StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Verbindung

4'-Methylacetanilid

4-Methylacetanilide

HCID 7684
Neue Reaktion
Drucken
GrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
TeilstruktursucheÄhnliche Strukturen suchen

Grundinformationen

CAS
103-89-9
Standard-SMILES
CC(=O)Nc1ccc(C)cc1
InChIKey
YICAMJWHIUMFDI-UHFFFAOYSA-N
Summenformel
C9H11NO
Durchschnittliche Molmasse
149,19 g/mol
Monoisotopische Masse
149,08406397

Überblick

N-acetyl-p-toluidine appears as colorless needles. (NTP, 1992)

Namen und Bezeichner

Bevorzugter Name
4-Methylacetanilide
IUPAC
N-(4-methylphenyl)acetamide
Lokaler Name
4'-Methylacetanilid
Englischer Name
p-Acetotoluidide
Summenformel
C9H11NO
Molmasse
149.19

Namen und Synonyme

4-MethylacetanilideRefChem:8579664'-Methylacetanilide103-89-9p-AcetotoluidideN-(4-Methylphenyl)acetamideP-AcetotoluideN-ACETYL-P-TOLUIDINEp-Acetotoluidine4-AcetotoluideAcetyl-p-toluidinep-Methylacetanilide
Weitere Namen anzeigen
NSC 7644p-TolyacetamideP-TOLYLACETAMIDE
Acetamide, N-(4-methylphenyl)-p-AcetamidotolueneN-(p-tolyl)acetamide4-(Acetylamino)toluene1-Acetamido-4-methylbenzene4-AcetotoluidideN-Acetyl-p-toluidideN-p-tolylacetamide

Datenbank-Bezeichner

CAS
103-89-9
PubChem CID
7684
DTXSID
DTXSID6024414
ChEMBL
CHEMBL1604472
ChEBI
CHEBI:143108
UNII
N36D4JN82T
EC Number
203-155-4
Nikkaji
J4.024J

Eigenschaften

Berechnete Struktureigenschaften

XLogP
1,7
Polarare Oberfläche (TPSA)
29,1 Ų
H-Brücken-Donoren
1
H-Brücken-Akzeptoren
1
Frei drehbare Bindungen
1
Schwere Atome
11
Formalladung
0
Komplexität
136

Experimentelle und physikochemische Eigenschaften

SpringerMaterials Properties13C nuclear magnetic resonance spectrum
LogP1.4
Density1.212 at 59 °F (NTP, 1992) - Denser than water; will sink
Solubilityless than 1 mg/mL at 70 °F (NTP, 1992)
Flash Point335 °F (NTP, 1992)
Boiling Point585 °F at 760 mmHg (sublimes) (NTP, 1992)
Melting Point307 °F (NTP, 1992)
Vapor Density5.14 (NTP, 1992) - Heavier than air; will sink (Relative to Air)
Physical DescriptionN-acetyl-p-toluidine appears as colorless needles. (NTP, 1992)

Physikochemische Eigenschaften

Sicherheit und Regulatorisches

Sicherheitsangaben dienen nur zur Orientierung und ersetzen weder das Sicherheitsdatenblatt (SDB) des Lieferanten noch geltende Vorschriften oder eine fachliche Bewertung.

GHS-Klassifizierung

GHS Classification · 4 Einträge

Warning

H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]

P261, P264, P264+P265, P270, P271, P280, P301+P317, P302+P352, P304+P340, P305+P351+P338, P319, P321, P330, P332+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 47 reports by companies from 6 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Gefahrenhinweise

Regulatory Information · 2 Einträge

Chemical: Acetamide, N-(4-methylphenyl)-

Acetamide, N-(4-methylphenyl)-: Does not have an individual approval but may be used under an appropriate group standard

Fire HazardsThis chemical is combustible. (NTP, 1992)
Health HazardsACUTE/CHRONIC HAZARDS: When heated to decomposition this compound emits toxic fumes. (NTP, 1992)
Reactive GroupAmides and Imides
Reactivity Profile · 1 Eintrag

N-ACETYL-P-TOLUIDINE is an amide. Flammable gases are formed by the reaction of organic amides with strong reducing agents. Amides are very weak bases (weaker than water). Imides are less basic yet and in fact react with strong bases to form salts. That is, they can react as acids. Mixing amides with dehydrating agents such as P2O5 or SOCl2 generates the corresponding nitrile. The combustion of these compounds generates mixed oxides of nitrogen (NOx).

Air and Water ReactionsWater insoluble.

Chemie und Industrie

Pharmakologische Informationen

Metabolism/Metabolites4'-Methylacetanilide is a known human metabolite of p-Toluidine.

Verwendung und Herstellung

General Manufacturing InformationAcetamide, N-(4-methylphenyl)-: ACTIVE
Anwendungen · 2 Einträge

Beschreibungp-Acetotoluidide is an off-white to brown flake, odourless, solid or crystalline powder (pure form), which is soluble in hot water, alcohol, ether, chloroform, acetone, glycerol, and benzene. It is combustible and undergoes self-ignition (at 5450°C) but is otherwise stable under most conditions. p-Acetanilide on decomposition releases carbon monoxide, oxides of nitrogen, carbon dioxide, and toxic fumes. p-Acetanilide is used as an inhibitor of peroxides and stabiliser for cellulose ester varnishes. It is used as an intermediate for the synthesis of rubber accelerators, dyes and dye intermediate, and camphor. It is also used as a precursor in penicillin synthesis and other pharmaceuticals including painkillers and intermediates. Phenylacetamide structure shows analgesic and antipyretic effects. But acetanilide is not used directly for this application due to causing methemoglobinemia (the presence of excessive methemoglobin which does not function reversibly as an oxygen carrier in the blood).

Verwenden4′-Methylacetanilide was used in the synthesis of stable crystalline phosphorus ylides.

Vor- und nachgelagerte Produkte

Nachgelagerte Produkte

2-Brom-p-toluidinNitrotoluidin2'-Bromo-4'-methylacetanilide

Zugehörige Reaktionen

4
Reaktionsaufzeichnung erstellen
Reaktionsgleichung von HRID 522459
HRID 522459als Produkt
Reaktionsgleichung von HRID 1459125
HRID 1459125als Produkt
Reaktionsgleichung von HRID 1739618
HRID 1739618als Produkt
Reaktionsgleichung von HRID 1739619
HRID 1739619als Edukt

Notizen zur Verbindung

Auf dieser SeiteGrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
Schmelzpunkt
149 · 149-151 °C(lit.)
Siedepunkt
307 °C · 307 °C(lit.)
Dichte
1.21 · 1.21
Dampfdichte
5.14 · 5.14
Brechungsindex
1.5279 · 1.5279 (estimate)
Flammpunkt
168 °C · 168 °C
storage temp.
30 °C · Store below +30°C.
Löslichkeit
1.2 g/l · 1.2g/l (experimental)
Aggregatzustand
Crystals or Crystalline Powder
pka
15.13 · 15.13±0.70(Predicted)
Farbe
Beige to light brown
Wasserlöslichkeit
1 g/L · 1 g/L (25 ºC)
Merck
14 · 14,74
BRN
607036 · 607036
InChI
1S/C9H11NO/c1-7-3-5-9(6-4-7)10-8(2)11/h3-6H,1-2H3,(H,10,11)
InChIKey
YICAMJWHIUMFDI-UHFFFAOYSA-N
SMILES
CC(=O)Nc1ccc(C)cc1
CAS Datenbank
103 · 103-89-9(CAS DataBase Reference)
NIST chemische Informationen
Acetamide, N-(4-methylphenyl)-(103-89-9)
EPA chemische Informationen
p-Acetotoluidide (103-89-9)
Hazard Classes and CategoriesAcute Tox. 4 (100%)

Sicherheit und Schutzausrüstung

Fire FightingFires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
First Aid · 1 Eintrag

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

Nonfire Spill Response · 1 Eintrag

SMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.

Personal Protective Equipment (PPE) · 1 Eintrag

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)

Sicherheitsdaten

wgk
3
tsca
TSCA listed
hs_code
2924299090
RTECS-Nr.
AN2930000
risk_code
22-36/37/38
Toxizität
LD50 orl-rat: 2640 mg/kg MarJV# 29MAR77
hazard_code
Xn
safety_code
26-36
Speicherklasse
11 - Combustible Solids
Hazard Classifications
Acute Tox. 4 OralEye Irrit. 2Skin Irrit. 2STOT SE 3
2,6-Dibrom-p-toluidin
3,4-Dibromotoluene
4-Bromo-3-chlorotoluene
3,5-Dinitrotoluol
Toluol-3,5-diamin
N-(4-Methylphenyl)ethanethioamide