Zurück
HuagongsheHuagongshe Chemie-Druckbericht · Nur für Forschungszwecke
HCID 7910Erstellt: 26. Oktober 2026

4-Methylpentan-2-ol

MIBC · METHYL ISOBUTYL CARBINOL · 4-Methylpentan-2-ol · MAOH · 4-methyl-2-pentano · 2-METHYL-4-PENTANOL · FEMA 3351 · METHYL AMYL ALCOHOL

https://huagongshe.com/de/chemical/7910

Molekülstruktur von 4-Methylpentan-2-ol

Identifikatoren & physikalische Daten

CAS No.108-11-2
SummenformelC6H14O
Durchschnittliche Molmasse102,17 g/mol
Monoisotopische Masse102,10446507 g/mol
SMILESCC(C)CC(C)O
InChIKeyWVYWICLMDOOCFB-UHFFFAOYSA-N
PubChem CID7910
ChEMBLCHEMBL448896
EC No.203-551-7
DTXSIDDTXSID2026781
Lokaler Name4-Methylpentan-2-ol

Chemische & physikalische Eigenschaften

XLogP1,7
Polarare Oberfläche (TPSA)20,2
H-Brücken-Donoren1
H-Brücken-Akzeptoren1
Frei drehbare Bindungen2
Schwere Atome7
Formalladung0
Komplexität41,4
StoffklassenFlammable agents - 2nd degreeVolatile Organic Compound (VOC)
SolventsSolvents -> Alcohols (<C12)
DuftstoffeFragrance Ingredient (4-Methyl-2-pentanol) -> IFRA transparency List
LogP (Verteilungskoeffizient)log Kow= 1.43
GeruchMild odor.
Dichte0.807 at 68 °F (USCG, 1999) - Less dense than waterwill float0.8075 @ 20 °C/4 °C% IN SATURATED AIR: 0.46 @ 20 °CDENSITY OF SATURATED AIR: 1.01 (AIR= 1)Relative density (water = 1): 0.820.810.802 g/mL at 25 °C(lit.)
AromastoffeEU Flavoring substances
Color/FormCOLORLESS LIQColorless liquid.
Löslichkeit2 % (NIOSH, 2024)SOL IN ALC & ETHER.MISCIBLE WITH MOST COMMON ORG SOLVENTS.Water solubility of 1.64X10+4 mg/kg (experimental).Solubility in water, g/100ml: 22%16.4g/l2 g/100 mL
Flammpunkt106 °F (USCG, 1999)105 °F105 °F (OPEN CUP)41 °C107 °F
Siedepunkt269.2 °F at 760 mmHg (USCG, 1999)133 °C @ 760 MM HG132 °C271 °F134-135 °C(lit.)
Schmelzpunktless than -130 °F (USCG, 1999)-90 °C
Dampfdichte3.5 (vs air)
Dampfdruck3.7 mm Hg ( 20 °C)
Brechungsindexn20/D 1.415(lit.)
LagerbedingungenStore below +30°C.
AggregatzustandLiquid
pKa (Säurekonstante)15.31±0.20(Predicted)
FarbeClear colorless
GeruchSharpmild and nonresidual.
Geruchsartpungent
Explosionsgrenze1-5.5%(V)
Spezifische WärmekapazitätCp(liquid): 2.67 J/(g·K), at 25℃
BRN1098268
Henry-Konstante2.2×10-1 mol/(m3Pa) at 25℃, Brockbank (2013)
StabilitätStable. Flammable. Incompatible with oxidizing agents, acids, acid chlorides.
Kosmetik-Inhaltsstoffe FunktionenPERFUMING
InChI1S/C6H14O/c1-5(2)4-6(3)7/h5-7H,4H2,1-3H3
InChIKeyWVYWICLMDOOCFB-UHFFFAOYSA-N
SMILESCC(C)CC(C)O
LogP (Verteilungskoeffizient)1.57 at 20℃
CAS Datenbank108-11-2(CAS DataBase Reference)
NIST chemische Informationen2-Pentanol, 4-methyl-(108-11-2)
EPA chemische Informationen4-Methyl-2-pentanol (108-11-2)

Sicherheit & Vorschriften

GHS-EinstufungWarningH226: Flammable liquid and vapor [Warning Flammable liquids]P210, P233, P240, P241, P242, P243, P261, P271, P280, P303+P361+P353, P304+P340, P319, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)H226 (100%): Flammable liquid and vapor [Warning Flammable liquids]P210, P233, P240, P241, P242, P243, P261, P264+P265, P271, P280, P303+P361+P353, P304+P340, P305+P351+P338, P319, P337+P317, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)
Regulatorische InformationenChemical: 2-Pentanol, 4-methyl-Commission Regulation (EC) No 1565/2000 (Repealed by Com. Implementing Reg. (EU) No 872/2012)2-Pentanol, 4-methyl- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 2-Pentanol, 4-methyl- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)Status: Active Update: 03-04-2023 https://echa.europa.eu/registration-dossier/-/registered-dossier/161892-Pentanol, 4-methyl-: HSNO Approval: HSR001193 Approved with controlsThe New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)
Weitere SicherheitsinformationenIMAP assessments - 2-Pentanol, 4-methyl-: Environment tier I assessment
DOT-KennzeichnungFlammable Liquid
BrandgefahrenExcerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:· HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.Flammable. Above 41 °C explosive vapour/air mixtures may be formed.
BrandpotenzialMODERATE FIRE RISK.
GesundheitsgefahrenVapor irritates eyes and nosemay cause anesthesia. Prolonged contact with liquid causes irritation and cracking of skinalso irritates eyes. (USCG, 1999)· May cause toxic effects if inhaled or absorbed through skin.
GefahrenübersichtIn acute animal studies, high concentrations induce narcosis and anesthesia. [ACGIH] Inhalation of high concentrations can cause CNS depressionA skin, eye, and respiratory tract irritant[ICSC]
DOT-Nummer und Handbuch2053 129
Reaktive GruppeAlcohols and Polyols
EG-EinstufungSymbol: XiR: 10-37S: (2)-24/25
UN-EinstufungUN Hazard Class: 3UN Pack Group: III
OSHA StandardsPermissible Exposure Limit: Table Z-1 8-hr Time-Weighted Avg: 25 ppm (100 mg/cu m). Skin Designation.Vacated 1989 OSHA PEL TWA 25 ppm (100 mg/cu m)STEL 40 ppm (165 mg/cu m), skin designation, is still enforced in some states.
BrandbekämpfungExcerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:Use water spray, powder, alcohol-resistant foam, carbon dioxide.
Erste-Hilfe-MaßnahmenFresh air, rest. Artificial respiration may be needed. Refer for medical attention.Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention .First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.Rinse mouth. Rest. Refer for medical attention .
Freisetungsmaßnahmen· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.
Erste HilfeExcerpt from NIOSH Pocket Guide for Methyl isobutyl carbinol:General First Aid:(General first aid procedures)
Sichere LagerungFireproof if in building. Separated from strong oxidants. Cool.
Expositionsschutz und Persönliche Schutzausrüstung· Wear positive pressure self-contained breathing apparatus (SCBA).20.0 [ppm]
BrandbekämpfungsverfahrenALCOHOL FOAM.
Freisetung ohne BrandExcerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:
Verschüttetes entsorgenPersonal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Ventilation. Collect leaking liquid in sealable containers. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. Do NOT wash away into sewer.
Preventive MeasuresThe worker should immediately wash the skin when it becomes contaminated.Work clothing that becomes wet or significantly contaminated should be removed and replaced.SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.
Isolation and EvacuationExcerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:Immediate precautionary measure
Eye PreventionWear safety goggles.
ZielorganeEyes, skin, central nervous system
ÖkotoxizitätswerteLD50 Goldfish 360 mg/l/24 hr (modified ASTM D 1345)
UmweltverhaltenTERRESTRIAL FATE: If 4-methyl-2-pentanol is released to soil, it will be expected to exhibit high to very high mobility in soil(1,SRC) based upon estimated Koc of 143 and 21 estimated from log Kow(2) and water solubility(3), respectively, using a recommended regression equations(4,SRC). It may, therefore, leach through soil(SRC). It will not hydrolyze in moist soil(4), but it may be subject to volatilization from near surface soil based upon estimated rates for its volatilization from water(4-6). It may be subject to biodegradation in soil based upon the rapid biodegradation observed in laboratory aqueous screening tests using sewage and activated sludge inoculum(7,8).AQUATIC FATE: If 4-methyl-2-pentanol is released to water, it will not be expected to adsorb to sediment and suspended particulate matter or to bioconcentrate in aquatic organisms based upon estimated Koc and BCF, respectively, estimated(2,SRC) from the measured log Kow (1) and water solubility(3). It will not be expected to hydrolyze(2) or directly photolyze(4,SRC). It may be subject to biodegradation in natural waters based upon the rapid biodegradation observed in laboratory aqueous screening tests using sewage and activated sludge inoculum(5,6). It will be subject to volatilization from surface waters based upon half-lives of 23 hr for volatilization from a model river one meter deep flowing 1 m/sec with a wind velocity of 3 m/sec(2,SRC) and 10.6 days for volatilization from a model pond(7,SRC), respectively, estimated using a measured Henry's Law constant(8).ATMOSPHERIC FATE: If 4-methyl-2-pentanol is released to the atmosphere, it can be expected to exist mainly in the vapor-phase in the ambient atmosphere(1,SRC) based upon an experimental vapor pressure of 5.3 mm Hg at 25 °C(2,SRC). The measured rate constant for vapor-phase reaction with photochemically produced hydroxyl radicals of 7.1X10-12 cu cm/molecule-sec at 25 °C(3) corresponds to an atmospheric half-life of 2.3 days at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(SRC). 4-Methyl-2-pentanol has been rated a moderately reactive (Class III) compound(4) with respect to ozone formation as observed in smog chamber tests(5). 4-Methyl-2-pentanol will not be expected to directly photolyze in the atmosphere(6,SRC).
Lebensmitteluntersuchungswerte4-Methyl-2-pentanol was qualitatively detected in the mixture of volatiles from mountain Beaufort cheese(1).
Unerwünschte WirkungenNeurotoxin - Acute solvent syndrome
ExpositionspfadeThe substance can be absorbed into the body by inhalation of its vapour and through the skin.inhalation, skin absorption, ingestion, skin and/or eye contact
Signs and SymptomsCough. Sore throat. Unconsciousness.Dry skin. Redness. Pain.irritation eyes, skinheadache, drowsinessdermatitisIn Animals: narcosis
Effluent Concentrations4-Methyl-2-pentanol was detected at a concn of 136 ppb in a sample of influent water from an unspecified municipal wastewater treatment plant(1). It was not indicated whether the compound was detected in final effluent from the plant(1). It was detected at a concn of 45 ppb in effluent samples taken from the Los Angeles County wastewater treatment plant discharge, Palos Verdes, CA between Nov 1980 and Aug 1981(2). A concn of 140 ppm was found in samples of leachate or samples of groundwater plume taken at an unspecified industrial landfill at an unspecified time(3). 4-Methyl-2-pentanol was qualitatively detected in 4 of 16 samples of concentrate derived from large volume (>400 gallons) samples of advanced treatment concentrate from 4 of 6 cities (Lake Tahoe, CA, Oct 1974Pomona, CA, 1975Orange County, CA, Feb 1976Blue Plains, Washington, DC, May 1975)(4).
Soil Adsorption/MobilityBased upon an experimental log Kow of 1.43(1), a Koc of 143 has been estimated using a recommended regression equation(2). Based upon an experimental water solubility of 1.64X10+4 mg/kg(3), a Koc of 21 has been estimated using a recommended regression equation(2). Based upon these estimated Koc, 4-methyl-2-pentanol will be expected to exhibit high to very high mobility in soil(4). 4-Methyl-2-pentanol, therefore, may leach through soil to groundwater if it does not volatilize or biodegrade first(SRC).
Natural Pollution Sources4-Methyl-2-pentanol was qualitatively detected in the mixture of volatiles from mountain Beaufort cheese(1) which indicates that the compound may be formed naturally(SRC).
Atmospheric Concentrations4-Methyl-2-pentanol was qualitatively detected in ambient air samples taken Nov 20, 1979 at the BFI Landfill in New Jersey(1). It was detected in ambient air during an air pollution peak at concn ranging from 0.9 to 7.0 ppbdate and location not specified(2).
Human Toxicity ExcerptsTHE LIQ MAY BE VERY SLIGHTLY IRRITATING TO SKIN & IS SLIGHTLY TOXIC WHEN INGESTED.... EYE IRRITATION WAS PRODUCED @ 50 PPM, ALTHOUGH ODOR WAS NOT OBJECTIONABLE @ THIS LEVEL.
LuftstandardsThis action promulgates standards of performance for equipment leaks of Volatile Organic Compounds (VOC) in the Synthetic Organic Chemical Manufacturing Industry (SOCMI). The intended effect of these standards is to require all newly constructed, modified, and reconstructed SOCMI process units to use the best demonstrated system of continuous emission reduction for equipment leaks of VOC, considering costs, non air quality health and environmental impact and energy requirements. Methyl isobutyl carbinol is produced, as an intermediate or final product, by process units covered under this subpart.
Berufliche Expositionsstufe (OEB)A
Arbeitsplatzgrenzwert (OEL)TWA: 25 ppm (100 mg/m3), STEL: 40 ppm (165 mg/m3) [skin]
Wassergefährdungsklasse (WGK)1
Sofort lebensgefährliche Konzentration400 ppm
TSCA-Inventar-StatusTSCA listed
UN-TransportnummerUN 2053
Zollcode29051900
RTECS-Nr.SA7350000
R-Sätze (R)10-37-36/37/38
ToxizitätLD50 orally in Rabbit: 2590 mg/kg LD50 dermal Rabbit 2884 mg/kg
GefahrensymboleXi
Sicherheitshinweise (S)24/25-26
Gefahrenklasse3Eye Irrit. 2Flam. Liq. 3STOT SE 3
VerpackungsgruppeIII
Lagerklasse3 - Flammable liquids
Gefahrstoffdaten108-11-2(Hazardous Substances Data)
Selbstentzündungstemperatur305 °C

Anwendungen & Verwendung

Verwenden

(^+)-4-Methyl-2-pentanol is employed as a solvent in organic synthesis, dyes and stains, natural resins and waxes. It is an additive to surface coatings. It finds applications in the manufacture of lube oil additives, zinc dialkyldithiophosphate, brake fluids. It is the precursor to some plasticizers and frother in mineral flotation. It acts as a corrosion inhibitor and also utilized in the characterization of volatile fraction of mono varietal wines and tar sand mining processes.