Zurück
HuagongsheHuagongshe Chemie-Druckbericht · Nur für Forschungszwecke
HCID 8554Erstellt: 24. Oktober 2026

Dimethyl Phthalate

DMP · MIPAX · PHTHALIC ACID DIMETHYL ESTER · MICROCARE DMP · NTM · METHYL PHTHALATE · 1,2-dimethyl phthalate · Avolin

https://huagongshe.com/de/chemical/8554

Molekülstruktur von Dimethyl Phthalate

Identifikatoren & physikalische Daten

CAS No.131-11-3
SummenformelC10H10O4
Durchschnittliche Molmasse194,18 g/mol
Monoisotopische Masse194,0579088 g/mol
SMILESCOC(=O)c1ccccc1C(=O)OC
InChIKeyNIQCNGHVCWTJSM-UHFFFAOYSA-N
PubChem CID8554
ChEMBLCHEMBL323348
ChEBICHEBI:4609
EC No.205-011-6
DTXSIDDTXSID3022455
Lokaler NameDimethylphthalat

Chemische & physikalische Eigenschaften

XLogP1,6
Polarare Oberfläche (TPSA)52,6
H-Brücken-Donoren0
H-Brücken-Akzeptoren4
Frei drehbare Bindungen4
Schwere Atome14
Formalladung0
Komplexität200
StoffklassenHazardous Air Pollutants (HAPs)PhthalateSemi-Volatile Organic Compound (SVOC)
PolymersPlastics & Rubber -> Phthalate Esters
KosmetikaCosmetics ingredient -> Other (Specify)Cosmetic ingredients (Dimethyl Phthalate) -> CIR (Cosmetic Ingredient Review)Film formingSolventPlasticiser
SpringerMaterials PropertiesBoiling point
DuftstoffeFragrance Ingredient (Dimethyl phthalate) -> IFRA transparency List
PestizidePesticide -> EPA IRIS
LogP (Verteilungskoeffizient)log Kow = 1.601.47/2.12
GeruchSlight aromatic odor
Dichte1.1905 at 68 °F (USCG, 1999) - Denser than waterwill sink1.196 at 15.6 °C/15.6 °C1.1940 at 20 °C/20 °C1.189 at 25 °C/25 °CBulk density 9.93 lb/gal at 68 °F.Relative density (water = 1): 1.191.1905 @ 20°C1.19 g/mL at 25 °C (lit.)
Viscosity17.2 cP at 25 °C
Color/FormPale yellowColorless, oily liquid [Note: A solid below 42 degrees F]
Löslichkeitless than 1 mg/mL at 68 °F (NTP, 1992)In water, 4,000 mg/L at 25 °CMiscible with alcohol, ether, chloroform. Practically insoluble in petroleum ether, and other paraffin hydrocarbons.Solubility in mineral oil at 20 °C: 0.34 g/100 gMiscible with ethanol, ethyl ethersoluble in benzeneslightly soluble in carbon tetrachlorideReadily soluble in organic solvents, alcohols, esters, ketones, chlorinated hydrocarbons. Slightly soluble in some types of mineral oil.4.0g/l<0.1 g/100 mL at 20 ºC
Schmelzpunkt2 °C (lit.)
Siedepunkt282 °C (lit.)
Dampfdruck0.008 hPa (20 °C)
Brechungsindexn20/D 1.515(lit.)
Flammpunkt295 °F
LagerbedingungenStore below +30°C.
AggregatzustandLiquid
FarbeClear
Wichte1.194 (20/4℃)
Geruchsl. aromatic odor
pH7 (H2O, 20℃)
Biologische Quellesynthetic
Spezifische WärmekapazitätCp(liquid): 1.56 J/(g·K), at 25℃
Merck14,3255
BRN1911460
Henry-KonstanteAt 25 °C: 235, 246, 230, 214, 168, 127, and 118 at pH values of 3.00, 3.37, 5.88, 6.18, 7.62, 8.91, and 8.99, respectively (Hakuta et al., 1977).
Dielektrizitätskonstante8.1(45℃)
StabilitätStable. Combustible. Incompatible with strong oxidizing agents, strong acids, strong bases, nitrates. Sensitive to prolonged exposure to light.
Hauptanwendungenflavors and fragrances
Kosmetik-Inhaltsstoffe FunktionenSOLVENTPLASTICISERFILM FORMINGFRAGRANCE
InChI1S/C10H10O4/c1-13-9(11)7-5-3-4-6-8(7)10(12)14-2/h3-6H,1-2H3
InChIKeyNIQCNGHVCWTJSM-UHFFFAOYSA-N
SMILESCOC(=O)c1ccccc1C(=O)OC
LogP (Verteilungskoeffizient)1.54 at 25℃
CAS Datenbank131-11-3(CAS DataBase Reference)
NIST chemische InformationenDimethyl phthalate(131-11-3)
EPA chemische InformationenDimethyl phthalate (131-11-3)

Sicherheit & Vorschriften

GHS-EinstufungDangerH242: Heating may cause a fire [Danger Self-reactive substances and mixturesOrganic peroxides]P210, P234, P235, P240, P260, P261, P264, P270, P272, P273, P280, P301+P317, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P321, P330, P333+P317, P362+P364, P363, P370+P378, P391, P403, P405, P410, P411, P420, and P501 (click each P-code to see the statement)This chemical does not meet GHS hazard criteria for 95.7% (1993 of 2082) of all reports.Not ClassifiedAggregated GHS information provided per 2082 reports by companies from 15 notifications to the ECHA C&L Inventory.
Regulatorische InformationenChemical: 1,2-Benzenedicarboxylic acid, 1,2-dimethyl esterHazard Traits - Developmental ToxicityEndocrine ToxicityEnvironmental toxImmunotoxicityOcular ToxicityReproductive ToxicityRespiratory ToxicityRegulation (EC) No 178/2002 (amended)1,2-Benzenedicarboxylic acid, 1,2-dimethyl ester is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 1,2-Benzenedicarboxylic acid, 1,2-dimethyl ester are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)Status: Active Update: 06-04-2023 https://echa.europa.eu/registration-dossier/-/registered-dossier/14997Dimethylphthalate: Does not have an individual approval but may be used under an appropriate group standard
Weitere SicherheitsinformationenIMAP assessments - 1,2-Benzenedicarboxylic acid, dimethyl ester: Human health tier I assessment
DOT-KennzeichnungClass 9
BrandgefahrenThis chemical is combustible. (NTP, 1992)
BrandpotenzialCombustible.
GesundheitsgefahrenSymptoms unlikely from any exposure. (USCG, 1999)
GefahrenübersichtDimethyl phthalate has many uses, including in solid rocket propellants, plastics, and insect repellants. Acute (short-term) exposure to dimethyl phthalate, via inhalation in humans and animals, results in irritation of the eyes, nose, and throat. No information is available on the chronic (long-term), reproductive, developmental, or carcinogenic effects of dimethyl phthalate in humans. Animal studies have reported slight effects on growth and on the kidney from chronic oral exposure to the chemical. EPA has classified dimethyl phthalate as a Group D, not classifiable as to human carcinogencity.Ingestion can cause central nervous system depression. Used as a mosquito repellant during World War II, no skin sensitization was reported. DMP is a possible animal teratogen. [ACGIH] In high-dose reproductive studies of rats and mice, DEHP and other phthalates cause testicular damage to males and increased fetal losses and malformations to pregnant females. [Frazier, p. 350-2] The abstract to the article Occupational contact dermatitis caused by computer mice can be found in NIOSHTIC # 202472. One worker was patch test positive to dimethylphthalate and one to diethyl phthalate. [Reference #1] Not irritating to the skin based on human and animal information[CHEMINFO] No listed effects of short-term or long-term exposure[ICSC]The major hazards encountered in the use and handling of dimethylphthalate stem from its toxicologic properties. Toxic by all routes (ie, inhalation, ingestion, dermal contact), exposure to this colorless, oily liquid (or pale-yellow crystals at temperatures below 42 °F) may occur from its use as a plasticizer or solvent. Effects from exposure may include contact burns to the skin and eyes, confusion, ataxia, clonic jerking, coma, seizures, and possibly death. Both the OSHA PEL and the ACGIH TLV have been set at 5 mg/cu m. While its vapor pressure is low (< 0.01 mm Hg at 20 °C), levels of aerosolized dimethylphthalate should be maintained below the PEL through ventilation. In activities where over-exposure may occur, wear a self-contained breathing apparatus with a full facepiece, and protective clothing to prevent skin contact. If contact should occur, immediately flush eyes with running water for at least 15 minutes, and wash affected skin with soap and water. While dimethylphthalate does not ignite easily (flashpoint: 295 °F), it may burn with the production of irritating and poisonous gases. Fire involving dimethylphthalate may be extinguished with dry chemical, CO2, or Halon. Water spray, fog, or standard foam, if used, should be applied with caution, as each may cause violent frothing. Dimethylphthalate should be stored away from nitrates, strong oxidizers, alkalies and acids. Before shipping dimethylphthalate, consult with the regulatory requirements of the US Department of Transportation. Small dry spills of dimethylphthalate should be carefully shovelled into a clean, dry, covered container (liquid spills are first absorbed in sand or other noncombustible material) for later disposal. Large liquid spills should be diked (powder spills covered with plastic sheeting) for later disposal. Before implementing land disposal of waste dimethylphthalate, consult with environmental regulatory agencies for guidance. Also, dimethylphthalate is a good candidate for liquid injection and fluidized bed forms of incineration.
FDA-AnforderungenDimethyl phthalate is an indirect food additive for use only as a component of adhesives.
Reaktive GruppeEsters, Sulfate Esters, Phosphate Esters, Thiophosphate Esters, and Borate Esters
Special ReportsEuropean Chemicals BureauIUCLID Dataset, Dimethyl phthalate (131-11-3), 162 pp. (2000 CD-ROM edition). Contains information on use, toxicology, and environmental effects of this chemical as supplied to the European Union by industry.[Available from, as of April 24, 2008: http://esis.jrc.ec.europa.eu/]Autian JToxicity and health threats of phthalate esters: review of the literatureEnviron Health Perspect 4: 3-26 (1973). Topics discussed include: chemistry & propertiesgeneral applications, both industrial & consumerindustrial health problems, occupational toxicityacute, subacute & chronic toxicity of dimethyl phthalateabsorption, distribution, excretion and metabolismteratogenic, mutagenic, & carcinogenic effectscellular toxicity (effect on mouse fibroblasts & human blood formed elements)use in construction of medical devicesenvironmental problems & human health threats. In general the phthalate esters have a very low degree of acute toxicity to animals & man.USEPAAmbient Water Quality Criteria Doc: Phthalate Esters (1980) EPA 440/5-80-067Thomas JA, Thomas MJBiological Effects of Di-2-Ethylhexyl Phthalate and Other Phthalic-Acid Esters, Crit Rev Toxicol 13 (4): 283-318 (1984)For more Special Reports (Complete) data for DIMETHYL PHTHALATE (8 total), please visit the HSDB record page.
RCRA-AnforderungenU102As stipulated in 40 CFR 261.33, when dimethyl phthalate, as a commercial chemical product or manufacturing chemical intermediate or an off-specification commercial chemical product or a manufacturing chemical intermediate, becomes a waste, it must be managed according to Federal and/or State hazardous waste regulations. Also defined as a hazardous waste is any residue, contaminated soil, water, or other debris resulting from the cleanup of a spill, into water or on dry land, of this waste. Generators of small quantities of this waste may qualify for partial exclusion from hazardous waste regulations (40 CFR 261.5).
TSCA-AnforderungenPursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. 1,2-Benzenedicarboxylic acid, dimethyl ester is included on this list. Effective date 10/04/82Sunset date 10/04/92.A testing consent order is in effect for dimethyl phthalate for environmental effects testing. FR citation: 1/9/89.
BrandbekämpfungExcerpt from ERG Guide 171 [Substances (Low to Moderate Hazard)]:Use water spray, foam, powder, carbon dioxide.
Erste-Hilfe-MaßnahmenFresh air, rest.Rinse and then wash skin with water and soap.First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.Rinse mouth.
Erste HilfeEYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.(General first aid procedures)
Sichere LagerungStore in an area without drain or sewer access.
Firefighting HazardsCarbon oxides
BrandbekämpfungsverfahrenWater or foam may cause frothing.Extinguishant: Dry chemical, foam, or carbon dioxideDepending upon the concentration of dimethylphthalate, the following respiratory protection information is provided: Fire fighting: Self-contained breathing apparatus with a full facepiece operated in pressure demand or other positive pressure mode.If material on fire or involved in fire: Do not extinguish fire unless flow can be stopped. Use water in flooding quantities as fog. Solid streams of water may spread fire. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use foam, dry chemical, or carbon dioxide.For more Fire Fighting Procedures (Complete) data for DIMETHYL PHTHALATE (6 total), please visit the HSDB record page.
LagerbedingungenKeep container tightly closed in a dry and well-ventilated place.
ReinigungsverfahrenThis study investigated the feasibility of using ozone-GAC process to remove phthalate esters from drinking water through a batch-scale study and adsorption isotherms. Dimethyl phthalate (DMP), diethyl phthalate (DEP) and dibutyl phthalate (DBP) were selected as the representative of phthalate esters. Results indicated that ozonation removes more than 40% DMP, DEP and DBP, GAC absorbed all the DMP, DEP and DBP that had not been oxidized by ozone at the condition of the Empty Bed Contact Time (EBCT) from 4 minutes to 12 minutes. The isotherms for GAC were successful correlated by Freundlich equation, and the date was used to estimate GAC service time. The results indicated that ozone-GAC process is a feasible way to remove DMP, DEP and DBP from drinking water.1. Remove all ignition sources. 2. Ventilate area of spill or leak. 3. For small quantities, abosrb on paper towels, evaporate in safe place (such as fume hood), allow sufficient time for evaporating vapors to completely clear hood ductwork.Accidental Release Measures. Personal precautions, protective equipment and emergency procedures: Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Methods and materials for containment and cleaning up: Keep in suitable, closed containers for disposal.
Freisetung ohne BrandExcerpt from ERG Guide 171 [Substances (Low to Moderate Hazard)]:
EntsorgungsverfahrenGenerators of waste (equal to or greater than 100 kg/mo) containing this contaminant, EPA hazardous waste number U102, must conform with USEPA regulations in storage, transportation, treatment and disposal of waste./Small quantities/ absorb with paper, then burn the paper in a suitable location away from other combustible materials.A good candidate for rotary kiln incineration at a temperature range of 820 to 1,600 °C and residence times of seconds for liquids and gases, and hours for solids. A good candidate for liquid injection incineration at a temperature range of 650 to 1,600 °C and a residence time of 0.1 to 2 seconds. A good candidate for fluidized bed incineration at a temperature range of 450 to 980 °C and residence times of seconds for liquids and gases, and longer for solids.Chemical Treatability of Dimethyl PhthalateConcentration Process: Resin AdsorptionChemical Classification: PhthalatesScale of Study: Batch flow, Laboratory scaleType of Wastewater Used: Pure compound (one solute in a solvent)Results of Study: 100% reduction62% desorbed from resin by elutriation with solvent. (Amberlite XAD-2 used. Solvents included pentane-acetone, diethyl ether, methylene chloride-acetone, chloroform-acetone).For more Disposal Methods (Complete) data for DIMETHYL PHTHALATE (9 total), please visit the HSDB record page.
Verschüttetes entsorgenDo NOT let this chemical enter the environment. Collect leaking liquid in sealable containers. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
Preventive MeasuresSRP: The scientific literature for the use of contact lenses by industrial workers is inconsistent. The benefits or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.SRP: Local exhaust ventilation should be applied wherever there is an incidence of point source emissions or dispersion of regulated contaminants in the work area. Ventilation control of the contaminant as close to its point of generation is both the most economical and safest method to minimize personnel exposure to airborne contaminants. Ensure that the local ventilation moves the contaminant away from the worker.SRP: Contaminated protective clothing should be segregated in a manner such that there is no direct personal contact by personnel who handle, dispose, or clean the clothing. The completeness of the cleaning procedures should be considered before the decontaminated protective clothing is returned for reuse by the workers. Contaminated clothing should not be taken home at the end of shift, but should remain at employee's place of work for cleaning.Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
KörperbelastungDimethyl phthalate was identified in a human atherosclerotic aorta at a concentration of 40 ppb(1). The degradation product of dimethyl phthalate, monomethyl phthalate, was detected in the serum of 484 of 501 female and 478 of 502 male seniors from Uppsala, Sweden at a maximum of 46.2 and 51.9 mg/mL, respectively(2). The median concentration of monomethyl phthalate in urine samples from 36 Japanese people collected May to June 2004 was 33 ug/Lthis translates to an exposure rate of 1.4-2.0 ug/kg/day of the parent compound dimethyl phthalate(3).
Wechselwirkungen... Mice were epicutaneously sensitized with fluorescein isothiocyanate (FITC) dissolved in acetone containing a phthalate ester. Sensitization was evaluated as ear swelling after a challenge with FITC. Draining lymph node cells obtained 24 hr after skin sensitization were examined for FITC fluorescence by means of flow cytometry. FITC-positive cells were characterized with anti-CD11c and anti-CD11b by three-color flow cytometry. ... When mice were sensitized with FITC in acetone containing di-butyl phthalate (DBP) or di-n-propyl phthalate (DPP), strong enhancement of the ear-swelling response was observed. Di-methyl phthalate (DMP) and di-ethyl phthalate (DEP) were less effective but produced some enhancement. ...
ZielorganeEyes, respiratory system, gastrointestinal tract
Gesundheitliche AuswirkungenPhthalate esters are endocrine disruptors. Animal studies have shown that they disrupt reproductive development and can cause a number of malformations in affected young, such as reduced anogenital distance (AGD), cryptorchidism, hypospadias, and reduced fertility. The combination of effects associated with phthalates is called 'phthalate syndrome’. (A2883)
ÖkotoxizitätswerteLC50Species: Allolobophora tuberculata (Earthworm) adultmultiple environmental routes of exposure 773 (376-1591) ug/sq cm for 48 hrSpecies: Eisenia fetida (Earthworm) adultmultiple environmental routes of exposure 550 (440-690) ug/sq cm for 48 hrdirect application 3335 (2124-5235) mg/kg for 48 hrartificial soildirect application 3160 (2450-3820) mg/kg for 48 hrFor more Ecotoxicity Values (Complete) data for DIMETHYL PHTHALATE (43 total), please visit the HSDB record page.
UmweltverhaltenTERRESTRIAL FATE: Based on a classification scheme(1), Koc values of 55-360(2-4), indicate that dimethyl phthalate is expected to have high to moderate mobility in soil(SRC). Volatilization of dimethyl phthalate from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 2.0X10-7 atm-cu m/mole(SRC), based upon its vapor pressure, 3.08X10-3 mm Hg(5), and water solubility, 4000 mg/L(6). Dimethyl phthalate is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(5). Biodegradation half-lives in contaminated soil ranging from 15 to 123 days(7) suggest that biodegradation is dependent on prior exposure and subsequent acclimation(SRC).AQUATIC FATE: Based on a classification scheme(1), a log Koc value of >5.2 measured in suspended solids(2), indicates that dimethyl phthalate is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 2.0X10-7 atm-cu m/mole(SRC), derived from its vapor pressure, 3.08X10-3 mm Hg(4), and water solubility, 4000 mg/L(5). The hydrolysis half-life of dimethyl phthalate is estimated to be 3.2 yr under neutral conditions at 30 °C(6). However, at pH 9, the estimated half-lives are 11.6 and 25 days at 30 and 18 °C, respectively(7). According to a classification scheme(8), BCFs of 5.4 in sheepshead minnows(9) and 57 in bluegill sunfish(10), suggest bioconcentration in aquatic organisms is low to moderate(SRC). Biodegradation half-lives have been reported as 1-5 days in water/sediment environments and 2-12 days in water(11). Other studies saw complete removal of dimethyl phthalate in 8-11 days in river water, but only 20-32% degradation in seawater in 2 weeks(12). These studies indicate that biodegradation will occur(SRC). The half-life for direct photolysis in surface waters is estimated at 3500 hrs(13), in pure water, its half-life was 12.7 hr(14).ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), dimethyl phthalate, which has a vapor pressure of 3.08X10-3 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase dimethyl phthalate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC)the half-life for this reaction in air is estimated to be 28 days(SRC), calculated from its rate constant of 5.7X10-13 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Dimethyl phthalate contains chromophores that absorb at wavelengths >290 nm(4) and, therefore, may be susceptible to direct photolysis by sunlight(SRC).
LebensmitteluntersuchungswerteDimethyl phthalate was analyzed for but not detected in 50 vodka and flavored vodka samples and 7 grain neutral spirits contained in plastic(1). Food samples collected over four days from a university restaurant, Paris, France contained dimethyl phthalate at detected, 17.3, 2.8, 21.1 and 12.6 ng/g wet weight in mixed salad, granny apple, black grapes, stewed apples and fruit salad, respectively(2). Dimethyl phthalate was not detected (detection limit 2 ng/g wet weight) in fish terrine, corn salad, radishes, lasagne, roast beef, chicken leg, mixed steak, basmati rice, fried vegetables, fried potatoes, plain yogurt, Gruyere cheese and Camembert cheese(2).
Unerwünschte WirkungenReproductive Toxin - A chemical that is toxic to the reproductive system, including defects in the progeny and injury to male or female reproductive function. Reproductive toxicity includes developmental effects. See Guidelines for Reproductive Toxicity Risk Assessment.
Expositionspfadeinhalation, ingestion, skin and/or eye contactOral (L1903)inhalation (L1903)dermal (L1903)
ToxizitätsübersichtSafe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.orgIDENTIFICATION AND USE: Dimethyl phthalate (DMP) is a pale yellow, or colorless, oily liquid (solid below 42 °F) with slight aromatic odor. It is used as plasticizer for nitrocellulose and cellulose acetate, resins, and in solid rocket propellantslacquersplasticsrubbercoating agentssafety glassand molding powders. Formerly it was used as a repellant for flies on horses and cows, and as a leech repellant. DMP is not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses. HUMAN EXPOSURE AND TOXICITY: In man, dimethyl phthalate has caused skin irritation reactions and skin sensitization was induced in one individual. Repeated inhalation of the vapor irritated the nose and upper respiratory tract. If swallowed, DMP may cause irritation of the stomach, dizziness, and unconsciousness. In one fatal case of suicidal ingestion of a mixture containing dimethyl phthalate and ketone peroxides, the principal toxic symptoms were marked esophagitis, gastritis, and hemorrhage. Mortality of human sperm in vitro was reduced by 25% in cultures containing 0.4 mM DMP for 18 hr. Chromosomal damage was not induced in human white blood cells. DMP is not a known human carcinogen. ANIMAL STUDIES: DMP caused irritation and ulceration when repeatedly applied to mouse skin, but in rabbits it produced only weak skin and eye effects. Acute oral and dermal toxicity in a number of animal species was low. Oral studies in rats indicated repeated exposure may produce kidney damage and mild effects on the liver. Kidney and liver injury was seen in rabbits on repeated skin contact with DMP. By inhalation, severe mucous membrane irritation was observed in cats exposed at 250 ppm, and at 1250 ppm, animals appeared depressed. In mice inhaling 0.7-1.8 mg/cu m DMP (4 hr/day) for 4 mo, changes in the frequency of respiration, function of the nervous system, liver, and kidneys, and blood morphology were observed. Testosterone in testis and in serum and dihydrotestosterone in serum were significantly decreased in rats fed diets containing 2% dimethylphthalate for 1 week. The offspring of mice and rats treated orally or dermally were normal, whereas fetal deaths and malformations were seen when pregnant rats were given intraperitoneal injections. DMP did not enhance the tumor yield of an established skin carcinogen when applied repeatedly to the skin of mice. Mutagenic activity was observed in Salmonella typhimurium (Ames test). There was apparently some evidence of chromosome damage in the liver cells of rats given repeated skin application of DMP but not in the bone marrow cells of mice treated by single injection. In cultured Chinese hamster ovary cells, DMP induced sister-chromatid exchanges in only the presence of metabolic activation. DMP did not induce chromosomal aberrations, with or without metabolic activation, in cultured Chinese hamster ovary cells. Therefore, DMP is mutagenic only in certain in vitro studies after metabolism. This is probably due to the formation of a reactive species such as formaldehyde. Since DMP is not mutagenic in vivo, any reactive metabolites appear to be quickly detoxified. ECOTOXICITY STUDIES: 100 ppm DMP were acutely toxic to Palaemonetes pugio (grass shrimp) larvae. DMP at a concn of 100 ppm significantly increased the duration of larval development to the first postlarval stage. Bioavailability of phthalate congeners, including/ dimethyl phthalate to earthworms (Eisenia fetida) was studied when earthworms were exposed to two artificially contaminated agricultural and forest soils. DMP was not detected in earthworms.Phthalate esters are endocrine disruptors. They decrease foetal testis testosterone production and reduce the expression of steroidogenic genes by decreasing mRNA expression. Some phthalates have also been shown to reduce the expression of insulin-like peptide 3 (insl3), an important hormone secreted by the Leydig cell necessary for development of the gubernacular ligament. Animal studies have shown that these effects disrupt reproductive development and can cause a number of malformations in affected young. (A2883)
Average Daily IntakeThe total average daily intake of dimethyl phthalate was 79.1 ng/kg body weight/day based on food, water, and indoor and outdoor air concentrations reported for Paris, Francecomponent daily intakes were 0.185, 76 and 2.92 ng/kg body weight/day for water, food and air, respectively(1).
Ökotoxizitätsauszüge/AQUATIC SPECIES/ /In a 21-day experiment in Daphnia magna (water flea)/ reproduction was not significantly different from the control in any exposure concentration. Therefore the NOEC and LOEC are based on survival, which was the more sensitive endpoint. LOEC = 23 mg/L, NOEC = 9.6 mg/L. ... /Water/ hardness was 150 to 180 mg/L as CaC03alkalinity ranged from 100 to 130 mg/L CaC03pH ranged from 7.9 to 8.3and temperature was 21 + or - 2 °C. Dissolved oxygen concentration was greater than 60% saturation and specific conductance was 400 to 600 ... /umoh/cm/./AQUATIC SPECIES/ /In a 60-day flow-through experiment/ Oncorhynchus mykiss (rainbow trout) fry survival and growth (length and weight) were evaluated as the biological endpoints. ... The NOEC was reported as 11 mg/Lthe LOEC was reported as 24 mg/L .../AQUATIC SPECIES/ Tests were performed with the freshwater invertebrates Hyalella azteca, Chironomus tentans, and Lumbriculus variegatus to determine the acute toxicity of six phthalate esters, including dimethyl phthalate (DMP) ... 10-d LC50 (lethal concentration for 50% of the population) values ... for ... DMP... were 28.1 ... mg/Lfor H. azteca68.2 ... mg/L for C. tentansand 246 ... mg/L for L. variegatus, respectively./AQUATIC SPECIES/ The degradation of phthalic acid diesters may lead to formation of o-phthalic acid and phthalic acid monoesters. The ecotoxic properties of the monoesters have never been systematically investigated, and concern has been raised that these degradation products may be more toxic than the diesters. Therefore, the aquatic toxicity of phthalic acid, six monoesters, and five diesters of o-phthalic acid was tested in three standardized toxicity tests using the bacteria Vibrio fischeri, the green algae Pseudokirchneriella subcapitata, and the crustacean Daphnia magna. The monoesters tested were monomethyl, monoethyl, monobutyl, monobenzyl, mono(2-ethylhexyl), and monodecyl phthalate, while the diesters tested were dimethyl, diethyl, dibutyl, butylbentyl, and di(2-ethylhexyl)phthalate, which were assumed to be below their water solubility. The median effective concentration (EC50) values for the three organisms ranged from 103 mg/L to >4.710 mg/L for phthalic acid, and corresponding values for the monoesters ranged from 2.3 mg/L (monodecyl phthalate in bacteria test) to 4,130 mg/L (monomethyl phthalate in bacteria test). Dimethyl and diethyl phthalate were found to be the least toxic of the diesters (EC50 26.2-377 mg/L), and the toxicity of the other diesters (butylbenzyl and dibutyl phthalate) ranged from 0.96 to 7.74 mg/L. In general, the phthalate monoesters (degradation products) were less toxic than the corresponding diesters (mother compounds).For more Ecotoxicity Excerpts (Complete) data for DIMETHYL PHTHALATE (10 total), please visit the HSDB record page.
FIFRA-AnforderungenAs the federal pesticide law FIFRA directs, EPA is conducting a comprehensive review of older pesticides to consider their health and environmental effects and make decisions about their continued use. Under this pesticide reregistration program, EPA examines newer health and safety data for pesticide active ingredients initially registered before November 1, 1984, and determines whether the use of the pesticide does not pose unreasonable risk in accordance to newer saftey standards, such as those described in the Food Quality Protection Act of 1996. Pesticides for which EPA had not issued Registration Standards prior to the effective date of FIFRA '88 were divided into three lists based upon their potential for human exposure and other factors, with List B containing pesticides of greater concern than those on List C, and with List C containing pesticides of greater concern than those on List D. Dimethyl phthalate is found on List C. Case No: 3112Case Status: No products containing the pesticide are actively registered ... The case /is characterized/ as "cancelled." Under FIFRA, pesticide producers may voluntarily cancel their registered products. EPA also may cancel pesticide registrations if registrants fail to pay required fees or make/meet certain reregistration commitments, or if EPA reaches findings of unreasonable adverse effects.Active ingredient (AI): Dimethyl phthalateAI Status: The active ingredient is no longer contained in any registered pesticide products ... "cancelled."
LuftstandardsListed as a hazardous air pollutant (HAP) generally known or suspected to cause serious health problems. The Clean Air Act, as amended in 1990, directs EPA to set standards requiring major sources to sharply reduce routine emissions of toxic pollutants. EPA is required to establish and phase in specific performance based standards for all air emission sources that emit one or more of the listed pollutants. Dimethyl phthalate is included on this list.
CERCLA-MeldepflichtmengenPersons in charge of vessels or facilities are required to notify the National Response Center (NRC) immediately, when there is a release of this designated hazardous substance, in an amount equal to or greater than its reportable quantity of 5000 lb or 2270 kg. The toll free number of the NRC is (800) 424-8802. The rule for determining when notification is required is stated in 40 CFR 302.4 (section IV. D.3.b).
Clean Water Act AnforderungenFor the protection of human health from the toxic properties of dimethyl phthalate ingested through water and contaminated aquatic organisms, the ambient water criterion is determined to be 313 mg/l.For the protection of human health from the toxic properties of dimethyl phthalate ingested through contaminated aquatic organisms alone, the ambient water criterion is determined to be 2.9 g/L.
Landesrichtlinien für Trinkwasser(FL) FLORIDA 70,000 ug/L(MN) MINNESOTA 70,000 ug/L
Berufliche Expositionsstufe (OEB)B
Arbeitsplatzgrenzwert (OEL)TWA: 5 mg/m3
Wassergefährdungsklasse (WGK)1
Sofort lebensgefährliche Konzentration2,000 mg/m3
TSCA-Inventar-StatusTSCA listed
UN-TransportnummerUN 3082
Zollcode2917 34 00
RTECS-Nr.TI1575000
R-Sätze (R)20/21/22-36/37/38-39/23/24/25-23/24/25-11-52
ToxizitätLD50 in mice, rats, guinea pigs (ml/kg): 7.2, 6.9, 2.4 orally (Draize)
GefahrensymboleF,T
Sicherheitshinweise (S)24/25-45-36/37-16-7
Gefahrenklasse9
Lagerklasse10 - Combustible liquids
Gefahrstoffdaten131-11-3(Hazardous Substances Data)
Selbstentzündungstemperatur460 °C DIN 51794

Anwendungen & Verwendung

Beschreibung

Dimethyl phthalate (DMP) is a member of the group of esters of phthalic acid commonly known as phthalates, used ubiquitously as solvents and plasticisers worldwide. Phthalates are plasticizers, and increase the flexibility of plastics. They are also found in deodorant formulations, perfumes, emollients and insect repellents.

History

Screened during World War II, this repellent is exceptionally effective against A. aegypti, lasting 196 d on cloth. Tests have been run against the newer pests A. albopictus and A. aegypti, including five repellents containing DEET (test standard), a controlled release formulation containing DEET, two dosages of DEET in ethanol, and Avon Skin-So- Soft. On the skin, the repellent chemicals provide significant protection from biting; however, A. albopictus is more sensitive to repellents than A. aegypti.

Verwenden

Dimethyl Phalate is the methyl ester of phthalic acid. Dimethyl phthalate is an ectoparasiticide and has many other uses, including in solid rocket propellants, plastics, and insect repellents.