HuagongsheHuagongshe Chemie-Druckbericht · Nur für Forschungszwecke
HCID 6595Erstellt: 26. Oktober 2026

Methacrylsäureamid

Methylacrylamide · 2-Methylacrylamide · Methacrylic acid amide · 2-methyl-2-Propenamide · usafrh-1 · USAF rh-1 · mhoromerbm801 · Methacryamide

https://huagongshe.com/de/chemical/6595

Molekülstruktur von Methacrylsäureamid

Identifikatoren & physikalische Daten

CAS No.79-39-0
SummenformelC4H7NO
Durchschnittliche Molmasse85,1 g/mol
Monoisotopische Masse85,05276384 g/mol
SMILESC=C(C)C(N)=O
InChIKeyFQPSGWSUVKBHSU-UHFFFAOYSA-N
PubChem CID6595
ChEMBLCHEMBL158237
ChEBICHEBI:51759
EC No.201-202-3
DTXSIDDTXSID8029600
Lokaler NameMethacrylsäureamid

Chemische & physikalische Eigenschaften

XLogP0,1
Polarare Oberfläche (TPSA)43,1
H-Brücken-Donoren1
H-Brücken-Akzeptoren1
Frei drehbare Bindungen1
Schwere Atome6
Formalladung0
Komplexität85,5
StoffklassenIndustrial compound
PolymersPlastics & Rubber -> Other Monomers
SpringerMaterials PropertiesBoiling point
Siedepunkt215 °C @760 [mm Hg]
Dampfdruck0.1 [mmHg]0.0015 hPa (20 °C)
Food Contact SubstancesFCS -> FDA Inventory of Food Contact Substances Listed in 21 CFR
Physical DescriptionWhite crystalline solid[Alfa Aesar MSDS]
Schmelzpunkt106-110 °C (lit.)
Dichte1,115 g/cm3
Brechungsindex1.3992 (estimate)
Flammpunkt215°C
LagerbedingungenStore below +30°C.
Löslichkeit202g/l202 g/L (20 ºC)
AggregatzustandCrystals
pKa (Säurekonstante)15.46±0.50(Predicted)
FarbeWhite to very slightly yellow
pH7.1 (100g/l, H2O, 20℃)
Explosionsgrenze2-15%(V)
BRN605397
Henry-Konstante8.8×103 mol/(m3Pa) at 25℃, Ebert et al. (2023)
InChI1S/C4H7NO/c1-3(2)4(5)6/h1H2,2H3,(H2,5,6)
InChIKeyFQPSGWSUVKBHSU-UHFFFAOYSA-N
SMILESCC(=C)C(N)=O
CAS Datenbank79-39-0(CAS DataBase Reference)
NIST chemische InformationenMethacrylamide(79-39-0)
EPA chemische InformationenMethacrylamide (79-39-0)

Sicherheit & Vorschriften

GHS-EinstufungThis chemical does not meet GHS hazard criteria for 0.9% (7 of 803) of reports.WarningH302 (99.1%): Harmful if swallowed [Warning Acute toxicity, oral]P260, P261, P264, P264+P265, P270, P271, P280, P301+P317, P304+P340, P305+P351+P338, P308+P316, P319, P330, P337+P317, P403+P233, P405, and P501 (click each P-code to see the statement)Aggregated GHS information provided per 803 reports by companies from 23 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Regulatorische InformationenChemical: 2-Propenamide, 2-methyl-Status: Active Update: 14-04-2023 https://echa.europa.eu/registration-dossier/-/registered-dossier/15801Methacrylamide: Does not have an individual approval but may be used under an appropriate group standard
Weitere SicherheitsinformationenEvaluation - 2-Propenamide, 2-methyl- (methacrylamide)
GefahrenübersichtAn eye irritant in rabbitsNo to mild skin sensitization reactions seen in guinea pigsNeurotoxicity observed in repeated-dose animal studies[IUCLID] Marked developmental toxicity observed in mice at doses only slightly maternally toxic[NTP] An irritantModerately toxic by ingestion and inhalation (degenerative changes of the liver, kidney, and brain)Reproductive effects observed in experimental animals[Alfa Aesar MSDS] See Acrylamide.
Hazard Classes and CategoriesAcute Tox. 4 (99.1%)Acute toxicity (Oral) - Category 4
Protective Action Criteria (PAC)3.0 [mg/m3]15 [mg/m3]91 [mg/m3]
Unerwünschte WirkungenNeurotoxin - Other CNS neurotoxin
Wassergefährdungsklasse (WGK)1
TSCA-Inventar-StatusTSCA listed
UN-Transportnummer3263
Zollcode2924 19 00
RTECS-Nr.UC6475000
R-Sätze (R)22-36/37/38
ToxizitätLD50 orally in Rabbit: 1815 mg/kg LD50 dermal Rat > 5000 mg/kg
GefahrensymboleXn
Sicherheitshinweise (S)26-36/37
Gefahrenklasse6.1(b)Acute Tox. 4 OralEye Irrit. 2STOT RE 2STOT SE 2STOT SE 3
VerpackungsgruppeIII
Lagerklasse11 - Combustible Solids
Selbstentzündungstemperatur510 °C

Anwendungen & Verwendung

Verwenden

Methacrylamide is a reagent used in the production of polymers and copolymers. It is also used as a raw material in the production of chemicals for industrial and professional use such as textiles, leather, fur, bulk, large scale chemicals (including petroleum products), fine chemicals, formulation [mixing] of preparations and/or re-packaging (excluding alloys), building and construction work, electricity, steam, gas, water supply and sewage treatment.