Zurück
HuagongsheHuagongshe Chemie-Druckbericht · Nur für Forschungszwecke
HCID 7937Erstellt: 23. Oktober 2026

2,6-Dimethylpyridin

2,6-DIMETHYLPYRIDINE · 2,6-Lutidene · utidine · 2,6-Lutdeine · 2,6-Dimethypyridine · FEMA 3540 · 2,6-Lutidine 2,6-Dimethylpyridine · 26L

https://huagongshe.com/de/chemical/7937

Molekülstruktur von 2,6-Dimethylpyridin

Identifikatoren & physikalische Daten

CAS No.108-48-5
SummenformelC7H9N
Durchschnittliche Molmasse107,15 g/mol
Monoisotopische Masse107,07349929 g/mol
SMILESCc1cccc(C)n1
InChIKeyOISVCGZHLKNMSJ-UHFFFAOYSA-N
PubChem CID7937
ChEMBLCHEMBL22976
ChEBICHEBI:32548
EC No.203-587-3
DTXSIDDTXSID7051557
Lokaler Name2,6-Dimethylpyridin

Chemische & physikalische Eigenschaften

XLogP1,7
Polarare Oberfläche (TPSA)12,9
H-Brücken-Donoren0
H-Brücken-Akzeptoren1
Frei drehbare Bindungen0
Schwere Atome8
Formalladung0
Komplexität62,8
StoffklassenNitrogen Compounds -> Pyridines
SpringerMaterials Properties15N nuclear magnetic resonance spectrum
DuftstoffeFragrance Ingredient (2,6-Dimethylpyridine) -> IFRA transparency List
LogP (Verteilungskoeffizient)log Kow = 1.681.63
GeruchOdor of pyridine plus peppermint
LebensmittelzusatzstoffeFLAVORING AGENT OR ADJUVANT -> FDA Substance added to food
Dichte0.9252 @ 20 °C/4 °CDENSITY: 0.942 @ 0 °C/4 °C0.917-0.9230.9252 @ 20°C0.92 g/mL at 25 °C (lit.)
AromastoffeEU Flavoring substances
Color/FormOily liq
LöslichkeitSlightly soluble in ethanolsoluble in ethyl ether and acetoneSol in water (% wt/wt): 27.2% @ 45.3 °C18.1% @ 48.1 °C12.1% @ 57.5 °C9.5% @ 74.5 °Cmiscible with dimethylformamide and tetrahydrofuranIn water, 3.00X10+5 mg/l @ 34 °C300 mg/mL at 34 °CSoluble in waterSlightly soluble in fatSoluble (in ethanol)Chloroform (Soluble), Methanol (Slightly)40 g/100 mL (20 ºC)
Flammpunkt33 °C92 °F
Siedepunkt144 °C @ 760 mm Hg143.00 to 145.00 °C. @ 760.00 mm Hg143-145 °C144 °C @760 [mm Hg]143-145 °C (lit.)
Schmelzpunkt-6 °C (lit.)
Dampfdruck5.5 hPa (20 °C)
FEMA3540 | 2,6-DIMETHYLPYRIDINE
Brechungsindexn20/D 1.497(lit.)
Lagerbedingungen−20°C
AggregatzustandLiquid
pKa (Säurekonstante)6.65(at 25℃)
FarbeClear
Geruchat 1.00 % in dipropylene glycol. nutty amine woody bready cocoa oily
Geruchsartnutty
Biologische Quellesynthetic
Spezifische WärmekapazitätCp(liquid): 1.73 J/(g·K), at 25℃
JECFA Number1317
Merck14,5616
BRN105690
Henry-Konstante9.2×10-1 mol/(m3Pa) at 25℃, Brockbank (2013)
Dielektrizitätskonstante7.3300000000000001
StabilitätStable. Flammable. Incompatible with strong oxidizing agents, acid chlorides, acids, chloroformates. Protect from moisture.
Hauptanwendungenflavors and fragrances
InChI1S/C7H9N/c1-6-4-3-5-7(2)8-6/h3-5H,1-2H3
InChIKeyOISVCGZHLKNMSJ-UHFFFAOYSA-N
SMILESCc1cccc(C)n1
LogP (Verteilungskoeffizient)0.12 at 25℃
CAS Datenbank108-48-5(CAS DataBase Reference)
NIST chemische InformationenPyridine, 2,6-dimethyl-(108-48-5)
EPA chemische Informationen2,6-Dimethylpyridine (108-48-5)

Sicherheit & Vorschriften

GHS-EinstufungWarningH226 (100%): Flammable liquid and vapor [Warning Flammable liquids]P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P270, P271, P280, P301+P317, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P319, P321, P330, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)Aggregated GHS information provided per 338 reports by companies from 16 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.H226: Flammable liquid and vapor [Warning Flammable liquids]
Regulatorische InformationenChemical: Pyridine, 2,6-dimethyl-Commission Regulation (EC) No 1565/2000 (Repealed by Com. Implementing Reg. (EU) No 872/2012)Pyridine, 2,6-dimethyl- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Pyridine, 2,6-dimethyl- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)Status: Active Update: 28-10-2022 https://echa.europa.eu/registration-dossier/-/registered-dossier/33333Pyridine, 2,6-dimethyl-: HSNO Approval: HSR001389 Approved with controls
DOT-KennzeichnungCorrosive Flammable Liquid
BrandgefahrenExcerpt from ERG Guide 132 [Flammable Liquids - Corrosive]:
GesundheitsgefahrenExcerpt from ERG Guide 132 [Flammable Liquids - Corrosive]:
GefahrenübersichtEmergency treatment: PyridinePyridine is an irritant that causes CNS depression after ingestion of 1/2 cup or inhalation of 6-12 ppmIt can cause liver and kidney injury[HSDB] Safe when used as a flavoring agent in food[JECFA] An irritant[MSDSonline] See Pyridine.
Reaktive GruppeAmines, Phosphines, and Pyridines
Special ReportsREVIEW OF 2,6-DIMETHYLPYRIDINEHAZARDS, USES & RECOMMENDATIONS FOR STORAGE & HANDLING & MEDICAL TREATMENT IN CASE OF ACCIDENTS.[MOREL C ET ALCAH NOTES DOC 99: 319 (1980)]
Reactivity AlertsHighly Flammable
Reactivity ProfileLUTIDINE neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.
Air and Water ReactionsHighly flammable. Soluble in water.
Hazard Classes and CategoriesFlam. Liq. 3 (100%)Flammable liquids - Category 3
CSL Reaction InformationCSL00111WATER + Mercury(II) perchlorate hydrate + 2,6 lutidine + TETRAHYDROFURANExplosion tetrahydrofuran, water, 2,6 lutidine, and mercury perchlorate hydrateM (up to 100g)dithiane hydrolysisThe reaction chemicals were scaled up, but the amount of solvent was not scaled up to an equivalent proportion. The amount of material used in the reaction was approximately 20 times more concentrated than the quantity specified in the literature. Electronic software was used to calculate the quantities of all reactants but not the quantity of solvent. Additionally, the lesser amount of solvent used in this reaction made it difficult for the magnetic stirrer bar to effectively mix
BrandbekämpfungExcerpt from ERG Guide 132 [Flammable Liquids - Corrosive]:
Erste HilfeExcerpt from ERG Guide 132 [Flammable Liquids - Corrosive]:
Freisetung ohne BrandExcerpt from ERG Guide 132 [Flammable Liquids - Corrosive]:
EntsorgungsverfahrenSRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.
Isolation and EvacuationExcerpt from ERG Guide 132 [Flammable Liquids - Corrosive]:
Protective Action Criteria (PAC)3.1 [ppm]34 [ppm]200 [ppm]
Personal Protective Equipment (PPE)Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]:
UmweltverhaltenTERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 200(SRC), determined from a measured log Kow of 1.68(2) and a regression-derived equation(3), indicates that 2,6-lutidine is expected to have moderate mobility in soil(SRC). The pKa of 2,6-lutidine is 6.6(4), which indicates that 2,6-lutidine will partially exist in the protonated form in moist soils and cations adsorb to soil surfaces more strongly than neutral compounds(SRC). Volatilization of the neutral species of 2,6-lutidine from moist soil surfaces is expected to be an important fate process(SRC) given a Henry's Law constant of 1.04X10-5 atm-cu m/mole(5), but the protonated form will not volatilize. The potential for volatilization of 2,6-lutidine from dry soil surfaces may exist based upon a vapor pressure of 5.65 mm Hg(6). 2,6-Lutidine biodegrades in soils under aerobic conditions(7). The half-life of 2,6-lutidine was approximately 1 month in an unpolluted surface soil under aerobic conditions with 100% degradation observed after 3 months(7) in a second, 2,6-lutadine was completely degraded in 32 days(8). Little degradation was observed under denitrifying and sulfate-reducing conditions(7).AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 200(SRC), determined from a measured log Kow of 1.68 (2) and a regression-derived equation(3), indicates that 2,6-lutidine is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon a Henry's Law constant of 1.04X10-5 atm-cu m/mole(4). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 2 and 31 days, respectively(SRC). The pKa of 2,6-lutidine is 6.6(5), which indicates that 2,6-lutidine will partially exist in the protonated form in water and cations will not volatilize(SRC). According to a classification scheme(6), an estimated BCF of 4(SRC), from its log Kow(2) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low(SRC). 2,6-Lutidine was shown to biodegrade under aerobic conditions in soil (especially polluted soil), but the rate of degradation was slower under anaerobic conditions(8)similar biodegradation in water is expected. 2,6-Lutidine was degraded approximately 30% over the course of a 35 day incubation period in column experiments using contaminated groundwater from a coal tar producing chemical facility as inoculum(9).ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 2,6-lutidine, which has a vapor pressure of 5.65 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 2,6-lutidine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC)the half-life for this reaction in air is estimated to be 6 days(SRC), calculated from its rate constant of 2.8X10-12 cu cm/molecule-sec at 25 °C (SRC) determined using a structure estimation method(3).
Lebensmitteluntersuchungswerte2,6-Lutidine was identified, not quantified, in boiled beef(1) and roasted filberts(2).
Unerwünschte WirkungenNeurotoxin - Other CNS neurotoxin
Effluent Concentrations2,6-Lutidine was detected in oil shale retort water in Australia at a concn of 3 mg/l(1). Effluent from a municipal treatment plant in Hamilton, Ontario released 2,6-lutidine at a rate of 0.42 kg/day(2). Unspecified isomers of lutidine were detected in feedwater and permeate water from an abandoned creosote manufacturing plant in Pensacola, FL at concns of 2.48 and 0.032 mg/l, respectively(3).
Soil Adsorption/MobilityThe Koc of 2,6-lutidine is estimated as 200(SRC), using a measured log Kow of 1.68(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that 2,6-lutidine is expected to have moderate mobility in soil. The pKa of 2,6-lutidine is 6.6(4), which indicates that 2,6-lutidine will partially exist in the protonated form in moist soils and cations adsorb to soil surfaces more strongly than neutral compounds(SRC).
Artificial Pollution Sources2,6-Lutidine's production and use as a chemical intermediate in the production of pharmaceuticals, resins, dyestuffs, rubber accelerators and insecticides(1) may result in its release to the environment through various waste streams(SRC).
Environmental BiodegradationAn initial concn of 214 ppm 2,6-lutidine incubated in a Fincastle silt loam, was degraded 19, 22.2, 29.5, 42.4, 57.9 and 100% after 1, 2, 4, 8, 16 and 32 days, respectively(1). Mixed cultures isolated from a polluted soil were shown to degrade 2,6-lutidine(2). The half-life of 2,6-lutidine was approximately 1 month in an unpolluted surface soil under aerobic conditions with 100% degradation observed after 3 months, while little degradation was observed under denitrifying and sulfate reducing conditions(3). The half-life was about 0.5 months in polluted surface and subsurface soils with 100% degradation observed after 1 month(3). 2,6-Lutidine was degraded approximately 30% during a 35 day incubation period in column experiments using contaminated groundwater from a coal tar producing chemical facility as inoculum(4). The half-life of 2,6-lutidine in polluted subsurface sediments was 6 days(4).
Sediment/Soil Concentrations2,6-Lutidine was identified, not quantified, in soil from Moscow, Russia(1).
Environmental BioconcentrationAn estimated BCF of 4 was calculated for 2,6-lutidine(SRC), using a log Kow of 1.68(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).
Volatilization from Water/SoilThe Henry's Law constant for 2,6-lutidine is 1.04X10-5 atm-cu m/mole(1). This Henry's Law constant indicates that 2,6-lutidine is expected to volatilize from water surfaces(2). Based on this Henry's Law constant, the volatilization half-life from a model river (1 m deep, flowing 1 m/sec, wind velocity of 3 m/sec)(2) is estimated as 2 days (SRC). The volatilization half-life from a model lake (1 m deep, flowing 0.05 m/sec, wind velocity of 0.5 m/sec)(2) is estimated as 31 days(SRC). 2,6-Lutidine's Henry's Law constant(1) indicates that volatilization from moist soil surfaces may occur(SRC). The pKa of 2,6-lutidine is 6.6(3), which indicates that 2,6-lutidine will partially exist in the protonated form in water and moist soils and cations will not volatilize(SRC). 2,6-Lutidine may volatilize from dry soil surfaces(SRC) based on its vapor pressure of 5.65 mm Hg at 25 °C(4).
Non-Human Toxicity Excerpts...LUTIDINES...CAUSE SYMPTOMS RESEMBLING THOSE OBSERVED WITH PYRIDINE. THESE ARE LARGELY NONSPECIFIC & INCLUDE WEAKNESS, ATAXIA, DIARRHEA, & UNCONSCIOUSNESS. ... MAJORITY OF DERIV...ARE PRIMARY IRRITANTS & PENETRATE INTACT GUINEA PIG SKIN READILY. ... CAUSE...INTENSE SKIN & EYE IRRITATION. /PYRIDINE DERIVATIVES/INHALATION OF 7500 PPM CONCN VAPOR OF 2,6-LUTIDINE BY RATS CAUSED 100% MORTALITY IN 1.2 HR.IN DOGS WITH A UREA LOAD, IV ADMIN OF 2,6-LUTIDINE MARKEDLY INCR URINE VOL & UREA CLEARANCE.
Environmental Abiotic DegradationThe rate constant for the vapor-phase reaction of 2,6-lutidine with photochemically-produced hydroxyl radicals has been estimated as 2.8X10-12 cu cm/molecule-sec at 25 °C(SRC) using a structure estimation method(1). This corresponds to an atmospheric half-life of about 6 days at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(1). The pKa of 2,6-lutidine is 6.6(2), which indicates that 2,6-lutidine will partially exist in the protonated form in the environment(SRC). Analogous 3,5-lutidine has a weak absorption band that extends into the environmental UV spectrum(3), which suggests that direct photolysis is not likely to occur for alkylated pyridines(SRC).
F8
Wassergefährdungsklasse (WGK)3
TSCA-Inventar-StatusTSCA listed
UN-TransportnummerUN 1993 3/PG 3
Zollcode29333999
RTECS-Nr.OK9700000
R-Sätze (R)10-22-36/37/38-20/21/22
ToxizitätLD50 orally in Rabbit: 400 mg/kg LD50 dermal Rabbit > 1000 mg/kg
GefahrensymboleXn,F,Xi
hazard_noteIrritant/Flammable
Sicherheitshinweise (S)26-36/37-16-36-36/37/39
Gefahrenklasse3Acute Tox. 4 OralEye Irrit. 2Flam. Liq. 3Skin Irrit. 2
VerpackungsgruppeIII
Lagerklasse3 - Flammable liquids
Gefahrstoffdaten108-48-5(Hazardous Substances Data)

Anwendungen & Verwendung

Occurrence

Reported found in bread, tea, peppermint oil, cheeses, chicken, beef, pork, beer, sherry, whiskies, cocoa, coffee, tea, oatmeal, rice bran, buckwheat and malt.

Verwenden

2,6-Lutidine is used as a solvent in organic synthesis and as a sterically hindered mild base. It is also used as a vulcanization accelerator for dyes, resins and rubber. It also acts as a food additive.