| GHS-Einstufung | DangerH302: Harmful if swallowed [Warning Acute toxicity, oral]P260, P261, P264, P270, P271, P272, P280, P301+P317, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P321, P330, P333+P317, P362+P364, P363, P405, and P501 (click each P-code to see the statement)H302 (97.1%): Harmful if swallowed [Warning Acute toxicity, oral]P260, P261, P262, P264, P264+P265, P270, P271, P272, P280, P284, P301+P317, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P320, P321, P330, P333+P317, P361+P364, P362+P364, P363, P403+P233, P405, and P501 (click each P-code to see the statement) |
|---|
| Regulatorische Informationen | Chemical: Benzoyl chlorideHazard Traits - CarcinogenicityBenzoyl chloride is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Benzoyl chloride are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)Status: Active Update: 24-04-2022 https://echa.europa.eu/registration-dossier/-/registered-dossier/13134Benzoyl chloride: Does not have an individual approval but may be used under an appropriate group standardThe New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.) |
|---|
| Weitere Sicherheitsinformationen | IMAP assessments - Benzoyl chloride: Human health tier II assessment |
|---|
| DOT-Kennzeichnung | Corrosive |
|---|
| Brandgefahren | Special Hazards of Combustion Products: Highly poisonous phosgene gas may be formed in fires.· EXCEPT FOR ACETIC ANHYDRIDE (UN1715), THAT IS FLAMMABLE, some of these materials may burn, but none ignite readily.Combustible. Many reactions may cause fire or explosion. Gives off irritating or toxic fumes (or gases) in a fire. Above 72 °C explosive vapour/air mixtures may be formed. |
|---|
| Brandpotenzial | Flamable when exposed to heat or flame.At fire temperatures the compound may react violently with water or steam. |
|---|
| Gesundheitsgefahren | INHALATION: may irritate eyes, nose and throat. INGESTION: causes acute discomfort. SKIN: causes irritation and burning. (USCG, 1999)· CORROSIVE and/or TOXICinhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. |
|---|
| Gefahrenübersicht | Corrosive to skin[Quick CPC] A lachrymatorHigh inhalation exposure can cause pulmonary edema[HSDB] A corrosive substance that can cause pulmonary edema[ICSC] In lethal concentration studies, rats had labored breathing and histological evidence of emphysemaHydrolyzes to produce corrosive HCl in biological systems, and this is the mechanism of toxicityDanger of dermal sensitization[AIHA] Slowly reacts with water forming hydrochloric acid (reacts more rapidly with steam)Short-term exposure causes second- and third-degree skin burns and severe eye injuryVapors cause severe eye and throat irritation (and possibly eye and lung injury) and are intolerable even at low concentrations[CHRIS] Human inhalation of 2 ppm for 1 minute causes other changes in olfaction and lungs, thorax, or respiration[RTECS] Causes burnsInhalation may cause corrosive injuries to upper respiratory tract and lungsMay cause skin sensitizationHarmful by ingestion, inhalation, and skin absorption[Alfa Aesar MSDS] |
|---|
| DOT-Nummer und Handbuch | 1736 137 |
|---|
| Reaktive Gruppe | Acyl Halides, Sulfonyl Halides, and Chloroformates |
|---|
| EG-Einstufung | Symbol: CR: 34S: (1/2)-26-45 |
|---|
| UN-Einstufung | UN Hazard Class: 8UN Pack Group: II |
|---|
| Special Reports | TSCA Chemical Hazard Information Profile present a preliminary assessment of benzoyl chloride's potential for injury to human health & the environment (available at EPA's TSCA Assistance Office: (202) 554-1404). |
|---|
| Brandbekämpfung | Excerpt from ERG Guide 137 [Substances - Water-Reactive - Corrosive]:Use alcohol-resistant foam, powder, carbon dioxide. NO water. In case of fire: keep drums, etc., cool by spraying with water. NO direct contact with water. |
|---|
| Erste-Hilfe-Maßnahmen | Fresh air, rest. Half-upright position. Artificial respiration may be needed. Refer for medical attention.Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention . Wear protective gloves when administering first aid.First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.Rinse mouth. Rest. Do NOT induce vomiting. Refer for medical attention . |
|---|
| Freisetungsmaßnahmen | · CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.· Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. |
|---|
| Erste Hilfe | EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.General First Aid: |
|---|
| Sichere Lagerung | See Chemical Dangers. Separated from food and feedstuffs and incompatible materials. Dry. Well closed. |
|---|
| Expositionsschutz und Persönliche Schutzausrüstung | · Wear positive pressure self-contained breathing apparatus (SCBA). |
|---|
| Brandbekämpfungsverfahren | Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.Advice for firefighters: Wear self-contained breathing apparatus for firefighting if necessary.Water hydrolyzes material liberating acidic gas which in contact with metal surfaces can generate flammable and/or explosive hydrogen gas. Use water spray to cool unopened containers.If material on fire or involved in fire: Use dry chemical or carbon dioxide. Do not use water on material itself. If large quantities of combustibles are involved, use water in flooding quantities as spray and fog. Use water spray to knock-down vapors. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible.For more Fire Fighting Procedures (Complete) data for Benzoyl chloride (6 total), please visit the HSDB record page. |
|---|
| Lagerbedingungen | Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store under inert gas. Moisture sensitive. Storage class (TRGS 510): Combustible, corrosive hazardous materials.Store in a cool, dry, well-ventilated location. Separate from alkalies, oxidizing materials, alcohol, and water. |
|---|
| Reinigungsverfahren | Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapors accumulating to form explosive concentrations. Vapors can accumulate in low areas. Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Methods and materials for containment and cleaning up: Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations. Keep in suitable, closed containers for disposal.Environmental considerations: Land spill: Dig a pit, pond, lagoon, or holding area to contain liquid or solid material. /SRP: If time permits, pits, ponds, lagoons, soak holes, or holding areas should be sealed with an impermeable flexible membrane liner./ Dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete. Absorb bulk liquid with fly ash or cement powder. Neutralize with agricultural lime (CaO), crushed limestone (CaCO3) or sodium bicarbonate (NaHCO3).Environmental considerations: Water spill: Neutralize with agricultural lime (CaO), crushed limestone (CaCO3) or sodium bicarbonate (NaHCO3). If dissolved, in region of 10 ppm or greater concentration, apply activated carbon at ten times the spilled amount. Use mechanical dredges or lifts to remove immobilized masses of pollutants and precipitates.Environmental considerations: Air spill: Apply water spray or mist to knock down vapors.For more Cleanup Methods (Complete) data for Benzoyl chloride (6 total), please visit the HSDB record page. |
|---|
| Freisetung ohne Brand | Excerpt from ERG Guide 137 [Substances - Water-Reactive - Corrosive]: |
|---|
| Entsorgungsverfahren | SRP: Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air qualitypotential migration in air, soil or watereffects on animal, aquatic and plant lifeand conformance with environmental and public health regulations. If it is possible or reasonable use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination.Product: This combustible material may be burned in a chemical incinerator equipped with an afterburner and scrubber. Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Contaminated packaging: Dispose of as unused product. |
|---|
| Verschüttetes entsorgen | Personal protection: chemical protection suit including self-contained breathing apparatus. Collect leaking liquid in sealable containers. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. Do NOT wash away into sewer. |
|---|
| Ökotoxizitätswerte | LC50Species: Palaemonetes pugio (grass shrimp)Conditions: static, synthetic salt water of the following quality was used: 25 +/- 1 g/L salinity, 30,000-40,000 microsiemens/cm conductivity, pH 8.3-8.7, temperature= 22 +/- 1 °CConcentration: 180 mg/L for 96 hr (95% confidence interval: 139.0-233.0 mg/L)Species: Pimephales promelas (fathead minnow) length 3.2-4.2 cmConditions: freshwater, static, 22 °C, pH 7.2-7.9, hardness 40-48 mg/L CaCO3, alkalinity 30-35 mg/L CaCO3Concentration: 42600 ug/L for 24 hr (95% confidence interval: 35400-57400 ug/L)Concentration: 34700 ug/L for 48 hr (95% confidence interval: 28500-45300 ug/L)Concentration: 34700 ug/L for 96 hr (95% confidence interval: 28500-45300 ug/L) |
|---|
| Umweltverhalten | TERRESTRIAL FATE: Data concerning the hydrolysis of benzoyl chloride in soil are not available. However, the rate constant for the hydrolysis of benzoyl chloride in water is 4.2X10-2 sec-1 at 25 °C, corresponding to a hydrolysis half-life of 16 sec(1). The hydrolysis half-life is so short that the predominant terrestrial fate of benzoyl chloride is expected to be hydrolysis(SRC). In the absence of water, however, benzoyl chloride could form a variety of esters upon reaction with common soil constituents(SRC). Benzoyl chloride is not expected to adsorb to soils, biodegrade, photolyze, volatilize, or leach(SRC).AQUATIC FATE: The hydrolysis rate constant for benzoyl chloride in water is 4.2X10-2 sec-1 at 25 °C, which corresponds to a half-life of 16 seconds(1). The products of the hydrolysis reaction are benzoic acid and hydrochloric acid(2). The rapid rate of hydrolysis suggests that hydrolysis is the major aquatic fate process for benzoyl chloride. Volatilization, photolysis, photooxidation, bioconcentration, biodegradation, and adsorption to sediments are not expected to be important processes in water(SRC).ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), benzoyl chloride, which has a vapor pressure of 0.700 mm Hg at 25 deg(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase benzoyl chloride is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC)the half-life for this reaction in air is estimated to be 9 days(SRC), calculated from its rate constant of 1.8X10-12 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Benzoyl chloride exhibits an absorption maximum of 282.9 nm (Epsilon = 1752) and also absorption at 293.0 nm (Epsilon = 1108) in methyl cyclohexane(4). Benzoyl chloride in the vapor phase absorbs light from 225-292 nm, but only qualitative estimates of the absorption intensities (weak-strong) were given(4). This suggests that benzoyl chloride may be susceptible to direct photolysis by sunlight(SRC).(SRC). |
|---|
| Unerwünschte Wirkungen | Dermatotoxin - Skin burns. |
|---|
| Expositionspfade | The substance can be absorbed into the body by inhalation and by ingestion. |
|---|
| Toxizitätsübersicht | IDENTIFICATION AND USE: Benzoyl chloride is a transparent, colorless liquid, or slightly brown liquid with a penetrating odor. It is used for for acylation (introduction of benzoyl group into alcohols, phenols, and amines). It is also used in the manufacture of benzoyl peroxide and of dye intermediates, and in organic analysis for making benzoyl derivates for identification purposes. HUMAN STUDIES: Benzoyl chloride has a corrosive effects on the skin, eyes, and mucous membranes by inhalation. It can cause cough, labored breathing, nausea, and sore throat after inhalation. Redness and irritant pain on contact with the eye and skin. Burning sensation, nausea and vomiting upon ingestion. Three cases of lung cancer have been reported among workers engaged in production of benzoyl chloride. ANIMAL STUDIES: Benzoyl chloride was found to be corrosive to rabbit eyes. In male rats exposed to benzoyl chloride by inhalation signs of intoxication included inactivity, piloerection, unkempt fur, and difficulties in breathing up to 19 days post exposure in all rats. Rats that died during the test showed dark red colored lungs always with emphysema, some rats showed lung edema. Rats that survived showed no pathologic findings up to 0.708 mg/L. At higher concentrations lungs showed emphysema and were mottled, some showed enlarged adrenals. Benzoyl chloride was found to induce tumors in mice following inhalation exposure. Benzoyl chloride was positive in the bacterial gene mutation assay, preincubation method in Escherichia coli WP2uvrA/pKM101 with and without activation at concentrations up to 1000 ug/plate. Benzoyl chloride was not mutagenic in Salmonella typhimurium strains His g46, His c3076, His d3052, TA1535, TA1536, TA1537, TA98 or TA100, nor in Escherichia coli strains Wp2 and Wp2 uvra- with or without metabolic activation. Benzoyl chloride was weakly mutagenic to Salmonella strain TA98 in the absence of metabolic activation. ECOTOXICITY STUDIES: In a 96 hr lethality study with the Zebrafish (Brachydanio rerio) no toxicity was found at 7.5 mg/L and all the fish died at 10 mg/L. Benzoyl chloride reacted with water to give benzoic acid and hydrogen chloride, causing a decrease in pH to 5.2 in freshwater and 7.2 in salt water. However, the biological oxygen demand of the benzoic acid was a far more serious effect. In the saltwater test of grass shrimp this was believed to be the major cause of mortality since dissolved oxygen levels plunged below 1 mg/L in direct correspondence to initial benzoyl chloride concentration. |
|---|
| Ökotoxizitätsauszüge | /AQUATIC SPECIES/ The minnows /(Pimephales promelas)/ were raised from controlled breeding stocks at the EPA Newton Fish Toxicology Station, Cincinnati, OH and were observed for a minimum of 14 days prior to testing. The fish were acclimated for 2 days in 100% test dlution water at 22 °C. Bioassay containers were filled with 12 liters of dilution water. Test substance was added in the form of a stock solution in deionized water. Five fish were placed in each of two duplicate aquaria (10 fish/concentration). At 24 hr intervals, fish were observed for survival, and water tested for dissolved oxygen and temperature. At the end of the 96 hr exposure period, pH and test substance concentration was measured by electron capture gas chromatography (benzene: 15% ether extraction). With concentration versus mortality results, 96 hr LC50 and 95% confidence limits were calculated by Probit, Moving average, or Binomial test (depending on the number of partial kills observed). Benzoyl chloride reacted with water to give benzoic acid and HCl, causing a decrease in pH to 5.2 in freshwater and 7.2 in salt water. However, the biological oxygen demand of the benzoic acid was a far more serious effect. ... /The LC50 was calculated at 34.1 mg/L/ 95% confidence interval = 28.5-45.3 mg/L. Reconstituted soft water of the following quality was used: 40-48 mg/L hardness as CaC0330-35 mg/L alkalinity as CaC03120-160 uS/cm conductivitypH 7.2 - 7.9temperature = 22 +/- 1 °C./AQUATIC SPECIES/ In a 96 hr lethality study with the Zebrafish (Brachydanio rerio) no toxicity was found at 7.5 mg/L (LC0) and all the fish died at 10 mg/L. The geometric mean of the two values is 8.7 mg/L. Test conditions: ventillated test medium , static system, 10 animals/vessel. The test substance was weighed directly into the dillution water./AQUATIC SPECIES/ The grass shrimp /(Palaeomonetes pugio)/ were collected from wild poulations in an estuary near Galveston Bay, Texas and were observed for a minimum of 10 days prior to testing. Bioassay containers were filled with 12 liters of dilution water. Test substance was added in the form of a stock solution in deionized water. Five grass shrimp were placed in each of two duplicate aquaria (10 fish/concentration). At 24 hr intervals, grass shrimp were observed for survival, and water tested for dissolved oxygen and temperature. At the end of the 96 hr exposure period, pH and test substance concentration was measured by electron capture gas chromatography (benzene:15% ether extraction). With concentration versus mortality results, 96 hr LC50 and 95% confidence limits were calculated by Probit, Moving average, or Binomial test (depending on the number of partial kills observed). Benzoyl chloride reacted with water to give benzoic acid and HCl, causing a decrease in pH to 5.2 in freshwater and 7.2 in salt water. However, the biological oxygen demand of the benzoic acid was a far more serious effect. In the saltwater test of grass shrimp this was believed to be the major cause of mortality since dissolved oxygen levels plunged below 1 mg/L in direct correspondence to initial benzoyl chloride concentration. |
|---|
| Signs and Symptoms | Burning sensation. Cough. Shortness of breath. Sore throat. Laboured breathing. Symptoms may be delayed.Redness. Skin burns. Burning sensation. Pain. Blisters.Redness. Pain. Severe deep burns.Burning sensation. Abdominal pain. Shock or collapse. Further see Inhalation. |
|---|
| Ongoing Test Status | EPA has released the Interactive Chemical Safety for Sustainability (iCSS) Dashboard. The iCSS Dashboard provides an interactive tool to explore rapid, automated (or in vitro high-throughput) chemical screening data generated by the Toxicity Forecaster (ToxCast) project and the federal Toxicity Testing in the 21st century (Tox21) collaboration. /The title compound was tested by ToxCast and/or Tox21 assays/[USEPAICSS Dashboard ApplicationAvailable from, as of November 16, 2017: http://actor.epa.gov/dashboard/] |
|---|
| ICSC Environmental Data | The substance is harmful to aquatic organisms. |
|---|
| Soil Adsorption/Mobility | Benzoyl chloride is expected to hydrolyze on contact with moisture based on a hydrolysis rate constant of 4.2X10-2 sec-1 at 25 °C in water which corresponds to a half-life of 16 seconds(1). Therefore, due to the rapid rate of hydrolysis, absorption is not expected to be an important environmental fate process in moist soil(SRC). |
|---|
| TSCA Test Submissions | Benzoyl chloride was examined for mutagenic activity in Saccharomyces cerevisiae strain D4, and in Salmonella typhimurium tester strains TA1535, TA1537, TA1538, TA98, and TA100 both with and without the addition of Aroclor induced rat liver S9 metabolic activation. The test article was not mutagenic when administered at concentrations ranging from 0.0001 to 1 ul/plate in the presence or absence of activation. Toxicity was observed in all strains at doses of 1.0 ul/plate.The absorption and excretion of (14)C-benzoyl chloride (BC) was studied in groups of male and female Holtzman albino rats (1-3/group) exposed by gavage to single doses of BC. Five groups of females were exposed to average concentrations ranging from 11.8-12.6 mg/kg and sacrificed 8 (1 group), 24 (3 groups) or 48 hr (1 group) after dosing, respectively. One group of males were exposed to an average concentration of 8.8 mg/kg and sacrificed 48 hr after dosing. BC was rapidly absorbed in the gastrointestinal tract and efficiently eliminated in the urine (90%) and feces (2%) in 48 hr. Radioactivity in the blood (as BC equivalents) peaked at 4 ppm by 4 hr after dosing and then rapidly decreased to 0.02 ppm by 24 hr. The elimination half-life of (14)C in the blood was 1.5 hr. Total radiocarbon residue in tissues was approximately 1.5% of the dose after 72 hr with fat, liver, and kidneys containing the highest residue levels. The pharmacokinetics of BC appeared to follow a one-compartment open model system. BC was rapidly distributed in the body and the rate of elimination in the urine is proportional to the concentration of BC in the blood. At 8 hr, about 0.8% of the administered (14)C was present in the tissues. The radiocarbon elimination half-lives in the tissues ranged from 2.9-16.0 hr (brain, 16.0 hr, ovary, 10.1 hr). |
|---|
| Human Toxicity Excerpts | /SIGNS AND SYMPTOMS/ Corrosive effects on the skin, eyes, and mucous membranes by inhalation./SIGNS AND SYMPTOMS/... Workers /engaged in production of benzoyl chloride/ suffered from chronic pharyngitis, chronic sinusitis, hyposmia or anosmia, and skin troubles classed as parachroma and warts. Because ... /benzyl chloride/ goes through several intermediates before ... final product, exactly what substance(s) contributes ... has yet to be determined./SIGNS AND SYMPTOMS/ Cough, labored breathing, nausea, and sore throat after inhalation. Redness and irritant pain on contact with the eye and skin. Burning sensation, nausea and vomiting upon ingestion. /from table//CASE REPORTS/ 3 cases of cancer of lung have been reported among ... workers engaged in production of benzoyl chloride. ... Case of malignant, maxillary lymphoma occurred at another plant ... because ... it goes through several intermediates before its final product, exactly what substance(s) contributes ... has yet to be determined.For more Human Toxicity Excerpts (Complete) data for Benzoyl chloride (6 total), please visit the HSDB record page. |
|---|
| Luftstandards | This action promulgates standards of performance for equipment leaks of Volatile Organic Compounds (VOC) in the Synthetic Organic Chemical Manufacturing Industry (SOCMI). The intended effect of these standards is to require all newly constructed, modified, and reconstructed SOCMI process units to use the best demonstrated system of continuous emission reduction for equipment leaks of VOC, considering costs, non air quality health and environmental impact and energy requirements. Benzoyl chloride is produced, as an intermediate or a final product, by process units covered under this subpart. |
|---|
| CERCLA-Meldepflichtmengen | Persons in charge of vessels or facilities are required to notify the National Response Center (NRC) immediately, when there is a release of this designated hazardous substance, in an amount equal to or greater than its reportable quantity of 1000 lb or 454 kg. The toll free number of the NRC is (800) 424-8802. The rule for determining when notification is required is stated in 40 CFR 302.4 (section IV. D.3.b). |
|---|
| Clean Water Act Anforderungen | Benzoyl chloride is designated as a hazardous substance under section 311(b)(2)(A) of the Federal Water Pollution Control Act and further regulated by the Clean Water Act Amendments of 1977 and 1978. These regulations apply to discharges of this substance. This designation includes any isomers and hydrates, as well as any solutions and mixtures containing this substance. |
|---|
| Wassergefährdungsklasse (WGK) | 1 |
|---|
| TSCA-Inventar-Status | TSCA listed |
|---|
| UN-Transportnummer | UN 1736 |
|---|
| Zollcode | 29310095 |
|---|
| RTECS-Nr. | DM6600000 |
|---|
| R-Sätze (R) | 34-43-20/21/22 |
|---|
| Toxizität | LD50 orally in Rabbit: 2460 mg/kg LD50 dermal Rabbit 790 mg/kg |
|---|
| Gefahrensymbole | C |
|---|
| hazard_note | Corrosive |
|---|
| Sicherheitshinweise (S) | 26-45-36/37/39 |
|---|
| Gefahrenklasse | 8Acute Tox. 3 InhalationAcute Tox. 4 DermalAcute Tox. 4 OralEye Dam. 1Skin Corr. 1BSkin Sens. 1 |
|---|
| Verpackungsgruppe | II |
|---|
| Lagerklasse | 6.1C - Combustible acute toxic Cat.3toxic compounds or compounds which causing chronic effects |
|---|
| Gefahrstoffdaten | 98-88-4(Hazardous Substances Data) |
|---|
| Selbstentzündungstemperatur | 600 °C |
|---|
