HuagongsheHuagongshe Chemie-Druckbericht · Nur für Forschungszwecke
Bis(2-butoxyethyl) phthalate
DBEP · Kronisol · NSC 4840 · palatinolk · Kesscoflex · Palatinol K · Staflex DBEP · Plasthall 200

Identifikatoren & physikalische Daten
| CAS No. | 117-83-9 |
|---|---|
| Summenformel | C20H30O6 |
| Durchschnittliche Molmasse | 366,4 g/mol |
| Monoisotopische Masse | 366,20423868 g/mol |
| SMILES | CCCCOCCOC(=O)c1ccccc1C(=O)OCCOCCCC |
| InChIKey | CMCJNODIWQEOAI-UHFFFAOYSA-N |
| PubChem CID | 8345 |
| ChEMBL | CHEMBL3182679 |
| ChEBI | CHEBI:79937 |
| EC No. | 204-213-1 |
| DTXSID | DTXSID9047174 |
Chemische & physikalische Eigenschaften
| XLogP | 4,4 |
|---|---|
| Polarare Oberfläche (TPSA) | 71,1 |
| H-Brücken-Donoren | 0 |
| H-Brücken-Akzeptoren | 6 |
| Frei drehbare Bindungen | 16 |
| Schwere Atome | 26 |
| Formalladung | 0 |
| Komplexität | 348 |
| Polymers | Plastics & Rubber -> Phthalate Esters |
| Dichte | 1.06 at 20 °C |
| Viscosity | 42 mPa sec at 20 °C. |
| Color/Form | Colorless liquid |
| Löslichkeit | Phthalate esters are soluble to various extents in many common organic solvents and oils, but have a relatively low solubility in water. /Phthalate esters/Soluble in organic solventsIn water, 300 mg/L, temp not specifiedChloroform (Slightly), Methanol (Slightly)<0.3g/L(20 ºC) |
| Flammpunkt | 407 °F208 °C (CLOSED CUP)407 °F (208 °C) (Open cup)205 °C |
| Endocrine Disruptors | Potential endocrine disrupting compound |
| Siedepunkt | 270 °C270 °C / 22mmHg |
| Decomposition | When heated to decomposition it emits acrid smoke and irritating fumes. |
| Schmelzpunkt | FP: -55 °C-54.9°C |
| Dampfdruck | 0.00217 [mmHg] |
| Brechungsindex | Refractive index = 1.486 at 20 °C/D.n20/D 1.486(lit.) |
| Lagerbedingungen | Refrigerator |
| Aggregatzustand | Oil |
| Farbe | Colourless |
| Henry-Konstante | 4.9×106 mol/(m3Pa) at 25℃, HSDB (2015) |
| LogP (Verteilungskoeffizient) | 4.520 (est) |
| CAS Datenbank | 117-83-9(CAS DataBase Reference) |
| EPA chemische Informationen | Bis(2-butoxyethyl) phthalate (117-83-9) |
Sicherheit & Vorschriften
| GHS-Einstufung | This chemical does not meet GHS hazard criteria for 98.3% (114 of 116) of all reports.Not ClassifiedAggregated GHS information provided per 116 reports by companies from 3 notifications to the ECHA C&L Inventory. |
|---|---|
| Regulatorische Informationen | Chemical: 1,2-Benzenedicarboxylic acid, bis(2-butoxyethyl) ester1,2-Benzenedicarboxylic acid, bis(2-butoxyethyl) ester: Does not have an individual approval but may be used as a component in a product covered by a group standard. It is not approved for use as a chemical in its own right. |
| Brandpotenzial | Combustible |
| Gefahrenübersicht | Like dioctyl phthalate, it may cause CNS depression and mild liver toxicity after ingestion of large amounts[HSDB] May cause irritation[MSDSonline] See PHTHALATE ESTERS. |
| FDA-Anforderungen | Di(butoxyethyl) phthalate is an indirect food additive for use only as a component of adhesives. |
| Special Reports | Nat'l Research Council CanadaPhthalate Esters in the Aquatic Environment (1980) NRCC No. 17583USEPAAmbient Water Quality Criteria Doc: Phthalate Esters (1980) EPA 440/5-80-067Woodward KN (ed)Phthalate Esters: Toxicity and Metabolism (1988)Environ Health Perspect 45: 1-210 (1982)For more Special Reports (Complete) data for BIS(2-BUTOXYETHYL) PHTHALATE (6 total), please visit the HSDB record page. |
| NFPA Hazard Classification | 1 - Materials that, under emergency conditions, can cause significant irritation.1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur.0 - Materials that in themselves are normally stable, even under fire conditions. |
| Peroxide Forming Chemical | Bis(2-n-butoxyethyl) phthalateD: Other compounds that may form peroxidesKelly |
Anwendungen & Verwendung
Verwenden
It is used as a plasticizer for polyvinyl chloride, polyvinyl acetate, and other resins.