Grundinformationen
- CAS
13530-50-2- Standard-SMILES
O=P([O-])(O)O.O=P([O-])(O)O.O=P([O-])(O)O.[Al+3]- InChIKey
RGPUVZXXZFNFBF-UHFFFAOYSA-K- Summenformel
- AlH6P3O12
- Durchschnittliche Molmasse
- 317,94 g/mol
- Monoisotopische Masse
- 317,88875
Überblick
See also: Phosphoric acid, aluminium salt (3:1) (annotation moved to).
Namen und Bezeichner
- Bevorzugter Name
- Phosphoric acid, aluminum salt (3:1)
- IUPAC
- aluminum tris(dihydrogen phosphate)
- Lokaler Name
- Aluminiumtris(dihydrogenphosphat)
- Englischer Name
- Aluminum dihydrogen phosphate
- Summenformel
- AlH6O12P3
- Molmasse
- 317.94
Namen und Synonyme
Aluminium tris(dihydrogen phosphate)Phosphoric acid, aluminum salt (3:1)EINECS 236-875-2EC 236-875-2236-875-2RefChem:862452Aluminium dihydrogen phosphate13530-50-2Aluminum dihydrogen phosphateAluminum phosphate monobasicAluminiumphosphatebasicaluminum;dihydrogen phosphate
Weitere Namen anzeigen
Phosphoricacid,aluminumsalt(3:1)Aluminium phosphate,monobasicaluminumdihydrogenphosphatesolution50%inwaterMonobasicsolutionpurumMONOALUMINIUMPHOSPHATE
diphosphonooxyalumanyl dihydrogen phosphatealuminum trisdihydrogenphosphateAluminum phosphate (Al(H2PO4)3)Aluminum dihydrogen phosphate solutionSCHEMBL186335DTXSID2094005AKOS015904169NS00074403
Datenbank-Bezeichner
- CAS
13530-50-2- PubChem CID
- 9818426
Eigenschaften
Berechnete Struktureigenschaften
- Polarare Oberfläche (TPSA)
- 242 Ų
- H-Brücken-Donoren
- 6
- H-Brücken-Akzeptoren
- 12
- Frei drehbare Bindungen
- 0
- Schwere Atome
- 16
- Formalladung
- 0
- Komplexität
- 49,8
Experimentelle und physikochemische Eigenschaften
PolymersPlastics -> Pigments agents
Density2.4 @25 °C
Physical DescriptionDry Powder; Liquid; Liquid
Physikochemische Eigenschaften
- Dichte
- 1.5 g/mL · 1.5 g/mL at 20 °C
- Dampfdruck
- 0 Pa · 0Pa at 20℃
- Aggregatzustand
- Liquid
- Wichte
- 1.5 · 1.5
- Farbe
- Colorless
- Wasserlöslichkeit
- Soluble in water and ethanol. Insoluble in acetone.
- InChI
- InChI=1S/Al.3H3O4P/c;3*1-5(2,3)4/h;3*(H3,1,2,3,4)/q+3;;;/p-3
- InChIKey
- RGPUVZXXZFNFBF-UHFFFAOYSA-K
- SMILES
- P([O-])(=O)(O)O.P([O-])(=O)(O)O.P([O-])(=O)(O)O.[Al+3]
- CAS Datenbank
- 13530 · 13530-50-2(CAS DataBase Reference)
Sicherheit und Regulatorisches
Sicherheitsangaben dienen nur zur Orientierung und ersetzen weder das Sicherheitsdatenblatt (SDB) des Lieferanten noch geltende Vorschriften oder eine fachliche Bewertung.
GHS-Klassifizierung
GHS Classification
This chemical does not meet GHS hazard criteria for 23% (48 of 209) of reports.
Danger
H318 (74.2%): Causes serious eye damage [Danger Serious eye damage/eye irritation]
P264+P265, P280, P305+P354+P338, and P317 (click each P-code to see the statement)
Aggregated GHS information provided per 209 reports by companies from 6 notifications to the ECHA C&L Inventory.
Gefahrenhinweise
Regulatory Information
Phosphoric acid, aluminum salt (3:1) is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Phosphoric acid, aluminum salt (3:1) are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)
REACH registered substance: Aluminium tris(dihydrogen phosphate) (EC: 236-875-2)
Phosphoric acid, aluminum salt (3:1): Does not have an individual approval but may be used under an appropriate group standard
Hazard Classes and CategoriesEye Dam. 1 (74.2%)
Sicherheit und Schutzausrüstung
Protective Action Criteria (PAC)
3.0 [mg/m3]
30 [mg/m3]
150 [mg/m3]
Sicherheitsdaten
- F
- 3
- wgk
- 3
- tsca
- TSCA listed
Chemie und Industrie
Verwendung und Herstellung
U.S. Production2023: 50,000 - <250,000 lb
Consumer UsesNot Known or Reasonably Ascertainable
Industry UsesOther
Use ClassificationPlastics -> Pigments agents
General Manufacturing Information
Fabricated Metal Product Manufacturing
Phosphoric acid, aluminum salt (3:1): ACTIVE
Anwendungen
BeschreibungAluminum dihydrogen phosphate (ADP) is a thermosetting material whose cementation mechanism belongs to condensation polymerization. Compared with pure Al foam, composite foam with ADP undergoing sintering shows an increase in compressive yield strength and compressive strength, elevates the plateau stress, and exhibits a superior energy absorption capacity. Nevertheless, the length of the plateau region has been shortened by degree as the ADP content is more than 7.5 mass%[1]. ADP is used to produce refractory materials due to its unique properties. When mixed with alumina or aluminum hydroxide, ADP reacts to form a strong, ceramic-like material that is highly resistant to heat and wear. This material is known as aluminum phosphate cement (APC) or phosphate-bonded alumina. One of the most common applications of APC is in the lining of furnaces and kilns. The material can withstand temperatures up to 1700°C, making it suitable for high-temperature industrial processes such as metal smelting and glass production. APC is also used to produce refractory bricks, which line the walls of furnaces and kilns.
VerwendenAluminum dihydrogen phosphate is used as intermediates and solid separation agents. It is also used in petroleum, chemical industry, shipbuilding, space technology, electric industry, high-temperature kilns, heat treatment resistance furnaces and electric insulation. Further, it is used as inorganic coating.
Zugehörige Reaktionen
2
Notizen zur Verbindung
Wird geladen…