StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Verbindung

Decylbenzene

HCID 7716
Neue Reaktion
Drucken

Daten werden ergänzt – lade die Seite später neu, um den aktuellen Stand zu sehen

GrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
TeilstruktursucheÄhnliche Strukturen suchen

Grundinformationen

CAS
104-72-3
Standard-SMILES
CCCCCCCCCCc1ccccc1
InChIKey
UZILCZKGXMQEQR-UHFFFAOYSA-N
Summenformel
C16H26
Durchschnittliche Molmasse
218,38 g/mol
Monoisotopische Masse
218,20345083

Überblick

N-decylbenzene is a white liquid. Floats on water. (USCG, 1999)

Namen und Bezeichner

Bevorzugter Name
Decylbenzene
IUPAC
decylbenzene
Englischer Name
n-Decylbenzene
Summenformel
C16H26
Molmasse
218.38

Namen und Synonyme

1-PhenyldecaneDECYLBENZENEn-DecylbenzeneBenzene, decyl-phenyldecanen-decyl benzeneDTXSID5051529HSDB 920UNII-KIR29W0BP0EINECS 203-230-1KIR29W0BP0NSC 74191
Weitere Namen anzeigen
NSC-741911-PHENYL-N-DECANEN-DECYLBENZENE [HSDB]DTXCID6030079nDecylbenzene1PhenyldecaneBenzene, decylDecane, 1phenyl

Datenbank-Bezeichner

CAS
104-72-3
PubChem CID
7716
DTXSID
DTXSID5051529
ChEBI
CHEBI:183288
UNII
KIR29W0BP0
EC Number
203-230-1
Nikkaji
J121.267B

Eigenschaften

Berechnete StruktureigenschaftenWird ergänzt

XLogP
7,7
Polarare Oberfläche (TPSA)
0 Ų
H-Brücken-Donoren
0
H-Brücken-Akzeptoren
0
Frei drehbare Bindungen
9
Schwere Atome
16
Formalladung
0
Komplexität
133

Experimentelle und physikochemische Eigenschaften

Chemical Classes · 2 Einträge

Other Classes -> Aromatic Hydrocarbons

Alkylbenzene

SpringerMaterials PropertiesBoiling point
LogP · 2 Einträge

log Kow= 7.37

7.4

Density · 2 Einträge

0.855 at 68 °F (USCG, 1999) - Less dense than water; will float

0.8555 @ 20 °C

Viscosity1.5327X10-2 Pa.s @ 253.15 K
Color/FormCOLORLESS LIQUID
Solubility · 2 Einträge

INSOLUBLE IN WATER

Very soluble in acetone, benzene, ethyl ether, and ethanol

Flash Point · 2 Einträge

225 °F (USCG, 1999)

225 °F (107 °C)

Boiling Point · 2 Einträge

Sicherheit und Regulatorisches

Sicherheitsangaben dienen nur zur Orientierung und ersetzen weder das Sicherheitsdatenblatt (SDB) des Lieferanten noch geltende Vorschriften oder eine fachliche Bewertung.

GHS-Klassifizierung

GHS Classification · 4 Einträge

Warning

H315 (50%): Causes skin irritation [Warning Skin corrosion/irritation]

P261, P264, P264+P265, P271, P273, P280, P302+P352, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 2 reports by companies from 2 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Gefahrenhinweise

DOT LabelClass 9
Fire HazardsExcerpt from ERG Guide 171 [Substances (Low to Moderate Hazard)]:
Health Hazards · 1 Eintrag

Inhalation of vapor causes slight irritation of nose and throat. Aspiration of liquid into lungs causes coughing, distress, and pulmonary edema. Ingestion causes irritation of stomach. Contact with vapor or liquid causes irritation of eyes and mild irritation of skin. (USCG, 1999)

Hazards SummaryAn eye irritant; A mild skin, nose, and throat irritant; [CAMEO] An irritant; [MSDSonline] See Dodecylbenzene.
Reactive GroupHydrocarbons, Aromatic
Reactivity Profile · 1 Eintrag

Vigorous reactions, sometimes amounting to explosions, can result from the contact between aromatic hydrocarbons, such as N-DECYLBENZENE, and strong oxidizing agents. They can react exothermically with bases and with diazo compounds. Substitution at the benzene nucleus occurs by halogenation (acid catalyst), nitration, sulfonation, and the Friedel-Crafts reaction. May attack some forms of plastics (USCG, 1999).

Chemie und Industrie

Verwendung und Herstellung

Uses · 2 Einträge

Used to make linear alkyl sulfonates; [HSDB]

For production of linear alkyl sulfonates

Methods of Manufacturing · 1 Eintrag

REACTION OF BENZENE WITH MONOCHLOROPARAFFIN MIXTURES (ALUMINUM CHLORIDE CATALYST COMPLEX) OR INTERNAL OLEFIN MIXTURES (HYDROGEN FLUORIDE CATALYST) FORMS A MIXTURE OF LINEAR ALKYLBENZENES WITH CHAIN LENGTHS OF C10 TO C14 (C12 OR C13 AVERAGE)

General Manufacturing Information · 2 Einträge

Benzene, decyl-: ACTIVE

INCOMPATIBILITIES: MAY ATTACK SOME FORMS OF PLASTICS.

Zugehörige Reaktionen

2
Reaktionsaufzeichnung erstellen
Reaktionsgleichung von HRID 476330
HRID 476330als Produkt
Reaktionsgleichung von HRID 1166024
HRID 1166024als Edukt

Notizen zur Verbindung

Auf dieser SeiteGrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung

572 °F at 760 mmHg (USCG, 1999)

298 °C

Melting Point-14.4 °C
Vapor Pressure · 2 Einträge

0.00128 [mmHg]

1.28X10-3 mm Hg @ 25 °C

Surface Tension3.4116X10-2 N/m @ 258.77 K

Physikochemische Eigenschaften

Schmelzpunkt
-14.4 °C · -14.4 °C
Siedepunkt
298 °C · 298 °C
Dichte
0.8555 g/cm3 · 0.8555 g/cm3
Air and Water ReactionsInsoluble in water.
NFPA Hazard Classification · 3 Einträge

2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury.

1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur.

0 - Materials that in themselves are normally stable, even under fire conditions.

Hazard Classes and CategoriesSkin Irrit. 2 (50%)
Critical Temperature and PressureCritical temperature: 753 K, critical pressure: 1.77X10+6 Pa
Hazardous Reactivities and IncompatibilitiesMAY ATTACK SOME FORMS OF PLASTICS.

Sicherheit und Schutzausrüstung

Fire FightingFire Extinguishing Agents Not to Be Used: Water or foam may cause frothing.
First AidINHALATION: move to fresh air.
Fire Fighting Procedures · 2 Einträge

DRY CHEMICAL, CARBON DIOXIDE.

WATER OR FOAM MAY CAUSE FROTHING.

Nonfire Spill ResponseExcerpt from ERG Guide 171 [Substances (Low to Moderate Hazard)]:
Disposal Methods · 1 Eintrag

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

Isolation and EvacuationExcerpt from ERG Guide 171 [Substances (Low to Moderate Hazard)]:
Personal Protective Equipment (PPE)Goggles or face shield; rubber gloves (USCG, 1999)

Toxikologische Informationen

Environmental Fate · 3 Einträge

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 2.4X10+5(SRC), determined from a regression derived equation(2), indicates that decylbenzene is expected to be immobile in soil(SRC). Microbial metabolism is expected to be the primary degradation process for linear alkyl benzenes(LAB) in nature(3). LAB undergoes rapid primary biodegradation in natural waters and the same is expected to occur in soil environments(3). Volatilization of decylbenzene from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 0.0761 atm-cu m/mole(SRC), using a fragment constant estimation method(4). However, adsorption to soil is expected to attenuate volatilization(SRC). Decylbenzene is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 1.28X10-3 mm Hg(5).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 2.4X10+5(SRC), determined from a regression derived equation(2), indicates that decylbenzene is expected to adsorb to suspended solids and sediment in water(SRC). Volatilization from water surfaces is expected(2) based upon an estimated Henry's Law constant of 0.0761 atm-cu m/mole(SRC), developed using a fragment constant estimation method(3). Volatilization half-lives for a model river and model lake are 4.33 hrs and 140 hrs, respectively(SRC), using an estimation method(3). However, the volatilization half-life does not take into account the effects of adsorption. An estimated Koc of 2.4X10+5 suggests that volatilization could be attenuated by adsorption to suspended solids and sediments in water(SRC). This is apparent from the results of two EXAMS model runs, one in which the effect of adsorption was considered, yielding an estimated half-life of 57 months in a model pond 2 m deep, and one in which the effect of adsorption was ignored, yielding an estimated half-life of 65 hrs in a model pond 2 m deep(4). River die-away tests have shown linear alkyl benzenes are readily biodegradable with half-lives of 7.3 and 11.4 days for C-10 isomers(5). A BCF of 35(6) for dodecylbenzene measured in fish suggests that bioconcentration of decylbenzene in aquatic organisms is moderate(7).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), decylbenzene, which has a vapor pressure of 1.28X10-3 mm Hg at 25 °C(2) is expected to exist solely in the vapor-phase in the ambient atmosphere. Vapor-phase decylbenzene is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 22.4 hrs(SRC), calculated from its estimated rate constant of 1.72X10-11 cu cm/molecule-sec at 25 °C(SRC)determined using a structure estimation method(3).

Food Survey ValuesDecylbenzene was detected in beef presumably derived from the thermal oxidative decomposition of lipids, concentration not specified(1).
Soil Adsorption/Mobility · 1 Eintrag

The Koc of decylbenzene is estimated as 2.4X10+5(SRC), using a log Kow of 7.37(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that decylbenzene is expected to be immobile in soil.

Natural Pollution SourcesDecylbenzene has been detected in beef products, presumably derived from the thermal oxidative decomposition of lipids(1).
Artificial Pollution Sources · 1 Eintrag

Decylbenzene's production and use as in linear alkyl sulfonate(LAS) detergents(1) may result in its release to the environment through various waste streams. The vast majority of manufactured linear alkylbenzenes (LAB) are converted to LAS detergents which may contain 1 to 3% residual unsulfonated LAB(1).

Environmental BiodegradationRiver die-away tests have shown linear alkyl benzenes are readily biodegradable with half-lives of 7.3 and 11.4 days for C-10 isomers(1). Linear alkyl benzene compounds are readily biodegradable in natural waters(1).
Environmental Bioconcentration · 1 Eintrag

An estimated BCF of 636 was calculated for decylbenzene(SRC), using a log Kow of 7.37(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is high. An experimental BCF of 35(4) for dodecylbenzene measured in bluegill sunfish suggests that bioconcentration of decylbenzene in aquatic organisms is moderate(3). This lower value is suspected to be due mainly to metabolism(4).

Volatilization from Water/Soil · 1 Eintrag

The Henry's Law constant for decylbenzene is estimated as 0.076 atm-cu m/mole(SRC) from its experimental values for vapor pressure, 1.28X10-3 mm Hg(1), and water solubility, 2.40X10-3 mg/l(2). This Henry's Law constant indicates that decylbenzene is expected to volatilize rapidly from water surfaces(3). Based on this Henry's Law constant, the volatilization half-life from a model river (1 m deep, flowing 1 m/sec, wind velocity of 3 m/sec)(3) is estimated as approximately 4.33 hrs(SRC). The volatilization half-life from a model lake (1 m deep, flowing 0.05 m/sec, wind velocity of 0.5 m/sec)(3) is estimated as approximately 140 hrs(SRC). However, the volatilization half-life does not take into account the effects of adsorption. An estimated Koc of 2.43X10+5(SRC), from a log Kow of 7.37(4) and a regression-derived equation(3), suggests that volatilization could be attenuated by adsorption to suspended solids and sediments in water(SRC). This is apparent from the results of two EXAMS model runs, one in which the effect of adsorption was considered, yielding an estimated half-life of 57 months in a model pond 2 m deep, and one in which the effect of adsorption was ignored, yielding an estimated half-life of 65 hrs in a model pond 2 m deep(5). Decylbenzene's estimated Henry's Law constant(1,2) indicates that volatilization from moist soil surfaces may occur, but adsorption may attenuate this process(SRC). Decylbenzene is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 1.28X10-3 mm Hg(1).

Environmental Abiotic Degradation · 1 Eintrag

The rate constant for the vapor-phase reaction of decylbenzene with photochemically-produced hydroxyl radicals has been estimated as 1.72X10-11 cu cm/molecule-sec at 25 °C(SRC) using a structure estimation method(1). This corresponds to an atmospheric half-life of about 22.4 hrs at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(1). Decylbenzene is not expected to undergo hydrolysis in the environment due to the lack of hydrolyzable functional groups(2) nor photolyze due to the lack of absorption in the environmental UV spectrum.

Probable Routes of Human Exposure · 1 Eintrag

Occupational exposure to decylbenzene may occur through inhalation of this compound at workplaces where decylbenzene is produced or used(SRC). The general population may be exposed to decylbenzene via ingestion of food(1) and drinking water(2-5) and by use of LAS detergent products containing decylbenzene(6).

Environmental Water Concentrations · 3 Einträge

GROUNDWATER: Decylbenzene was detected in groundwater samples, potentially polluted from industrial processes, collected in the United Kingdom on February 12, 1979, concentrations not specified(1).

DRINKING WATER: Decylbenzene was detected in finished water from an advanced water treatment plant in Lake Tahoe from Jun 1977-Nov 1980, concentration not specified(1).

SURFACE WATER: Decylbenzene was detected in water samples taken from the Besos River near Barcelona, Spain in Aug 1985, concentrations not specified(1). Decylbenzene was detected in water samples from Stockacher Aach River in Germany, concentrations not specified(2).

Environmental Fate/Exposure Summary · 1 Eintrag

Decylbenzene's production for use in linear aklylsulfonates may result in its release to the environment through various waste streams. If released to air, a vapor pressure of 1.28X10-3 mm Hg at 25 °C indicates decylbenzene will exist solely in the vapor-phase in the ambient atmosphere. Vapor-phase decylbenzene will be degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals; the half-life for this reaction in air is estimated to be 22.4 hrs. If released to soil, decylbenzene is expected to be immobile based upon an estimated Koc of 2.4X10+5. Volatilization from moist soil surfaces is expected to be an important fate process based upon an estimated Henry's Law constant of 0.0761 atm-cu m/mole. However, adsorption to soil is expected to attenuate volatilization. Decylbenzene is not expected to volatilize from dry soil surfaces based upon its vapor pressure. If released into water, decylbenzene is expected to adsorb to suspended solids and sediment based upon the estimated Koc. River die-away tests have shown linear alkyl benzenes are readily biodegradable with half-lives of 7.3 and 11.4 days for C-10 isomers. Volatilization from water surfaces is expected to be an important fate process based upon this compound's estimated Henry's Law constant. Estimated volatilization half-lives for a model river and model lake are 4.33 and 140 hrs, respectively. However, volatilization from water surfaces is expected to be attenuated by adsorption to suspended solids and sediment in the water column. A BCF of 35 for dodecylbenzene measured in fish suggests that bioconcentration of decylbenzene in aquatic organisms is moderate. Hydrolysis is not expected to occur due to the lack of hydrolyzable functional groups. Occupational exposure to decylbenzene may occur through inhalation and dermal contact with this compound at workplaces where decylbenzene is produced or used. The general population may be exposed to decylbenzene via ingestion of drinking water and use of LAS detergent products containing decylbenzene. (SRC)