StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.1
  1. Startseite
  2. /Verbindung

Toluol-4-thiol

4-Methylbenzenethiol

HCID 7811
Neue Reaktion
Drucken

Daten werden ergänzt – lade die Seite später neu, um den aktuellen Stand zu sehen

GrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
TeilstruktursucheÄhnliche Strukturen suchen

Grundinformationen

CAS
106-45-6
Standard-SMILES
Cc1ccc(S)cc1
InChIKey
WLHCBQAPPJAULW-UHFFFAOYSA-N
Summenformel
C7.H8.S
Durchschnittliche Molmasse
124,21 g/mol
Monoisotopische Masse
124,03467143

Überblick

structure in first source

Namen und Bezeichner

Bevorzugter Name
4-Methylbenzenethiol
IUPAC
4-methylbenzenethiol
Lokaler Name
Toluol-4-thiol
Englischer Name
p-Toluenethiol
Summenformel
C7H8S
Molmasse
124.2

Namen und Synonyme

4-Methylbenzenethiolp-Thiocresolp-Toluenethiol106-45-64-Methylthiophenol4-THIOCRESOLp-Tolyl mercaptan4-Toluenethiolp-Methylthiophenolp-Tolylthiolp-Mercaptotoluenep-Thiolcresol
Weitere Namen anzeigen
para-thiocresolp-Thiocreso4-MERCAPTOTOLUENE4-TOLYL MERCAPTAN
p-Methylbenzenethiol1-Mercapto-4-methylbenzenep-Methylphenyl mercaptan4-Methylphenyl mercaptanUSAF EK-5104-MethylphenylmercaptanToluene, 4-mercapto-DTXSID5048188

Datenbank-Bezeichner

CAS
106-45-6
PubChem CID
7811
DTXSID
DTXSID5048188
ChEMBL
CHEMBL119359
UNII
6L2WW9XYZO
EC Number
203-399-1
Nikkaji
J5.051B

Eigenschaften

Berechnete StruktureigenschaftenWird ergänzt

XLogP
2,9
Polarare Oberfläche (TPSA)
1 Ų
H-Brücken-Donoren
1
H-Brücken-Akzeptoren
1
Frei drehbare Bindungen
0
Schwere Atome
8
Formalladung
0
Komplexität
62,8

Experimentelle und physikochemische Eigenschaften

Chemical ClassesOther Classes -> Sulfur Compounds
SpringerMaterials Properties13C nuclear magnetic resonance spectrum
LogP3.27
Density1.2475 @ 55°C
Color/FormLeaflets
SolubilityInsol in water; sol in alcohol, ether
Flash Point68 °C
Boiling Point · 2 Einträge

195 °C @ 760 mm Hg

195 °C @760 [mm Hg]

DecompositionWhen heated to decomposition it emits toxic fumes of /sulfur oxides/.
Melting Point43-44 °C
Odor ThresholdOdor detection in air= 1.0X10-4 mg/l (gas) chemically pure

Sicherheit und Regulatorisches

Sicherheitsangaben dienen nur zur Orientierung und ersetzen weder das Sicherheitsdatenblatt (SDB) des Lieferanten noch geltende Vorschriften oder eine fachliche Bewertung.

GHS-Klassifizierung

GHS Classification · 4 Einträge

Danger

H301 (25%): Toxic if swallowed [Danger Acute toxicity, oral]

P260, P261, P262, P264, P264+P265, P270, P271, P280, P284, P301+P316, P301+P317, P302+P352, P304+P340, P305+P351+P338, P305+P354+P338, P316, P317, P319, P320, P321, P330, P332+P317, P337+P317, P361+P364, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 16 reports by companies from 10 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Gefahrenhinweise

Regulatory Information4-Methylthiophenol: Does not have an individual approval but may be used under an appropriate group standard
Hazards SummaryEmergency treatment: Phenol and related agents; [HSDB] An irritant; Inhalation may cause CNS effects (strong odor will minimize inhalation exposure); [Alfa Aesar MSDS] See Phenol.
Toxic Combustion ProductsWhen heated to decomp, it emits toxic fumes of /sulfur oxides/.
Hazard Classes and CategoriesAcute Tox. 3 (25%)

Sicherheit und Schutzausrüstung

Disposal Methods · 1 Eintrag

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

Chemie und Industrie

Verwendung und Herstellung

Uses · 4 Einträge

Used as an antiseptic, dermatologic agent, and bleach in the manufacture of latex; [HSDB] Used as an intermediate in the manufacture of chemicals; [CHEMINFO]

Using Disinfectants or Biocides [Category: Clean]

Antiseptic; dermatologic /Unspecified isomer/

As a bleach in the manufacture of latex /tolyl mercaptan, isomer not stated/

General Manufacturing InformationBenzenethiol, 4-methyl-: ACTIVE

Anwendungen

Verwendenp-Thiocresol is used as a pharmaceutical intermediate.

Vor- und nachgelagerte Produkte

Vorgelagerte Rohstoffe

O-EthylhydrogendithiocarbonatDi-p-tolyldisulfidNatriumtoluol-4-sulfinat4-Tolylboronic acidp-ToluidiniumchloridToluol-2-thiolDimethyldisulfidToluol-4-sulfonamidMethyl-p-tolylsulfidToluol-4-sulfonsureChlortoluol (p)p-ToluidinNatriumtoluol-4-sulfonat

Zugehörige Reaktionen

214
Reaktionsaufzeichnung erstellen
Reaktionsgleichung von HRID 6690
HRID 6690als Eduktuspto-grants-2006_08
Reaktionsgleichung von HRID 9886
HRID 9886als Eduktuspto-grants-2006_08
Reaktionsgleichung von HRID 14357
HRID 14357als Eduktuspto-grants-2010_06
Reaktionsgleichung von HRID 15207
HRID 15207als Eduktuspto-grants-2010_06
Reaktionsgleichung von HRID 15209
HRID 15209als Eduktuspto-grants-2010_06
Reaktionsgleichung von HRID 15213
HRID 15213als Eduktuspto-grants-2010_06
Reaktionsgleichung von HRID 28115
HRID 28115als Eduktuspto-grants-1980_09
Reaktionsgleichung von HRID 64483
HRID 64483als Eduktuspto-grants-2016_09
ZurückSeite 1 von 27

Notizen zur Verbindung

Auf dieser SeiteGrundinformationenÜberblickNamen und BezeichnerEigenschaftenSicherheit und RegulatorischesChemie und IndustrieZugehörige ReaktionenNotizen zur Verbindung
Vapor Pressure · 3 Einträge

0.8 [mmHg]

0.807 mm Hg @ 25 °C

0.807 [mm Hg] @25 °C

Physikochemische Eigenschaften

Schmelzpunkt
84 · 84-86(lit.)
Siedepunkt
195 °C · 195 °C(lit.)
Dichte
1.022 · 1.0220
Dampfdichte
6.2 · 6.2 (vs air)
Dampfdruck
10 mm · 10 mm Hg ( 71 °C)
Brechungsindex
1.542 · 1.5420 (estimate)
Flammpunkt
155 °F · 155 °F
storage temp.
30 °C · Store below +30°C.
Löslichkeit
Chloroform (Slightly), Methanol (Slightly)
Aggregatzustand
Fused Solid
pka
1 · pK1:6.52 (25°C)
Farbe
White to yellow
Wasserlöslichkeit
slightly soluble
Merck
14 · 14,9325
BRN
605761 · 605761
Henry's Law Constant
2.7 · 2.7×10-2 mol/(m3Pa) at 25℃, HSDB (2015)
Stabilität
Smelly, Air Sensitive
InChI
1S/C7H8S/c1-6-2-4-7(8)5-3-6/h2-5,8H,1H3
InChIKey
WLHCBQAPPJAULW-UHFFFAOYSA-N
SMILES
Cc1ccc(S)cc1
LogP
2.98 · 2.980 (est)
CAS Datenbank
106 · 106-45-6(CAS DataBase Reference)
NIST chemische Informationen
4 · Benzenethiol, 4-methyl-(106-45-6)
EPA chemische Informationen
4 · Benzenethiol, 4-methyl- (106-45-6)
Protective Action Criteria (PAC) · 3 Einträge

0.66 [mg/m3]

7.2 [mg/m3]

43 [mg/m3]

Toxikologische Informationen

Environmental Fate · 3 Einträge

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 430(SRC), determined from a structure estimation method(2), indicates that 4-thiocresol is expected to have moderate mobility in soil(SRC). The pKa of 4-thiocresol is 6.82(3) indicating that the anionic form of 4-thiocresol will exist in slightly acidic to basic soils and anions are expected to have higher mobility than the neutral species(SRC). Volatilization of 4-thiocresol from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 3.6X10-4 atm-cu m/mole(SRC), using a fragment constant estimation method(4). However, 4-thiocresol in the anionic form will not volatilize. 4-Thiocresol is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.807 mm Hg(5).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 430(SRC), determined from an estimation method(2), indicates that 4-thiocresol is expected to slightly adsorb to suspended solids and sediment(SRC). Volatilization of the neutral species from water surfaces is expected(3) based upon an estimated Henry's Law constant of 3.6X10-4 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 3 hrs and 5.2 days, respectively(SRC). A pKa of 6.82(5) indicates that the anionic form of 4-thiocresol will exist in slightly acidic to basic waters and the anionic form will not volatilize from water(SRC). According to a classification scheme(6), an estimated BCF of 62(SRC), from an estimated log Kow of 3.2(7) and a regression-derived equation(8), suggests the potential for bioconcentration in aquatic organisms is moderate.

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 4-thiocresol, which has a vapor pressure of 0.807 mm Hg at 25 °C(2), is expected to exist solely in the vapor-phase in the ambient atmosphere. Vapor-phase 4-thiocresol is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 27 hrs(SRC), calculated from its rate constant of 1.4X10-11 cu cm/molecule-sec at 25 °C(SRC) determined using a structure estimation method(3). Although thiocresols may be susceptible to photolysis, sufficient experimental data are not available to predict the relative importance of their photolysis in the environment(SRC).

Adverse EffectsNeurotoxin - Other CNS neurotoxin
Effluent ConcentrationsThe concentration of 4-thiocresol in a raw sludge from a wood preservation operation has been reported to be 0.52 g/l(1).
Soil Adsorption/Mobility · 1 Eintrag

Using a structure estimation method based on molecular connectivity indices(1), the Koc for 4-thiocresol can be estimated to be 430(SRC). According to a classification scheme(2), this estimated Koc value suggests that 4-thiocresol is expected to have moderate mobility in soil. The pKa of 4-thiocresol is 6.82(3) indicating that the anionic form of 4-thiocresol will exist in slightly acidic to basic soils and anions are expected to have higher mobility than the neutral species(SRC). Volatilization from moist soil surfaces is not expected to be an important fate process for the anionic species.

Artificial Pollution Sources4-Thiocresol's possible production as an antiseptic(1) may result in its release to the environment through various waste streams(SRC).
Environmental Bioconcentration · 1 Eintrag

An estimated BCF of 62 was calculated for 4-thiocresol(SRC), using an estimated log Kow of 3.2(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is moderate.

Volatilization from Water/Soil · 1 Eintrag

The Henry's Law constant for 4-thiocresol is estimated as 3.6X10-4 atm-cu m/mole(SRC) using a fragment constant estimation method(1). This Henry's Law constant indicates that 4-thiocresol is expected to volatilize from water surfaces(2). Based on this Henry's Law constant, the volatilization half-life of the neutral species from a model river (1 m deep, flowing 1 m/sec, wind velocity of 3 m/sec)(2) is estimated as 3 hrs(SRC). The volatilization half-life of the neutral species from a model lake (1 m deep, flowing 0.05 m/sec, wind velocity of 0.5 m/sec)(2) is estimated as 5.2 days(SRC). A pKa of 6.82(3) for 4-thiocresol indicates that the anionic form of 4-thiocresol will exist in slightly acidic to basic waters and the anionic form is not expected to volatilize from water(SRC). 4-Thiocresol's Henry's Law constant(1) indicates that volatilization of the neutral species from moist soil surfaces may occur(SRC). However, 4-thiocresol in the anionic form is not expected to volatilize. 4-Thiocresol is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.807 mm Hg(4).

Non-Human Toxicity ExcerptsPoisonous by intraperitoneal route.
Environmental Abiotic Degradation · 1 Eintrag

The rate constant for the vapor-phase reaction of 4-thiocresol with photochemically-produced hydroxyl radicals has been estimated as 1.4X10-11 cu cm/molecule-sec at 25 °C(SRC) using a structure estimation method(1). This corresponds to an atmospheric half-life of approximately 27 hrs at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(1). 4-Thiocresol is not expected to undergo hydrolysis in the environment due to the lack of hydrolyzable functional groups(2). Although thiocresols may be susceptible to photolysis, sufficient experimental data are not available to predict the relative importance of their photolysis in the environment(SRC).

Probable Routes of Human ExposureOccupational exposure to 4-thiocresol may occur through inhalation and dermal contact with this compound at workplaces where 4-thiocresol is produced. (SRC)
Environmental Fate/Exposure Summary · 1 Eintrag

4-Thiocresol's possible production as an antiseptic may result in its release to the environment through various waste streams. If released to air, a vapor pressure of 0.807 mm Hg at 25 °C indicates 4-thiocresol will exist solely in the vapor phase in the ambient atmosphere. Vapor-phase 4-thiocresol will be degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals; the half-life for this reaction in air is estimated to be 27 hrs. Although thiocresols may be susceptible to photolysis, sufficient experimental data are not available to predict the relative importance of their photolysis in the environment. If released to soil, 4-thiocresol is expected to have moderate mobility based upon an estimated Koc of 430. The pKa of 4-thiocresol is 6.82 indicating that the anionic form of 4-thiocresol will exist in slightly acidic to basic soils and these anions are expected to have higher mobility than the neutral species. Volatilization from moist soil surfaces is expected to be an important fate process based upon an estimated Henry's Law constant of 3.6X10-4 atm-cu m/mole. However, volatilization of the anionic species from moist soil surfaces will not occur. 4-Thiocresol is not expected to volatilize from dry soil surfaces based upon its vapor pressure. If released into water, 4-thiocresol is expected to slightly adsorb to suspended solids and sediment based upon the estimated Koc. Volatilization of the neutral species from water surfaces is expected to be an important fate process based upon this compound's estimated Henry's Law constant. However, based on the pKa, the anionic form of 4-thiocresol will exist in slightly acidic to basic waters and the anionic form will not volatilize from water. Estimated volatilization half-lives of the neutral species for a model river and model lake are 3 hrs and 5.2 days, respectively. An estimated BCF of 62 suggests the potential for bioconcentration in aquatic organisms is moderate. Hydrolysis is not expected to occur due to the lack of hydrolyzable functional groups. Occupational exposure to 4-thiocresol may occur through inhalation and dermal contact with this compound at workplaces where 4-thiocresol is produced or used. (SRC)

Non-Human Toxicity ValuesLD50 Mouse ip 200 mg/kg

Sicherheitsdaten

F
13
wgk
3
tsca
TSCA listed
ridadr
2811
hs_code
29309070
RTECS-Nr.
XT8925000
risk_code
36/37/38-20/21/22
hazard_code
Xi,Xn
hazard_note
Harmful/Stench
safety_code
26-36-36/37/39-60-36/37-9
hazard_class
6.1
packing_group
III
Speicherklasse
11 - Combustible Solids
Giftige Stoffe Daten
106-45-6(Hazardous Substances Data)
Hazard Classifications
Eye Irrit. 2

Nachgelagerte Produkte

5-Methyl-1-benzothiophene-2-carbaldehydeToluol-4-sulfinsure2-[(4-Methylphenyl)thio]-5-nitrobenzaldehyde6-Nitroveratrumaldehyd(4-Tolylsulfonyl)essigsure2-[(4-Methylphenyl)sulfonyl]ethanol2,2'-[[9,10-Dihydro-9,10-dioxo-6-[(4-methylphenyl)thio]anthracene-1,4-diyl]diimino]bis[5-methylbenzenesulfonic acid sodium] salt