StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
Huagongshe Open Project:[email protected]KI-Anbindung: llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.7.8
Zurück
HuagongsheHuagongshe Chemie-Druckbericht · Nur für Forschungszwecke
HCID 70002Erstellt: 3. November 2026

Trichlor(p-chlorphenyl)silan

P-CHLOROPHENYLTRICHLOROSILANE · 4-chlorophenyltrichlorosilane · trichloro(chlorophenyl)silane · trichloro(p-chlorophenyl)silane · TRICHLORO(4-CHLOROPHENYL)SILANE · Silane, trichloro(4-chlorophenyl)- · TRICHLORO(4-CHLOROPHENHYL)SILANE, 97% · Benzene, 1-chloro-4-(trichlorosilyl)-

https://huagongshe.com/de/chemical/70002

Molekülstruktur von Trichlor(p-chlorphenyl)silan

Identifikatoren & physikalische Daten

CAS No.26571-79-9
SummenformelC6H4Cl4Si
Durchschnittliche Molmasse246 g/mol
Monoisotopische Masse243,88363738 g/mol
SMILESClc1ccc([Si](Cl)(Cl)Cl)cc1
InChIKeyABADVTXFGWCNBV-UHFFFAOYSA-N
PubChem CID70002
EC No.212-551-6
DTXSIDDTXSID8061183
Lokaler NameTrichlor(p-chlorphenyl)silan

Chemische & physikalische Eigenschaften

Polarare Oberfläche (TPSA)0
H-Brücken-Donoren0
H-Brücken-Akzeptoren0
Frei drehbare Bindungen0
Schwere Atome11
Formalladung0
Komplexität125
StoffklassenCorrosives
SpringerMaterials Properties13C nuclear magnetic resonance spectrum
Physical DescriptionChlorophenyltrichlorosilane is a colorless to pale yellow liquid with a pungent odor. The material will burn though it may take some effort to ignite. It is decomposed by moisture or water to hydrochloric acid with evolution of heat. It is corrosive to metals and tissue.
Schmelzpunkt<0°C
Siedepunkt105 °C15 mm Hg(lit.)
Dichte1.424 g/mL at 25 °C(lit.)
Brechungsindexn20/D 1.544(lit.)
Flammpunkt>230 °F
Wichte1.432
EPA chemische InformationenSilane, trichloro(4-chlorophenyl)- (825-94-5)

Sicherheit & Vorschriften

GHS-EinstufungDangerH314 (100%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]P260, P264, P280, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P316, P321, P363, P405, and P501 (click each P-code to see the statement)Aggregated GHS information provided per 39 reports by companies from 1 notifications to the ECHA C&L Inventory.
Hazards IdentificationWater-reactive material (WR)
Regulatorische InformationenThe New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)
DOT-KennzeichnungCorrosive
BrandgefahrenExcerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:· Combustible material: may burn but does not ignite readily.
GesundheitsgefahrenExcerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:· TOXIC and/or CORROSIVEinhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death.
DOT-Nummer und Handbuch1753 156
Reaktive GruppeChlorosilanes
Reactivity AlertsWater-Reactive
Reactivity ProfileChlorosilanes, such as CHLOROPHENYLTRICHLOROSILANE, are compounds in which silicon is bonded to from one to four chlorine atoms with other bonds to hydrogen and/or alkyl groups. Chlorosilanes react with water, moist air, or steam to produce heat and toxic, corrosive fumes of hydrogen chloride. They may also produce flammable gaseous H2. They can serve as chlorination agents. Chlorosilanes react vigorously with both organic and inorganic acids and with bases to generate toxic or flammable gases.
DOT Hazard ClassificationChlorophenyltrichlorosilaneMarine pollutant
UN1753
Class 8 Corrosive material (49 eCFR § 173.136)
PG II: the degree of danger presented by the material is medium
Air and Water ReactionsBased on a scenario where the chemical is spilled into an excess of water (at least 5 fold excess of water), half of the maximum theoretical yield of Hydrogen Chloride gas will be created in 1.9 minutes. Experimental details are in the following: "Development of the Table of Initial Isolation and Protective Distances for the 2008 Emergency Response Guidebook", ANL/DIS-09-2, D.F. Brown, H.M. Hartmann, W.A. Freeman, and W.D. Haney, Argonne National Laboratory, Argonne, Illinois, June 2009.
Hazard Classes and CategoriesSkin Corr. 1B (100%)Corrosives, Reactive agents - 1st degree
BrandbekämpfungExcerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:
Freisetungsmaßnahmen· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.
Erste HilfeExcerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:General First Aid:
Expositionsschutz und Persönliche Schutzausrüstung· Wear positive pressure self-contained breathing apparatus (SCBA).
Freisetung ohne BrandExcerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:
Isolation and EvacuationExcerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:Immediate precautionary measureWhen spilled in water
Toxic-by-Inhalation (TIH) GasHCl - when spill Chlorophenyltrichlorosilane into water.
Personal Protective Equipment (PPE)Excerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:
Emergency Response Planning Guidelines· Note: Most foams will react with the material and release corrosive/toxic gases.
Wassergefährdungsklasse (WGK)3
TSCA-Inventar-StatusTSCA listed
UN-TransportnummerUN 1753
R-Sätze (R)34
GefahrensymboleC
Sicherheitshinweise (S)26-36/37/39-45
Gefahrenklasse8
VerpackungsgruppeII