4-Methoxy-o-toluidin

2-Methyl-4-methoxyaniline

HCID 7610CAS 102-50-1

Grundinformationen

Standard-SMILES
COc1ccc(N)c(C)c1
InChIKey
CDGNLUSBENXDGG-UHFFFAOYSA-N
Summenformel
C8H11NO
Durchschnittliche Molmasse
137,18 g/mol
Monoisotopische Masse
137,08406397

Namen und Bezeichner

Bevorzugter Name
2-Methyl-4-methoxyaniline
IUPAC
4-methoxy-2-methylaniline
Lokaler Name
4-Methoxy-o-toluidin
Englischer Name
2-Methyl-4-methoxybenzenamine
Summenformel
C8H11NO
Molmasse
137.18

Namen und Synonyme

2-Methyl-4-methoxyaniline2-cresidineRefChem:8003574-Methoxy-2-methylaniline102-50-1m-CresidineBenzenamine, 4-methoxy-2-methyl-2-Methyl-p-anisidine4-Methoxy-o-toluidine2-methyl-4-methoxybenzenaminemeta-Cresidine4-Amino-3-methylanisole
Weitere Namen anzeigen
2-Methoxy-3-methylanilineAKOS 91136N-cresidine2-methyl-p-anisidin
p-Anisidine, 2-methyl-6-AMINO-3-METHOXYTOLUENE4-METHOXY-2-METHYLBENZENAMINE4-methoxy-2-methyl-aniline1-Amino-4-methoxy-2-methylbenzeneMFCD000077354-METHOXY-2-METHYL-PHENYLAMINENCI-C02993

Datenbank-Bezeichner

CAS
102-50-1
PubChem CID
7610
DTXSID
DTXSID2020349
ChEMBL
CHEMBL1361784
ChEBI
CHEBI:82430
UNII
F0E8Y56GUK
EC Number
203-036-7
Nikkaji
J33.857E

Eigenschaften

Berechnete Struktureigenschaften

XLogP
1,2
Polarare Oberfläche (TPSA)
35,3 Ų
H-Brücken-Donoren
1
H-Brücken-Akzeptoren
2
Frei drehbare Bindungen
1
Schwere Atome
10

Experimentelle und physikochemische Eigenschaften

LogPlog Kow = 1.23
Density · 2 Einträge

1.065 (NTP, 1992) - Denser than water; will sink

1.065 @ 25 °C

Color/FormCrystals from ligroin
Solubility · 2 Einträge

less than 1 mg/mL at 70.7 °F (NTP, 1992)

Very soluble in ethanol

Flash Point · 2 Einträge

greater than 230 °F (NTP, 1992)

Flash Point > 230 °F

Boiling Point · 2 Einträge

478 to 480 °F at 760 mmHg (NTP, 1992)

248.5 °C

Physikochemische Eigenschaften

Schmelzpunkt
13 · 13-14 °C(lit.)
Siedepunkt
248 · 248-249 °C(lit.)
Dichte
1.065 g/mL · 1.065 g/mL at 25 °C(lit.)
Brechungsindex
20 · n20/D 1.565(lit.)
Flammpunkt
230 °F · >230 °F
storage temp.
Keep in dark place,Sealed in dry,Room Temperature

Sicherheit und Regulatorisches

GHS-Klassifizierung

GHS Classification · 5 Einträge

Warning

H315 (89.6%): Causes skin irritation [Warning Skin corrosion/irritation];H319 (89.6%): Causes serious eye irritation [Warning Serious eye damage/eye irritation];H335 (87.5%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation];H351 (10.4%): Suspected of causing cancer [Warning Carcinogenicity]

P203, P261, P264, P264+P265, P271, P280, P302+P352, P304+P340, P305+P351+P338, P318, P319, P321, P332+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 48 reports by companies from 8 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.;Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website.

Gefahrenhinweise

DOT LabelPoison
Fire HazardsThis chemical is probably combustible. (NTP, 1992)
Health HazardsACUTE/CHRONIC HAZARDS: This compound is a local irritant. When heated to decomposition it emits toxic fumes of NOx. This compound is an experimental animal carcinogen. (NTP, 1992)
Hazards SummaryAn irritant; [CAMEO] An irritant; Can be absorbed through skin; Associated with tumors of urinary tract and liver in high-dose animal studies; [MSDSonline] See p-Cresidine.
Reactive GroupAmines, Aromatic
Reactivity Profile · 1 Eintrag

M-CRESIDINE neutralizes acids in weakly exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. May generate hydrogen, a flammable gas, in combination with strong reducing agents such as hydrides. Reacts with oxidizing agents (NTP, 1992).

Sicherheit und Schutzausrüstung

Fire FightingFires involving this compound should be controlled with a dry chemical carbon dioxide or Halon extinguisher. (NTP, 1992)
First Aid · 1 Eintrag

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.;SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.;INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.;INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital.;OTHER: Since this chemical is a known or suspected carcinogen you should contact a physician for advice regarding the possible long term health effects and potential recommendation for medical monitoring. Recommendations from the physician will depend upon the specific compound, its chemical, physical and toxicity properties, the exposure level, length of exposure, and the route of exposure. (NTP, 1992)

Storage ConditionsYou should protect this chemical from exposure to light. Keep the container tightly closed under an inert atmosphere, and store under refrigerated temperatures.
Nonfire Spill Response · 1 Eintrag

SMALL SPILLS AND LEAKAGE: If you spill this chemical, FIRST REMOVE ALL SOURCES OF IGNITION. Then, use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.;STORAGE PRECAUTIONS: You should protect this chemical from exposure to light. Keep the container tightly closed under an inert atmosphere, and store under refrigerated temperatures. (NTP, 1992)

Disposal Methods · 1 Eintrag

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

Isolation and Evacuation · 1 Eintrag

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]:;IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids.;SPILL: Increase the immediate precautionary measure distance, in the downwind direction, as necessary.;FIRE: If tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2024)

Toxikologische Informationen

Environmental Fate · 3 Einträge

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 110(SRC), determined from a log Kow of 1.23(2) and a regression-derived equation(3), indicates that m-cresidine is expected to have high mobility in soil(SRC). However, anilines (aromatic amines) are expected to bind strongly to humus or organic matter in soils due to the high reactivity of the aromatic amino group(4,5), suggesting that mobility may be much lower in some soils(SRC). Volatilization of m-cresidine from moist soil surfaces may be an important fate process(SRC) given an estimated Henry's Law constant of 1.2X10-7 atm-cu m/mole(SRC), using a fragment constant estimation method(6). m-Cresidine is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 0.025 mm Hg(SRC), determined from a fragment constant method(7). Based on data for p-cresidine, a structural analog; m-cresidine is not expected to readily biodegrade in soil(SRC). For example, p-cresidine, present at 100 mg/l, reached 0.7% of its theoretical BOD in 2 weeks, using an activated sludge inoculum at 30 mg/l, and the Japanese MITI test(7).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 110(SRC), determined from a log Kow of 1.23(2) and a regression-derived equation(3), indicates that m-cresidine is expected to adsorb slightly to suspended solids and sediment(SRC). Volatilization from water surfaces may occur (3) based upon an estimated Henry's Law constant of 1.2X10-7 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 15 and 169 days, respectively(SRC). According to a classification scheme(5), an estimated BCF of 2(SRC), from an estimated log Kow(2) and a regression-derived equation(6), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Based on data for p-cresidine, a structural analog; m-cresidine is not expected to readily biodegrade in aqueous environments(SRC). For example, p-cresidine, present at 100 mg/l, reached 0.7% of its theoretical BOD in 2 weeks, using an activated sludge inoculum at 30 mg/l, and the Japanese MITI test(7).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), m-cresidine, which has an estimated vapor pressure of 0.025 mm Hg at 25 °C(SRC), determined from a fragment constant method(2), is expected to exist solely as a vapor in the ambient atmosphere(SRC). Vapor-phase m-cresidine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 3.3 hours(SRC), calculated from its rate constant of 1.2X10-10 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3).

Adverse Effects · 1 Eintrag

Occupational hepatotoxin - Secondary hepatotoxins: the potential for toxic effect in the occupational setting is based on cases of poisoning by human ingestion or animal experimentation.;Methemoglobinemia - The presence of increased methemoglobin in the blood; the compound is classified as secondary toxic effect

Ongoing Test Status · 1 Eintrag

The following link will take the user to the National Toxicology Program (NTP) Test Agent Search Results page, which tabulates all of the "Standard Toxicology & Carcinogenesis Studies", "Developmental Studies", and "Genetic Toxicity Studies" performed with this chemical. Clicking on the "Testing Status" link will take the user to the status (i.e., in review, in progress, in preparation, on test, completed, etc.) and results of all the studies that the NTP has done on this chemical. [http://ntp-apps.niehs.nih.gov/ntp_tox/index.cfm?fuseaction=ntpsearch.searchresults&searchterm=102-50-1]

Soil Adsorption/Mobility · 1 Eintrag

The Koc of m-cresidine is estimated as 110(SRC), using a log Kow of 1.23(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that m-cresidine is expected to have high mobility in soil(SRC). However, anilines (aromatic amines) are expected to bind strongly to humus or organic matter in soils due to the high reactivity of the aromatic amino group(4,5), suggesting that mobility may be much lower in some soils(SRC).

Artificial Pollution Sourcesm-Cresidine's former production and use as a dye intermediate(1) may have resulted in its release to the environment through various waste streams(SRC).
Environmental Biodegradation · 1 Eintrag

AEROBIC: Based on data for p-cresidine, a structural analog; m-cresidine is not expected to readily biodegrade in the environment(SRC). For example, p-cresidine, present at 100 mg/l, reached 0.7% of its theoretical BOD in 2 weeks, using an activated sludge inoculum at 30 mg/l, and the Japanese MITI test(1).

Sicherheitsdaten

wgk
3
tsca
TSCA listed
ridadr
2810
hs_code
29222990
RTECS-Nr.
BZ6730000
risk_code
36/37/38-40-45

Chemie und Industrie

Verwendung und Herstellung

Uses · 2 Einträge

Formerly used in the manufacture of dyes, inks, and pigments; [HSDB]

/Former use:/ Manufacture of dyes, inks and pigments.

General Manufacturing InformationBenzenamine, 4-methoxy-2-methyl-: ACTIVE

Anwendungen

Verwenden4-Methoxy-2-methylaniline is a reagent used in organic synthesis of more complex compounds that have a more specific function. For example, enzyme inhibitors.

Anbieter50 Anbieter

梯希爱(上海)化成工业发展有限公司021-67121386 · [email protected]
上海阿拉丁生化科技股份有限公司400-6206333 13167063860 · [email protected]
温州共赢化学有限公司+86-0086-577-64498589 +86-15355981851 · [email protected]
爱斯特(成都)生物制药股份有限公司+86-28-85122536 85324413 · [email protected]
Hunan Jibang Biological Technology Co., LTD13776644403 · [email protected]

Zugehörige Reaktionen

103

Verknüpfte Notizen

Wird geladen…